Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes

Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)-ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA-ZnAl layer can manipulate Zn²⁺ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite-free morphology. Moreover, the robust PA-ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA-ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn²⁺ transference number compared with bare Zn. The Zn@PA-ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm⁻² and 5 mAh cm⁻². Furthermore, the assembled Zn battery full cell based on this Zn@PA-ZnAl anode also delivers decent cycling stability even under harsh conditions.     

Polycation-Regulated Electrolyte and Interfacial Electric Fields for Stable Zinc Metal Batteries

Zn metal as one of promising anode materials for aqueous batteries but suffers from disreputable dendrite growth, grievous hydrogen evolution and corrosion. Here, a polycation additive, polydiallyl dimethylammonium chloride (PDD), is introduced to achieve long-term and highly reversible Zn plating/stripping. Specifically, the PDD can simultaneously regulate the electric fields of electrolyte and Zn/electrolyte interface to improve Zn²⁺ migration behaviors and guide dominant Zn (002) deposition, which is veritably detected by Zeta potential, Kelvin probe force microscopy and scanning electrochemical microscopy. Moreover, PDD also creates a positive charge-rich protective outer layer and a N-rich hybrid inner layer, which accelerates the Zn²⁺ desolvation during plating process and blocks the direct contact between water molecules and Zn anode. Thereby, the reversibility and long-term stability of Zn anodes are substantially improved, as certified by a higher average coulombic efficiency of 99.7 % for Zn||Cu cells and 22 times longer life for Zn||Zn cells compared with that of PDD-free electrolyte.     

Synchronous Dual Electrolyte Additive Sustains Zn Metal Anode with 5600 h Lifespan

Despite conspicuous merits of Zn metal anodes, the commercialization is still handicapped by rampant dendrite formation and notorious side reaction. Manipulating the nucleation mode and deposition orientation of Zn is a key to rendering stabilized Zn anodes. Here, a dual electrolyte additive strategy is put forward via the direct cooperation of xylitol (XY) and graphene oxide (GO) species into typical zinc sulfate electrolyte. As verified by molecular dynamics simulations, the incorporated XY molecules could regulate the solvation structure of Zn²⁺, thus inhibiting hydrogen evolution and side reactions. The self-assembled GO layer is in favor of facilitating the desolvation process to accelerate reaction kinetics. Progressive nucleation and orientational deposition can be realized under the synergistic modulation, enabling a dense and uniform Zn deposition. Consequently, symmetric cell based on dual additives harvests a highly reversible cycling of 5600 h at 1.0 mA cm⁻²/1.0 mAh cm⁻².     

Bio-Inspired Polyanionic Electrolytes for Highly Stable Zinc-Ion Batteries

For zinc-ion batteries (ZIBs), the non-uniform Zn plating/stripping results in a high polarization and low Coulombic efficiency (CE), hindering the large-scale application of ZIBs. Here, inspired by biomass seaweed plants, an anionic polyelectrolyte alginate acid (SA) was used to initiate the in situ formation of the high-performance solid electrolyte interphase (SEI) layer on the Zn anode. Attribute to the anionic groups of −COO⁻, the affinity of Zn²⁺ ions to alginate acid induces a well-aligned accelerating channel for uniform plating. This SEI regulates the desolvation structure of Zn²⁺ and facilitates the formation of compact Zn (002) crystal planes. Even under high depth of discharge conditions (DOD), the SA-coated Zn anode still maintains a stable Zn stripping/plating behavior with a low potential difference (0.114 V). According to the classical nucleation theory, the nucleation energy for SA-coated Zn is 97 % less than that of bare Zn, resulting in a faster nucleation rate. The Zn||Cu cell assembled with the SA-coated electrode exhibits an outstanding average CE of 99.8 % over 1,400 cycles. The design is successfully demonstrated in pouch cells, where the SA-coated Zn exhibits capacity retention of 96.9 % compared to 59.1 % for bare Zn anode, even under the high cathode mass loading (>10 mg/cm²).     

Modulating Cation Migration and Deposition with Xylitol Additive and Oriented Reconstruction of Hydrogen Bonds for Stable Zinc Anodes

Highly reversible plating/stripping in aqueous electrolytes is one of the critical processes determining the performance of Zn-ion batteries, but it is severely impeded by the parasitic side reaction and dendrite growth. Herein, a novel electrolyte engineering strategy is first proposed based on the usage of 100 mM xylitol additive, which inhibits hydrogen evolution reaction and accelerates cations migration by expelling active H₂O molecules and weakening electrostatic interaction through oriented reconstruction of hydrogen bonds. Concomitantly, xylitol molecules are preferentially adsorbed by Zn surface, which provides a shielding buffer layer to retard the sedimentation and suppress the planar diffusion of Zn²⁺ ions. Zn²⁺ transference number and cycling lifespan of Zn ∥ Zn cells have been significantly elevated, overwhelmingly larger than bare ZnSO₄. The cell coupled with a NaV₃O₈ cathode still behaves much better than the additive-free device in terms of capacity retention.     

Improved Interfacial Ion Migration and Deposition through the Chain-Liquid Synergistic Effect by a Carboxylated Hydrogel Electrolyte for Stable Zinc Metal Anodes

The large-scale applicability of Zn-metal anodes is severely impeded by the issues such as the dendrite growth, complicated hydrogen evolution, and uncontrollable passivation reaction. Herein, a negatively charged carboxylated double-network hydrogel electrolyte (Gelatin/Sodium alginate-acetate, denoted as Gel/SA-acetate) has been developed to stabilize the interfacial electrochemistry, which restructures a type of Zn²⁺ ion solvent sheath optimized via a chain-liquid synergistic effect. New hydrogen bonds are reconstructed with water molecules by the zincophilic functional groups, and directional migration of hydrated Zn²⁺ ions is therefore induced. Concomitantly, the robust chemical bonding of such hydrogel layers to the Zn slab exhibits a desirable anti-catalytic effect, thereby greatly diminishing the water activity and eliminating side reactions. Subsequently, a symmetric cell using the Gel/SA-acetate electrolyte demonstrates a reversible plating/stripping performance for 1580 h, and an asymmetric cell reaches a state-of-the-art runtime of 5600 h with a high average Coulombic efficiency of 99.9 %. The resultant zinc ion hybrid capacitors deliver exceptional properties including the capacity retention of 98.5 % over 15000 cycles, energy density of 236.8 Wh kg⁻¹, and high mechanical adaptability. This work is expected to pave a new avenue for the development of novel hydrogel electrolytes towards safe and stable Zn anodes.     

Electrical-Conductive/Insulating Bi-Functional Layers for Stable Zn Metal Anode

Zinc-ion batteries are regarded as an extremely promising candidate for large-scale energy storage equipment due to the inexpensive ingredients and high safety. However, dendrite growth and side reactions occur in the Zn anode, which lead to exceedingly low coulombic efficiency (CE) and poor cycling stability. In this work, we propose a strategy of a conductive/insulating bi-functional coating layer (CIBL) for stable Zn metal anodes. Porous Ag nanowires (NWs) coating as a conductive layer effectively reduces the nuclear barrier and contains Zn²⁺ deposition in a certain space. Polyimide (PI) coatings as insulating layer implement a shunting effect on Zn²⁺, which could reduce the differential concentration on the Zn surface and induce uniform deposition of Zn²⁺. Therefore, the CIBL−Zn//CIBL−Zn battery achieves stable plating/stripping of over 1300 h at 1 mA cm⁻². The CE of CIBL−Zn//CIBL−Zn battery maintains at 99.2 % even after 1000 cycles. Moreover, the CIBL−Zn//V₂O₅ battery exhibits a capacity of nearly 289.2 mA h g⁻¹ at 5 A g⁻¹ after 3000 cycles and no sign of capacity degradation is found, which further demonstrate the feasibility of this strategy in practical application.     

Revisiting the Electroplating Process for Lithium-Metal Anodes for Lithium-Metal Batteries

Electroplating has been studied for centuries, not only in the laboratory but also in industry for machinery, electronics, automobile, aviation, and other fields. The lithium-metal anode is the Holy Grail electrode because of its high energy density. But the recyclability of lithium-metal batteries remains quite challenging. The essence of both conventional electroplating and lithium plating is the same, reduction of metal cations. Thus, industrial electroplating knowledge can be applied to revisit the electroplating process for lithium-metal anodes. In conventional electroplating, some strategies like using additives, modifying substrates, applying pulse current, and agitating electrolyte have been explored to suppress dendrite growth. These methods are also effective in lithium-metal anodes. Inspired by that, we revisit the fundamental electroplating theory for lithium-metal anodes in this Minireview, mainly drawing attention to the theory of electroplating thermodynamics and kinetics. Analysis of essential differences between traditional electroplating and plating/stripping of lithium-metal anodes is also presented. Thus, industrial electroplating knowledge can be applied to the electroplating process of lithium-metal anodes to improve commercial lithium-metal batteries and the study of lithium plating/stripping can further enrich the classical electroplating technique.     

Regulating Lithium Plating and Stripping by Using Vertically Aligned Graphene/CNT Channels Decorated with ZnO Particles

Lithium (Li) metal is regarded as the ultimate anode material for use in Li batteries due to its high theoretical capacity (3860 mA h g⁻¹). However, the Li dendrites that are generated during iterative Li plating/stripping cycles cause poor cycling stability and even present safety risks, and thus severely handicap the commercial utility of Li metal anodes. Herein, we describe a graphene and carbon nanotube (CNT)-based Li host material that features vertically aligned channels with attached ZnO particles (designated ZnO@G-CNT-C) and show that the material effectively regulates Li plating and stripping. ZnO@G-CNT-C is prepared from an aqueous suspension of Zn(OAc)₂, CNTs, and graphene oxide by using ice to template channel growth. ZnO@G-CNT-C was found to be mechanically robust and capable of guiding Li deposition on the inner walls of the channels without the formation of Li dendrites. When used as an electrode, the material exhibits relatively low polarization for Li plating, fast Li-ion diffusion, and high Coulombic efficiency, even over hundreds of Li plating/stripping cycles. Moreover, full cells prepared with ZnO@G-CNT-C as Li host and LiFePO₄ as cathode exhibit outstanding performance in terms of specific capacity (155.9 mA h g⁻¹ at 0.5 C), rate performance (91.8 mA h g⁻¹ at 4 C), cycling stability (109.4 mA h g⁻¹ at 0.5 C after 800 cycles). The methodology described can be readily adapted to enable the use of carbon-based electrodes with well-defined channels in a wide range of contemporary applications that pertain to energy storage and delivery.     

Highly Reversible Zinc Metal Anode in a Dilute Aqueous Electrolyte Enabled by a pH Buffer Additive

Aqueous zinc-ion batteries have drawn increasing attention due to the intrinsic safety, cost-effectiveness and high energy density. However, parasitic reactions and non-uniform dendrite growth on the Zn anode side impede their application. Herein, a multifunctional additive, ammonium dihydrogen phosphate (NHP), is introduced to regulate uniform zinc deposition and to suppress side reactions. The results show that the NH₄⁺ tends to be preferably absorbed on the Zn surface to form a “shielding effect” and blocks the direct contact of water with Zn. Moreover, NH₄⁺ and (H₂PO₄)⁻ jointly maintain pH values of the electrode-electrolyte interface. Consequently, the NHP additive enables highly reversible Zn plating/stripping behaviors in Zn//Zn and Zn//Cu cells. Furthermore, the electrochemical performances of Zn//MnO₂ full cells and Zn//active carbon (AC) capacitors are improved. This work provides an efficient and general strategy for modifying Zn plating/stripping behaviors and suppressing side reactions in mild aqueous electrolyte.     

Anti-corrosive Hybrid Electrolytes for Rechargeable Aqueous Zinc Batteries

Aqueous zinc(Zn)-metal cells with cost-effective components and high safety have long been a promising large-scale energy storage system,but Zn anodes are intrinsically unstable with common aqueous electrolytes,causing substantial underutilization of the theoretical capacity.In this work,we report a strictly neutral aqueous Zn electrolyte at a low cost by leveraging the dynamic hydrolysis equilibrium of a dual-salt Zn(Ac)2/NaAc(Ac:CH3COO?)formulation.With the pH regulation,the corrosion and hydrogen evolution encountered in Zn anodes can be suppressed significantly.This hybrid aqueous electrolyte not only enables dendrite-free Zn plating/stripping at a nearly 95%Coulombic efficiency[an increase of 24%compared to that of the single-salt 1 mol/L Zn(Ac)2 electrolyte],but also supports the reversible operation of Zn cells paired with either Na3V2(PO4)3 or iodine cathodes—the former delivers a high output voltage of 1.55 V with an energy level of 99.5 W·h/kg(based on the mass of the cathode),and the latter possesses a high specific capacity of 110.9 mA·h/g while yielding long-term cyclability(thousands of cycles).These findings open up a new avenue of modifying practical electrolytes having targeted properties to stabilize multivalent metal anodes.     

Revisiting the Electroplating Process for Lithium‐Metal Anodes for Lithium‐Metal Batteries

Electroplating has been studied for centuries, not only in the laboratory but also in industry for machinery, electronics, automobile, aviation, and other fields. The lithium‐metal anode is the Holy Grail electrode because of its high energy density. But the recyclability of lithium‐metal batteries remains quite challenging. The essence of both conventional electroplating and lithium plating is the same, reduction of metal cations. Thus, industrial electroplating knowledge can be applied to revisit the electroplating process for lithium‐metal anodes. In conventional electroplating, some strategies like using additives, modifying substrates, applying pulse current, and agitating electrolyte have been explored to suppress dendrite growth. These methods are also effective in lithium‐metal anodes. Inspired by that, we revisit the fundamental electroplating theory for lithium‐metal anodes in this Minireview, mainly drawing attention to the theory of electroplating thermodynamics and kinetics. Analysis of essential differences between traditional electroplating and plating/stripping of lithium‐metal anodes is also presented. Thus, industrial electroplating knowledge can be applied to the electroplating process of lithium‐metal anodes to improve commercial lithium‐metal batteries and the study of lithium plating/stripping can further enrich the classical electroplating technique.     

Inorganic–Organic Hybrid Multifunctional Solid Electrolyte Interphase Layers for Dendrite-Free Sodium Metal Anodes

Constructing a stable and robust solid electrolyte interphase (SEI) is crucial for achieving dendrite-free sodium metal anodes and high-performance sodium batteries. However, maintaining the integrity of SEI during prolonged cycle life under high current densities poses a significant challenge. In this study, we propose an integrated multifunctional SEI layer with inorganic/organic hybrid construction (IOHL−Na) to enhance the durability of sodium metal anode during reduplicative plating/stripping processes. The inorganic components with high mechanical strength and strong sodiophilicity demonstrate optimized ionic conduction efficiency and dendrite inhibition ability. Simultaneously, the organic component contributes to the formation of a dense and elastic membrane structure, preventing fracture and delamination issues during volume fluctuations. The symmetrical batteries of IOHL−Na achieve stable cycling over 2000 hours with an extremely low voltage hysteresis of around 15.8 mV at a high current density of 4 mA cm⁻². Moreover, the Na−O₂ batteries sustain exceptional long-term stability and impressive capacity retention, exploiting a promising approach for constructing durable SEI and dendrite-free sodium metal anodes.     

Non-concentrated aqueous electrolytes with organic solvent additives for stable zinc batteries

Rechargeable aqueous zinc batteries (RAZBs) are promising for large-scale energy storage because of their superiority in addressing cost and safety concerns. However, their practical realization is hampered by issues including dendrite growth, poor reversibility and low coulombic efficiency (CE) of Zn anodes due to parasitic reactions. Here, we report a non-concentrated aqueous electrolyte composed of 2 m zinc trifluoromethanesulfonate (Zn(OTf)₂) and the organic dimethyl carbonate (DMC) additive to stabilize the Zn electrochemistry. Unlike the case in conventional aqueous electrolytes featuring typical Zn[H₂O]₆²⁺ solvation, a solvation sheath of Zn²⁺ with the co-participation of the DMC solvent and OTf⁻ anion is found in the formulated H₂O + DMC electrolyte, which contributes to the formation of a robust ZnF₂ and ZnCO₃-rich interphase on Zn. The resultant Zn anode exhibits a high average CE of Zn plating/stripping (99.8% at an areal capacity of 2.5 mA h cm⁻²) and dendrite-free cycling over 1000 cycles. Furthermore, the H₂O + DMC electrolytes sustain stable operation of RAZBs pairing Zn anodes with diverse cathode materials such as vanadium pentoxide, manganese dioxide, and zinc hexacyanoferrate. Rational electrolyte design with organic solvent additives would promote building better aqueous batteries.

Involvement of dimethyl carbonate and trifluoromethanesulfonate anions in a hybrid aqueous electrolyte enables the formation of a new Zn²⁺-solvation structure and a ZnF₂–ZnCO₃-rich interphase that stabilizes the Zn battery chemistry.     

The Three‐Dimensional Dendrite‐Free Zinc Anode on a Copper Mesh with a Zinc‐Oriented Polyacrylamide Electrolyte Additive

Rechargeable aqueous zinc‐ion batteries have been considered as a promising candidate for next‐generation batteries. However, the formation of zinc dendrites are the most severe problems limiting their practical applications. To develop stable zinc metal anodes, a synergistic method is presented that combines the Cu‐Zn solid solution interface on a copper mesh skeleton with good zinc affinity and a polyacrylamide electrolyte additive to modify the zinc anode, which can greatly reduce the overpotential of the zinc nucleation and increase the stability of zinc deposition. The as‐prepared zinc anodes show a dendrite‐free plating/stripping behavior over a wide range of current densities. The symmetric cell using this dendrite‐free anode can be cycled for more than 280 h with a very low voltage hysteresis (93.1 mV) at a discharge depth of 80 %. The high capacity retention and low polarization are also realized in Zn/MnO₂ full cells.     

Double‐Shelled C@MoS2 Structures Preloaded with Sulfur: An Additive Reservoir for Stable Lithium Metal Anodes

The growth of Li dendrites hinders the practical application of lithium metal anodes (LMAs). In this work, a hollow nanostructure, based on hierarchical MoS₂ coated hollow carbon particles preloaded with sulfur (C@MoS₂/S), was designed to modify the LMA. The C@MoS₂ hollow nanostructures serve as a good scaffold for repeated Li plating/stripping. More importantly, the encapsulated sulfur could gradually release lithium polysulfides during the Li plating/stripping, acting as an effective additive to promote the formation of a mosaic solid electrolyte interphase layer embedded with crystalline hybrid lithium‐based components. These two factors together effectively suppress the growth of Li dendrites. The as‐modified LMA shows a high Coulombic efficiency of 98 % over 500 cycles at the current density of 1 mA cm^?2. When matched with a LiFePO₄ cathode, the assembled full cell displays a highly improved cycle life of 300 cycles, implying the feasibility of the proposed LMA.     

Highly Reversible and Rechargeable Safe Zn Batteries Based on a Triethyl Phosphate Electrolyte

Zinc metal is an attractive anode material for next‐generation batteries. However, dendrite growth and limited Coulombic efficiency (CE) during cycling are the major roadblocks towards the widespread commercialization of batteries employing Zn anodes. In this work we report the novel adoption of triethyl phosphate (TEP) as a solvent and co‐solvent with aqueous electrolytes to obtain a highly stable and dendrite‐free Zn anode. Stable Zn plating/stripping for over 3000 h was obtained, accompanied by a CE of 99.68 %. SEM images of the Zn anodes revealed highly porous interconnected dendrite‐free Zn deposits. The electrolyte displayed good compatibility with both Zn anodes and potassium copper hexacyanoferrate (KCuHCf) cathodes for Zn ion batteries (ZIBs). The full cell showed a long cycling stability and high rate capability. The present work is a contribution towards cost‐effective and safe battery systems.     

Double-Shelled C@MoS2 Structures Preloaded with Sulfur: An Additive Reservoir for Stable Lithium Metal Anodes

The growth of Li dendrites hinders the practical application of lithium metal anodes (LMAs). In this work, a hollow nanostructure, based on hierarchical MoS₂ coated hollow carbon particles preloaded with sulfur (C@MoS₂/S), was designed to modify the LMA. The C@MoS₂ hollow nanostructures serve as a good scaffold for repeated Li plating/stripping. More importantly, the encapsulated sulfur could gradually release lithium polysulfides during the Li plating/stripping, acting as an effective additive to promote the formation of a mosaic solid electrolyte interphase layer embedded with crystalline hybrid lithium-based components. These two factors together effectively suppress the growth of Li dendrites. The as-modified LMA shows a high Coulombic efficiency of 98 % over 500 cycles at the current density of 1 mA cm⁻². When matched with a LiFePO₄ cathode, the assembled full cell displays a highly improved cycle life of 300 cycles, implying the feasibility of the proposed LMA.     

Intrinsically zincophobic protective layer for dendrite-free zinc metal anode

Aqueous zinc anodes have attracted the attention of many researchers owing to their high safety, low cost, and high theoretical specific capacity. However, its practical application is severely limited by the dendrite growth on zinc anode. Herein, we develop an intrinsically zincophobic barium-titanate protective layer with a porous structure to suppress the zinc dendrite formation by homogenizing the ion distribution on the anode surface, increasing the nucleation sites, and limiting the irregu...     

Anode-Free Lithium Metal Batteries Based on an Ultrathin and Respirable Interphase Layer

Anode-free lithium (Li) metal batteries are desirable candidates in pursuit of high-energy-density batteries. However, their poor cycling performances originated from the unsatisfactory reversibility of Li plating/stripping remains a grand challenge. Here we show a facile and scalable approach to produce high-performing anode-free Li metal batteries using a bioinspired and ultrathin (250 nm) interphase layer comprised of triethylamine germanate. The derived tertiary amine and Li_xGe alloy showed enhanced adsorption energy that significantly promoted Li-ion adsorption, nucleation and deposition, contributing to a reversible expansion/shrinkage process upon Li plating/stripping. Impressive Li plating/stripping Coulombic efficiencies (CEs) of ≈99.3 % were achieved for 250 cycles in Li/Cu cells. In addition, the anode-free LiFePO₄ full batteries demonstrated maximal energy and power densities of 527 Wh kg⁻¹ and 1554 W kg⁻¹, respectively, and remarkable cycling stability (over 250 cycles with an average CE of 99.4 %) at a practical areal capacity of ≈3 mAh cm⁻², the highest among state-of-the-art anode-free LiFePO₄ batteries. Our ultrathin and respirable interphase layer presents a promising way to fully unlock large-scale production of anode-free batteries.