A site-isolated rhodium-diethylene complex supported on highly dealuminated Y zeolite: synthesis and characterization

The reaction of Rh(C2H4)2(acac) with the partially dehydroxylated surface of dealuminated zeolite Y (calcined at 773 K) and treatments of the resultant surface species in various atmospheres (He, CO, H2, and D2) were investigated with infrared (IR), extended X-ray absorption fine structure (EXAFS), and 13C NMR spectroscopies. The IR spectra show that Rh(C2H4)2(acac) reacted readily with surface OH groups of the zeolite, leading to loss of acac ligands from the Rh(C2H4)2(acac) and formation of supported mononuclear rhodium complexes, confirmed by the lack of Rh-Rh contributions in the EXAFS spectra; each Rh atom was bonded on average to two oxygen atoms of the zeolite surface with a Rh-O distance of 2.19 A. IR, EXAFS, and 13C NMR spectra show that the ethylene ligands remained bonded to the Rh center in the supported complex. Treatment of the sample in CO led to the formation of site-isolated Rh(CO)2 complexes bonded to the zeolite. The sharpness of the nu(CO) bands in the IR spectrum gives evidence of a nearly uniform supported Rh(CO)2 complex and, by inference, the near uniformity of the mononuclear rhodium complex with ethylene ligands from which it was formed. The supported complex with ethylene ligands reacted with H2 to give ethane, and it also catalyzed ethylene hydrogenation at 294 K.     

Synthesis and reactivity of dimethyl gold complexes supported on MgO: characterization by infrared and X-ray absorption spectroscopies

Dimethyl gold complexes bonded to partially dehydroxylated MgO powder calcined at 673 K were synthesized by adsorption of Au(CH3)2(acac) (acac is C5H7O2) from n-pentane solution. The synthesis and subsequent decomposition of the complexes by treatment in He or H2 were characterized with diffuse reflectance Fourier transform infrared (DRIFT), X-ray absorption near edge structure (XANES), and extended X-ray absorption fine structure (EXAFS) spectroscopies. The XANES results identify Au(III) in the supported complexes, and the EXAFS and DRIFTS data indicate mononuclear dimethyl gold complexes as the predominant surface gold species, consistent with the lack of Au-Au contributions in the EXAFS spectrum and the presence of nu(as)(CH3) and nu(s)(CH3) bands in the IR spectrum. EXAFS data show that each complex is bonded to two oxygen atoms of the MgO surface at an Au-O distance of 2.16 angstroms. The DRIFT spectra show that reaction of Au(CH3)2(acac) with MgO at room temperature also formed Mg(acac)2 and H(acac) species on the support. Treatment of the dimethyl gold complexes in He or H2 at increasing temperatures varying from 373 to 573 K removed CH3 ligands and caused aggregation forming zerovalent gold nanoclusters of increasing size, ultimately with an average diameter of about 30 angstroms. Analysis of the gas-phase products during the genesis of the gold clusters indicated formation of CH4 (consistent with removal of CH3 groups) and CO2 at 473-573 K, associated with decomposition of the organic ligands derived from acac species. O2 and CO2 were also formed in the decomposition of ubiquitous carbonates present on the surface of the MgO support.     

Oxide- and zeolite-supported isostructural ir(c(2)h(4))(2) complexes: molecular-level observations of electronic effects of supports as ligands

Zeolite Hβ- and γ-Al(2)O(3)-supported mononuclear iridium complexes were synthesized by the reaction of Ir(C(2)H(4))(2)(acac) (acac is acetylacetonate) with each of the supports. The characterization of the surface species by extended X-ray absorption fine structure (EXAFS) and infrared (IR) spectroscopies demonstrated the removal of acac ligands during chemisorption, leading to the formation of essentially isostructural Ir(C(2)H(4))(2) complexes anchored to each support by two Ir-O(support) bonds. Atomic-resolution aberration-corrected scanning transmission electron microscopy (STEM) images confirm the spectra, showing only isolated Ir atoms on the supports with no evidence of iridium clusters. These samples, together with previously reported Ir(C(2)H(4))(2) complexes on zeolite HY, zeolite HSSZ-53, and MgO supports, constitute a family of isostructural supported iridium complexes. Treatment with CO led to the replacement of the ethylene ligands on iridium with CO ligands, and the ν(CO) frequencies of these complexes and white line intensities in the X-ray absorption spectra at the Ir L(III) edge show that the electron density on iridium increases in the following order on these supports: zeolite HY < zeolite Hβ < zeolite HSSZ-53 ? γ-Al(2)O(3) < MgO. The IR spectra of the iridium carbonyl complexes treated in flowing C(2)H(4) show that the CO ligands were replaced by C(2)H(4), with the average number of C(2)H(4) groups per Ir atom increasing as the amount of iridium was increasingly electron-deficient. In contrast to the typical supported catalysts incorporating metal clusters or particles that are highly nonuniform, the samples reported here, incorporating uniform isostructural iridium complexes, provide unprecedented opportunities for a molecular-level understanding of how supports affect the electronic properties, reactivities, and catalytic properties of supported metal species.     

Surface‐Mediated Synthesis of Dimeric Rhodium Catalysts on MgO: Tracking Changes in the Nuclearity and Ligand Environment of the Catalytically Active Sites by X‐ray Absorption and Infrared Spectroscopies

The preparation of dinuclear rhodium clusters and their use as catalysts is challenging because these clusters are unstable, evolving readily into species with higher nuclearities. We now present a novel synthetic route to generate rhodium dimers on the surface of MgO by a stoichiometrically simple surface‐mediated reaction involving [Rh(C₂H₄)₂] species and H₂. X‐ray absorption and IR spectra were used to characterize the changes in the nuclearity of the essentially molecular surface species as they formed, including the ligands on the rhodium and the metal‐support interactions. The support plays a key role in stabilizing the dinuclear rhodium species, allowing the incorporation of small ligands (ethyl, hydride, and/or CO) and enabling a characterization of the catalytic performance of the supported species for the hydrogenation of ethylene as a function of the metal nuclearity and ligand environment. A change in the nuclearity from one to two Rh atoms leads to a 58‐fold increase in the catalytic activity for ethylene hydrogenation, a reaction involving unsaturated, but stable, dimeric rhodium species.     

Molecular heterogeneous catalysis: a single-site zeolite-supported rhodium complex for acetylene cyclotrimerization

By anchoring metal complexes to supports, researchers have attempted to combine the high activity and selectivity of molecular homogeneous catalysis with the ease of separation and lack of corrosion of heterogeneous catalysis. However, the intrinsic nonuniformity of supports has limited attempts to make supported catalysts truly uniform. We report the synthesis and performance of such a catalyst, made from [Rh(C(2)H(4))(2)(CH(3)COCHCOCH(3))] and a crystalline support, dealuminated Y zeolite, giving {Rh(C(2)H(4))(2)} groups anchored by bonds to two zeolite oxygen ions, with the structure determined by extended X-ray absorption fine structure (EXAFS) spectroscopy and the uniformity of the supported complex demonstrated by (13)C NMR spectroscopy. When the ethylene ligands are replaced by acetylene, catalytic cyclotrimerization to benzene ensues. Characterizing the working catalyst, we observed evidence of intermediates in the catalytic cycle by NMR spectroscopy. Calculations at the level of density functional theory confirmed the structure of the as-synthesized supported metal complex determined by EXAFS spectroscopy. With this structure as an anchor, we used the computational results to elucidate the catalytic cycle (including transition states), finding results in agreement with the NMR spectra.     

Molecular chemistry in a zeolite: genesis of a zeolite Y-supported ruthenium complex catalyst

Dealuminated zeolite Y was used as a crystalline support for a mononuclear ruthenium complex synthesized from cis-Ru(acac)2(C2H4)2. Infrared (IR) and extended X-ray absorption fine structure spectra indicated that the surface species were mononuclear ruthenium complexes, Ru(acac)(C2H4)2(2+), tightly bonded to the surface by two Ru-O bonds at Al(3+) sites of the zeolite. The maximum loading of the anchored ruthenium complexes was one complex per two Al(3+) sites; at higher loadings, some of the cis-Ru(acac)2(C2H4)2 was physisorbed. In the presence of ethylene and H2, the surface-bound species entered into a catalytic cycle for ethylene dimerization and operated stably. IR data showed that at the start of the catalytic reaction, the acac ligand of the Ru(acac)(C2H4)2(2+) species was dissociated and captured by an Al(3+) site. Ethylene dimerization proceeded approximately 600 times faster with a cofeed of ethylene and H2 than without H2. These results provide evidence of the importance of the cooperation of the Al(3+) sites in the zeolite and the H2 in the feed for the genesis of the catalytically active species. The results presented here demonstrate the usefulness of dealuminated zeolite Y as a nearly uniform support that allows precise synthesis of supported catalysts and detailed elucidation of their structures.     

Pt3Ru6 clusters supported on gamma-Al2O3: synthesis from Pt3Ru6(CO)21(mu3-H)(mu-H)3, structural characterization, and catalysis of ethylene hydrogenation and n-butane hydrogenolysis

The supported clusters Pt-Ru/gamma-Al2O3 were prepared by adsorption of the bimetallic precursor Pt3Ru6(CO)21(mu3-H)(mu-H)3 from CH2Cl2 solution onto gamma-Al2O3 followed by decarbonylation in He at 300 degrees C. The resultant supported clusters were characterized by infrared (IR) and extended X-ray absorption fine structure (EXAFS) spectroscopies and as catalysts for ethylene hydrogenation and n-butane hydrogenolysis. After adsorption, the nu(CO) peaks characterizing the precursor shifted to lower wavenumbers, and some of the hydroxyl bands of the support disappeared or changed, indicating that the CO ligands of the precursor interacted with support hydroxyl groups. The EXAFS results show that the metal core of the precursor remained essentially unchanged upon adsorption, but there were distortions of the metal core indicated by changes in the metal-metal distances. After decarbonylation of the supported clusters, the EXAFS data indicated that Pt and Ru atoms interacted with support oxygen atoms and that about half of the Pt-Ru bonds were maintained, with the composition of the metal frame remaining almost unchanged. The decarbonylated supported bimetallic clusters reported here are the first having essentially the same metal core composition as that of a precursor metal carbonyl, and they appear to be the best-defined supported bimetallic clusters. The material was found to be an active catalyst for ethylene hydrogenation and n-butane hydrogenolysis under conditions mild enough to prevent substantial cluster disruption.     

EFFECTS OF BINDERS ON THE PRODUCTION OF LIGHT ALKENES FROM SYNGAS OVER K-Fe-MnO/SILICALITE-2 CATALYST I. EFFECT OF VARIOUS BINDERS ON CO HYDROGENATION

The performance of the K-Fe-MnO/Si-2 catalyst for the production of light olefins via Co hydrogenation changes obviously with the addition of binders. The results of CO hydrogenation. TPR, Mossbauer spectra CI0TPF, CO/H2-TPSR and C2H4/H2-TPSR are employed to investigate the effects of various binders on the physical-chemical states and catalytic behaviors of K-Fe-MnO/Si-2 catalyst to produce light olefins via syngas, TiO2 can promote the reduction of Fe and strengthen the adsorption of CO resulting in raising olefin selectivity. Other binders such as Al2O3, SiO2, MgO, once added into the catalyst, may cause formation of inorganic salts between FeO and Binders leading to a decrease of Fe reduction and a loss of olefin selectivity for CO hydrogenation. Especially, For K-Fe-MnO/Si-2 catalyst with Al2O3 binder directly, the strong secondary reactions of ethylene during CO hydrogenation cause a very poor light olefin selectivity, which will be improved greatly by modifying Al2O3.     

Supported molecular iridium catalysts: resolving effects of metal nuclearity and supports as ligands

The performance of a supported catalyst is influenced by the size and structure of the metal species, the ligands bonded to the metal, and the support. Resolution of these effects has been lacking because of the lack of investigations of catalysts with uniform and systematically varied catalytic sites. We now demonstrate that the performance for ethene hydrogenation of isostructural iridium species on supports with contrasting properties as ligands (electron-donating MgO and electron-withdrawing HY zeolite) can be elucidated on the basis of molecular concepts. Spectra of the working catalysts show that the catalytic reaction rate is determined by the dissociation of H(2) when the iridium, either as mono- or tetra-nuclear species, is supported on MgO and is not when the support is the zeolite. The neighboring iridium sites in clusters are crucial for activation of both H(2) and C(2)H(4) when the support is MgO but not when it is the zeolite, because the electron-withdrawing properties of the zeolite support enable even single site-isolated Ir atoms to bond to both C(2)H(4) and H(2) and facilitate the catalysis.     

A Zeolite‐Supported Molecular Ruthenium Complex with η6‐C6H6 Ligands: Chemistry Elucidated by Using Spectroscopy and Density Functional Theory

An essentially molecular ruthenium–benzene complex anchored at the aluminum sites of dealuminated zeolite Y was formed by treating a zeolite‐supported mononuclear ruthenium complex, [Ru(acac)(η²‐C₂H₄)₂]⁺ (acac=acetylacetonate, C₅H₇O₂^?), with ¹³C₆H₆ at 413 K. IR, ¹³C NMR, and extended X‐ray absorption fine structure (EXAFS) spectra of the sample reveal the replacement of two ethene ligands and one acac ligand in the original complex with one ¹³C₆H₆ ligand and the formation of adsorbed protonated acac (Hacac). The EXAFS results indicate that the supported [Ru(η⁶‐C₆H₆)]²⁺ incorporates an oxygen atom of the support to balance the charge, being bonded to the zeolite through three Ru? O bonds. The supported ruthenium–benzene complex is analogous to complexes with polyoxometalate ligands, consistent with the high structural uniformity of the zeolite‐supported species, which led to good agreement between the spectra and calculations at the density functional theory level. The calculations show that the interaction of the zeolite with the Hacac formed on treatment of the original complex with ¹³C₆H₆ drives the reaction to form the ruthenium–benzene complex.     

Nearly uniform MgO-supported pentaosmium cluster catalysts

[Os5C(CO)14]2- was synthesized on the surface of MgO by reductive carbonylation of adsorbed Os3(CO)12 at 548 K and 1 bar. The supported species were characterized by infrared (IR), 13C NMR, and extended X-ray absorption fine structure (EXAFS) spectroscopies. The IR and EXAFS data are consistent with the presence of [Os5C(CO)14]2-, formed in a yield of about 65%, along with smaller osmium carbonyl clusters. As the supported clusters were decarbonylated in flowing He or H2, they were characterized by IR and EXAFS spectroscopies, which indicate that the decarbonylation was complete after each treatment at 573 K. The EXAFS data characterizing the sample treated in He determine an Os-Os first-shell coordination number of 3.4, matching that of [Os5C(CO)14]2- and indicating that the Os5C frame was retained after decarbonylation in He. Treatment of MgO-supported [Os5C(CO)14]2- in H2 at 573 K resulted in the formation of aggregated osmium clusters larger than Os5C. The catalytic activity of Os5C for toluene hydrogenation was found to be an order of magnitude less than that of the aggregated osmium clusters, which are metallic in character.     

Structural study on 2,2'-(methylimino)bis(N,N-dioctylacetamide) complex with Re(VII)O4- and Tc(VII)O4- by 1H NMR, EXAFS, and IR spectroscopy

The structures of the complex of 2,2'-(methylimino)bis(N,N-dioctylacetamide) (MIDOA) with M(VII)O(4)(-) (M = Re and Tc), which were prepared by liquid-liquid solvent extraction, were investigated by using (1)H nuclear magnetic resonance (NMR), extended X-ray absorption fine structure (EXAFS), and infrared (IR) spectroscopy. The (1)H NMR spectra of the complex of MIDOA with Re(VII)O(4)(-) prepared in the organic solution suggest the transfer of a proton from aqueous to organic solution and the formation of the H(+)MIDOA ion. The EXAFS spectra of the complexes of H(+)MIDOA with Re(VII)O(4)(-) and Tc(VII)O(4)(-) show only the M-O coordination of the aquo complexes, suggesting that the chemical state of M(VII)O(4)(-) was unchanged during the extraction process. The results from (1)H NMR and EXAFS, therefore, provide evidence of M(VII)O(4)(-)···H(+)MIDOA complex formation in the organic solution. The IR spectra of Re(VII)O(4)(-)···H(+)MIDOA and Tc(VII)O(4)(-)···H(+)MIDOA were analyzed based on the structures and the IR spectra that were calculated at the B3LYP/cc-pVDZ level. Comparison of the observed and calculated IR spectra demonstrates that an intramolecular hydrogen bond is formed in H(+)MIDOA, and the M(VII)O(4)(-) ion interacts with H(+)MIDOA through multiple C-H(n)···O hydrogen bonds.     

Hydrogenation of arenes over silica-supported catalysts that combine a grafted rhodium complex and palladium nanoparticles: evidence for substrate activation on Rh(single-site)-Pd(metal) moieties

The complex Rh(cod)(sulfos) (Rh(I); sulfos = (-)O(3)S(C(6)H(4))CH(2)C(CH(2)PPh(2))(3); cod = cycloocta-1,5-diene), either free or supported on silica, does not catalyze the hydrogenation of benzene in either homogeneous or heterogeneous phase. However, when silica contains supported Pd metal nanoparticles (Pd(0)/SiO(2)), a hybrid catalyst (Rh(I)-Pd(0)/SiO(2)) is formed that hydrogenates benzene 4 times faster than does Pd(0)/SiO(2) alone. EXAFS and DRIFT measurements of in situ and ex situ prepared samples, batch catalytic reactions under different conditions, deuterium labeling experiments, and model organometallic studies, taken together, have shown that the rhodium single sites and the palladium nanoparticles cooperate with each other in promoting the hydrogenation of benzene through the formation of a unique entity throughout the catalytic cycle. Besides decreasing the extent of cyclohexa-1,3-diene disproportionation at palladium, the combined action of the two metals activates the arene so as to allow the rhodium sites to enter the catalytic cycle and speed up the overall hydrogenation process by rapidly reducing benzene to cyclohexa-1,3-diene.     

Restricted rotation of the olefin and amine ligands in cis-dichloro(p-toluidine)(ethyl vinyl ether)platinum(II)

cis-Dichloro(p-toluidine)(olefin)platinum(II) complexes, in which the olefin is either ethyl vinyl ether or ethylene, have been investigated by ¹H NMR spectroscopy over a range of temperatures (+50 to ?60° C) in order to study the rotation of the olefin ligand.The results give no evidence of rotation of the amine or vinyl ether ligands even at the highest temperature investigated, +50°C; only one of the two possible rotational isomers is present, and this is attributed to the presence of intramolecular hydrogen bonding between the oxygen atom of the vinyl ether and the -NH- group of the amine.In contrast, the amine and vinyl ligands in the ethylene complex rotate freely at room temperature, coalescence being observed above ?25° C for the ethylene protons.     

Dinuclear rhodium and iridium complexes with mixed amido/methoxo and amido/hydroxo bridges

The reactions of [[M(mu-OMe)(cod)](2)] (M = Rh, Ir; cod = 1,5- cyclooctadiene) with p-tolylamine, alpha-naphthylamine, and p-nitroaniline gave complexes with mixed-bridging ligands, [[M(cod)](2)(mu-NHAr)(mu-OMe)]. Similarly, the related complexes [[Rh(cod)](2)(mu-NHAr)(mu-OH)] were prepared from the reactions of [[Rh(mu-OH)(cod)](2)] with p-tolylamine, alpha-naphthylamine, and p-nitroaniline. The reactions of [[Rh(mu-OR)(cod)](2)] (R = H, Me) with o-nitroaniline gave the mononuclear complex [Rh(o-NO(2)C(6)H(4)NH)(cod)]. The syntheses of the amido complexes involve a proton exchange reaction from the amines to the methoxo or hydroxo ligands and the coordination of the amide ligand. These reactions were found to be reversible for the dinuclear complexes. The structure of [[Rh(cod)](2)(mu-NH[p-NO(2)C(6)H(4)])(mu-OMe)] shows two edge-shared square-planar rhodium centers folded at the edge with an anti configuration of the bridging ligands. The complex [[Rh(cod)](2)(mu-NH[alpha-naphthyl])(mu-OH)] cocrystallizes with [[Rh(mu-OH)(cod)](2)] and THF, forming a supramolecular aggregate supported by five hydrogen bridges in the solid state. In the mononuclear [Rh(o-NO(2)C(6)H(4)NH)(cod)] complex the o-nitroamido ligand chelates the rhodium center through the amido nitrogen and an oxygen of the nitro group.     

Novel hydridoirida-beta-diketones containing small molecules, CO, or ethylene: their behavior in coordinating solvents such as dimethylsulfoxide or acetonitrile

New hydridoirida-beta-diketones [IrH[(PPh2(o-C6H4CO))2H](CO)]ClO4 2 and [IrH[(PPh2(o-C6H4CO))2H](olefin)]BF4 (olefin = C2H4, 5; 1-hexene, 10) have been prepared. These complexes may afford new diacylhydridoiridium(III) derivatives. In chloroform solution, complex 2 is in equilibrium with the deprotonated diacylhydride trans-[IrH(PPh2(o-C6H4CO))2(CO)] complex 3. In DMSO, deprotonation of 2 occurs to yield the kinetically favored product 3, which isomerizes to the thermodynamically favored complex cis-[IrH(PPh2(o-C6H4CO))2(CO)] 4. Reprotonation of 4 with HBF4 in chlorinated solvents gives the cation in 2. In coordinating solvents such as dimethyl sulfoxide or acetonitrile, complex 5 undergoes displacement of ethylene to afford [IrH{(PPh2(o-C6H4CO))2H](L)]BF4 (L = DMSO, 7; CH3CN, 9). Complexes 5 and 7 undergo deprotonation by NEt3 to give the corresponding diacylhydrides. The ethylene complex gives only trans-[IrH(PPh2(o-C6H4CO))2(C2H4)] 6, while the dimethyl sulfoxide derivative affords a mixture of trans- and cis-[IrH(PPh2(o-C6H4CO))2(DMSO)] 8. Complex 10 shows inhibited alkene rotation around the Ir-olefin axis. All of the complexes were fully characterized spectroscopically. Single-crystal X-ray diffraction analysis was performed on complexes 3, 4, and 9. The 13C NMR and X-ray data point to a carbenoid character in the carbon atoms bonded to iridium in the irida--diketone fragment, so that it can be considered as an acyl(hydroxycarbene) moiety.     

Role of the Support in Catalysis: Activation of a Mononuclear Ruthenium Complex for Ethene Dimerization by Chemisorption on Dealuminated Zeolite Y

A set of supported ruthenium complexes with systematically varied ratios of chemisorbed to physisorbed species was formed by contacting cis‐[Ru(acac)₂(C₂H₄)₂] ( I ; acac=C₅H₇O₂^?) with dealuminated zeolite Y. Extended X‐ray absorption fine structure (EXAFS) spectra used to characterize the samples confirmed the systematic variation in the loadings of the two supported species and demonstrated that removal of bidentate acac ligands from I accompanied chemisorption to form [Ru(acac)(C₂H₄)₂]⁺ attached through two Ru? O bonds to the Al sites of the zeolite. A high degree of uniformity in the chemisorbed species was demonstrated by sharp bands in the infrared (IR) spectrum characteristic of ruthenium dicarbonyls that formed when CO reacted with the anchored complex. When the ruthenium loading exceeded 1.0 wt % (Ru/Al≈1:6), the additional adsorbed species were simply physisorbed. Ethene ligands on the chemisorbed species reacted to form butenes when the temperature was raised to approximately 393 K; acac ligands remained bonded to Ru. In contrast, ethene ligands on the physisorbed complex simply desorbed under the same conditions. The chemisorption activated the ruthenium complex and facilitated dimerization of the ethene, which occurred catalytically. IR and EXAFS spectra of the supported samples indicate that 1) Ru centers in the chemisorbed species are more electron deficient than those in the physisorbed species and 2) Ru–ethene bonds in the chemisorbed species are less symmetric than those in the physisorbed species, which implies the presence of a preferred configuration for the catalytic dimerization.     

EFFECTS OF BINDERS ON THE PRODUCTION OF LIGHT ALKENES FROM SYNGAS OVER K-Fe-MnO/SILICALITE-2 CATALYST Ⅰ. EFFECT OF VARIOUS BINDERS ON CO HYDROGENATION

Intr0ductionRcccntl}.n1uchprogrcsshasbcc11n1adcinthcscIcctivcCOh\'drogcnationproducingliglltolcfinsvIas}'ngasb}'dct'clopingasilicalitc-2zcolitcsupp0rtcdFccatal\'st.Ithasbccllshox\llthatasilicaIitc-2zcoIitcsupportcdFccatal\'stpromotcdb}'aIkalin1ctalandMnOdispla}sadcsirabIcolcfil1sclccti\'it}(asl1ighas7()%)andadcsirablcCOcont'crsion(muchhighcrthan7O%)\\ithabett.,rcactionlifconst,ca.I1~31.Ho\\cvcr-thcundcsirablcstrcl1gthofSi-2zcolitcisunsuitabIcforitsapplicatiOninindustry-\\hichsIlouldbci…     

Unravelling the reaction path of rhodium-MonoPhos-catalysed olefin hydrogenation

The mechanism of the asymmetric hydrogenation of methyl (Z)-2-acetamidocinnamate (mac) catalysed by [Rh(MonoPhos)(2)(nbd)]SbF(6) (MonoPhos: 3,5-dioxa-4-phosphacyclohepta[2,1-a:3,4-a']dinaphthalen-4-yl)dimethylamine) was elucidated by using (1)H, (31)P and (103)Rh NMR spectroscopy and ESI-MS. The use of nbd allows one to obtain in pure form the rhodium complex that contains two units of the ligand. In contrast to the analogous complexes that contain cis,cis-1,5-cyclooctadiene (cod), this complex shows well-resolved NMR spectroscopic signals. Hydrogenation of these catalyst precursors at 1 bar total pressure gave rise to the formation of a bimetallic complex of general formula [Rh(MonoPhos)(2)](2)(SbF(6))(2); no solvate complexes were detected. In the dimeric complex both rhodium atoms are ligated to two MonoPhos ligands but, in addition, each rhodium atom also binds to one of the binaphthyl rings of a ligand that is bound to the other rhodium metal. Upon addition of mac, a mixture of diastereomeric complexes [Rh(MonoPhos)(2)(mac)]SbF(6) is formed in which the substrate is bound in a chelate fashion to the metal. Upon hydrogenation, these adducts are converted into a new complex [Rh(MonoPhos)(2){mac(H)(2)}]SbF(6) in which the methyl phenylalaninate mac(H)(2) is bound through its aromatic ring to rhodium. Addition of mac to this complex leads to displacement of the product by the substrate. No hydride intermediates could be detected and no evidence was found for the involvement at any stage of the process of complexes with only one coordinated MonoPhos. The collected data suggest that the asymmetric hydrogenation follows a Halpern-like mechanism in which the less abundant substrate-catalyst adduct is preferentially hydrogenated to phenylalanine methyl ester.     

Preparation, structure, and ethylene polymerization behavior of half-sandwich picolyl-functionalized carborane iridium, ruthenium, and rhodium complexes

The synthesis of half-sandwich transition-metal complexes containing the Cab(N) and Cab(N,S) chelate ligands (HCab(N) = HC2B10H10CH2C5H4N (1), LiCab(N,S) = LiSC2B10H10CH2C5H4N (4)) is described. Compounds 1 and 4 were treated with chloride-bridged dimers [{Ir(Cp*)Cl2}2] (Cp* = eta5-C5Me5), [{Ru(p-cymene)Cl2}2] and [{Rh(Cp*)Cl2}2] to give half-sandwich complexes [Ir(Cp*)Cl(Cab(N))] (2), [Ru(p-cymene)Cl(Cab(N))] (3), and [Rh(Cp*)Cl(Cab(N,S))] (5), respectively. Addition reaction of LiCab(S) (Cab(S) = SC2(H)B10H10) to the rhodium complex 5 yields [Rh(Cp*)(Cab(S))(Cab(N,S))] (6). All the complexes were characterized by IR and NMR spectroscopy, and by elemental analysis. In addition, X-ray structure analyses were performed on complexes 2, 3, 5, and 6, in which the potential C,N- and N,S-chelate ligands were found to coordinate in a bidentate mode. The carborane complex 2 shows catalytic activities up to 3.7x10(5) g PE mol(-1) Ir h(-1) for the polymerization of ethylene in the presence of methylaluminoxane (MAO) as cocatalyst. The polymer obtained from this homogeneous catalytic reaction has a spherical morphology. Catalytic activities and the molecular weight of polyethylene have been investigated for various reaction conditions.