Classification of Honey Powder Composition by FTIR Spectroscopy Coupled with Chemometric Analysis

Fourier transform infrared spectroscopy (FTIR) in connection with chemometric analysis were used as a fast and direct approach to classify spray dried honey powder compositions in terms of honey content, the type of diluent (water or skim milk), and carrier (maltodextrin or skim milk powder) used for the preparation of feed solutions before spray drying. Eleven variants of honey powders containing different amounts of honey, the type of carrier, and the diluent were investigated and compared to pure honey and carrier materials. Chemometric discrimination of samples was achieved by principal component analysis (PCA), hierarchical clustering analysis (HCA), linear discriminant analysis (LDA), and partial least squares-discriminant analysis (PLS-DA) modelling procedures performed on the FTIR preprocessed spectral data for the fingerprint region (1800–750 cm⁻¹) and the extended region (3600–750 cm⁻¹). As a result, it was noticed that the type of carrier is a significant factor during the classification of different samples of powdered multifloral honey. PCA divided the samples based on the type of carrier, and additionally among maltodextrin-honey powders it was possible to distinguish the type of diluent. The result obtained by PCA-LDA and PLS-DA scores yielded a clear separation between four classes of samples and showed a very good discrimination between the different honey powder with a 100.0% correct overall classification rate of the samples.     

Molecular Characteristics and Antioxidant Activity of Spruce (Picea abies) Hemicelluloses Isolated by Catalytic Oxidative Delignification

Spruce (Picea abies) wood hemicelluloses have been obtained by the noncatalytic and catalytic oxidative delignification in the acetic acid-water-hydrogen peroxide medium in a processing time of 3–4 h and temperatures of 90–100 °C. In the catalytic process, the H₂SO₄, MnSO₄, TiO₂, and (NH₄)₆Mo₇O₂₄ catalysts have been used. A polysaccharide yield of up to 11.7 wt% has been found. The hemicellulose composition and structure have been studied by a complex of physicochemical methods, including gas and gel permeation chromatography, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The galactose:mannose:glucose:arabinose:xylose monomeric units in a ratio of 5:3:2:1:1 have been identified in the hemicelluloses by gas chromatography. Using gel permeation chromatography, the weight average molar mass M_w of hemicelluloses has been found to attain 47,654 g/mol in noncatalytic delignification and up to 42,793 g/mol in catalytic delignification. Based on the same technique, a method for determining the α and k parameters of the Mark–Kuhn–Houwink equation for hemicelluloses has been developed; it has been established that these parameters change between 0.33–1.01 and 1.57–472.17, respectively, depending on the catalyst concentration and process temperature and time. Moreover, the FTIR spectra of the hemicellulose samples contain all the bands characteristic of heteropolysaccharides, specifically, 1069 cm⁻¹ (C–O–C and C–O–H), 1738 cm⁻¹ (ester C=O), 1375 cm⁻¹ (–C–CH₃), 1243 cm⁻¹ (–C–O–), etc. It has been determined by the thermogravimetric analysis that the hemicelluloses isolated from spruce wood are resistant to heating to temperatures of up to ~100 °C and, upon further heating, start destructing at an increasing rate. The antioxidant activity of the hemicelluloses has been examined using the compounds simulating the 2,2-diphenyl-2-picrylhydrazyl free radicals.     

Large Amplitude Motions of Pyruvic Acid (CH3-CO-COOH)

Torsional and rotational spectroscopic properties of pyruvic acid are determined using highly correlated ab initio methods and combining two different theoretical approaches: Second order perturbation theory and a variational procedure in three-dimensions. Four equilibrium geometries of pyruvic acid, Tc, Tt, Ct, and CC, outcome from a search with CCSD(T)-F12. All of them can be classified in the C_s point group. The variational calculations are performed considering the three internal rotation modes responsible for the non-rigidity as independent coordinates. More than 50 torsional energy levels (including torsional subcomponents) are localized in the 406–986 cm⁻¹ region and represent excitations of the ν₂₄ (skeletal torsion) and the ν₂₃ (methyl torsion) modes. The third independent variable, the OH torsion, interacts strongly with ν₂₃. The A₁/E splitting of the ground vibrational state has been evaluated to be 0.024 cm⁻¹ as it was expected given the high of the methyl torsional barrier (338 cm⁻¹). A very good agreement with respect to previous experimental data concerning fundamental frequencies (ν^CAL − ν^EXP ~ 1 cm⁻¹), and rotational parameters (B₀^CAL − B₀^EXP < 5 MHz), is obtained.     

Impact of anion polarizability on ion pairing in microhydrated salt clusters

Despite longstanding interest in the mechanism of salt dissolution in aqueous media, a molecular level understanding remains incomplete. Here, cryogenic ion trap vibrational action spectroscopy is combined with electronic structure calculations to track salt hydration in a gas phase model system one water molecule at a time. The infrared photodissociation spectra of microhydrated lithium dihalide anions [LiXX′(H₂O)_n]⁻ (XX′ = I₂, ClI and Cl₂; n = 1–3) in the OH stretching region (3800–2800 cm⁻¹) provide a detailed picture of how anion polarizability influences the competition among ion–ion, ion–water and water–water interactions. While exclusively contact ion pairs are observed for n = 1, the formation of solvent-shared ion pairs, identified by markedly red-shifted OH stretching bands (<3200 cm⁻¹), originating from the bridging water molecules, is favored already for n = 2. For n = 3, Li⁺ reaches its maximum coordination number of four only in [LiI₂(H₂O)₃]⁻, in accordance with the hard and soft Lewis acid and base principle. Water–water hydrogen bond formation leads to a different solvent-shared ion pair motif in [LiI₂(H₂O)₃]⁻ and network formation even restabilizes the contact ion pair motif in [LiCl₂(H₂O)₃]⁻. Structural assignments are exclusively possible after the consideration of anharmonic effects. Molecular dynamics simulations confirm that the significance of large amplitude motion (of the water molecules) increases with increasing anion polarizability and that needs to be considered already at cryogenic temperatures.

Infrared spectroscopy of microhydrated salt clusters provides a detailed picture of how anion polarizability influences the interactions between ions and water.     

The Structural and Optical Properties of 1,2,4-Triazolo[4,3-a]pyridine-3-amine

The structural and spectroscopic properties of a new triazolopyridine derivative (1,2,4-triazolo[4,3-a]pyridin-3-amine) are described in this paper. Its FTIR spectrum was recorded in the 100–4000 cm⁻¹ range and its FT-Raman spectrum in the range 80–4000 cm⁻¹. The molecular structure and vibrational spectra were analyzed using the B3LYP/6-311G(2d,2p) approach and the GAUSSIAN 16W program. The assignment of the observed bands to the respective normal modes was proposed on the basis of PED calculations. XRD studies revealed that the studied compound crystallizes in the centrosymmetric monoclinic space group P2₁/n with eight molecules per unit cell. However, the asymmetric unit contains two 1,2,4-triazolo[4,3-a]pyridin-3-amine molecules linked via N–H⋯N hydrogen bonds with a R₂²(8) graph. The stability of the studied molecule was considered using NBO analysis. Electron absorption and the luminescence spectra were measured and discussed in terms of the calculated singlet, triplet, HOMO and LUMO electron energies. The Stokes shifts derived from the optical spectra were equal to 9410 cm⁻¹ for the triazole ring and 7625 cm⁻¹ for the pyridine ring.     

Mixed-Valent Trinuclear CoIII-CoII-CoIII Complex with 1,3-Bis(5-chlorosalicylideneamino)-2-propanol

A mixed-valent trinuclear complex with 1,3-bis(5-chlorosalicylideneamino)-2-propanol (H₃clsalpr) was synthesized, and the crystal structure was determined by the single-crystal X-ray diffraction method at 90 K. The molecule is a trinuclear Co^III-Co^II-Co^III complex with octahedral geometries, having a tetradentate chelate of the Schiff-base ligand, bridging acetate, monodentate acetate coordination to each terminal Co³⁺ ion and four bridging phenoxido-oxygen of two Schiff-base ligands, and two bridging acetate-oxygen atoms for the central Co²⁺ ion. The electronic spectral feature is consistent with the mixed valent Co^III-Co^II-Co^III. Variable-temperature magnetic susceptibility data could be analyzed by consideration of the axial distortion of the central Co²⁺ ion with the parameters Δ = –254 cm⁻¹, λ = –58 cm⁻¹, κ = 0.93, tip = 0.00436 cm³ mol⁻¹, θ = –0.469 K, g_z = 6.90, and g_x = 2.64, in accordance with a large anisotropy. The cyclic voltammogram showed an irreversible reduction wave at approximately −1.2 V·vs. Fc/Fc⁺, assignable to the reduction of the terminal Co³⁺ ions.     

In silico design to enhance the barrier height for magnetization reversal in Dy(iii) sandwich complexes by stitching them under the umbrella of corannulene

Lanthanide based single molecular magnets (SMMs), particularly dysprocenium based SIMs, are well known for their high energy barrier for spin reversal (U_eff) and blocking temperatures (T_B). Enhancing these two parameters and at the same time obtaining ambient stability is key to realising end-user applications such as compact storage or as qubits in quantum computing. In this work, by employing an array of theoretical tools (DFT, ab initio CASSCF and molecular dynamics), we have modelled six complexes [(η⁵-corannulene)Dy(Cp)] (1), [(η⁵-corannulene)Dy(C₆H₆)] (2), [(η⁶-corannulene)Dy(Cp)] (3), [(η⁶-corannulene)Dy(C₆H₆)] (4), [(exo-η⁵-corannulene)Dy(endo-η⁵-corannulene)] (5), and [(endo-η⁵-corannulene)Dy(endo-η⁵-corannulene)] (6) containing corannulene as a capping ligand to stabilise Dy(iii) half-sandwich complexes. Our calculations predict a strong axiality exerted by the Dy–C interactions in all complexes. Ab initio calculations predict a very large barrier height for all six molecules in the order 1 (919 cm⁻¹) ≈ 3 (913 cm⁻¹) > 2 (847 cm⁻¹) > 4 (608 cm⁻¹) ≈ 5 (603 cm⁻¹) ≈ 6 (599 cm⁻¹), suggesting larger barrier heights for Cp ring systems, followed by six-membered arene systems and then corannulene. DFT based molecular dynamics calculations were performed on complexes 3, 5 and 6. For complexes 3 and 5, the geometries that are dynamically accessible are far fewer. The range of U_eff computed for molecular dynamics snapshots is high, indicating a possibility of translating the large U_eff obtained into attractive blocking temperatures in these complexes, but the converse is found for 6. Furthermore, an in-depth C–H bond vibrational analysis performed on complex 3 suggests that the vibration responsible for reducing the blocking temperature in dysprocenium SIMs is absent here as the C–H bonds are stronger and corannulene steric strain prevents the C(Cp)–Dy–C(Cor) bending. As [(η⁶-corannulene)TM(X)]⁺ (TM = Ru, Zr, Os, Rh, Ir and X = C₅Me₅, C₆Me₆) are known, the predictions made here have a higher prospect of yielding stability under ambient conditions, a very large U_eff value and a high blocking temperature – a life-giving combination to new generation SMMs.

Bringing half-sandwich Dy(iii) SIMs under the umbrella of corannulene was found to offer stability, greater barrier height and may offer higher blocking temperatures.     

Rapid Identification for the Pterocarpus Bracelet by Three-Step Infrared Spectrum Method

In order to explore a rapid identification method for the anti-counterfeit of commercial high value collections, a three-step infrared spectrum method was used for the pterocarpus collection identification to confirm whether a commercial pterocarpus bracelet (PB) was made from the precious species of Pterocarpus santalinus (P. santalinus). In the first step, undertaken by Fourier transform infrared spectroscopy (FTIR) spectrum, the absorption peaks intensity of PB was slightly higher than that of P. santalinus only at 1594 cm⁻¹, 1205 cm⁻¹, 1155 cm⁻¹ and 836 cm⁻¹. In the next step of second derivative IR spectra (SDIR), the FTIR features of the tested samples were further amplified, and the peaks at 1600 cm⁻¹, 1171 cm⁻¹ and 1152 cm⁻¹ become clearly defined in PB. Finally, by means of two-dimensional correlation infrared (2DIR) spectrum, it revealed that the response of holocellulose to thermal perturbation was stronger in P. santalinus than that in PB mainly at 977 cm⁻¹, 1008 cm⁻¹, 1100 cm⁻¹, 1057 cm⁻¹, 1190 cm⁻¹ and 1214 cm⁻¹, while the aromatic functional groups of PB were much more sensitive to the thermal perturbation than those of P. santalinus mainly at 1456 cm⁻¹, 1467 cm⁻¹, 1518 cm⁻¹, 1558 cm⁻¹, 1576 cm⁻¹ and 1605 cm⁻¹. In addition, fluorescence microscopy was used to verify the effectiveness of the above method for wood identification and the results showed good consistency. This study demonstrated that the three-step IR method could provide a rapid and effective way for the anti-counterfeit of pterocarpus collections.     

Inhibition of Lipid Accumulation and Adipokine Levels in Maturing Adipocytes by Bauhinia rufescens (Lam.) Stem Bark Extract Loaded Titanium Oxide Nanoparticles

The present study reports a cost-effective, environmentally friendly method to increase the bioavailability and bio-efficacy of B. rufescens stem bark extract in the biological system via functional modification as B. rufescens stem bark nanoparticles (BR-TO₂-NPs). The biosynthesis of BR- -NPs was confirmed by UV-visible (UV-vis) and Fourier-transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction analyses. The shifts in FT-IR stretching vibrations of carboxylic and nitro groups (1615 cm⁻¹), the O–H of phenolics or carboxylic acids (3405 cm⁻¹), alkanes, and alkyne groups (2925 and 2224 cm⁻¹) of the plant extract and lattice (455) indicated successful biosynthesis of BR- -NPs. Compared with the stem bark extract, 40 ng/dL dose of BR- -NPs led to a reduction in adipogenesis and an increase in mitochondrial biogenesis-related gene expressions, adiponectin-R1, PPARγC1α, UCP-1, and PRDM16, in maturing-adipocytes. This confirmed the intracellular uptake, bioavailability, and bio-efficiency of BR-TiO₂-NPs. The lipid-lowering capacity of BR-TiO₂-NPs effectively inhibited the metabolic inflammation-related gene markers, IL-6, TNF-α, LTB4-R, and Nf-κb. Further, BR-TiO₂-NPs stimulating mitochondrial thermogenesis capacity was proven by the significantly enhanced CREB-1 and AMPK protein levels in adipocytes. In conclusion, BR-TiO₂-NPs effectively inhibited lipid accumulation and proinflammatory adipokine levels in maturing adipocytes; it may help to overcome obesity-associated comorbidities.     

Spectrophotometric Determination of Molybdenum(VI) as a Ternary Complex with 4-Nitrocatechol and Benzalkonium Chloride

A new liquid—liquid extraction system for molybdenum(VI) was studied. It contains 4-nitrocatechol (4NC) as a complexing chromogenic reagent and benzalkonium chloride (BZC) as a source of heavy cations (BZ⁺), which are prone to form chloroform-extractable ion-association complexes. The optimum conditions for the determination of trace molybdenum(VI) were found: concentrations of 4NC and BZC (7.5 × 10⁻⁴ mol dm⁻³ and 1.9 × 10⁻⁴ mol dm⁻³, respectively), acidity (3.75 × 10⁻² mol dm⁻³ H₂SO₄), extraction time (3 min), and wavelength (439 nm). The molar absorptivity, limit of detection, and linear working range were 5.5 × 10⁴ dm³ mol⁻¹ cm⁻¹, 5.6 ng cm⁻³, and 18.6–3100 μg cm⁻³, respectively. The effect of foreign ions was examined, and the developed procedure was applied to the analysis of synthetic mixtures and real samples (potable waters and steels). The composition of the extracted complex was 1:1:2 (Mo:4NC:BZ). Three possible structures of its anionic part [Mo^VI(4NC)O₂(OH)₂]²⁻ were discussed based on optimizations at the B3LYP/3-21G level of theory, and simulated UV/Vis absorption spectra were obtained with the TD Hamiltonian.     

Effect of Contact Area and Shape of Anode Current Collectors on Bacterial Community Structure in Microbial Fuel Cells

Low electrical conductivity of carbon materials is a source of potential loss for large carbonaceous electrode surfaces of MFCs due to the long distance traveled by electrons to the collector. In this paper, different configurations of titanium current collectors were used to connect large surfaces of carbon cloth anodes. The current collectors had different distances and contact areas to the anode. For the same anode surface (490 cm²), increasing the contact area from 28 cm² to 70 cm² enhanced power output from 58 mW·m⁻² to 107 mW·m⁻². For the same contact area (28 cm²), decreasing the maximal distance of current collectors to anodes from 16.5 cm to 7.75 cm slightly increased power output from 50 mW·m⁻² to 58 mW·m⁻². Molecular biology characterization (qPCR and 16S rRNA gene sequencing) of anodic bacterial communities indicated that the Geobacter number was not correlated with power. Moreover, Geobacter and Desulfuromonas abundance increased with the drop in potential on the anode and with the presence of fermentative microorganisms. Electrochemical impedance spectroscopy (EIS) showed that biofilm resistance decreased with the abundance of electroactive bacteria. All these results showed that the electrical gradient arising from collectors shapes microbial communities. Consequently, current collectors influence the performance of carbon-based anodes for full-scale MFC applications.     

Temperature-Dependent Dynamical Evolution in Coum/SBE-β-CD Inclusion Complexes Revealed by Two-Dimensional FTIR Correlation Spectroscopy (2D-COS)

A combination of Fourier transform infrared spectroscopy in attenuated total reflectance geometry (FTIR-ATR) and 2D correlation analysis (2D-COS) was applied here for the first time in order to investigate the temperature-dependent dynamical evolution occurring in a particular type of inclusion complex, based on sulfobutylether-β-cyclodextrin (SBE-β-CD) as hosting agent and Coumestrol (7,12-dihydorxcoumestane, Coum), a poorly-soluble active compound known for its anti-viral and anti-oxidant activity. For this purpose, synchronous and asynchronous 2D spectra were calculated in three different wavenumber regions (960–1320 cm⁻¹, 1580–1760 cm⁻¹ and 2780–3750 cm⁻¹) and over a temperature range between 250 K and 340 K. The resolution enhancement provided by the 2D-COS offers the possibility to extract the sequential order of events tracked by specific functional groups of the system, and allows, at the same time, the overcoming of some of the limits associated with conventional 1D FTIR-ATR analysis. Acquired information could be used, in principle, for the definition of an optimized procedure capable to provide high-performance T-sensitive drug carrier systems for different applications.     

Characterization and Evaluation of Antimicrobial Potential of Trigonella incise (Linn) Mediated Biosynthesized Silver Nanoparticles

The goal of the research was to explore a new green method used to synthesize silver nanoparticles (Ag NPs) from an aqueous extract of Trigonella incise, which serves as a reducing and stabilizing agent. The obtained results showed an 85% yield of nanoparticles by using 2:5 (v/v) of 5% plant extract with a 0.5 M solution of AgNO₃. Different techniques were used to characterize the synthesized Ag NPs, including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and UV–visible spectroscopy. The UV–visible spectra of green synthesized silver nanoparticles showed maximum absorption at a wavelength of 440 nm. The FT-IR studies revealed the stretching oscillation frequency of synthesized silver nanoparticles in the absorption band near 860 cm⁻¹. Similarly, the bending and stretching oscillation frequencies of the NH function group were assigned to the band in the 3226 cm⁻¹ and 1647 cm⁻¹ regions. The bending vibration of C-O at 1159 cm⁻¹ confirmed the carbonyl functional group that was also assigned to the small intensity band in the range of 2361 cm⁻¹. The X-ray diffraction analysis of Ag NPs revealed four distinct diffraction peaks at 2θ of 38°, 45°, 65° and 78°, corresponds to (111), (200), (220) and (311) of the face-centered cubic shape. The round shape morphology of Ag NPs with a mean diameter in the range 20–80 nm was analyzed via SEM images. Furthermore, the nanoparticles showed more significant antimicrobial activity against Salmonella typhi (S. typhi) and Staphylococcus aureus (S. aureus) with an inhibition zone of 21.5 mm and 20.5 mm at 6 μg/mL concentrations, respectively, once compared to the standard reference. At concentrations of 2 µg/mL and 4 µg/mL, all of the bacterial strains showed moderate activity, with inhibition zones ranging from 11 mm to 18.5 mm. Even at high concentrations of AgNPs, S. typhi showed maximum resistance. The best antifungal activity was observed by synthesized Ag NPs against Candida albicans (C. albicans) with 21 mm zone of inhibition, as compared to a standard drug which gives 22 mm of inhibition. Therefore, we conclude that the antibacterial and antifungal activities showed satisfactory results from the synthesized Ag NPs.     

Modulating the ground state,stability and charge transport in OFETs of biradicaloid hexahydro-diindenopyrene derivatives and a proposed method to estimate the biradical character

Biradicaloid compounds with an open-shell ground state have been the subject of intense research in the past decade. Although diindenoacenes are one of the most developed families, only a few examples have been reported as active layers in organic field-effect transistors (OFETs) with a charge mobility of around 10⁻³ cm² V⁻¹ s⁻¹ due to a steric disadvantage of the mesityl group to kinetically stabilize compounds. Herein, we disclose our efforts to improve the charge transport of the diindenoacene family based on hexahydro-diindenopyrene (HDIP) derivatives with different annelation modes for which the most reactive position has been functionalized with (triisopropylsilyl)ethynyl (TIPS) groups. All the HDIP derivatives show remarkably higher stability than that of TIPS-pentacene, enduring for 2 days to more than 30 days, which depends on the oxidation potential, the contribution of the singlet biradical form in the ground state and the annelation mode. The annelation mode affects not only the band gap and the biradical character (y₀) but also the value of the singlet–triplet energy gap (ΔE_S–T) that does not follow the reverse trend of y₀. A method based on comparison between experimental and theoretical bond lengths has been disclosed to estimate y₀ and shows that y₀ computed at the projected unrestricted Hartree–Fock (PUHF) level is the most relevant among those reported by all other methods. Thanks to their high stability, thin-film OFETs were successfully fabricated. Well balanced ambipolar transport was obtained in the order of 10⁻³ cm² V⁻¹ s⁻¹ in the bottom-gate/top-contact configuration, and unipolar transport in the top-gate/bottom-contact configuration was obtained in the order of 10⁻¹ cm² V⁻¹ s⁻¹ which is the highest value obtained for biradical compounds with a diindenoacene skeleton.

Biradicaloid HDIP derivatives show that the ΔE_S–T gap does not follow the reverse trend of the biradical character but depends more on the delocalization of the radical centres at the outer rings.     

Aphrodisiac Performance of Bioactive Compounds from Mimosa pudica Linn.: In Silico Molecular Docking and Dynamics Simulation Approach

Plants and their derived molecules have been traditionally used to manage numerous pathological complications, including male erectile dysfunction (ED). Mimosa pudica Linn. commonly referred to as the touch-me-not plant, and its extract are important sources of new lead molecules in drug discovery research. The main goal of this study was to predict highly effective molecules from M. pudica Linn. for reaching and maintaining penile erection before and during sexual intercourse through in silico molecular docking and dynamics simulation tools. A total of 28 bioactive molecules were identified from this target plant through public repositories, and their chemical structures were drawn using Chemsketch software. Graph theoretical network principles were applied to identify the ideal target (phosphodiesterase type 5) and rebuild the network to visualize the responsible signaling genes, proteins, and enzymes. The 28 identified bioactive molecules were docked against the phosphodiesterase type 5 (PDE5) enzyme and compared with the standard PDE5 inhibitor (sildenafil). Pharmacokinetics (ADME), toxicity, and several physicochemical properties of bioactive molecules were assessed to confirm their drug-likeness property. Molecular dynamics (MD) simulation modeling was performed to investigate the stability of PDE5–ligand complexes. Four bioactive molecules (Bufadienolide (−12.30 kcal mol⁻¹), Stigmasterol (−11.40 kcal mol⁻¹), Isovitexin (−11.20 kcal mol⁻¹), and Apigetrin (−11.20 kcal mol⁻¹)) showed the top binding affinities with the PDE5 enzyme, much more powerful than the standard PDE5 inhibitor (−9.80 kcal mol⁻¹). The four top binding bioactive molecules were further validated for a stable binding affinity with the PDE5 enzyme and conformation during the MD simulation period as compared to the apoprotein and standard PDE5 inhibitor complexes. Further, the four top binding bioactive molecules demonstrated significant drug-likeness characteristics with lower toxicity profiles. According to the findings, the four top binding molecules may be used as potent and safe PDE5 inhibitors and could potentially be used in the treatment of ED.     

Coordination polymer glass from a protic ionic liquid: proton conductivity and mechanical properties as an electrolyte

High proton conducting electrolytes with mechanical moldability are a key material for energy devices. We propose an approach for creating a coordination polymer (CP) glass from a protic ionic liquid for a solid-state anhydrous proton conductor. A protic ionic liquid (dema)(H₂PO₄), with components which also act as bridging ligands, was applied to construct a CP glass (dema)_0.35[Zn(H₂PO₄)_2.35(H₃PO₄)_0.65]. The structural analysis revealed that large Zn–H₂PO₄⁻/H₃PO₄ coordination networks formed in the CP glass. The network formation results in enhancement of the properties of proton conductivity and viscoelasticity. High anhydrous proton conductivity (σ = 13.3 mS cm⁻¹ at 120 °C) and a high transport number of the proton (0.94) were achieved by the coordination networks. A fuel cell with this CP glass membrane exhibits a high open-circuit voltage and power density (0.15 W cm⁻²) under dry conditions at 120 °C due to the conducting properties and mechanical properties of the CP glass.

A proton-conducting coordination polymer glass derived from a protic ionic liquid works as a moldable solid electrolyte and the anhydrous fuel cell showed I–V performance of 0.15 W cm⁻² at 120 °C.     

Synthesis,Characterization, Biological Evaluation,and In Silico Studies of Imidazolium-, Pyridinium-, and Ammonium-Based Ionic Liquids Containing n-Butyl Side Chains

Ionic liquids (ILs) have emerged as active pharmaceutical ingredients because of their excellent antibacterial and biological activities. Herein, we used the green-chemistry-synthesis procedure, also known as the metathesis method, to develop three series of ionic liquids using 1-methyl-3-butyl imidazolium, butyl pyridinium, and diethyldibutylammonium as cations, and bromide (Br⁻), methanesulfonate (CH₃SO₃⁻), bis(trifluoromethanesulfonyl)imide (NTf₂⁻), dichloroacetate (CHCl₂CO₂⁻), tetrafluoroborate (BF₄⁻), and hydrogen sulfate (HSO₄⁻) as anions. Spectroscopic methods were used to validate the structures of the lab-synthesized ILs. We performed an agar well diffusion assay by using pathogenic bacteria that cause various infections (Escherichia coli; Enterobacter aerogenes; Klebsiella pneumoniae; Proteus vulgaris; Pseudomonas aeruginosa; Streptococcus pneumoniae; Streptococcus pyogenes) to scrutinize the in vitro antibacterial activity of the ILs. It was established that the nature and unique combination of the cations and anions were responsible for the antibacterial activity of the ILs. Among the tested ionic liquids, the imidazolium cation and NTf₂⁻ and HSO₄⁻ anions exhibited the highest antibacterial activity. The antibacterial potential was further investigated by in silico studies, and it was observed that bis(trifluoromethanesulfonyl)imide (NTf₂⁻) containing imidazolium and pyridinium ionic liquids showed the maximum inhibition against the targeted bacterial strains and could be utilized in antibiotics. These antibacterial activities float the ILs as a promising alternative to the existing antibiotics and antiseptics.     

Optimizing Procedures of Ultrasound-Assisted Extraction of Waste Orange Peels by Response Surface Methodology

The simultaneous effects of three continuous factors: solvent concentration (50–100%), treated times (25–85 min), treated temperatures (25–55 °C), and two categorical factors: type of solvents (methanol or ethanol) and ultrasonic frequency (28 kHz or 40 kHz) on ultrasonic-assisted extraction yield from waste orange peels were evaluated and optimized by response surface methodology. Fourier Transform Infrared (FTIR) spectroscopy with a wavelength of 500 cm⁻¹ to 4000 cm⁻¹ was employed to rapidly identify the orange extracts. The significant polynomial regression models on crude extraction, sediments after evaporation, and precipitation yield were established (p < 0.05). Results revealed that solvent concentration affected crude extraction and precipitation yield linearly (p < 0.01). The optimal and practical ultrasound-assisted extraction conditions for increasing the precipitation yield were using 61.42% methanol with 85 min at 55 °C under 40 kHz ultrasonic frequency. The spectra of extracts showed a similar fingerprint of hesperidin.     

Pristine and Modified Porous Membranes for Zinc Slurry–Air Flow Battery

The membrane is a crucial component of Zn slurry–air flow battery since it provides ionic conductivity between the electrodes while avoiding the mixing of the two compartments. Herein, six commercial membranes (Cellophane™ 350PØØ, Zirfon^®, Fumatech^® PBI, Celgard^® 3501, 3401 and 5550) were first characterized in terms of electrolyte uptake, ion conductivity and zincate ion crossover, and tested in Zn slurry–air flow battery. The peak power density of the battery employing the membranes was found to depend on the in-situ cell resistance. Among them, the cell using Celgard^® 3501 membrane, with in-situ area resistance of 2 Ω cm² at room temperature displayed the highest peak power density (90 mW cm⁻²). However, due to the porous nature of most of these membranes, a significant crossover of zincate ions was observed. To address this issue, an ion-selective ionomer containing modified poly(phenylene oxide) (PPO) and N-spirocyclic quaternary ammonium monomer was coated on a Celgard^® 3501 membrane and crosslinked via UV irradiation (PPO-3.45 + 3501). Moreover, commercial FAA-3 solutions (FAA, Fumatech) were coated for comparison purpose. The successful impregnation of the membrane with the anion-exchange polymers was confirmed by SEM, FTIR and Hg porosimetry. The PPO-3.45 + 3501 membrane exhibited 18 times lower zincate ions crossover compared to that of the pristine membrane (5.2 × 10⁻¹³ vs. 9.2 × 10⁻¹² m² s⁻¹). With low zincate ions crossover and a peak power density of 66 mW cm⁻², the prepared membrane is a suitable candidate for rechargeable Zn slurry–air flow batteries.