RNA-sensitive N-isopropylacrylamide/vinylphenylboronic acid random copolymer

Random copolymers of N-isopropylacrylamide (NIPA) and 4-vinylphenylboronic acid (VPBA) were obtained by solution polymerization using 2,2′-azobisizobutyronitrile as the initiator in ethanol at 65 °C. NIPA-co-VPBA copolymer exhibited both temperature- and pH-sensitivity. Thermally reversible phase transitions were observed both in the acidic and alkaline pH region for the copolymers produced with different VPBA/NIPA feed ratios. The pH dependency of the lower critical solution temperature (LCST) was stronger for the copolymers produced with higher VPBA feed concentrations. RNA was selected as a model biomolecule having vicinal-diol and amino groups that were potentially reactive with the boronic acid groups of NIPA-co-VPBA copolymer. The effect of RNA concentration on the LCST of NIPA-co-VPBA copolymer was investigated in aqueous media at different pHs. Although no significant effect was observed at pH 4, 7 or 10.5, the LCST decreased linearly with increasing RNA concentration at a pH approximately equal to the pK_a of boronic acid. This behavior was explained by considering the binding of RNA onto the copolymer chains to occur via two types of complex formation. For the formation of these complexes, the amino and vicinal-diol groups of RNA should react with the boronic acid groups of the copolymer in the tetrahedral anionic form. The results indicated that NIPA-co-VPBA copolymer could be utilized as a new reagent for the determination of RNA concentration in aqueous media. The proposed method was valid for the RNA concentration range of 0–4 g · mL⁻¹.

The schematical representation of the possible interactions between NIPA-co-VPBA copolymer and RNA. (A) A typical structure of single-stranded RNA. (B) Tetrahedral anionic form of boronic acid groups. (C) The interaction between the amino groups of the unpaired bases of RNA and the boronic acid groups of the copolymer. (D) Cyclic borate ester formation by the interaction between vicinal diol groups located at the 3′-end of RNA and boronic acid groups of the copolymer.     

N=8 Armchair Graphene Nanoribbons: Solution Synthesis and High Charge Carrier Mobility**

Structurally defined graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic devices. Low band gap (<1 eV) GNRs are particularly important when considering the Schottky barrier in device performance. Here, we demonstrate the first solution synthesis of 8-AGNRs through a carefully designed arylated polynaphthalene precursor. The efficiency of the oxidative cyclodehydrogenation of the tailor-made polymer precursor into 8-AGNRs was validated by FT-IR, Raman, and UV/Vis-near-infrared (NIR) absorption spectroscopy, and further supported by the synthesis of naphtho[1,2,3,4-ghi]perylene derivatives ( 1 and 2 ) as subunits of 8-AGNR , with a width of 0.86 nm as suggested by the X-ray single crystal analysis. Low-temperature scanning tunneling microscopy (STM) and solid-state NMR analyses provided further structural support for 8-AGNR . The resulting 8-AGNR exhibited a remarkable NIR absorption extending up to ∼2400 nm, corresponding to an optical band gap as low as ∼0.52 eV. Moreover, optical-pump TeraHertz-probe spectroscopy revealed charge-carrier mobility in the dc limit of ∼270 cm² V⁻¹ s⁻¹ for the 8-AGNR .     

Design Strategy of Decorating Phenylcarbazole with a Donor and Acceptor for Blue-Shifted Emission in Thermally Activated Delayed Fluorescent Emitters

A series of blue thermally activated delayed fluorescent (TADF) emitters of 1′′-(4,6-diphenyl-1,3,5-triazin-2-yl)-9,9′′-diphenyl-9H,9′′H-3,3′:9′,4′′-tercarbazole (TrzCz1) and 3′,6′-di-tert-butyl-1-(4,6-diphenyl-1,3,5-triazin-2-yl)-9-phenyl-9H-4,9′-bicarbazole (TrzCz2) were synthesized through a molecular design approach to decorate phenylcarbazole with a donor and an acceptor. The 1- and 4-positions of the phenylcarbazole core were modified with a diphenyltriazine acceptor and a bicarbazole or tert-butylcarbazole donor, respectively, through a synthetic strategy to introduce Br at the 1-position and F at the 4-position. The TrzCz1 and TrzCz2 emitters showed maximum photoluminescence emission bands at λ=443 and 433 nm, which were blueshifted relative to those of the corresponding TADF emitters with the same donor and acceptor, respectively. In the device application, the TrzCz1 emitter showed a maximum external quantum efficiency of 22.4 %, with a color coordinate of (0.16, 0.21), and the TrzCz2 emitter showed a maximum external quantum efficiency of 9.9 %, with a color coordinate of (0.14, 0.09). This work proved that the design strategy of decorating phenylcarbazole with a donor and an acceptor is effective at blueshifting the emission of TADF emitters.     

Efficient Bottom‐Up Preparation of Graphene Nanoribbons by Mild Suzuki–Miyaura Polymerization of Simple Triaryl Monomers

Herein an efficient bottom‐up solution‐phase synthesis of N=9 armchair graphene nanoribbons (GNRs) is described. Catalyzed by Pd(PtBu₃)₂, Suzuki–Miyaura polymerization of a simple and readily available triaryl monomer provides a novel GNR precursor with a high molecular weight and excellent solubility. Upon cyclodehydrogenation, the resulting GNR exhibits semiconducting properties with an approximately 1.1 eV band gap (LUMO: ?3.52 eV; HOMO: ?4.66 eV) as characterized by UV/Vis‐NIR spectroscopy and cyclic voltammetry.     

Magnetism in Nonplanar Zigzag Edge Termini of Graphene Nanoribbons

Graphene nanoribbons (GNRs) and nanographenes synthesized by on-surface reactions using tailor-made molecular precursors offer an ideal playground for a study of magnetism towards nano-spintronics. Although the zigzag edge of GNRs has been known to host magnetism, the underlying metal substrates usually veil the edge-induced Kondo effect. Here, we report the on-surface synthesis of unprecedented, π-extended 7-armchair GNRs using 7-bromo-12-(10-bromoanthracen-9-yl)tetraphene as the precursor. Characterization by scanning tunneling microscopy/spectroscopy revealed unique rearrangement reactions leading to pentagon- or pentagon/heptagon-incorporated, nonplanar zigzag termini, which demonstrated Kondo resonances even on bare Au(111). Density functional theory calculations indicate that the nonplanar structure significantly reduces the interaction between the zigzag terminus and the Au(111) surface, leading to a recovery of the spin localization of the zigzag edge. Such a distortion of planar GNR structures offers a degree of freedom to control the magnetism on metal substrates.     

Fabrication of a template-synthesized gold nanorod-modified electrode for the detection of dopamine in the presence of ascorbic acid

Gold nanorods (GNRs) with suitable aspect ratio were synthesized with a template technique and then dispersed in a saturated sodium citrate solution by ultrasonication to form a GNR suspension. A GNR-modified electrode was fabricated using the GNR suspension. The oxidation of dopamine at the GNR/GC electrode exhibited surprisingly high electrocatalytic activity and adsorption-controlled characteristics. Square-wave voltammetry was used to detect dopamine. At the GNR/GC electrode, the linear concentration range of DA is from 1 × 10⁻⁸ M to 1 × 10⁻⁷ M and the detection limit (s/n = 3) is as low as 5.5 × 10⁻⁹ M. The current sensitivity is 3.280 μA/μM, and 1000-fold ascorbic acid (AA) cannot interfere with the determination of DA. All these performances are greatly superior to those of the bare GC electrode.     

Dispirocycles: Platforms for the Construction of High-Performance Host Materials for Phosphorescent Organic Light-Emitting Diodes

Spirocyclic compounds such as 9,9′-spirobifluorene (SBF) are becoming more and more attractive for use as host materials in organic optoelectronic devices. Herein, two dispirocycles, namely, dispiro[fluorene-9,9′-anthracene-10′,9′′-fluorene] and 10,10′′-diphenyl-10H,10′′H-dispiro[acridine-9,9′-anthracene-10′,9′′-acridine], were used for the construction of host materials 1 – 4 . The attached triphenylamino group determines the thermal, photophysical, electrochemical, and charge-transport properties, and therefore they have different electroluminescent performances. The device based on dispiro[fluorene-9,9′-anthracene-10′,9′′-fluorene] ( 2 ) and 10,10′′-diphenyl-10H,10′′H-dispiro[acridine-9,9′-anthracene-10′,9′′-acridine] ( 3 ) molecular platforms exhibited external quantum efficiencies of greater than 21 % with a very high power efficiency (≈100 lm W⁻¹). These results demonstrate the potential of extending the application of dispirocyclic molecular platforms with inherent rigidity for developing highly efficient host materials for organic light-emitting diodes.     

Low-Temperature Reactions of α-Bromopropanoyl Chloride with Lithium Derivative of Ethyl Acetate

The reaction of 2-bromopropanoyl chloride with lithium ethyl acetate generated in situ by the reaction of equimolar amounts of lithium diisopropylamide with ethyl acetate forms, depending on the conditions (temperature, time, reagent ratio), diethyl 2,2′-(3-methyloxirane-2,2-diyl)diacetate, 2,2-dibromo-N,N-diisopropylpropanamide, and ethyl (5-methyl-4-oxo-4,5-dihydrofuran-2-yl)acetate as minor by-products along with the expected acylation product ethyl 4-bromo-3-oxopentanoate. The reaction with 2 or 5 equiv of lithium ethyl acetate (–78°C → –20°C) gave, together with the mentioned α-bromo ester, ethyl (5-methyl-4-oxo-4,5-dihydrofuran-2-yl)acetate formed as a result of transformations of the adduct of the second LiCH₂CO₂Et molecule and ethyl-4-bromo-3-oxopentanoate. The reaction 2-bromopropanoyl chloride with sodium malonic ester involves acylation of enol form of the primary expected acylation product to afford dimethyl |2-bromo-1-[(2-bromopropanoyl)oxy]propylidene-malonate.

     

Alternating Intramolecular and Intermolecular Catalyst‐Transfer Suzuki–Miyaura Condensation Polymerization: Synthesis of Boronate‐Terminated π‐Conjugated Polymers Using Excess Dibromo Monomers

The Suzuki–Miyaura coupling polymerization of dibromoarene 1 and arylenediboronic acid (ester) 2 with a Pd catalyst having a high propensity for intramolecular catalyst transfer is reported. The polymerization of excess 1 with 2 affords high‐molecular‐weight π‐conjugated polymer having boronic acid (ester) moieties at both ends, contrary to Flory's principle. This unstoichiometric polycondensation behavior is accounted for by intramolecular transfer of the Pd catalyst on 1 . In the polymerization of 1 and 2 having different aryl residues, high‐molecular‐weight polymer is obtained when the stronger donor aromatic is used as the dibromo monomer and the weaker donor or acceptor aromatic is used as diboronic acid (ester) monomer. The pinacol boronate moieties at both ends of the obtained poly(p‐phenylene) (PPP) can be converted to benzoic acid ester, hydroxyl group, and bromine. Furthermore, the reaction of the pinacol boronate‐terminated PPP with poly(3‐hexylthiophene) (P3HT) having bromine at one end yields a triblock copolymer of P3HT‐b‐PPP‐b‐P3HT.

     

Facile Synthesis of 2-(4-Hydroxybiphenyl-3-yl)-1H-indoles from Anilines and 5′-Bromo-2′-hydroxyacetophenone

2-Arylindoles are attractive scaffolds because they are found in many pharmacologically active molecules. In this study, we describe the facile synthesis of diverse 2-(2-hydroxyphenyl)-1H-indoles from anilines and 5′-bromo-2′-hydroxyacetophenone in two steps using palladium-catalyzed indole cyclization as a key reaction. The indole cyclization was primarily controlled by the substituent properties of anilines. Suzuki-coupling reactions of 2-(5′-bromo-2′-hydroxyphenyl)-1H-indoles with arylboronic acids provided the corresponding 2-(4-hydroxybiphenyl-3-yl)-1H-indoles in moderate yield.     

Vitamin-B12-katalysierte C,C-Bindungsverknüpfung: Synthese von Jasmonaten via sequentielle Radikal-Reaktion

Vitamin-B₁₂-Catalyzed C, C-Bond Formation: Synthesis of Jasmonates via Sequential Radical Reaction The Cbl-catalyzed electroreduction of 3-(2′-bromo-1′-ethoxyethoxy)cyclopenten ( 1a ) in presence of 1-cyanovinyl-acetate ( 8 ) gave, in a sequential radical reaction (5-exo-trig-cyclization of 1a followed by addition to 8 ), 1-cyano-2-(2′-ethoxy-hexahydro-2′H-cyclopenta[b] furan-4′-yl)ethyl acetate ( 10a ). This intermediate was transformed to methyl jasmonate ( 7 ; four steps) and epituberolide ( 9 ; three steps) in 20 and 31% yield, respectively, from cyclopent-2-en-l-ol.     

The glucose‐responsive behavior of a block copolymer featuring boronic acid and glycine

Glucose responsive block copolymer featuring boronic acid as a glucose responsive moiety and glycine are reported. The first block is polymerized through reversible addition–fragmentation chain transfer (RAFT) polymerization and the resulting poly(N‐acryloylmorpholine)₁₁₃ (PAcM) is employed as a macro‐chain transfer agent for chain extension with pentafluorophenyl acrylate (PFPA) yielding a well‐defined PAcM₁₁₃‐block‐poly(pentafluorophenyl acrylate)₈₄ (PPFPA). The PPFPA block is then reacted with functional (3‐aminomethyl) phenyl boronic acid and glycine via post‐polymerization modification and the structure of the block copolymer is confirmed by proton nuclear magnetic resonance (NMR), ¹⁹F NMR, Fourier transform infrared, and gel permeation chromatography. By copolymerizing glycine into the polymer backbone, the relative pK_a of the block copolymer is significantly lowered. The block copolymer can self‐assemble into core–shell micelles in aqueous solution and disassemble in response to glucose at the physiological pH. Furthermore, the encapsulation and release of Nile red (NR) as a hydrophobic model drug is studied under the physiological pH. The influence of the glucose concentration on the NR release from the polymeric micelles is demonstrated. These results suggested that the glucose‐responsive poly[(AcM)₁₁₃‐b‐(3‐(aminomethyl)phenylboronic acid hydrochloride(‐co‐Gly)₈₄] block copolymer has potential applications as a glucose‐responsive polymer for insulin delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 422–431     

Coherent Anti‐Stokes Emission from Gold Nanorods and its Potential for Imaging Applications

We used coherent anti‐Stokes scattering (CAS) to characterize individual gold nanorods (GNRs) and GNR aggregates. By creating samples with different densities of GNRs on silicon wafer substrates, we were able to determine surface coverage by scanning electron microscopy (SEM) and then correlate the coverage to the CAS intensities of the samples. The observed CAS signal intensity was quadratically dependent on the number of particles. We also examined the CAS signal as a function of the excitation polarization and found that the strongest signals in regularly oriented GNRs were observed when the beam polarization was aligned with the longitudinal axis of the GNRs. Irregularly oriented GNRs exhibited a different scattering pattern to that observed for regularly oriented GNRs. The polarization‐dependent scattering from oriented GNRs showed cos⁶ (θ) behavior. By imaging nanoscale‐sized GNR patterns using CAS and evaluating the results with SEM, we show that CAS can be used for efficient, label‐free imaging of nanoscale metallic particles.     

Aqueous RAFT polymerization of N‐isopropylacrylamide‐mediated with hydrophilic macro‐RAFT agent: Homogeneous or heterogeneous polymerization?

Aqueous RAFT polymerization of N‐isopropylacrylamide (NIPAM) mediated with hydrophilic macro‐RAFT agent is generally used to prepare poly(N‐isopropylacrylamide) (PNIPAM)‐based block copolymer. Because of the phase transition temperature of the block copolymer in water being dependent on the chain length of the PNIPAM block, the aqueous RAFT polymerization is much more complex than expected. Herein, the aqueous RAFT polymerization of NIPAM in the presence of the hydrophilic macro‐RAFT agent of poly(dimethylacrylamide) trithiocarbonate is studied and compared with the homogeneous solution RAFT polymerization. This aqueous RAFT polymerization leads to the well‐defined poly(dimethylacrylamide)‐b‐poly(N‐isopropylacrylamide)‐b‐poly(dimethylacrylamide) (PDMA‐b‐PNIPAM‐b‐PDMA) triblock copolymer. It is found, when the triblock copolymer contains a short PNIPAM block, the aqueous RAFT polymerization undergoes just like the homogeneous one; whereas when the triblock copolymer contains a long PNIPAM block, both the initial homogeneous polymerization and the subsequent dispersion polymerization are involved and the two‐stage ln([M]_o/[M])‐time plots are indicated. The reason that the PNIPAM chain length greatly affects the aqueous RAFT polymerization is discussed. The present study is anticipated to be helpful to understand the chain extension of thermoresponsive block copolymer during aqueous RAFT polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Hydrophilic graft modification of a commercial crystalline polyolefin

Hydroxy‐functionalized isotactic poly(1‐butene) was synthesized using transition metal‐catalyzed regioselective C? H borylation at the side chain of the commercial polyolefin and subsequent oxidation of the boronic ester functionality. Functionalization up to ～ 19 mol % of the termini of the ethyl side chain occurred without significant side reactions that could alter the polymer chain length. Esterification of the hydroxy group in the polymer with 2‐bromoisobutyl bromide generated a side chain‐functionalized polyolefin macroinitiator. Atom transfer radical polymerization of tert‐butyl acrylate from the macroinitiator produced a high molecular‐weight graft copolymer of the polyolefin, isotactic poly(1‐butene)‐graft‐poly(tert‐butyl acrylate) (PB‐g‐PtBA). Finally, the hydrolysis of the tert‐butoxy ester group of PB‐g‐PtBA created an amphiphilic polyolefin, isotactic poly(1‐butene)‐graft‐poly(acrylic acid), which contained a short carboxylic acid‐functionalized polymer block at the side chain. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3533–3545, 2008     

Bottom‐Up On‐Surface Synthesis of Two‐Dimensional Graphene Nanoribbon Networks and Their Thermoelectric Properties

Graphene, the one‐atom‐thick two‐dimensional (2D) carbon material, has attracted tremendous interest in both academia and industry due to its outstanding electrical, mechanical, and thermal properties. For electronic applications, the challenging task is to make it as a semiconductor. The bottom‐up synthesis of semiconducting one‐dimensional (1D) nanometer‐wide graphene strips, namely, graphene nanoribbons (GNRs), has attracted much attention owing to its promising electronic, optical, and magnetic properties. In this regard, we report the fabrication of cove‐type 2D GNR networks (GNNs) via the interconnection of 1D self‐assembled GNRs on the surface of Au(111). The cove‐type 2D GNRs networks (GNNs) were fabricated from the GNR, 5‐CGNR‐1‐1 , synthesized using the precursor of DBSP . Annealing of high‐density self‐assembled GNRs on the surface of Au(111) through two‐zone chemical vapour deposition (2Z CVD) successfully generated a 2D interconnected structure with high yield via the fusion and ladder coupling reactions of GNR chains. In order to validate the later fusion reaction, we have also synthesized the GNR, 7‐AGNR‐1‐1 , using the precursor of DBBA . The GNNs, which consist of hybridized metallic‐like and semiconducting GNRs, are a new class of carbon‐based materials. Further, we applied this material for thermoelectric (TE) applications and found a very low cross‐plane thermal conductivity of 0.11 Wm^?1 K^?1, which is one of the lowest value among the carbon‐based materials as well as inorganic semiconductors, while maintaining the cross‐plane electrical conductivity of 188 S m^?1.     

Regio‐ and stereospecific assembly of dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidines] from simple precursors using a one‐pot procedure: synthesis,spectroscopic and structural characterization,and a proposed mechanism of formation

The synthesis and characterization of three new dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine] compounds are reported, together with the crystal structures of two of them. (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐Chlorophenyl)‐1‐hexyl‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₂₈H₃₀ClN₃O₂S₂, (I), (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐chlorophenyl)‐1‐benzyl‐5‐methyl‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₃₀H₂₆ClN₃O₂S₂, (II), and (3RS,1′SR,2′SR,7a′SR)‐2′‐(4‐chlorophenyl)‐5‐fluoro‐2′′‐sulfanylidene‐5′,6′,7′,7a′‐tetrahydro‐2′H‐dispiro[indoline‐3,3′‐pyrrolizine‐1′,5′′‐thiazolidine]‐2,4′′‐dione, C₂₂H₁₇ClFN₃O₂S₂, (III), were each isolated as a single regioisomer using a one‐pot reaction involving l ‐proline, a substituted isatin and (Z)‐5‐(4‐chlorobenzylidene)‐2‐sulfanylidenethiazolidin‐4‐one [5‐(4‐chlorobenzylidene)rhodanine]. The compositions of (I)–(III) were established by elemental analysis, complemented by high‐resolution mass spectrometry in the case of (I); their constitutions, including the definition of the regiochemistry, were established using NMR spectroscopy, and the relative configurations at the four stereogenic centres were established using single‐crystal X‐ray structure analysis. A possible reaction mechanism for the formation of (I)–(III) is proposed, based on the detailed stereochemistry. The molecules of (I) are linked into simple chains by a single N—H…N hydrogen bond, those of (II) are linked into a chain of rings by a combination of N—H…O and C—H…S=C hydrogen bonds, and those of (III) are linked into sheets by a combination of N—H…N and N—H…S=C hydrogen bonds.     

Amphiphilic block copolymer of 9-vinylphenanthrene and methacrylic acid: Fluorescence quenching of phenanthrene residue in aqueous medium

Amphiphilic block copolymers of 9-vinylphenanthrene (VPh) and methacrylic acid (MA) were prepared by a two-step living anionic polymerization of VPh and trimethylsilyl methacrylate followed by hydrolysis of the trimethylsilyl ester groups. Bis(2-hydroxyethyl) terephthalate, an oxidative quenching agent with amphiphilic nature, strongly quenched the fluorescence of phenanthrene groups in the block copolymer in aquecus solution. Apparent second-order rate constants k_q for the quenching ranged in the magnitude of 10¹¹?10¹²M^?1 s^?1 in the borate (pH 9) and phosphate (pH 7) buffers, whereas those in DMF solution were found to be ～10⁹M^?1 s^?1. No such difference in k_q for the aqueous and DMF solutions was observed with the related random copolymer. The results suggest that a considerable increase in the effective concentration of the quencher around the VPh sequences in the block copolymer resulted from hydrophobic association. Fumaric acid (FA), an anionic quencher, did not quench the fluorescence of the copolymer at pH 9 and 7, presumably because of the lack of accessibility of the quencher to the copolymer due to electrostatic repulsion. However, in neat water in which only a part of the carboxyl groups of MA sequences are dissociated and therefore the charge effect is minimized, FA quenched the fluorescence, with the k_q value approximating the diffusion control limit.     

Block and graft copolymers by selective cationic initiation. II. Synthesis and characterization of styrene-isobutylene block copolymers by use of chlorobrominated alkanes

The synthesis and characterization of a new block copolymer, poly(styrene-b-isobutylene) (PSt-b-PIB), is described. The synthesis involves the initiation of an isobutylene polymerization by a polystyrene molecule containing a terminal tertiary bromine (PSt-Br), in conjunction with diethylaluminum chloride coinitiator. The species PSt-Br is in turn synthesized by initiating the polymerization of styrene selectively by the tertiary chlorine of the 2-bromo-6-chloro-2,6-dimethylheptane/Et₃Al initiator system in the absence of chain transfer. The conditions conducive for selective initiation by tertiary chlorine have been worked out. The pure block copolymer, PSt-b-PIB, is obtained by selective extraction and some of its properties were determined, e.g., solubility and film behavior, T_g, and intrinsic viscosity versus temperature. The intrinsic viscosity (in toluene) exhibits a maximum and a minimum in the temperature range from 15 to 55°C.     

Contribution à la phytochimie du genre Gentiana. XXV. Etude des composés flavoniques et xanthoniques dans les feuilles de Gentiana X marcailhouana RY. Nouveaux cinnamoyl-C-glucosides flavoniques

Phytochemistry of genus Gentiana XXV: Study of the flavonic and xanthonic compounds in leaves of Gentiana X marcailhouana RY . New cinnamoyl-C-glucosyl-flavones Nine flavonic compounds: isoorientin ( 1 ), isovitexin ( 2 ), isoorientin-4′-O-β-D -glucoside ( 3 ), isovitexin-4′-O-β-D -glucoside ( 4 ), luteolin-7-O-β-D -glucoside ( 5 ), trans-cafeoyl-2′′-isoorientin ( 6 ), trans-feruloyl-2′′-isoorientin ( 7 ), trans-p-coumaroyl-2′′-isoorientin ( 8 ), p-O-β-D -glucosyl-trans-cafeoyl-2′′-isoorientin ( 9 ) and three xanthones: gentioside ( 10 ), isogentisine ( 11 ), mangiferin ( 12 ), have been identified from leaves of Gentiana X marcailhouana RY . Compounds 8 and 9 were described for the first time. The cyclitol L -(+)-bornesitol ( 13 ) has been also isolated.