Low-Cost Hydroxyacid Potassium Synergists as an Efficient In Situ Defect Passivator for High Performance Tin-Oxide-Based Perovskite Solar Cells

Perovskite solar cells (PSCs) based on SnO₂ electron transport layers have attracted extensive research due to their compelling photovoltaic performance. Herein, we presented an in situ passivation of SnO₂ with low-cost hydroxyacid potassium synergist during deposition to optimize the interface carrier extraction and transport for high power conversion efficiency (PCE) and stabilities of PSCs. The orbital overlap of the carboxyl oxygen with the Sn atom alongwith the homogenous nano-particle deposition effectively suppresses the interfacial defects and releases the internal residual strains in the perovskite. Accordingly, a PCE of 24.91 % with a fill factor (FF) up to 0.852 is obtained for in situ passivated devices, which is one of the highest values for SnO₂-based PSCs. Moreover, the unencapsulated device maintained 80 % of its initial PCE at 80 °C over 600 h, 100 % PCE at ambient conditions for 1300 h, and 98 % after one week maximum power point tracking (MPPT) under continuous AM1.5G illumination.     

Crystallization Regulation by Self-Assembling Liquid Crystal Template Enables Efficient and Stable Perovskite Solar Cells

It is found that the disordered growth of bottom perovskite film deteriorates the buried interface of perovskite solar cells (PSCs), so developing a new material to modify the buried interface for regulating the crystal growth and defect passivation is an effective approach for improving the photovoltaic performance of PSCs. Here, we developed a new ionic liquid crystal (ILC, 1-Dodecyl-3-methylimidazolium tetrafluoroborate) as both crystal regulator and defect passivator to modify the buried interface of PSCs. The high lattice matching between this ILC and perovskite promotes preferential growth of perovskite film along [001] direction, while the oriented ILC with mesomorphic phase has a strong chemical interaction with perovskite to passivate the interface defect, as a result, the modified buried interface exhibits suppressed defects, improved band alignment, reduced nonradiative recombination losses, and enhanced charge extraction. The ILC-modified PSC delivers a power conversion efficiency of 24.92 % and maintains 94 % of the original value after storage in ambient for 3000 h.     

Enhanced Lifetime and Photostability with Low‐Temperature Mesoporous ZnTiO3/Compact SnO2 Electrodes in Perovskite Solar Cells

Perovskite solar cells (PSCs) with power conversion efficiencies (PCEs) of 25 % mainly have SnO₂ or TiO₂ as electron‐transporting layers (ETLs). Now, zinc titanate (ZnTiO₃, ZTO) is proposed as mesoporous ETLs owing to its weak photo‐effect, excellent carrier extraction, and transfer properties. Uniform mesoporous films were obtained by spinning coating the ZTO ink and annealed below 150 °C. Photovoltaic devices based on Cs_0.05FA_0.81MA_0.14PbI_2.55B_r0.45 perovskite sandwiched between SnO₂‐mesorporous ZTO electrode and Spiro‐OMeTAD layer achieved the PCE of 20.5 %. The PSCs retained more than 95 % of their original efficiency after 100 days lifetime test without being encapsulated. Additionally, the PSCs retained over 95 % of the initial performance when subjected at the maximum power point voltage for 120 h under AM 1.5 G illumination (100 mW cm^?2), demonstrating superior working stability. The application of ZTO provides a better choice for ETLs of PSCs.     

Manipulation of the Buried Interface for Robust Formamidinium-based Sn−Pb Perovskite Solar Cells with NiOx Hole-Transport Layers

Low band gap tin-lead perovskite solar cells (Sn−Pb PSCs) are expected to achieve higher efficiencies than Pb-PSCs and regarded as key components of tandem PSCs. However, the realization of high efficiency is challenged by the instability of Sn²⁺ and the imperfections at the charge transfer interfaces. Here, we demonstrate an efficient ideal band gap formamidinium (FA)-based Sn−Pb (FAPb_0.5Sn_0.5I₃) PSC, by manipulating the buried NiO_x/perovskite interface with 4-hydroxyphenethyl ammonium halide (OH-PEAX, X=Cl⁻, Br⁻, or I⁻) interlayer, which exhibits fascinating functions of reducing the surface defects of the NiO_x hole transport layer (HTL), enhancing the perovskite film quality, and improving both the energy level matching and physical contact at the interface. The effects of different halide anions have been elaborated and a 20.53 % efficiency is obtained with OH-PEABr, which is the highest one for FA-based Sn−Pb PSCs using NiO_x HTLs. Moreover, the device stability is also boosted.     

When Aggregation-Induced Emission Meets Perovskites: Efficient Defect-Passivation and Charge-Transfer for Ambient Fabrication of Perovskite Solar Cells

The intrinsic defects in perovskite film can serve as non-radiative recombination center to limit the performance and stability of metal halide perovskite solar cells (PSCs). The additive engineering in perovskite film is always applied to produce high-efficiency PSCs in recent years. Here, a typical donor-acceptor (D−A) structured aggregation-induced emission (AIE) molecule tetraphenylethene-2-dicyano-methylene-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran (TPE-TCF) was introduced into perovskite film. The D−A structure of TPE-TCF molecule provided additional charge transfer channels, contributing to transporting electron of TPE-TCF-based device. The cyano (C≡N) of TPE-TCF can interact with the uncoordinated Pb to from a relatively stable intermediate, PbI₂⋅TPE-TCF, resulting in the slower crystal growth, reduced the defects at the grain boundaries and suppressed carrier recombination. As a consequence, the power conversion efficiency (PCE) of TPE-TCF-modified PSCs achieved a remarkably enhanced from 15.63 to 19.66 % with negligible hysteresis, which was prominent in methylammonium lead iodide-based devices fabricated under ambient condition. Furthermore, the PSCs modified by AIE molecule possessed an outstanding stability and maintain about 86 % of the initial PCE after 300 h storage in air at 25–35 °C with a high relative humidity (RH) of ≈85 %. This work suggests that incorporating AIE molecule into perovskite is a promising strategy for facilitating high-performance PSCs commercialization in ambient environment without glovebox.     

Inside Back Cover: Directional Transformation of Heterometallic Oxo Clusters: A New Approach to Prepare Wide-Bandgap Cathode Interlayers for Perovskite Solar Cells (Angew. Chem. Int. Ed. 17/2023)

Typical wide-band gap cathode interlayer materials are difficulty in reducing interface recombination without limiting charge transport in perovskite solar cells (PSCs). Here, a lead-doped titanium-oxo cluster protected by S-containing ligands is introduced at the interface of perovskite and SnO₂. By in situ heating, the cluster is transformed into PbSO₄-PbTi₃O₇ heterostructure. The oxygen atoms from sulfate ion in heterostructure connect with iodine from perovskite to boost interfacial electron extraction and reduce charge recombination. While the yielded metallic interface between PbSO₄ and PbTi₃O₇ promotes the electron transport across the interface. Finally, an efficiency as high as 24.2 % for the modified PSC is obtained. The heterostructure well-stabilize the interface of perovskite and SnO₂, to greatly improve the device stability. This work provides a novel strategy to prepare wide-band gap cathode interlayer by directional transformation of heterometallic oxo clusters.     

Coagulated SnO2 Colloids for High‐Performance Planar Perovskite Solar Cells with Negligible Hysteresis and Improved Stability

Organic–inorganic perovskite solar cells with a planar architecture have attracted much attention due to the simple structure and easy fabrication. However, the power conversion efficiency and hysteresis behavior need to be improved for planar‐type devices where the electron transport layer is vital. SnO₂ is a promising alternative for TiO₂ as the electron transport layer owing to the high charge mobility and chemical stability, but the hysteresis issue can still remain despite the use of SnO₂. Now, a facile and effective method is presented to simultaneously tune the electronic property of SnO₂ and passivate the defects at the interface between the perovskite and SnO₂. The perovskite solar cells with ammonium chloride induced coagulated SnO₂ colloids exhibit a power conversion efficiency of 21.38 % with negligible hysteresis, compared to 18.71 % with obvious hysteresis for the reference device. The device stability can also be significantly improved.     

Graphdiyne: Bridging SnO2 and Perovskite in Planar Solar Cells

The matching of charge transport layer and photoactive layer is critical in solar energy conversion devices, especially for planar perovskite solar cells based on the SnO₂ electron‐transfer layer (ETL) owing to its unmatched photogenerated electron and hole extraction rates. Graphdiyne (GDY) with multi‐roles has been incorporated to maximize the matching between SnO₂ and perovskite regarding electron extraction rate optimization and interface engineering towards both perovskite crystallization process and subsequent photovoltaic service duration. The GDY doped SnO₂ layer has fourfold improved electron mobility due to freshly formed C?O σ bond and more facilitated band alignment. The enhanced hydrophobicity inhibits heterogeneous perovskite nucleation, contributing to a high‐quality film with diminished grain boundaries and lower defect density. Also, the interfacial passivation of Pb?I anti‐site defects has been demonstrated via GDY introduction.     

Antioxidant induced bulk passivation for efficient and stable hole transport layer-free carbon electrode perovskite solar cells

Defect passivation is one of the important strategies to improve the efficiency and stability of perovskite solar cells. In this work, 2,6-di‑tert‑butyl‑4-methylphenol (BHT) as antioxidant was introduced into the perovskite precursor solution to improve the quality of the prepared perovskite films, so that these films performed a larger and uniform grain size. Moreover, the −OH functional group in BHT interacts with I⁻, thus reducing the density of defect states and inhibiting the non-radiative recombination. The presence of hydrophobic groups in BHT protects the film from moisture erosion and improves the long-term stability of PSCs devices. The maximum photoelectric conversion efficiency of the constructed ITO/SnO₂/BHT-MAPbI₃/Carbon device is 16.88%, and the unpackaged cell maintains the initial efficiency of 99.3% after 698 h of storage under the environmental condition of 30% humidity. This work provides an efficient approach to improve the performance of printable hole transport layer-free carbon electrode perovskite solar cells.     

Managing Excess Lead Iodide with Functionalized Oxo-Graphene Nanosheets for Stable Perovskite Solar Cells

Stability issues could prevent lead halide perovskite solar cells (PSCs) from commercialization despite it having a comparable power conversion efficiency (PCE) to silicon solar cells. Overcoming drawbacks affecting their long-term stability is gaining incremental importance. Excess lead iodide (PbI₂) causes perovskite degradation, although it aids in crystal growth and defect passivation. Herein, we synthesized functionalized oxo-graphene nanosheets (Dec-oxoG NSs) to effectively manage the excess PbI₂. Dec-oxoG NSs provide anchoring sites to bind the excess PbI₂ and passivate perovskite grain boundaries, thereby reducing charge recombination loss and significantly boosting the extraction of free electrons. The inclusion of Dec-oxoG NSs leads to a PCE of 23.7 % in inverted (p-i-n) PSCs. The devices retain 93.8 % of their initial efficiency after 1,000 hours of tracking at maximum power points under continuous one-sun illumination and exhibit high stability under thermal and ambient conditions.     

Alkyl-Chain-Regulated Charge Transfer in Fluorescent Inorganic CsPbBr3 Perovskite Solar Cells

Improved charge extraction and wide spectral absorption promote power conversion efficiency of perovskite solar cells (PSCs). The state-of-the-art carbon-based CsPbBr₃ PSCs have an inferior power output capacity because of the large optical band gap of the perovskite film and the high energy barrier at perovskite/carbon interface. Herein, we use alkyl-chain regulated quantum dots as hole-conductors to reduce charge recombination. By precisely controlling alkyl-chain length of ligands, a balance between the surface dipole induced charge coulomb repulsive force and quantum tunneling distance is achieved to maximize charge extraction. A fluorescent carbon electrode is used as a cathode to harvest the unabsorbed incident light and to emit fluorescent light at 516 nm for re-absorption by the perovskite film. The optimized PSC free of encapsulation achieves a maximum power conversion efficiency up to 10.85 % with nearly unchanged photovoltaic performances under 80 %RH, 80 °C, or light irradiation in air.     

Fluorine-Containing Passivation Layer via Surface Chelation for Inorganic Perovskite Solar Cells

Minimizing surface defect is vital to further improve power conversion efficiency (PCE) and stability of inorganic perovskite solar cells (PSCs). Herein, we designed a passivator trifluoroacetamidine (TFA) to suppress CsPbI_3−xBr_x film defects. The amidine group of TFA can strongly chelate onto the perovskite surface to suppress the iodide vacancy, strengthened by additional hydrogen bonds. Moreover, three fluorine atoms allow strong intermolecular connection via intermolecular hydrogen bonds, thus constructing a robust shield against moisture. The TFA-treated PSCs exhibit remarkably suppressed recombination, yielding the record PCEs of 21.35 % and 17.21 % for 0.09 cm² and 1.0 cm² device areas, both of which are the highest for all-inorganic PSCs so far. The device also achieves a PCE of 39.78 % under indoor illumination, the highest for all-inorganic indoor photovoltaic devices. Furthermore, TFA greatly improves device ambient stability by preserving 93 % of the initial PCE after 960 h.     

Suppressing Interfacial Charge Recombination in Electron-Transport-Layer-Free Perovskite Solar Cells to Give an Efficiency Exceeding 21 %

The performances of electron-transport-layer (ETL)-free perovskite solar cells (PSCs) are still inferior to ETL-containing devices. This is mainly due to severe interfacial charge recombination occurring at the transparent conducting oxide (TCO)/perovskite interface, where the photo-injected electrons in the TCO can travel back to recombine with holes in the perovskite layer. Herein, we demonstrate for the first time that a non-annealed, insulating, amorphous metal oxyhydroxide, atomic-scale thin interlayer (ca. 3 nm) between the TCO and perovskite facilitates electron tunneling and suppresses the interfacial charge recombination. This largely reduced the interfacial charge recombination loss and achieved a record efficiency of 21.1 % for n-i-p structured ETL-free PSCs, outperforming their ETL-containing metal oxide counterparts (18.7 %), as well as narrowing the efficiency gap with high-efficiency PSCs employing highly crystalline TiO₂ ETLs.     

Ambient Air Temperature Assisted Crystallization for Inorganic CsPbI2Br Perovskite Solar Cells

Inorganic cesium lead halide perovskites, as alternative light absorbers for organic–inorganic hybrid perovskite solar cells, have attracted more and more attention due to their superb thermal stability for photovoltaic applications. However, the humid air instability of CsPbI₂Br perovskite solar cells (PSCs) hinders their further development. The optoelectronic properties of CsPbI₂Br films are closely related to the quality of films, so preparing high-quality perovskite films is crucial for fabricating high-performance PSCs. For the first time, we demonstrate that the regulation of ambient temperature of the dry air in the glovebox is able to control the growth of CsPbI₂Br crystals and further optimize the morphology of CsPbI₂Br film. Through controlling the ambient air temperature assisted crystallization, high-quality CsPbI₂Br films are obtained, with advantages such as larger crystalline grains, negligible crystal boundaries, absence of pinholes, lower defect density, and faster carrier mobility. Accordingly, the PSCs based on as-prepared CsPbI₂Br film achieve a power conversion efficiency of 15.5% (the maximum stabilized power output of 15.02%). Moreover, the optimized CsPbI₂Br films show excellent robustness against moisture and oxygen and maintain the photovoltaic dark phase after 3 h aging in an air atmosphere at room temperature and 35% relative humidity (R.H.). In comparison, the pristine films are completely converted to the yellow phase in 1.5 h.     

Alkyl‐Chain‐Regulated Charge Transfer in Fluorescent Inorganic CsPbBr3 Perovskite Solar Cells

Improved charge extraction and wide spectral absorption promote power conversion efficiency of perovskite solar cells (PSCs). The state‐of‐the‐art carbon‐based CsPbBr₃ PSCs have an inferior power output capacity because of the large optical band gap of the perovskite film and the high energy barrier at perovskite/carbon interface. Herein, we use alkyl‐chain regulated quantum dots as hole‐conductors to reduce charge recombination. By precisely controlling alkyl‐chain length of ligands, a balance between the surface dipole induced charge coulomb repulsive force and quantum tunneling distance is achieved to maximize charge extraction. A fluorescent carbon electrode is used as a cathode to harvest the unabsorbed incident light and to emit fluorescent light at 516 nm for re‐absorption by the perovskite film. The optimized PSC free of encapsulation achieves a maximum power conversion efficiency up to 10.85 % with nearly unchanged photovoltaic performances under 80 %RH, 80 °C, or light irradiation in air.     

Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

SnO2双层电子传输层对钙钛矿太阳能电池界面电荷传输的影响

为了改善基于SnO₂电子传输层的钙钛矿太阳能电池的界面电荷传输特性和迟滞现象,我们采用低温溶液处理工艺制备了4种不同类型的SnO₂电子传输层用于钙钛矿太阳能电池,包括由SnCl₄·5H₂O溶胶-凝胶层(Cl₄-SnO₂)、SnCl₂·2H₂O溶胶-凝胶层(Cl₂-SnO₂)和SnO₂纳米颗粒层(NP-SnO₂)与SnO₂胶体层(Col-SnO₂)两两相互作用形成的同质结SnO₂双层电子传输层和Col-SnO₂单层电子传输层;并系统研究了不同SnO₂双层电子传输层对器件光电性能和迟滞现象的影响。通过扫描电镜(SEM)、X射线衍射(XRD)、稳态光致发光(PL)、电化学阻抗(EIS)和稳定性测试等表征证实,在Col-SnO...     

Volatile Dual-Solvent Assisted Intermediate Phase Regulation for Anti-Solvent-Free Perovskite Photovoltaics

The unprecedented development of perovskite solar cells (PSCs) makes them one of the most promising candidates for terawatt-scale green energy production with low cost. However, the high boiling point solvents during the solution-processed film deposition cause anisotropic crystal growth and toxic solvent vapor during high-throughput manufacturing. Here, a dual-component green solvent consisting of isopropyl acetate and acetonitrile is proposed to form a volatile perovskite precursor, which can realize the high-quality perovskite thin film deposition by intermediate phase regulation. A room-temperature stable perovskite intermediate phase is constructed with the engagement of isopropyl acetate as co-solvent, which suppresses the exploding nucleation rate in volatile perovskite precursor, providing a fine grain growth rate and wide processing window in scalable film deposition. The corresponding PSCs fabricated by blade coating without anti-solvents or gas quenching achieve power conversion efficiency (PCE) of 16.37 % and 15.29 % for the areas of 14.08 cm² and 37.83 cm², respectively.     

Interfacial Engineering for Efficient Low-Temperature Flexible Perovskite Solar Cells

Photovoltaic technology with low weight, high specific power in cold environments, and compatibility with flexible fabrication is highly desired for near-space vehicles and polar region applications. Herein, we demonstrate efficient low-temperature flexible perovskite solar cells by improving the interfacial contact between electron-transport layer (ETL) and perovskite layer. We find that the adsorbed oxygen active sites and oxygen vacancies of flexible tin oxide (SnO₂) ETL layer can be effectively decreased by incorporating a trace amount of titanium tetrachloride (TiCl₄). The effective defects elimination at the interfacial increases the electron mobility of flexible SnO₂ layer, regulates band alignment at the perovskite/SnO₂ interface, induces larger perovskite crystal growth, and improves charge collection efficiency in a complete solar cell. Correspondingly, the improved interfacial contact transforms into high-performance solar cells under one-sun illumination (AM 1.5G) with efficiencies up to 23.7 % at 218 K, which might open up a new era of application of this emerging flexible photovoltaic technology to low-temperature environments such as near-space and polar regions.     

Perovskite Films Regulation via Hydrogen-Bonded Polymer Network for Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) are considered as a promising photovoltaic technology due to their high efficiency and low cost. However, their long-term stability, mechanical durability, and environmental risks are still unable to meet practical needs. To overcome these issues, we designed a multifunctional elastomer with abundant hydrogen bonds and carbonyl groups. The chemical bonding between polymer and perovskite could increase the growth activation energy of perovskite film and promote the preferential growth of high-quality perovskite film. Owing to the low defect density and gradient energy-level alignment, the corresponding device exhibited a champion efficiency of 23.10 %. Furthermore, due to the formation of the hydrogen-bonded polymer network in the perovskite film, the target devices demonstrated excellent air stability and enhanced flexibility for the flexible PSCs. More importantly, the polymer network could coordinate with Pb²⁺ ions, immobilizing lead atoms to reduce their release into the environment. This strategy paves the way for the industrialization of high-performance flexible PSCs.