Triplet Generation Through Singlet Fission in Metal-Organic Framework: An Alternative Route to Inefficient Singlet-Triplet Intersystem Crossing

High quantum yield triplets, populated by initially prepared excited singlets, are desired for various energy conversion schemes in solid working compositions like porous MOFs. However, a large disparity in the distribution of the excitonic center of mass, singlet-triplet intersystem crossing (ISC) in such assemblies is inhibited, so much so that a carboxy-coordinated zirconium heavy metal ion cannot effectively facilitate the ISC through spin-orbit coupling. Circumventing this sluggish ISC, singlet fission (SF) is explored as a viable route to generating triplets in solution-stable MOFs. Efficient SF is achieved through a high degree of interchromophoric coupling that facilitates electron super-exchange to generate triplet pairs. Here we show that a predesigned chromophoric linker with extremely poor ISC efficiency (k_ISC) but form triplets in MOF in contrast to the frameworks that are built from linkers with sizable k_ISC but . This work opens a new photophysical and photochemical avenue in MOF chemistry and utility in energy conversion schemes.     

Decoupling Redox Hopping and Catalysis in Metal-Organic Frameworks -based Electrocatalytic CO2 Reduction

Traditional MOF e-CRR, constructed from catalytic linkers, manifest a kinetic bottleneck during their multi-electron activation. Decoupling catalysis and charge transport can address such issues. Here, we build two MOF/e-CRR systems, CoPc@NU-1000 and TPP(Co)@NU-1000, by installing cobalt metalated phthalocyanine and tetraphenylporphyrin electrocatalysts within the redox active NU-1000 MOF. For CoPc@NU-1000, the e-CRR responsive Co^I/0 potential is close to that of NU-1000 reduction compared to the TPP(Co)@NU-1000. Efficient charge delivery, defined by a higher diffusion (D_hop=4.1×10⁻¹² cm² s⁻¹) and low charge-transport resistance ( =59.5 Ω) in CoPC@NU-1000 led FE_CO=80 %. In contrast, TPP(Co)@NU-1000 fared a poor FE_CO=24 % (D_hop=1.4×10⁻¹² cm² s⁻¹ and =91.4 Ω). For such a decoupling strategy, careful choice of the host framework is critical in pairing up with the underlying electrochemical properties of the catalysts to facilitate the charge delivery for its activation.     

Metal Organic Framework Cubosomes

We demonstrate a general strategy for the synthesis of ordered bicontinuous-structured metal organic frameworks (MOFs) by using polymer cubosomes (PCs) with a double primitive structure (Im m symmetry) as the template. The filling of MOF precursors in the open channel of PCs, followed by their coordination and removal of the template, generates MOF cubosomes with a single primitive topology (Pm m) and average mesopore diameters of 60–65 nm. Mechanism study reveals that the formation of ZIF-8 cubosomes undergoes a new MOF growth process, which involves the formation of individual MOF seeds in the template, their growth and eventual fusion into the cubosomes. Their growth kinetics follows the Avrami equation with an Avrami exponent of n=3 and a growth rate of k=1.33×10⁻⁴, indicating their fast 3D heterogeneous growth mode. Serving as a bioreactor, the ZIF-8 cubosomes show high loading of trypsin enzyme, leading to a high catalytic activity in the proteolysis of bovine serum albumin.     

Inorganic Solid-State Nonlinear Optical Switch with a Linearly Tunable Tc Spanning a Wide Temperature Range

Nonlinear optical (NLO) switch materials that turn on/off second-harmonic generation (SHG) at a phase transition temperature (T_c) are promising for applications in the fields of photoswitching and optical computing. However, precise control of T_c remains challenging, mainly because a linearly tunable T_c has not been reported to date. Herein, we report a unique selenate, tetragonal P 2₁c [Ag(NH₃)₂]₂SeO₄ with a=b=8.5569(2) Å and c=6.5208(2) Å that exhibits a strong SHG intensity (1.3×KDP) and a large birefringence (Δn_obv.=0.08). This compound forms a series of isostructural solid-solution crystals [Ag(NH₃)₂]₂S_xSe_1−xO₄ (x=0–1.00) that exhibit excellent NLO switching performance and an unprecedented linearly tunable spanning 430 to 356 K. The breaking of localized hydrogen bonds between SeO₄²⁻ and the cation triggers a phase transition accompanied by hydrogen bond length changes with increasing x and a linear change in the enthalpy .     

Highly Selective Electrochemical Reduction of CO2 to Alcohols on an FeP Nanoarray

Electrochemical reduction of CO₂ into various chemicals and fuels provides an attractive pathway for environmental and energy sustainability. It is now shown that a FeP nanoarray on Ti mesh (FeP NA/TM) acts as an efficient 3D catalyst electrode for the CO₂ reduction reaction to convert CO₂ into alcohols with high selectivity. In 0.5 m KHCO₃, such FeP NA/TM is capable of achieving a high Faradaic efficiency (FE ) up to 80.2 %, with a total FE of 94.3 % at ?0.20 V vs. reversible hydrogen electrode. Density functional theory calculations reveal that the FeP(211) surface significantly promotes the adsorption and reduction of CO₂ toward CH₃OH owing to the synergistic effect of two adjacent Fe atoms, and the potential‐determining step is the hydrogenation process of *CO.     

Complexes Featuring a cis-[M U M] Core (M=Rh,Ir): A New Route to Uranium-Metal Multiple Bonds

Although examples of multiple bonds between actinide elements and main-group elements are quite common, studies of the multiple bonds between actinide elements and transition metals are extremely rare owing to difficulties associated with their synthesis. Here we report the first example of molecular uranium complexes featuring a cis-[M U M] core (M=Rh, Ir), which exhibits an unprecedented arrangement of two M U double dative bond linkages to a single U center. These complexes were prepared by the reactions of chlorine-bridged heterometallic complexes [{U{N(CH₃)(CH₂CH₂NPⁱPr₂)₂}(Cl)₂[(μ-Cl)M(COD)]₂}] (M=Rh, Ir) with MeMgBr or MeLi, a new method for the construction of species with U−M multiple bonds. Theoretical calculations including dispersion confirmed the presence of two U M double dative bonds in these complexes. This study not only enriches the U M multiple bond chemistry, but also provides a new opportunity to explore the bonding of actinide elements.     

An Artificial Single Molecular Channel Showing High Chloride Transport Selectivity and pH-Responsive Conductance

Inspired by the unique structure and function of the natural chloride channel (ClC) selectivity filter, we present herein the design of a ClC-type single channel molecule. This channel displays high ion transport activity with half-maximal effective concentration, EC₅₀, of 0.10 μM, or 0.075 mol % (channel molecule to lipid ratio), as determined by fluorescent analysis using lucigenin-encapsulated vesicles. Planar bilayer lipid membrane conductance measurements indicated an excellent Cl⁻/K⁺ selectivity with a permeability ratio P /P up to 12.31, which is comparable with the chloride selectivity of natural ClC proteins. Moreover, high anion/anion selectivity (P /P =66.21) and pH-dependent conductance and ion selectivity of the channel molecule were revealed. The ClC-like transport behavior is contributed by the cooperation of hydrogen bonding and anion–π interactions in the central macrocyclic skeleton, and by the existence of pH-responsive terminal phenylalanine residues.     

Isolation of a Perfectly Linear Uranium(II) Metallocene

Reduction of the uranium(III) metallocene [(η⁵‐C₅ⁱPr₅)₂UI] ( 1 ) with potassium graphite produces the “second‐generation” uranocene [(η⁵‐C₅ⁱPr₅)₂U] ( 2 ), which contains uranium in the formal divalent oxidation state. The geometry of 2 is that of a perfectly linear bis(cyclopentadienyl) sandwich complex, with the ground‐state valence electron configuration of uranium(II) revealed by electronic spectroscopy and density functional theory to be 5f³ 6d¹. Appreciable covalent contributions to the metal‐ligand bonds were determined from a computational study of 2 , including participation from the uranium 5f and 6d orbitals. Whereas three unpaired electrons in 2 occupy orbitals with essentially pure 5f character, the fourth electron resides in an orbital defined by strong 7s‐6d mixing.     

CO2‐Induced Spin‐State Switching at Room Temperature in a Monomeric Cobalt(II) Complex with the Porous Nature

CO₂‐responsive spin‐state conversion between high‐spin (HS) and low‐spin (LS) states at room temperature was achieved in a monomeric cobalt(II) complex. A neutral cobalt(II) complex, [Co^II(COO‐terpy)₂]?4 H₂O ( 1?4 H₂O ), stably formed cavities generated via π–π stacking motifs and hydrogen bond networks, resulting in the accommodation of four water molecules. Crystalline 1?4 H₂O transformed to solvent‐free 1 without loss of porosity by heating to 420 K. Compound 1 exhibited a selective CO₂ adsorption via a gate‐open type of the structural modification. Furthermore, the HS/LS transition temperature (T_1/2) was able to be tuned by the CO₂ pressure over a wide temperature range. Unlike 1 exhibits the HS state at 290 K, the CO₂‐accomodated form 1?CO₂ (P =110 kPa) was stabilized in the LS state at 290 K, probably caused by a chemical pressure effect by CO₂ accommodation, which provides reversible spin‐state conversion by introducing/evacuating CO₂ gas into/from 1 .     

The Origin of Solvent Deprotonation in LiI-added Aprotic Electrolytes for Li-O2 Batteries

LiI and LiBr have been employed as soluble redox mediators (RMs) in electrolytes to address the sluggish oxygen evolution reaction kinetics during charging in aprotic Li-O₂ batteries. Compared to LiBr, LiI exhibits a redox potential closer to the theoretical one of discharge products, indicating a higher energy efficiency. However, the reason for the occurrence of solvent deprotonation in LiI-added electrolytes remains unclear. Here, by combining ab initio calculations and experimental validation, we find that it is the nucleophile that triggers the solvent deprotonation and LiOH formation via nucleophilic attack, rather than the increased solvent acidity or the elongated C−H bond as previously suggested. As a comparison, the formation of in LiBr-added electrolytes is found to be thermodynamically unfavorable, explaining the absence of LiOH formation. These findings provide important insight into the solvent deprotonation and pave the way for the practical application of LiI RM in aprotic Li-O₂ batteries.     

Harnessing Plasticity in an Amine‐Borane as a Piezoelectric and Pyroelectric Flexible Film

We demonstrate that trimethylamine borane can exhibit desirable piezoelectric and pyroelectric properties. The material was shown to be able operate as a flexible film for both thermal sensing, thermal energy conversion and mechanical sensing with high open circuit voltages (>10 V). A piezoelectric coefficient of d₃₃≈10–16 pC N^?1, and pyroelectric coefficient of p≈25.8 μC m^?2 K^?1 were achieved after poling, with high pyroelectric figure of merits for sensing and harvesting, along with a relative permittivity of 6.3.     

Broad Dual Emission by Codoping Cr3+ (d→d) and Bi3+ (s→p) in Cs2Ag0.6Na0.4InCl6 Double Perovskite

A phosphor emitting both white light and broad near-infrared (NIR) radiation can simultaneously provide visual inspection and early signs of rotting of food products. The broad NIR emission is absorbed by the vibrational overtones of water molecules present in food items, providing the non-invasive image contrast to assess the food freshness. Here we design a phosphor, namely, Cr³⁺-Bi³⁺-codoped Cs₂Ag_0.6Na_0.4InCl₆, that simultaneously emit warm white light and broad NIR (1000 nm) radiation with quantum yield 27 %. This dual emitter is designed by combining the features of s²-electron (Bi³⁺) and d³-electron (Cr³⁺) doping in a weak crystal field of the halide perovskite host. excitation of Bi³⁺, using a commercial 370 nm ultraviolet light-emitting-diodes (UV-LED), yields both the emissions. A fraction of the excited Bi³⁺ dopants emit the warm white light, and the other fraction transfers its energy non-radiatively to Cr³⁺. Then the Cr³⁺ de-excites emitting broad NIR emission. Temperature dependent (6.4–300 K) photoluminescence in combination with Tanabe-Sugano diagram show that the Cr³⁺ experiences a weak crystal field ( =2.2), yielding the NIR emission. As a proof of concept, we fabricated a panel containing 122 phosphor-converted LEDs, demonstrating its capability to inspect food products.     

Supramolecular Barrel-Rosette Ion Channel Based on 3,5-Diaminobenzoic Acid for Cation-Anion Symport

The structural tropology and functions of natural cation-anion symporting channels have been continuously investigated due to their crucial role in regulating various physiological functions. To understand the physiological functions of the natural symporter channels, it is vital to develop small-molecule-based biomimicking systems that can provide mechanistic insights into the ion-binding sites and the ion-translocation pathways. Herein, we report a series of bis((R)-(−)-mandelic acid)-linked 3,5-diaminobenzoic acid based self-assembled ion channels with distinctive ion transport ability. Ion transport experiment across the lipid bilayer membrane revealed that compound 1 b exhibits the highest transport activity among the series, and it has interesting selective co-transporting functions, i.e., facilitates K⁺/ClO₄⁻ symport. Electrophysiology experiments confirmed the formation of supramolecular ion channels with an average diameter of 6.2±1 Å and single channel conductance of 57.3±1.9 pS. Selectivity studies of channel 1 b in a bilayer lipid membrane demonstrated a permeability ratio of , , and indicating the higher selectivity of the channel towards KClO₄ over KCl salt. A hexameric assembly of a trimeric rosette of 1 b was subjected to molecular dynamics simulations with different salts to understand the supramolecular channel formation and ion selectivity pattern.     

Linear Adsorption Enables NO Selective Electroreduction to Hydroxylamine on Single Co Sites

Hydroxylamine (NH₂OH), a vital industrial feedstock, is presently synthesized under harsh conditions with serious environmental and energy concerns. Electrocatalytic nitric oxide (NO) reduction is attractive for the production of hydroxylamine under ambient conditions. However, hydroxylamine selectivity is limited by the competitive reaction of ammonia production. Herein, we regulate the adsorption configuration of NO by adjusting the atomic structure of catalysts to control the product selectivity. Co single-atom catalysts show state-of-the-art NH₂OH selectivity from NO electroreduction under neutral conditions (FE : 81.3 %), while Co nanoparticles are inclined to generate ammonia (FE : 92.3 %). A series of in situ characterizations and theoretical simulations unveil that linear adsorption of NO on isolated Co sites enables hydroxylamine formation and bridge adsorption of NO on adjacent Co sites induces the production of ammonia.     

A Long Cycle‐Life High‐Voltage Spinel Lithium‐Ion Battery Electrode Achieved by Site‐Selective Doping

Spinel LiNi_0.5Mn_1.5O₄ (LNMO) is a promising cathode candidate for the next‐generation high energy‐density lithium‐ion batteries (LIBs). Unfortunately, the application of LNMO is hindered by its poor cycle stability. Now, site‐selectively doped LNMO electrode is prepared with exceptional durability. In this work, Mg is selectively doped onto both tetrahedral (8a) and octahedral (16c) sites in the Fd m structure. This site‐selective doping not only suppresses unfavorable two‐phase reactions and stabilizes the LNMO structure against structural deformation, but also mitigates the dissolution of Mn during cycling. Mg‐doped LNMOs exhibit extraordinarily stable electrochemical performance in both half‐cells and prototype full‐batteries with novel TiNb₂O₇ counter‐electrodes. This work pioneers an atomic‐doping engineering strategy for electrode materials that could be extended to other energy materials to create high‐performance devices.     

Electrothermal Water-Gas Shift Reaction at Room Temperature with a Silicomolybdate-Based Palladium Single-Atom Catalyst

The water-gas shift (WGS) reaction is often conducted at elevated temperature and requires energy-intensive separation of hydrogen (H₂) from methane (CH₄), carbon dioxide (CO₂), and residual carbon monoxide (CO). Designing processes to decouple CO oxidation and H₂ production provides an alternative strategy to obtain high-purity H₂ streams. We report an electrothermal WGS process combining thermal oxidation of CO on a silicomolybdic acid (SMA)-supported Pd single-atom catalyst (Pd₁/CsSMA) and electrocatalytic H₂ evolution. The two half-reactions are coupled through phosphomolybdic acid (PMA) as a redox mediator at a moderate anodic potential of 0.6 V (versus Ag/AgCl). Under optimized conditions, our catalyst exhibited a TOF of 1.2 s⁻¹ with turnover numbers above 40 000 mol mol_Pd⁻¹ achieving stable H₂ production with a purity consistently exceeding 99.99 %.     

Quantum Nuclear Delocalization and its Rovibrational Fingerprints

Quantum mechanics dictates that nuclei must undergo some delocalization. In this work, emergence of quantum nuclear delocalization and its rovibrational fingerprints are discussed for the case of the van der Waals complex . The equilibrium structure of is planar and T-shaped, one He atom solvating the quasi-linear He−H⁺−He core. The dynamical structure of , in all of its bound states, is fundamentally different. As revealed by spatial distribution functions and nuclear densities, during the vibrations of the molecule the solvating He is not restricted to be in the plane defined by the instantaneously bent chomophore, but freely orbits the central proton, forming a three-dimensional torus around the chromophore. This quantum delocalization is observed for all vibrational states, the type of vibrational excitation being reflected in the topology of the nodal surfaces in the nuclear densities, showing, for example, that intramolecular bending involves excitation along the circumference of the torus.     

Hole and Electron Doping of the 4d Transition‐Metal Oxyhydride LaSr3NiRuO4H4

Hole or electron doping of phases prepared by topochemical reactions (e.g. anion deintercalation or anion‐exchange) is extremely challenging as these low‐temperature conversion reactions are typically very sensitive to the electron counts of precursor phases. Herein we report the successful hole and electron doping of the transition‐metal oxyhydride LaSr₃NiRuO₄H₄ by first preparing precursors in the range La_xSr_4?xNiRuO₈ 0.5<x<1.4 and then converting into the corresponding La_xSr_4?xNiRuO₄H₄ phases. This is particularly noteworthy as the (Ni/Ru)H₂ sheets in the La_xSr_4?xNiRuO₄H₄ phases are structurally analogous to the CuO₂ sheets in cuprate superconductors and hole doping (Ni^1+/2+, Ru²⁺) or electron doping (Ni²⁺, Ru^1+/2+) yields materials with partial occupancy in Ni/Ru –H 1s bands which are analogous to the partially occupied Cu –O 2p bands present in the CuO₂ sheets of doped superconducting cuprates.