Targeted Management of Perovskite Film by Co(II) Sulfophenyl Porphyrin for Efficient and Stable Solar Cells†

In the lead halide perovskite solar cells (PSCs), the redox reaction of I^– and Pb²⁺ ions in perovskite materials under the fabrication and operation processes causes the formation of defects to destroy the cell efficiency and long-term stability. Herein, we have employed a Co(II) sulfophenyl porphyrin (CoTPPS) to modify the perovskite film. The sulfonic group could coordinate with Pb²⁺ to efficiently passivate the uncoordinated Pb²⁺. Additionally, Co²⁺ ions in CoTPPS could react with I₂ generated under the thermal and light stress to yield the Co³⁺ and I^–, thus achieving the regeneration of I^– in perovskite film. Therefore, the CoTPPS could realize the targeted management of the imperfections in perovskite film. As a result, the modified PSCs reveal the remarkably enhanced cell performance. More importantly, the CoTPPS modified device retains 75% of its initial efficiency value storing at 85°C for 2000 h and about 70% of its efficiency when being continuously illuminated at a simulated sunlight for 1200 h. This strategy tackles the chemical reaction and inhibits the defect generation, thus improving the operational stability and efficiency of PSCs.      

Inhibiting Ion Migration Through Chemical Polymerization and Chemical Chelation Toward Stable Perovskite Solar Cells

The migration of ions is known to be associated with various detrimental phenomena, including current density-voltage hysteresis, phase segregation, etc., which significantly limit the stability and performance of perovskite solar cells, impeding their progress toward commercial applications. To address these challenges, we propose incorporating a polymerizable organic small molecule monomer, N-carbamoyl-2-propan-2-ylpent-4-enamide (Apronal), into the perovskite film to form a crosslinked polymer (P-Apronal) through thermal crosslinking. The carbonyl and amino groups in Apronal effectively interact with shallow defects, such as uncoordinated Pb²⁺ and iodide vacancies, leading to the formation of high-quality films with enhanced crystallinity and reduced lattice strain. Furthermore, the introduction of P-Apronal improves energy level alignment, and facilitates charge carrier extraction and transport, resulting in a champion efficiency of 25.09 %. Importantly, P-Apronal can effectively suppress the migration of I⁻ ions and improve the long-term stability of the devices. The present strategy sets forth a path to attain long-term stability and enhanced efficiency in perovskite solar cells.     

Perovskite Films Regulation via Hydrogen-Bonded Polymer Network for Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) are considered as a promising photovoltaic technology due to their high efficiency and low cost. However, their long-term stability, mechanical durability, and environmental risks are still unable to meet practical needs. To overcome these issues, we designed a multifunctional elastomer with abundant hydrogen bonds and carbonyl groups. The chemical bonding between polymer and perovskite could increase the growth activation energy of perovskite film and promote the preferential growth of high-quality perovskite film. Owing to the low defect density and gradient energy-level alignment, the corresponding device exhibited a champion efficiency of 23.10 %. Furthermore, due to the formation of the hydrogen-bonded polymer network in the perovskite film, the target devices demonstrated excellent air stability and enhanced flexibility for the flexible PSCs. More importantly, the polymer network could coordinate with Pb²⁺ ions, immobilizing lead atoms to reduce their release into the environment. This strategy paves the way for the industrialization of high-performance flexible PSCs.     

Lead‐Free Silver‐Bismuth Halide Double Perovskite Nanocrystals

Lead‐free perovskite nanocrystals (NCs) were obtained mainly by substituting a Pb²⁺ cation with a divalent cation or substituting three Pb²⁺ cations with two trivalent cations. The substitution of two Pb²⁺ cations with one monovalent Ag⁺ and one trivalent Bi³⁺ cations was used to synthesize Cs₂AgBiX₆ (X=Cl, Br, I) double perovskite NCs. Using femtosecond transient absorption spectroscopy, the charge carrier relaxation mechanism was elucidated in the double perovskite NCs. The Cs₂AgBiBr₆ NCs exhibit ultrafast hot‐carrier cooling (<1 ps), which competes with the carrier trapping processes (mainly originate from the surface defects). Notably, the photoluminescence can be increased by 100 times with surfactant (oleic acid) added to passivate the defects in Cs₂AgBiCl₆ NCs. These results suggest that the double perovskite NCs could be potential materials for optoelectronic applications by better controlling the surface defects.     

Supramolecular Coordination of Pb2+ Defects in Hybrid Lead Halide Perovskite Films Using Truxene Derivatives as Lewis Base Interlayers

Truxene derivatives, due to their molecular structure and properties, are good candidates for the passivation of defects when deposited onto hybrid lead halide perovskite thin films. Moreover, their semiconductor characteristics can be tailored through the modification of their chemical structure, which allows-upon light irradiation- the interfacial charge transfer between the perovskite film and the truxene molecules. In this work, we analysed the use of the molecules as surface passivation agents and their use in complete functional solar cells. We observed that these molecules reduce the non-radiative carrier recombination dynamics in the perovskite thin film through the supramolecular complex formation between the Truxene molecule and the Pb²⁺ defects at the perovskite surface. Interestingly, this supramolecular complexation neither affect the carrier recombination kinetics nor the carriers collection but induced noticeable hysteresis on the photocurrent vs voltage curves of the solar cells under 1 sun illumination.     

A Multifunctional Polymer as an Interfacial Layer for Efficient and Stable Perovskite Solar Cells

Metal-cation defects and halogen-anion defects in perovskite films are critical to the efficiency and stability of perovskite solar cells (PSCs). In this work, a random polymer, poly(methyl methacrylate-co-acrylamide) (PMMA-AM), was synthesized to serve as an interfacial passivation layer for synergistically passivating the under-coordinated Pb²⁺ and anchor the I^- of the [PbI₆]⁴⁻ octahedron. Additionally, the interfacial PMMA-AM passivation layer cannot be destroyed during the hole transport layer deposition because of its low solubility in chlorobenzene. This passivation leads to an enhancement in the open-circuit voltage from 1.12 to 1.22 V and improved stability in solar cell devices, with the device maintaining 95 % of the initial power conversion efficiency (PCE) over 1000 h of maximum power point tracking. Additionally, a large-area solar cell module was fabricated using this approach, achieving a PCE of 20.64 %.     

Defect mitigation using d-penicillamine for efficient methylammonium-free perovskite solar cells with high operational stability

Trap-dominated non-radiative charge recombination is one of the key factors that limit the performance of perovskite solar cells (PSCs), which was widely studied in methylammonium (MA) containing PSCs. However, there is a need to elucidate the defect chemistry of thermally stable, MA-free, cesium/formamidinium (Cs/FA)-based perovskites. Herein, we show that d-penicillamine (PA), an edible antidote for treating heavy metal ions, not only effectively passivates the iodine vacancies (Pb²⁺ defects) through coordination with the –SH and –COOH groups in PA, but also finely tunes the crystallinity of Cs/FA-based perovskite film. Benefiting from these merits, a reduction of non-radiative recombination and an increase in photoluminescence lifetime have been achieved. As a result, the champion MA-free device exhibits an impressive power conversion efficiency (PCE) of 22.4%, an open-circuit voltage of 1.163 V, a notable fill factor of 82%, and excellent long-term operational stability. Moreover, the defect passivation strategy can be further extended to a mini module (substrate: 4 × 4 cm², active area: 7.2 cm²) as well as a wide-bandgap (∼1.73 eV) Cs/FA perovskite system by delivering PCEs of 16.3% and 20.2%, respectively, demonstrating its universality in defect passivation for efficient PSCs.

Iodine vacancy defects in MA-free perovskite are effectively passivated through the interaction between Pb²⁺ and the functional groups in d-penicillamine, resulting in an impressive efficiency of 22.4% along with excellent operational stability.     

Embedding wasted hairs in Ti/PbO2 anode for efficient and sustainable electrochemical oxidation of organic wastewater

Despite of the hazardous risk of Pb²⁺leakage,lead dioxide has been attributed as a quasi-ideal anode material with high oxygen evolution potential,excellent conductivity,good stability and low cost in electrochemical oxidation wastewater treatment technique.In this study,a novel Ti/PbO₂ anode was fabricated by embedding raw materials that are readily and cheaply available,i.e.,hairs.The structure-activity relationship of the new electrode was firstly revealed by material an...     

Novel ytterbium-doped CsPbI2Br thin-films–based inorganic perovskite solar cells toward improved phase stability

In this study, we used ytterbium (Yb²⁺) as a dopant in the CsPbI₂Br inorganic perovskite thin film and stabilized its black phase. Here, we varied the Yb²⁺ doping concentration in the CsPb_1?xYb_xI₂Br (x = 0–0.04) perovskite phase through simple solution method. The optimum concentration of Yb²⁺ showed improved morphology and crystal growth. The fabricated all-inorganic perovskite solar cells (IPVSCs) having CsPb_0.97Yb_0.03I₂Br-based champion device showed the highest 15.41% power conversion efficiency (PCE) for a small area of 0.09 cm² and 14.04% PCE for a large area of 1 × 1 cm² with excellent reproducibility, which is higher than the controlled CsPbI₂Br device. Detailed photovoltaic analysis revealed that the PCE, open-circuit voltage (V_OC), short circuit current density (J_SC) and fill factor (FF) of the final IPVSC device attributed to the suppressed charge recombination, better film quality, and well growth orientation of the perovskite film. Moreover, the champion CsPb_0.97Yb_0.03I₂Br device retains >85% initial efficiency after 280 h under 85 °C thermal annealings. Our results provide a new method to boost the performance of the photovoltaic application.     

Lead‐Free,Blue Emitting Bismuth Halide Perovskite Quantum Dots

Lead halide perovskite quantum dots (QDs) are promising candidates for future lighting applications, due to their high quantum yield, narrow full width at half maximum (FWHM), and wide color gamut. However, the toxicity of lead represents a potential obstacle to their utilization. Although tin(II) has been used to replace lead in films and QDs, the high intrinsic defect density and oxidation vulnerability typically leads to unsatisfactory material properties. Bismuth, with much lower toxicity than lead, is promising to constitute lead‐free perovskite materials because Bi³⁺ is isoelectronic to Pb²⁺ and more stable than Sn²⁺. Herein we report, for the first time, the synthesis and optical characterization of MA₃Bi₂Br₉ perovskite QDs with photoluminescence quantum yield (PLQY) up to 12 %, which is much higher than Sn‐based perovskite nanocrystals. Furthermore, the photoluminescence (PL) peaks of MA₃Bi₂X₉ QDs could be easily tuned from 360 to 540 nm through anion exchange.     

Lead‐Free,Blue Emitting Bismuth Halide Perovskite Quantum Dots

Lead halide perovskite quantum dots (QDs) are promising candidates for future lighting applications, due to their high quantum yield, narrow full width at half maximum (FWHM), and wide color gamut. However, the toxicity of lead represents a potential obstacle to their utilization. Although tin(II) has been used to replace lead in films and QDs, the high intrinsic defect density and oxidation vulnerability typically leads to unsatisfactory material properties. Bismuth, with much lower toxicity than lead, is promising to constitute lead‐free perovskite materials because Bi³⁺ is isoelectronic to Pb²⁺ and more stable than Sn²⁺. Herein we report, for the first time, the synthesis and optical characterization of MA₃Bi₂Br₉ perovskite QDs with photoluminescence quantum yield (PLQY) up to 12 %, which is much higher than Sn‐based perovskite nanocrystals. Furthermore, the photoluminescence (PL) peaks of MA₃Bi₂X₉ QDs could be easily tuned from 360 to 540 nm through anion exchange.     

Fluorine-Containing Passivation Layer via Surface Chelation for Inorganic Perovskite Solar Cells

Minimizing surface defect is vital to further improve power conversion efficiency (PCE) and stability of inorganic perovskite solar cells (PSCs). Herein, we designed a passivator trifluoroacetamidine (TFA) to suppress CsPbI_3−xBr_x film defects. The amidine group of TFA can strongly chelate onto the perovskite surface to suppress the iodide vacancy, strengthened by additional hydrogen bonds. Moreover, three fluorine atoms allow strong intermolecular connection via intermolecular hydrogen bonds, thus constructing a robust shield against moisture. The TFA-treated PSCs exhibit remarkably suppressed recombination, yielding the record PCEs of 21.35 % and 17.21 % for 0.09 cm² and 1.0 cm² device areas, both of which are the highest for all-inorganic PSCs so far. The device also achieves a PCE of 39.78 % under indoor illumination, the highest for all-inorganic indoor photovoltaic devices. Furthermore, TFA greatly improves device ambient stability by preserving 93 % of the initial PCE after 960 h.     

Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

Effect of Growth Temperature on the Characteristics of CsPbI3-Quantum Dots Doped Perovskite Film

In this study, adding CsPbI₃ quantum dots to organic perovskite methylamine lead triiodide (CH₃NH₃PbI₃) to form a doped perovskite film filmed by different temperatures was found to effectively reduce the formation of unsaturated metal Pb. Doping a small amount of CsPbI₃ quantum dots could enhance thermal stability and improve surface defects. The electron mobility of the doped film was 2.5 times higher than the pristine film. This was a major breakthrough for inorganic quantum dot doped organic perovskite thin films.     

Ligand Engineering Enables Efficient Pure Red Tin-Based Perovskite Light-Emitting Diodes

With increasing ecological and environmental concerns, tin (Sn)-based perovskite light-emitting diodes (PeLEDs) are competitive candidates for future displays because of their environmental friendliness, excellent photoelectric properties, and low-cost solution-processed fabrication. Nonetheless, their electroluminescence (EL) performance still lags behind that of lead (Pb)-based PeLEDs due to the fast crystallization rate of Sn-based perovskite films and undesired oxidation from Sn²⁺ to Sn⁴⁺, leading to poor film morphology and coverage, as well as high density defects. Here, we propose a ligand engineering strategy to construct high-quality phenethylammonium tin iodide (PEA₂SnI₄) perovskite films by using L-glutathione reduced (GSH) as surface ligands toward efficient pure red PEA₂SnI₄-based PeLEDs. We show that the hydrogen-bond and coordinate interactions between GSH and PEA₂SnI₄ effectively reduce the crystallization rate of the perovskites and suppress the oxidation of Sn²⁺ and formation of defects. The improved pure red perovskite films not only show excellent uniformity, density, and coverage but also exhibit enhanced optical properties and stability. Finally, state-of-the-art pure red PeLEDs achieve a record external quantum efficiency of 9.32 % in the field of PEA₂SnI₄-based devices. This work demonstrates that ligand engineering represents a feasible route to enhance the EL performance of Sn-based PeLEDs.     

Regulating synthesis and photochromic behavior via interfacial Eu3+/Eu2+-Pb0/Pb2+ redox of the CsPbCl1.5Br1.5@ Ca0.9Eu0.1MoO4 porous composites

Halogen vacancies are regarded to play a vital role in photo-induced phase segregation and the resulting switchable emission colors in the soft mixed-halide perovskites; however, its control strategy via the balanced Pb⁰ defects remains a big challenge. The research reports the regulation of synthesis and photochromic behavior via interfacial Eu³⁺/Eu²⁺-Pb⁰/Pb²⁺ redox in composites of porous Ca_0.9Eu_0.1MoO₄ and nominal mixed-halide perovskite CsPbCl_1.5Br_1.5. The composite takes full advantage of Eu³⁺ ions with the concerns of its luminescence and variable valences. It provides an additional emission color besides the halide perovskite, manipulates the Pb⁰ defects and the resulting Br-rich domain via interfacial redox reaction in the composites. The more contents of surfaced Eu³⁺ caused by substituting the unequivalent Ca²⁺ ions and the high volume-to-surface ratio of the porous Ca_0.9Eu_0.1MoO₄ guarantees the interfacial access for the Eu³⁺ and the halides. The research provides some perspectives on the regulation of ionic valence and photoluminescence of halide perovskites with the use of lanthanide ions. The composites may find potential applications in the anti-counterfeiting field.     

Synthesis, structures, physicochemical properties, and crystal-chemical systematics of M 2II AIIUO6 (MII = Pb, Ba, Sr; AII = Mg, Ca, Sr, Ba, Mn, Fe, Co, Ni, Cu, Zn, Cd, Pb) compounds

Pb₂A^IIUO₆ (A^II = Mg, Ca, Sr, Ni, Zn, Cd) compounds were synthesized by high-temperature reactions in the solid phase. For the Pb₂MgUO₆, Pb₂CaUO₆, and Pb₂CdUO₆ compounds, the crystal structures (space group P2₁/n) were refined by the Rietveld method. It was demonstrated that these structures belong to the perovskite structure type. Crystal-chemical systematics was performed for all synthesized perovskites. High-temperature X-ray diffraction and differential scanning calorimetry were used to study the thermal stability and phase transitions, determine the thermal expansion coefficients, and elucidate the effect of atoms located in octahedral and cuboctahedral positions on the heating behavior of the structure. The standard enthalpies of formation of the Pb₂A^IIUO₆ compounds were determined by reaction calorimetry.     

Mn2+掺杂准二维钙钛矿(PEA)2PbyMn1-yBr4的制备及其电致发光性能

制备了具有高荧光量子产率(photoluminescence quantum yield, PLQY)的 Mn²⁺掺杂准二维钙钛矿(PEA)₂Pb_yMn_1-yBr₄(PEA为苯乙胺, y 为 Pb²⁺占 Mn²⁺和 Pb²⁺总含量的物质的量分数)薄膜。宽带隙的(PEA)₂PbBr₄作为给体, 掺杂杂质 Mn²⁺作为受体, 构筑了双发射的激发态传递系统。通过调控 Mn²⁺掺杂的不同比例对(PEA)₂Pb_yMn_1-yBr₄的发光性能和薄膜形貌的影响, 发现当前驱体溶液中 Mn²⁺与 Pb²⁺的物质的量之比为 1:4 时, 薄膜有着最高的 PLQY 和最低的表面粗糙度。利用飞秒瞬态吸收(transientabsorption, TA)光谱, 追踪其动力学过程, 发现主客体之间的激发态传递是通过电荷转移来实现的。为了研究材料的电致发光特性, 我们将(PEA)₂Pb_yMn_1-yBr₄作为活性层, 加工得到了发光二极管(light emitting diodes, LEDs)。在室温下, 器件发出明亮的橙色, 其最高的发光强度为 0.21 cd·m^-2, 外量子效率(external quantum efficiency, EQE)为 0.002 5 %。     

Surface Termination on Unstable Methylammonium-based Perovskite Using a Steric Barrier for Improved Perovskite Solar Cells

Compared to widely adopted low-dimensional/three-dimensional (LD/3D) heterostructure, functional organic cation based surface termination on perovskite can not only realize advantage of defect passivation but also prevent potential disadvantage of the heterostructure induced intercalation into 3D perovskite. However, it is still very challenging to controllably construct surface termination on organic–inorganic hybrid perovskite because the functional organic cations’ substitution reaction is easy to form LD/3D heterostructure. Here, we report using a novel benzyltrimethylammonium (BTA) functional cation with rational designed steric hindrance to effectively surface terminate onto methylammonium lead triiodide (MAPbI₃) perovskite, which is composed of the most unstable MA cations. The BTA cation is difficult to form a specific 1.5-dimensional perovskite of BTA₄Pb₃I₁₀ by cation substitution with MA cation, which then provides a wide processing window (around 10 minutes) for surface terminating on MAPbI₃ films. Moreover, the BTAI surface terminated BTAI-MAPbI₃ shows better passivation effect than BTA₄Pb₃I₁₀-MAPbI₃ heterojunction. Finally, BTAI surface terminated solar cell (0.085 cm²) and mini-module (11.52 cm²) obtained the efficiencies of 22.03 % and 18.57 %, which are among the highest efficiencies for MAPbI₃ based ones.     

Antioxidant Grain Passivation for Air‐Stable Tin‐Based Perovskite Solar Cells

Tin‐based perovskites with excellent optoelectronic properties and suitable band gaps are promising candidates for the preparation of efficient lead‐free perovskite solar cells (PSCs). However, it is challenging to prepare highly stable and efficient tin‐based PSCs because Sn²⁺ in perovskites can be easily oxidized to Sn⁴⁺ upon air exposure. Here we report the fabrication of air‐stable FASnI₃ solar cells by introducing hydroxybenzene sulfonic acid or its salt as an antioxidant additive into the perovskite precursor solution along with excess SnCl₂. The interaction between the sulfonate group and the Sn²⁺ ion enables the in situ encapsulation of the perovskite grains with a SnCl₂–additive complex layer, which results in greatly enhanced oxidation stability of the perovskite film. The corresponding PSCs are able to maintain 80 % of the efficiency over 500 h upon air exposure without encapsulation, which is over ten times longer than the best result reported previously. Our results suggest a possible strategy for the future design of efficient and stable tin‐based PSCs.