Capture of Gaseous Iodine in Isoreticular Zirconium-Based UiO-n Metal-Organic Frameworks: Influence of Amino Functionalization,DFT Calculations,Raman and EPR Spectroscopic Investigation

A series of Zr-based UiO-n MOF materials (n=66, 67, 68) have been studied for iodine capture. Gaseous iodine adsorption was collected kinetically from a home-made set-up allowing the continuous measurement of iodine content trapped within UiO-n compounds, with organic functionalities (−H, −CH₃, −Cl, −Br, −(OH)₂, −NO₂, −NH₂, (−NH₂)₂, −CH₂ NH₂) by in-situ UV-Vis spectroscopy. This study emphasizes the role of the amino groups attached to the aromatic rings of the ligands connecting the {Zr₆O₄(OH)₄} brick. In particular, the preferential interaction of iodine with lone-pair groups, such as amino functions, has been experimentally observed and is also based on DFT calculations. Indeed, higher iodine contents were systematically measured for amino-functionalized UiO-66 or UiO-67, compared to the pristine material (up to 1211 mg/g for UiO-67-(NH₂)₂). However, DFT calculations revealed the highest computed interaction energies for alkylamine groups (−CH₂NH₂) in UiO-67 (−128.5 kJ/mol for the octahedral cavity), and pointed out the influence of this specific functionality compared with that of an aromatic amine. The encapsulation of iodine within the pore system of UiO-n materials and their amino-derivatives has been analyzed by UV-Vis and Raman spectroscopy. We showed that a systematic conversion of molecular iodine (I₂) species into anionic I⁻ ones, stabilized as I⁻⋅⋅⋅I₂ or I₃⁻ complexes within the MOF cavities, occurs when I₂@UiO-n samples are left in ambient light.     

Modulating Hierarchical Micro/Mesoporosity by a Mixed Solvent Approach in Al-MOF: Stabilization of MAPbBr3 Quantum Dots

Various hierarchical micro/mesoporous MOFs based on {[Al(μ-OH)(1,4-NDC)]⋅H₂O} ( MOF1 ) with tunable porosities (pore volume and surface area) have been synthesized by assembling Al^III and 1,4-NDC (1,4-naphthalenedicarboxylate) under microwave irradiation by varying water/ethanol solvent ratio. Water/ethanol mixture has played a crucial role in the mesopore generation in MOF1M₂₅ , MOF1M₅₀ , and MOF1M₇₅ , which is achieved by in situ formation of water/ethanol clusters. By adjusting the ratio of water/ethanol, the particle size, surface area and micro/mesopore volume fraction of the MOFs are controlled. Furthermore, reaction time plays a critical role in mesopore formation as realized by varying reaction time for the MOF with 50 % ethanol ( MOF1M₅₀ ). Additionally, hierarchical MOF ( MOF1M₅₀ ) has been used as a template for the stabilization of MAPbBr₃ (MA=methylammonium) perovskite quantum dots (PQDs). MAPbBr₃ PQDs are grown inside MOF1M₅₀ , where mesopores control the size of PQDs which leads to quantum confinement.     

Host–Guest [2+2] Cycloaddition Reaction: Postsynthetic Modulation of CO2 Selectivity and Magnetic Properties in a Bimodal Metal–Organic Framework

Simultaneous tuning of permanent porosity and modulation of magnetic properties by postsynthetic modification (PSM) with light in a metal–organic framework is unprecedented. With the aim of achieving such a photoresponsive porous magnetic material, a 3D photoresponsive biporous framework, MOF1, which has 2D channels occupied by the guest 1,2‐bis(4‐pyridyl)ethylene (bpee), H₂O, and EtOH molecules, has been synthesized. The guest bpee in 1 is aligned parallel to pillared bpee with a distance of 3.9 Å between the ethylenic groups; this allows photoinduced PSM of the pore surface through a [2+2] cycloaddition reaction to yield MOF2. Such photoinduced PSM of the framework structure introduces enhanced CO₂ selectivity over that of N₂. The higher selectivity in MOF2 than that of MOF1 is studied through theoretical calculations. Moreover, MOF2 unveils reversible changes in T_c with response to dehydration–rehydration. This result demonstrates that photoinduced PSM is a powerful tool for fabricating novel functional materials.     

Facile Synthetic Access to Rhenium(II) Complexes: Activation of Carbon–Bromine Bonds by Single‐Electron Transfer

The five‐coordinated Re^I hydride complexes [Re(Br)(H)(NO)(PR₃)₂] (R=Cy 1 a , iPr 1 b ) were reacted with benzylbromide, thereby affording the 17‐electron mononuclear Re^II hydride complexes [Re(Br)₂(H)(NO)(PR₃)₂] (R=Cy 3 a , iPr 3 b ), which were characterized by EPR, cyclic voltammetry, and magnetic susceptibility measurements. In the case of dibromomethane or bromoform, the reaction of 1 afforded Re^II hydrides 3 in addition to Re^I carbene hydrides [Re(?CHR¹)(Br)(H)(NO)(PR₃)₂] (R¹=H 4 , Br 5 ; R=Cy a , iPr b ) in which the hydride ligand is positioned cis to the carbene ligand. For comparison, the dihydrogen Re^I dibromide complexes [Re(Br)₂(NO)(PR₃)₂(η²‐H₂)] (R=Cy 2 a , iPr 2 b ) were reacted with allyl‐ or benzylbromide, thereby affording the monophosphine Re^II complex salts [R₃PCH₂R′][Re(Br)₄(NO)(PR₃)] (R′=? CH?CH₂ 6 , Ph 7 ). The reduction of Re^II complexes has also been examined. Complex 3 a or 3 b can be reduced by zinc to afford 1 a or 1 b in high yield. Under catalytic conditions, this reaction enables homocoupling of benzylbromide (turnover frequency (TOF): 3 a 150, 3 b 134 h^?1) or allylbromide (TOF: 3 a 575, 3 b 562 h^?1). The reaction of 6 a and 6 b with zinc in acetonitrile affords in good yields the monophosphine Re^I complexes [Re(Br)₂(NO)(MeCN)₂(PR₃)] (R=Cy 8 a , iPr 8 b ), which showed high catalytic activity toward highly selective dehydrogenative silylation of styrenes (maximum TOF of 61 h^?1). Single‐electron transfer (SET) mechanisms were proposed for all these transformations. The molecular structures of 3 a , 6 a , 6 b , 7 a , 7 b , and 8 a were established by single‐crystal X‐ray diffraction studies.     

Widely Controllable Syngas Production by a Dye‐Sensitized TiO2 Hybrid System with ReI and CoIII Catalysts under Visible‐Light Irradiation

Visible‐light irradiation of a ternary hybrid catalyst prepared by grafting a dye, an H₂ evolving Co^III catalyst and a CO‐producing Re^I catalyst on TiO₂ have been found to produce both H₂ and CO (syngas) in CO₂‐saturated N ,N ‐dimethyl formamide (DMF)/water solution containing a 0.1 m sacrificial electron donor. The H₂/CO ratios are effectively controlled by changing either the water content of the solvent or the molar ratio of the Re^I and Co^III catalysts ranging from 1:2 to 15:1. The controlled syngas formation is discussed in terms of competitive electron flow from TiO₂ to each of the CO₂‐reduction and hydrogen‐evolving sites depending on the efficiencies of the two catalytic reaction cycles under given reaction conditions.     

Electrochemical Synthesis of a Microporous Conductive Polymer Based on a Metal–Organic Framework Thin Film

A new approach to preparing 3D microporous conductive polymer has been demonstrated in the electrochemical synthesis of a porous polyaniline network with the utilization of a MOF thin film supported on a conducting substrate. The prepared porous polyaniline with well‐defined uniform micropores of 0.84 nm exhibits a high BET surface area of 986 m² g^?1 and a high electric conductivity of 0.125 S cm^?1 when doped with I₂, which is superior to existing porous conducting materials of porous MOFs, CMPs, and COFs.     

Hierarchically Porous Carbons Derived from Metal–Organic Framework/Chitosan Composites for High‐Performance Supercapacitors

Hierarchically porous carbon materials with high surface areas are promising candidates for energy storage and conversion. Herein, the facile synthesis of hierarchically porous carbons through the calcination of metal–organic framework (MOF)/chitosan composites is reported. The effects of the chitosan (CS) additive on the pore structure of the resultant carbons are discussed. The corresponding MOF/chitosan precursors could be readily converted into hierarchically porous carbons (NPC‐V, V=1, 2, 4, and 6) with much higher ratios of meso‐/macropore volume to micropore volume (V_meso‐macro/V_micro). The derived carbon NPC‐2 with the high ratio of V_meso‐macro/V_micro=1.47 demonstrates a high specific surface area of 2375 m² g^?1, and a high pore volume of 2.49 cm³ g^?1, as well as a high graphitization degree, in comparison to its counterpart (NPC) without chitosan addition. These excellent features are favorable for rapid ion diffusion/transport, endowing NPC‐2 with enhanced electrochemical behavior as supercapacitor electrodes in a symmetric electrode system, corresponding to a high specific capacitance of 199.9 F g^?1 in the aqueous electrolyte and good rate capability. Good cycling stability is also observed after 10 000 cycles.     

Tuning CO2 Uptake and Reversible Iodine Adsorption in Two Isoreticular MOFs through Ligand Functionalization

The synthesis and characterization of two isoreticular metal–organic frameworks (MOFs), {[Cd(bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 1 ) and {[Cd(2‐NH₂bdc)(4‐bpmh)]}_n?2 n(H₂O) ( 2 ) [bdc=benzene dicarboxylic acid; 2‐NH₂bdc=2‐amino benzene dicarboxylic acid; 4‐bpmh=N,N‐bis‐pyridin‐4‐ylmethylene‐hydrazine], are reported. Both compounds possess similar two‐fold interpenetrated 3D frameworks bridged by dicarboxylates and a 4‐bpmh linker. The 2D Cd‐dicarboxylate layers are extended along the a‐axis to form distorted square grids which are further pillared by 4‐bpmh linkers to result in a 3D pillared‐bilayer interpenetrated framework. Gas adsorption studies demonstrate that the amino‐functionalized MOF 2 shows high selectivity for CO₂ (8.4 wt % 273 K and 7.0 wt % 298 K) over CH₄, and the uptake amounts are almost double that of non‐functional MOF 1 . Iodine (I₂) adsorption studies reveal that amino‐functionalized MOF 2 exhibits a faster I₂ adsorption rate and controlled delivery of I₂ over the non‐functionalized homolog 1 .     

Shielding of Electron Acceptors Coordinated to Rhenium(I) by Carboxylato Groups. Intraligand and Charge‐Transfer Excited‐State Properties of fac‐(‘Anthraquinone‐2‐carboxylato')(2,2′‐bipyridine)tricarbonylrhenium (fac‐[ReI(aq‐2‐CO2)(2,2′‐bipy)(CO)3])

The photophysical and photochemical properties of (OC‐6‐33)‐(2,2′‐bipyridine‐κN¹,κN¹′)tricarbonyl(9,10‐dihydro‐9,10‐dioxoanthracene‐2‐carboxylato‐κO)rhenium (fac‐[Re^I(aq‐2‐CO₂)(2,2′‐bipy)(CO)₃]) were investigated and compared to those of the free ligand 9,10‐dihydro‐9,10‐dioxoanthracene‐2‐carboxylate (=anthraquinone‐2‐carboxylate) and other carboxylato complexes containing the (2,2′‐bipyridine)tricarbonylrhenium ([Re(2,2′‐bipy)(CO)₃]) moiety. Flash and steady‐state irradiations of the anthraquinone‐derived ligand (λ_exc 337 or 351 nm) and of its complex reveal that the photophysics of the latter is dominated by processes initiated in the Re‐to‐(2,2′‐bipyridine) charge‐transfer excited state and 2,2′‐bipyridine‐ and (anthraquinone‐2‐carboxylato)‐centered intraligand excited states. In the reductive quenching by N,N‐diethylethanamine (TEA) or 2,2′,2″‐nitrilotris[ethanol] TEOA, the reactive states are the 2,2′‐bipyridine‐centered and/or the charge‐transfer excited states. The species with a reduced anthraquinone moiety is formed by the following intramolecular electron transfer, after the redox quenching of the excited state: [Re^I(aq−2−CO₂)(2,2′‐bipy^.)(CO)₃]⁻⇌[Re^I(aq−2−CO₂^.)(2,2′‐bipy)(CO)₃]⁻ The photophysics, particularly the absence of a Re^I‐to‐anthraquinone charge‐transfer excited state photochemistry, is discussed in terms of the electrochemical and photochemical results.     

Size Selectivity of a Copper Metal–Organic Framework and Origin of Catalytic Activity in Epoxide Alcoholysis

{Cu(bpy)(H₂O)₂(BF₄)₂(bpy)} (Cu‐MOF; MOF=metal–organic framework; bpy=4,4′‐bipyridine), with a 3D‐interpenetrated structure and saturated Cu coordination sites in the framework, possesses unexpectedly high activity in the ring‐opening reaction of epoxides with MeOH, although the reaction rate drops remarkably with more bulky alcohols. This (apparent) size selection and the single Cu²⁺ sites in an identical environment of the crystalline matrix resemble zeolites. The real nature of active sites was investigated by attenuated total reflection infrared (ATR‐IR), Raman, EPR, and UV/Vis spectroscopies. Cu‐MOF has highly dynamic structural properties that respond to MeOH; its framework dimensions change from 3D to 2D by restructuring to a symmetric coordination of four bpy units to Cu. This interaction is accompanied by the partial dissolution of Cu‐MOF as multi‐Cu clusters, in which Cu²⁺ ions are connected with bpy ligands. Although both molecular and surface catalysis contribute to the high rate of alcoholysis, the soluble oligomeric species (Cu_mbpy_n) are far more active. Finally, addition of diethyl ether to the reaction mixture induces the reconstruction of dissolved and solid Cu‐MOF to the original framework structure, thereby allowing excellent recyclability of Cu‐MOF as an apparent heterogeneous catalyst. In contrast, the original Cu‐MOF structure is maintained upon contact with larger alcohols, such as iPrOH and tBuOH, thus leading to poor activity in epoxide ring opening.     

Unprecedented Second‐Timescale Blue/Green Emissions and Iodine‐Uptake‐Induced Single‐Crystal‐to‐Single‐Crystal Transformation in ZnII/CdII Metal–Organic Frameworks

The long‐persistent phosphorescent metal–organic framework (MOF) is a kind of highly desirable but rare material. Here, two new molecular MOF materials, {[Zn(tipa)Cl] ? NO₃ ? 2 DMF}_n ( 1 ) and {[Cd₂(tipa)₂Cl₄] ? 6 DMF}_n ( 2 ) (tipa=tri(4‐imidazolylphenyl)amine), which have 3D twofold interpenetrated ( utp ) and 2D noninterpenetrated ( kgd ) topologies, respectively, are reported. They exhibit unexpected long‐persistent emissions yet reported: At 77 K, they persist in glowing after stopping the UV irradiation on a timescale up to seconds at 77 K, which can be detected by the naked eye (ca. 2 s). Compounds 1 and 2 also undergo single‐crystal‐to‐single‐crystal (SC‐SC) transformations through different routes; a simple anion‐exchange route for 1 and a complicated replacement of μ₁‐Cl^? ions by DMF molecules accompanying I₃^? captured in the void for 2 .     

Ligand and Metal Effects on the Stability and Adsorption Properties of an Isoreticular Series of MOFs Based on T‐Shaped Ligands and Paddle‐Wheel Secondary Building Units

The synthesis of stable porous materials with appropriate pore size and shape for desired applications remains challenging. In this work a combined experimental/computational approach has been undertaken to tune the stability under various conditions and the adsorption behavior of a series of MOFs by subtle control of both the nature of the metal center (Co²⁺, Cu²⁺, and Zn²⁺) and the pore surface by the functionalization of the organic linkers with amido and N‐oxide groups. In this context, six isoreticular MOFs based on T‐shaped ligands and paddle‐wheel units with ScD_0.33 topology have been synthesized. Their stabilities have been systematically investigated along with their ability to adsorb a wide range of gases (N₂, CO₂, CH₄, CO, H_2, light hydrocarbons (C₁–C₄)) and vapors (alcohols and water). This study has revealed that the MOF frameworks based on Cu²⁺ are more stable than their Co²⁺ and Zn²⁺ analogues, and that the N‐oxide ligand endows the MOFs with a higher affinity for CO₂ leading to excellent selectivity for this gas over other species.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Efficient Trapping of Trace Acetylene from Ethylene in an Ultramicroporous Metal–Organic Framework: Synergistic Effect of High-Density Open Metal and Electronegative Sites

Acetylene (C₂H₂) removal from ethylene (C₂H₄) is a crucial step in the production of polymer-grade C₂H₄ but remains a daunting challenge because of the similar physicochemical properties of C₂H₂ and C₂H₄. Currently energy-intensive cryogenic distillation processes are used to separate the two gases industrially. A robust ultramicroporous metal–organic framework (MOF), Ni₃(pzdc)₂(7 Hade)₂, is reported for efficient C₂H₂/C₂H₄ separation. The MOF comprises hydrogen-bonded linked one-dimensional (1D) chains, and features high-density open metal sites (2.7 nm⁻³) and electronegative oxygen and nitrogen sites arranged on the pore surface as cooperative binding sites. Theoretical calculations, in situ powder X-ray diffraction and Fourier-transform infrared spectroscopy revealed a synergistic adsorption mechanism. The MOF possesses S-shaped 1D pore channels that efficiently trap trace C₂H₂ at 0.01 bar with a high C₂H₂ uptake of 60.6 cm³ cm⁻³ and C₂H₂/C₂H₄ selectivity.     

Construction of 0D to 3D Copper(II) MOFs based on heterocyclic carboxylic acid: Synthesis,structures, cyclic voltammograms,and luminescent properties

The crystal structures of MOFs [Cu(PDA)(Phen)(H₂O)]₂ · 5H₂O (I) and [Cu(PZCA)₂(H₂O)₂] · 2H₂O (II) (H₂PDA = pyridine-2,6-dicarboxylic acid, Phen = 1,10-phenanthroline, HPZCA = pyrazine-2-carboxylic acid, H₂PZDA = pyrazine-2,3-carboxylic acid) have been prepared under hydrothermal conditions. These MOFs have been characterized by element analysis, single-crystal X-ray diffraction, thermogravimetric analyses and IR spectroscopy. 3D frameworks of MOFs I and II are fabricated from zero-dimensional (0D) motifs through hydrogen bonds and π-π interactions. In MOF II, the PZCA ligand comes from in situ decarboxylation of the part of pyrazine-2,3-dicarboxylic acid (H₂PZDA). Luminescent emissions bands of MOF I in methanol have been measured at room temperature and it displays selectivity to Zn²⁺, Cu²⁺, Pb²⁺, and Cd²⁺ ions. Cyclic voltammetry of MOFs I and II showed that the Cu(II/I) couple is irreversible.     

NEW DINUCLEAR ASYMMETRIC COMPLEXES OF RUTHENIUM AND RHENIUM

Abstract

New dinuclear asymmetric complexes of ruthenium and rhenium, of formula [(bpy)(CO)₃ Re^I(4,4′-bpy)Ru^II/III(NH₃)₅]^3+/4+ have been prepared and characterized by spectroscopic and electrochemical techniques. In the mixed-valent species [Re^I, Ru^III], the back electron transfer reaction Ru^II → Re^II, that occurs after light excitation, is predicted to be in the Marcus inverted region. This fact is consistent with the observed quenching of the luminiscence of the Re chromophore in [(bpy)(CO)₃Re^I(4,4′-bpy)Ru^III(NH₃)₅]⁴⁺, when compared to the parent complex [(bpy)(CO)₃Re^I(4,4′-bpy)]⁺. A theoretical treatment due to Creutz, Newton and Sutin has been successfully applied to predict the electronic coupling element in the mixed-valent complex.     

Coordination-Induced N−H Bond Splitting of Ammonia and Primary Amine of CuI−MOFs

We report a porous three-dimensional anionic tetrazolium based Cu^I−MOF 1 , which is capable of cleaving the N−H bond of ammonia and primary amine, as well as the O−H bond of H₂O along with spontaneous H₂ evolution. In the gas-solid phase reaction of 1 with ammonia and water vapor, Cu^I−MOF 1 was gradually oxidized to NH₂−Cu^II−MOF and OH−Cu^II−MOF, through single-crystal-to-single-crystal (SCSC) structural transformations, which was confirmed by XPS, PXRD and X-ray single-crystal diffraction. Density functional theory (DFT) demonstrated that Cu^I−MOF could lower N−H bond dissociation free energy of ammonia through coordination-induced bond weakening and promote H₂ evolution by the reduction potential of 1 . To our knowledge, this is the first example of MOFs that activate ammonia and amine in gas-solid manner.     

Controlling the BET Surface Area of Porous Carbon by Using the Cd/C Ratio of a Cd–MOF Precursor and Enhancing the Capacitance by Activation with KOH

Herein, four new cadmium metal–organic frameworks (Cd–MOFs), [Cd(bib)(bdc)]_∞ ( 1 ), [Cd(bbib)(bdc)(H₂O)]_∞ ( 2 ), [Cd(bibp)(bdc)]_∞ ( 3 ), and [Cd₂(bbibp)₂(bdc)₂(H₂O)]_∞ ( 4 ), have been constructed from the reaction of Cd(NO₃)₂ ? 4 H₂O with 1,4‐benzenedicarboxylate (H₂bdc) and structure‐related bis(imidazole) ligands (1,4‐bis(imidazol‐1‐yl)benzene (bib), 1,4‐bis(benzoimidazol‐1‐yl)benzene (bbib), 4,4′‐bis(imidazol‐1‐yl)biphenyl (bibp), and 4,4′‐bis(benzoimidazol‐1‐yl)biphenyl (bbibp)) under solvothermal conditions. Cd–MOF 1 shows a 2D (4,4) lattice with parallel interpenetration, whereas 2 displays an interesting 3D interpenetrating dia network, 3 exhibits an unusual 3D interpenetrating dmp network, and 4 presents a 3D self‐catenated pillar‐layered framework with a Schäfli symbol of [4³ ? 6³]₂ ? [4⁶ ? 6¹⁶ ? 8⁶]. The structural diversity indicates that the backbone of the bis(imidazole) ligand (including the terminal group and spacer) plays a crucial role in the assembly of mixed‐ligand frameworks. By using the pore‐forming effect of cadmium vapor, for the first time we have utilized these Cd–MOFs as precursors to further prepare porous carbon materials (PCs) in a calcination–thermolysis procedure. These PCs show different porous features that correspond to the topological structures of Cd–MOFs. Significantly, it was found that the specific surface area and capacitance of PCs are tuned by the Cd/C ratio of the MOF. Furthermore, the as‐synthesized PCs were processed with KOH to obtain activated porous carbon materials (APCs) with higher specific surface area and porosity, which greatly promoted the energy‐storage capacity. After full characterization, we found that APC‐bib displays the largest specific surface area (1290 m² g^?1) and total pore volume (1.37 cm³ g^?1) of this series of carbon materials. Consequently, APC‐bib demonstrates the highest specific capacitance of 164 F g^?1 at a current density of 0.5 A g^?1, and also excellent retention of capacitance (≈89.4 % after 5000 cycles at 1 A g^?1). Therefore, APC‐bib has great potential as the electrode material in a supercapacitor.     

On the mechanism of the photoinduced reduction of an adduct of ferricytochrome C with a poly(4-vinylpyridine) polymer containing –Re (CO)3(3,4,7,8-tetramethyl-1,10-phenanthroline) pendants

Changes in the UV–vis absorption spectrum revealed the formation of adducts between the Re^I polymer and ferricytochrome C, Fe^III-Cyt c. Different morphologies for the Re^I polymer and the adducts formed between the Re^I polymer and Fe^III-Cyt c were observed by TEM. The reduction of the Re^I chromophores in the polymer, achieved by the reductive quenching of the MLCT excited state of the Re^I polymer by triethylamine (TEA) and/or by the reaction between e⁻_solv and {[(vpy)₂vpyRe^I(CO)₃(tmphen)⁺]}_n200 in pulse radiolysis experiments, produces –Re^I(CO)₃(tmphen) and –Re^I(CO)₃(tmphenH)⁺ as the main species. The reductive quenching of the MLCT of the Re^I polymer by TEA was followed by a rapid electron transfer from the –Re^I(CO)₃(tmphen) to the Fe^III center in the heme to produce ferrocytochrome C, Fe^II-Cyt c.     

Ligand exchange and complex formation kinetics studied by NMR exemplified on fac-[(CO)3M(H2O)] (M = Mn, Tc, Re)

In this review ligand exchange and complex formation reactions on fac-[(CO)₃M(H₂O)₃]⁺ (M = Mn, Tc, Re) and on fac-[(CO)₂(NO)Re(H₂O)₃]²⁺ are presented. A variety of experimental NMR techniques are described and it is shown that sometimes combinations of techniques applied at variable temperature or variable pressure allowed to measure exchange rate constants and their activation parameters as well as thermodynamic parameters. Furthermore, the use of uncommon nuclei for NMR like ¹⁷O or ⁹⁹Tc extends considerably the range of applications especially in aqueous solutions when ¹H NMR is often not very useful.Tricarbonyl triaqua complexes of technetium(I) and rhenium(I) became important precursors for a variety of radiopharmaceuticals under development. It has been shown that the fac-[(CO)₃M]-unit is kinetically inert and that water molecules bound to it can be easily replaced. Reactivity of the Re^I complexes is one to two orders of magnitude slower than its Tc^I analogues. Furthermore, it shows a marked acidity dependence which has not been observed for Tc^I and Mn^I species.