Restraining the aggregation of photoluminescent 1‐pyrenecarboxylic acid by hydrogen bonding to poly(methyl methacrylate)

Hydrogen bonds between the carboxylic acid in photoluminescent 1‐pyrenecarboxylic acid (PCA) and the ester carbonyl group in poly(methyl methacrylate) (PMMA) can be used to restrain the aggregation of the fluorescent PCA molecules and to enhance the emission efficiency of the resulting PMMA/PCA films. Primarily, PCA is added to PMMA in THF (or in toluene) to make homogeneous mother solutions for the further preparation of solid PMMA/PCA films. The concentration and chain conformation of PMMA in the mother solution are crucial to controlling the dispersion of PCAs in solution and, therefore, the extent of aggregation in the so‐derived films. The results from solution emissions suggest that PCAs in dilute solutions are easy to disperse, and less PMMA is required for the effective exclusion of aggregation in comparison with PCAs in concentrated solutions. In addition, the solvents THF and toluene play different roles in the arrangement of the PMMA chains and the emission behavior of the incorporated PCA in the dilute and semidilute regimes. With appropriate solution preparation conditions, the resulting films have photoluminescence quantum efficiencies ranging from 0.83 to 0.93, and the best value of 0.93 has been obtained from a film containing a small PCA content of 0.24 wt %. This result indicates that the fluorophore arrangements, rather than the content, govern the final emission efficiency. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 920–929, 2007     

Viscometric investigation of intramolecular hydrogen bonding cohesional entanglement in extremely dilute aqueous solution of poly vinyl alcohol

An investigation of influence of cryogenic treatment on extremely dilute aqueous solution of poly(vinyl alcohol) (PVA) was performed by viscometry. The solution was frozen in liquid nitrogen or in a freezer at −25°C, then thawed at ambient temperature and concentrated by evacuation. The viscosity of the solution was measured using the dilute method. The experimental results indicated that the viscosity of the solution is related to N, the times of the freezing and thawing cycle, and the temperature for freezing. Undergoing a treatment of freezing and thawing, the viscosity of the solution is decreased, while it can be recovered the value of before the treatment as the solution had been heated at a high temperature. Thus, a conclusion may be obtained; that is, for an extremely dilute aqueous solution of PVA, which concentration is below C_gel, threshold concentration for gelation, an intramolecular hydrogen bonding cohesional entanglement can be formed by freezing as N < 5. However, in the case of N > 5, it not only formed an intramolecular hydrogen bonding but also produced an intermolecular hydrogen bonding. At the same time, the abnormal behavior of reduced viscosity of the solution in extremely dilute concentration region has been explained. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 2421–2427, 1997     

Solution properties of NR/PU block copolymers by size‐exclusion chromatography and viscometry

Soluble block copolymers based on natural rubber and polyurethane oligomers derived from 1,3 butane diol and toluene diisocyanate were synthesized for the first time. The dilute solution properties of these block copolymers dissolved in tetrahydrofuran (THF) were studied by viscometry and gel permeation chromatography (GPC). The Mark–Houwink constants K and a of the block copolymer system were determined by the molecular weight data from GPC combined with the viscosity data. Both the values were found to be in the range usually given by flexible elastomers. The intrinsic viscosity values were found to decrease successively with a decrease in the NCO/OH ratio from 1.12 to 1.05. The unperturbed chain parameters, K_θ and B were determined from the viscosity data. The K_θ calculated was used to get the unperturbed end‐to‐end distance and radius of gyration of the block copolymer systems in THF. The viscosity data were also used to study the chain conformation in dilute solutions. It was found that the molecules adopt a compressed core and shell conformation in which the higher molecular weight component, NR, forms the shell, which compresses the PU core. All the block copolymers assume a compressed segregated core and shell model which changes to a partially segregated core and shell conformation, or partially Gaussian conformation, at the transition temperature located at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2104–2111, 2006     

Supramolecular structures of poly(γ-benzyl-L-glutamate) self-assembled on mica surface

This article reports the results of structural studies of poly (γ-benzyl-L -glutamate) (PBLG) layers self-assembled from dilute solutions in organic solvents on mica surface. Polarized dynamic light scattering and atomic force microscopy were used to study polymer properties in solutions and on the surface. The hierarchy of self-assembly from PBLG solutions in different solvents was investigated as a function of polymer concentration and solvent polarity. We show that the surface–polymer interaction is suppressed in polar solvents that is interpreted in terms of suppressed charge–dipole interaction. The transformation of the PBLG surface structure occurs upon addition of different amounts of trifluoroacetic acid to polymer solution in dioxane. Rigid-rod PBLG molecules experience rod–globular transition while assembling on nonmodified mica from the very dilute solutions. A scheme is proposed describing different stages of PBLG fibrogenesis on a charged surface. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1567–1577, 1998     

Hydrodynamic properties of A8B8 type miktoarm (Vergina) stars

The dilute solution properties of three (PS)₈(PI)₈ miktoarm (Vergina) stars were investigated by viscometry and dynamic light scattering in toluene and tetrahydrofuran (THF) (common good solvents), cyclohexane at 34.5°C (theta solvent for PS and good for PI) and dioxane at 34°C (theta solvent for PI and good for PS). Experimental intrinsic viscosity [η] and hydrodynamic radii, R_h, values in all solvents were larger for the miktoarm stars in comparison to the calculated ones using a simple model which describes the size of the copolymers as a weighted average of the sizes of the homopolymer stars with the same total molecular weight and number of arms as the copolymer. This expansion is discussed on the basis of the increased number of heterocontacts, the topological constrains imposed by the common junction point in this highly branched miktoarm architecture and the asymmetry in molecular weights of the different kinds of arms. The conformation adopted in dilute solutions can explain, to some extent, the morphological results obtained on the same materials. The ratios of viscometric to hydrodynamic radii are consistent with previous investigations on linear and star polymers and in accord with the hard sphere model. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1329–1335, 1999     

Influence of aggregation on the phosphorescence of iridium complex in poly(methyl methacrylate) matrix

In this study, novel phosphorescent compound of iridium(III)bis(2,3‐diphenylquinoxaline)2‐(benzoimidazol‐2‐yl)pyridine (IrQB) was prepared and the emission study suggests the solid form of IrQB has less phosphorescence intensity than its solution in tetrahydrofuran (THF). To avoid the potential aggregation of IrQB in the concentrated state, poly(methyl methacrylate) (PMMA) was intentionally added as isolator to make solutions of different concentrations in THF and then solid films of IrQB/PMMA of different compositions after THF removal. Films of IrQB/PMMA prepared from dilute solutions exhibit two emission bands centered at 540 and 640 nm, respectively, which is in contrast to the sole 640‐nm emission band observed for films prepared from semidilute solutions. The 540‐ and 640‐nm bands show progressive variations of the intensity with temperature. Emission band at 540 nm is derived from the polarized optical microscope and is attributed to the IrQB aggregates, whose life‐time indicates it is phosphorescent in nature. This aggregate formation is strongly affected by the applied concentrations of IrQB and PMMA in the preparative solution state. Model to postulate the mechanism of aggregate formation in the solution and the derived film states is thereby presented in this study. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 631–639, 2008     

Light-scattering study of the coil-to-globule transition of linear poly(N-isopropylacrylamide) ionomers in water

The coil-to-globule transition of two poly(N-isopropylacrylamide) (PNIPAM) ionomers with different ionic contents (0.8 and 4.5 mol %), but similar weight average molar masses, in deionized water was investigated by a combination of static and dynamic light scattering. In spite of the large difference in their ionic contents, both the ionomers have a nearly same lower critical solution temperature (LCST, ∼ 32.5°C). At temperatures higher than the LCST, the ionomer chains undergo a simultaneous intrachain coil-to-globule transition and interchain aggregation to form nanoparticles thermodynamically stable in water. The average size of the nanoparticles decreases respectively as the ionic content increases and the ionomer concentration decreases. The interchain aggregation can be completely suppressed in an extremely dilute ionomer solution (< ∼ 5 × 10⁻⁶ g/mL), so that the intrachain coil-to-globule transition leads to the collapse of the ionomer chains into individual single-chain nanoparticles. Our results clearly indicate that there is a hysteresis in the colling process (the globule-to-coil transition). © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1501–1506, 1998     

Transformation of the cationic growing center of poly(tetrahydrofuran) into an anionic one by bis(pentamethylcyclopentadienyl)samarium

Transformation of the cationic growing center of living poly(tetrahydrofuran) [poly(THF)] into an anionic one was achieved in high efficiency (62%) by the end-capping of living poly(THF) with potassium iodide followed by the reduction with bis(pentamethylcyclopentadienyl)samarium (Cp*₂Sm), whereas the direct reduction with Cp*₂Sm without the end-capping resulted in the formation of poly(THF) with pentamethylcyclopentadienyl group at the terminal. The increase in the molecular weight of poly(THF) after the reduction was observed, which indicates the presence of the dimerization of poly(THF) during the reduction. The polymerization of a variety of electrophilic monomers including δ-valerolactone, 2-oxo-1,3-dioxane, and alkyl methacrylates with the macroanion provided good yields of the corresponding block copolymers consisting of both cationically and anionically polymerizable monomers. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2209–2214, 1998     

Synthesis and characterization of a family of biodegradable poly(ester amide)s derived from glycine

A series of aliphatic poly(ester amide)s derived from 1,6-hexanediol, glycine, and diacids with a variable number of methylenes (from 2 to 8) have been synthesized and characterized. Infrared spectroscopy shows that the studied polymers present a unique kind of hydrogen bond that is established between their amide groups. Thermal properties as melting, glass transition, and decomposition temperatures are reported. The data indicate that all the polymers are highly crystalline. Thus, different kinds of spherulites (positive and/or negative) were obtained depending on the preparation conditions and on the polymer samples. Moreover, all the polymers crystallized from dilute diol solutions as ribbonlike crystals where a regular folding habit and a single hydrogen bond direction could be deduced. A test of enzymatic hydrolysis was employed to assess the potential biodegradability of these polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1271–1282, 1998     

Synthesis of chromo‐ and fluorogenic poly(ortho‐diaminophenylene) chemosensors for fluoride anion

Two new poly(ortho‐diaminophenylene) derivatives containing fluorene and/or quinoxaline moieties per repeat unit in the main chain were synthesized via Suzuki coupling reaction followed by reduction process. The synthesized polymers were characterized and explored as colorimetric and fluorometric anion‐sensing materials. The polymers in dilute tetrahydrofuran (THF) solution emitted green light (about 530 nm) in their precursor benzothiadiazole forms and blue to green light (477–523 nm) in their reduced forms. The color of polymer solution was dramatically altered upon addition of fluoride anion without noticeable absorption change in UV–vis spectrum. The fluorescence was ratiometrically quenched with a linear relationship between fluorescence intensity and fluoride anion concentration implying static quenching mechanism could be applied judging from the maintenance of constant fluorescence lifetime with variable fluoride anion concentration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1546–1556, 2007     

Thermodynamic properties of novolac-type phenolic resin blended with poly(ethylene oxide)

The thermodynamic properties of novolac type phenolic resin blended with poly(ethylene oxide) (PEO) were investigated by the Painter–Coleman association model (PCAM). Equilibrium constants and enthalpy corresponding to the interaction between phenolic and poly(ethylene oxide) were calculated from the Fourier transform infrared spectroscopy of low molecular weight analogues in dilute solutions. The association parameters of the model compounds are transferred to the corresponding polymers, to predict the Gibbs free energy, phase behavior, and the degree of hydrogen bonding in the polymer blend. The heat capacity (C_P) and the excess heat capacity (ΔC_P) are used to verify the validity of PCAM model on predicting the thermodynamics properties of phenolic/PEO blend. It is found that the hydrogen bonding interaction dominates at moderate temperatures, which is outweighed by the dispersion force at higher temperature or high PEO compositions. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1647–1655, 1998     

Aggregation of poly(1,3‐cyclohexadiene): Effects of molecular weight and polymer chain structure

The aggregation of poly(1,3‐cyclohexadiene) (PCHD), obtained by anionic polymerization with alkyllithium/amine systems, was examined using size exclusion chromatography (SEC) and size exclusion chromatography coupled with a multiangle laser light scattering photometer (SEC‐MALS). The PCHD polymer chain has a structure consisting of a main chain formed by 1,2‐addition (the 1,2‐CHD unit) and 1,4‐addition (the 1,4‐CHD unit). Mild stirring with relatively low temperature in the polymerization reaction forms an aggregation of PCHD. The molecular weight and molar ratio of 1,2‐CHD/1,4‐CHD units in the polymer chain strongly influence the aggregation of PCHD. In a high molecular weight PCHD, containing ～50% 1,2‐CHD units, an aggregation of the polymer was observed in tetrahydrofuran (THF) solution at room temperature. This aggregation of PCHD was soluble in 1,2,4‐trichlorobenzene (TCBz) and could be separated into each polymer molecule. In contrast, a polymer chain with a high content of 1,4‐CHD units having a relatively low cis‐stereospecificity was easily soluble in THF and TCBz without aggregating. A long polymer chain structure with a high content of 1,2‐CHD units is considered to be the reason for the generation of strong intermolecular forces contributing to the aggregation of PCHD with the solvophobic interactions. The degree of aggregation could be controlled by the conditions of the PCHD polymer solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1442–1452, 2006     

Synthesis and characterization of polysilabutane having oligo(oxyethylene)phenyl groups on the silicon atom

A new class of polar polysilabutanes with mono- or tri-(oxyethylene)phenyl groups on the silicon atom have been synthesized by anionic polymerization of silacyclobutanes having ω-(t-butyldimethylsilyl-protected) mono- or tri-(oxyethylene)phenyl groups and subsequent deprotection of the silyl groups. The monomers were synthesized by treatment of 1,1-dichlorosilacyclobutane with ω-(t-butyldimethylsilyl-protected) mono- or tri-(oxyethylene)phenyl Grignard reagents. Anionic polymerization of silacyclobutane was performed with butyllithium initiator in THF. t-Butyldimethylsilyl-protecting groups at polymer pendant groups were hydrolyzed with tetrabutyl ammonium fluoride in water-containing THF. The obtained polysilabutanes were soluble in a polar organic solvent such as methanol, and their mass distributions were analysed by matrix-assisted laser-desorption-ionization mass spectrometry (MALDI TOF MS). © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 225–231, 1998     

Synthesis of poly(styrene-b-tetrahydrofuran-b-styrene) triblock copolymers by transformation from living cationic into living radical polymerization using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl as a transforming agent

Synthesis of poly(styrene-b-tetrahydrofuran (THF)-b-styrene) triblock copolymers was performed by transformation from living cationic into living radical polymerization, using 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl (4-hydroxy-TEMPO) as a transforming agent. Sodium 4-oxy-TEMPO, derived from 4-hydroxy-TEMPO, reacted with the living poly(THF), which was prepared by cationic polymerization of THF using trifluoromethanesulfonic acid anhydride as an initiator, resulting in quantitative formation of the poly(THF) with TEMPO at both the chain ends. The resulting polymers were able to serve as a polymeric counter radical for the radical polymerization of styrene by benzoyl peroxide, to give the corresponding triblock copolymer in quantitative efficiency. The polymerization was found to proceed in accordance with a living mechanism, because the conversion of styrene linearly increased over time, and the molar ratio of styrene to THF units in the copolymer also increased as a result of increasing the conversion. The TEM pictures demonstrated that the resulting copolymers promoted microphase segregation. It was found that the films of these copolymers showed contact angles intermediate between those of poly(THF) and of polystyrene. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2059–2068, 1998     

Branched versus linear oligo(dimethylsiloxane): Differences in their thermodynamic interaction with solvents

The thermodynamic behavior of linear and of branched oligo(dimethylsiloxane) (O‐DMS) solutions was studied by means of vapor pressure measurements and vapor pressure osmometry at different temperatures for the thermodynamically favorable solvent THF. The branched material required for that purpose was synthesized and afterwards fractionated by means of the single solvent acetone to eliminate components of low degrees of branching. The Flory‐Huggins interaction parameters, χ, for the systems THF/O‐DMS as a function of composition pass a minimum at all temperatures (25, 40, and 60 °C) in the case of the branched material. For the unbranched oligomer such a minimum is only observed at 60 °C. At 40 °C the results are ambigous whereas the dependence is definitely linear at 25 °C. This exceptional behavior of the linear product at the latter temperature is tentatively attributed to the formation of favorable orientational order in the pure state under these conditions. At high oligomer concentrations THF interacts more favorably with the branched material, however, this preference is reversed upon dilution. All measured composition dependencies of χ can be modeled quantitatively by an approach accounting for chain connectivity and for the ability of the oligomers to change their conformation upon dilution. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1309–1318, 2010     

Cross-linking of poly[1-(trimethylsilyl)-1-propyne] membranes using bis(aryl azides)

Cross-linkable poly[1-(trimethylsilyl)-1-propyne] (PTMSP) films were cast from toluene solutions containing PTMSP and either 4,4′-diazidobenzophenone or 4,4′-(hexafluoroisopropylidene)diphenyl azide. The composite films were clear and homogeneous and were cross-linked by UV irradiation at room temperature or thermal annealing at 180°C. Low levels of the bis(aryl azide) (1–5 wt %) were effective in rendering the films insoluble in toluene and THF, both good solvents for PTMSP. The process is simple and effective, and thus PTMSP can be readily converted to mechanically stable membranes with permeabilities and separation factors comparable or higher than those of poly(dimethylsiloxane). The films were characterized by measuring their density, their permeability toward O₂ and N₂, and their spectroscopic properties. Compared to PTMSP, films containing bis(aryl azide) cross-linkers had lower permeabilities and higher separation factors, consistent with a reduction in free volume. When the films were cross-linked photochemically, the permeabilities declined further and the separation factor increased. Films cross-linked thermally had permeabilities comparable to their PTMSP/azide precursors, and density and swelling measurements suggest that higher free volumes are obtained in thermally cross-linked films. All films stored in air suffered from a slow decline in permeability which may reflect slow surface oxidation of the films. When stored in vacuum, cross-linked films were stable and showed no loss in permeability, but the permeability of uncross-linked PTMSP films stored under the same conditions fell to 70% of their original value in 1 month. We attribute the permeability decline to densification accelerated by impurities and solvents. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 959–968, 1998     

(Diisopropylamido) bis (methylcyclopentadienyl) lanthanides as single-component initiators for polymerization of methyl methacrylate

It was first found that (diisopropylamido)bis(methylcyclopentadienyl)lanthanides (MeC₅H₄)₂LnN(i-Pr)₂(THF) (Ln = Yb ( 1 ), Er ( 2 ), Y ( 3 )) exhibit extremely high catalytic activity in the polymerization of methyl methacrylate. The reactions can be carried out over a quite broad range of polymerization temperatures from -78 to 40°C. The catalytic activity of the complexes increases with an increase of ionic radii of the metal elements, i.e. Y > Er > Yb. The results of GPC (gel permeation chromatography) indicate that the number-average molecular weights (M_n) of polymers obtained exceed 100 × 10³ and the molecular weight distribution (M_w/M_n) becomes broad with the increase of temperature. Furthermore highly syndiotactic PMMA (87.7%) can be obtained by lowering the reaction temperature to −78°C. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1593–1597, 1998     

Fabrication of well‐developed nano‐ribbons composed of hierarchically grown isotactic poly(methyl methacrylate) crystals on substrates

Well‐developed nano‐ribbons composed of isotactic poly(methyl methacrylate) (it‐PMMA) were successfully fabricated on mica via a simple solution‐casting method. Typical morphologies with about 0.6 nm thickness and 30–40 nm widths, thermal stability, and alternative structural analyses suggested that nano‐ribbons were composed of two‐dimensional folded chain crystals of it‐PMMA. Typically, nano‐ribbons were developed by incubating tetrahydrofuran (THF) solutions at 20 °C for at least 2 months, more than equi‐amounts of water were added to incubated THF solutions, and solutions were cast onto mica. It was found that, after the aforementioned incubation of THF solutions, it‐PMMA chains adopted trans‐trans (tt) conformations, which are precursors for it‐PMMA crystals, suggesting that THF is a unique solvent for it‐PMMA. By adding water, a poor solvent for it‐PMMA, to THF solutions, it‐PMMA aggregates formed with several hundreds of nanometer sizes, further promoting an increase in the population of the tt conformation. Nano‐ribbons were similarly formed on silicon wafer substrates, suggesting that hydrophilic substrates were essential for the formation of nano‐ribbons. Interestingly, a modulation of the above described method, with the slight evaporation of THF from a THF/water solution before casting onto mica, succeeded in the development of epitaxially adsorbed nano‐ribbons. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3098–3110, 2009     

Synthesis of a novel poly(para‐phenylene ethynylene) for highly selective and sensitive sensing mercury (II) ions

A new poly(p‐phenylene ethynylene) derivative with pendant 2,2′‐bipyridyl groups and glycol units (PPE‐bipy) has been prepared, and its metal ion sensing properties were investigated. The polymer of PPE‐bipy exhibited high selectivity for Hg²⁺ as compared with Li⁺, Na⁺, K⁺, Ba²⁺, Ca²⁺, Mg²⁺, Al³⁺, Mn²⁺, Ag⁺, Zn²⁺, Pb²⁺, Ni²⁺, Cd²⁺, Cu²⁺, Co,²⁺ and Fe³⁺ in THF/EtOH (1:1, v/v) solution. The fluorescence of PPE‐bipy was efficiently quenched by Hg²⁺ ions, and the detection limit was found to be 8.0 nM in a THF/EtOH (1:1, v/v) solvent system. PPE‐bipy also showed a selective chromogenic behavior toward Hg²⁺ ions by changing the color of the solution from slight yellow to colorless, which can be detected with the naked eye. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1998–2007, 2008     

Induced changes of polymer organization in a gel of poly(vinyl alcohol) crosslinked by Congo red

Different gel microstructures are induced at variable poly(vinyl alcohol) (PVA) and Congo red concentrations, as revealed by ultrarapid freezing and a replica technique for transmission electron microscopy. The polymer microstructures observed include random coils, rigid polymer rods, and long fibers. The development of the different polymer conformations is proposed to be dependent on the degree of intramolecular and intermolecular crosslinking and on the electrostatic interactions of the Congo red ions. The rigid‐rod conformation appears to be the most energetically stable form; it is disrupted by electrostatic effects around the polymer overlap concentration (C*_PVA). We propose that the gel microstructure influences the physical properties of the gel. Gels possessing the rigid‐rod microstructure have increased Young's storage modulus values. Two possible mechanisms of gelation are suggested. The first describes a one‐stage reaction when the polymer concentration approximates C*_PVA, where polymers in an extended random‐coil conformation undergo intermolecular crosslinking without any microstructural changes. The second describes a two‐stage reaction when the polymer concentration is less than or greater than C*, where a disorder–order transition results in the formation of rigid polymer rods and fibers followed by the formation of a macromolecular network. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1471–1483, 2001