Synthesis of PP graft copolymers via anionic living graft-from reactions of polypropylene containing reactive p-methylstyrene units

In this article, we discuss a new chemical route for preparing polypropylene (PP) graft copolymers containing a PP backbone and several (polar and nonpolar) polymer side chains, including polybutadiene, polystyrene, poly(p-methylstyrene), poly(methyl methacrylate), and polyacrylonitrile. The new PP graft copolymers had a controlled molecular structure and a known PP molecular weight, graft density, graft length, and narrow molecular weight distribution of the side chains. The chemistry involves an intermediate poly(propylene-co-p-methylstyrene) copolymer containing few p-methylstyrene (p-MS) units. The methyl group in a p-MS unit could be lithiated selectively by alkylithium to form a stable benzylic anion. Because of the insolubility of the PP copolymer at room temperature, the excess alkylithium could be removed completely from the lithiated polymer. By the addition of the anionically polymerizable monomers, including polar and nonpolar monomers, the stable benzylic anions in PP initiated a living anionic graft-from polymerization at ambient temperature to produce PP graft copolymers without any significant side reactions. The side-chain length was basically proportional to the reaction time and monomer concentration. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4176–4183, 1999     

Preparation of chiral amino acid materials and the study of their interactions with 1,1‐Bi‐2‐naphthol

The amino acid tryptophan has been converted into acrylamide monomers using L /D ‐tryptophan methyl ester forming the enantiopure chiral monomers. Attempts were made to polymerize these monomers via reversible addition fragmentation chain transfer (RAFT) polymerization to form poly(tryptophan). Unfortunately, this proved difficult, and instead, a postpolymerization modification route was used by first synthesizing poly(pentafluorophenyl acrylate) via RAFT, which was then substituted with L ‐tryptophan methyl ester to give poly(L ‐tryptophan). The interactions of the newly synthesized tryptophan monomers, as well as previously reported phenylalanine monomers, were studied in the presence of rac‐BINOL. It has been shown that the enantiomers of tryptophan have a stronger interaction with BINOL than phenylalanine and this has been attributed to the larger π system on the side chain. By monitoring the shifts and splitting of the phenolic protons of BINOL, it has been observed that S‐BINOL interacts more favorably with L ‐monomer enantiomers and R‐BINOL with D ‐monomer enantiomers. Similar interactions have also been seen with poly(phenylalanine) and the newly synthesized poly(tryptophan) materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cationic ring-opening polymerizations of cyclic ketene acetals initiated by acids at high temperatures

Three unsubstituted cyclic ketene acetals (CKAs), 2-methylene-1,3-dioxolane, 1a , 2-methylene-1,3-dioxane, 2a , and 2-methylene-1,3-dioxepane, 3a , undergo exclusive 1,2-addition polymerization at low temperatures, and only poly(CKAs) are obtained. At higher temperatures, ring-opening polymerization (ROP) can be dominant, and polymers with a mixture of ester units and cyclic ketal units are obtained. When the temperature is raised closer to the ceiling temperature (T_c) of the 1,2-addition propagation reaction, 1,2-addition polymerization becomes reversible and ring-opened units are introduced to the polymer. The ceiling temperature of 1,2-addition polymerization varies with the ring size of the CKAs (lowest for 3a , highest for 2a ). At temperatures below 138°C, 2-methylene-1,3-dioxane, 2a , underwent 1,2-addition polymerization. Insoluble poly(2-methylene-1,3-dioxane) 100% 1,2-addition was obtained. At above 150°C, a soluble polymer was obtained containing a mixture of ring-opened ester units and 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxolane, 1a , polymerized only by the 1,2-addition route at temperatures below 30°C. At 67–80°C, an insoluble polymer was obtained, which contained mostly 1,2-addition units but small amounts of ester units were detected. At 133°C, a soluble polymer was obtained containing a substantial fraction of ring-opened ester units together with 1,2-addition cyclic ketal units. 2-Methylene-1,3-dioxepane, 3a , underwent partial ROP even at 20°C to give a soluble polymer containing ring-opened ester units and 1,2-addition cyclic ketal units. At −20°C, 3a gave an insoluble polymer with 1,2-addition units exclusively. Several catalysts were able to initiate the ROP of 1a, 2a , and 3a , including RuCl₂(PPh₃)₃, BF₃, TiCl₄, H₂SO₄, H₂SO₄ supported on carbon, (CH₃)₂CHCOOH, and CH₃COOH. The initiation by Lewis acids or protonic acids probably occurs through an initial protonation. The propagation step of the ROP proceeds via an S_N2 mechanism. The chain transfer and termination rates become faster at high temperatures, and this may be the primary reason for the low molecular weights (M_n ≤ 10³) observed for all ring-opening polymers. The effects of temperature, monomer and initiator concentration, water content, and polymerization time on the polymer structure have been investigated during the Ru(PPh₃)₃Cl₂-initiated polymerization of 2a . High monomer concentrations ([M]/[ln]) increase the molecular weight and decreased the amount of ring-opening. Higher initiator concentrations (Ru(PPh₃)₃Cl₂) and longer reaction times increase molecular weight in high temperature reactions. Successful copolymerization of 2a with hexamethylcyclotrisiloxane was initiated by BF₃OEt₂. The copolymer obtained displayed a broad molecular weight distribution; M̄_n = 6,490, M̄_w = 15,100, M̄_z = 44,900. This polymer had about 47 mol % of ( Me₂SiO ) units, 35 mol % of ring-opened units, and 18 mol % 1,2-addition units of 2a . © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3655–3671, 1997     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

Expanding vinyl ether monomer repertoire for ring-expansion cationic polymerization: Various cyclic polymers with tailored pendant groups

Herein, we clarified the ring-expansion cationic polymerization with a cyclic hemiacetal ester (HAE)-based initiator was versatile in terms of applicable vinyl ether monomers. Although there was a risk that higher reactive vinyl ethers may incur β-H elimination of the HAE-based cyclic dormant species to irreversibly give linear chains, the polymerizations were controlled to give corresponding cyclic polymers from various alkyl vinyl ethers of different reactivities. Functional vinyl ether monomers were also available, and for instance a vinyl ether monomer carrying an initiator moiety for metal-catalyzed living radical polymerization in the pendant allowed construction of ring-linear graft copolymers through the grafting-from approach. Furthermore, ring-based gel was prepared via the addition of divinyl ether at the end of the ring-expansion polymerization, where multi HAE bonds cyclic polymers or fused rings were crosslinked with each other. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3082–3089     

Facile synthesis of star‐shaped copolymers via combination of RAFT and ring opening polymerization

Reversible addition fragmentation chain transfer (RAFT) polymerization and bifunctional sparteine/thiourea organocatalyst‐mediated ring opening polymerization (ROP) were combined to produce poly(L ‐lactide) star polymers and poly(L ‐lactide‐co‐styrene) miktoarm star copolymers architecture following a facile experimental procedure, and without the need for specialist equipment. RAFT was used to copolymerize ethyl acrylate (EA) and hydroxyethyl acrylate (HEA) into poly(EA‐co‐HEA) co‐oligomers of degree of polymerization 10 with 2, 3, and 4 units of HEA, which were in turn used as multifunctional initiators for the ROP of L ‐lactide, using a bifunctional thiourea organocatalytic system. Furthermore, taking advantage of the living nature of RAFT polymerization, the multifunctional initiators were chain extended with styrene (poly((EA‐co‐HEA)‐b‐styrene) copolymers), and used as initiators for the ROP of L ‐lactide, to yield miktoarm star copolymers. The ROP reactions were allowed to proceed to high conversions (>95%) with good control over molecular weights (ca. 28,000‐230,000 g/mol) and polymer structures being observed, although the molecular weight distributions are generally broader (1.3–1.9) than those normally observed for ROP reactions. The orthogonality of both polymerization techniques, coupled with the ubiquity of HEA, which is used as a monomer for RAFT polymerization and as an initiator for ROP, offer a versatile approach to star‐shaped copolymers. Furthermore, this approach offers a practical approach to the synthesis of polylactide star polymers without a glove box or stringent reaction conditions. The phase separation properties of the miktoarm star copolymers were demonstrated via thermal analyses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6396–6408, 2009     

Thermoresponsive Poly(2‐oxazine)s

The monomers 2‐methyl‐2‐oxazine (MeOZI), 2‐ethyl‐2‐oxazine (EtOZI), and 2‐n‐propyl‐2‐oxazine (nPropOZI) were synthesized and polymerized via the living cationic ring‐opening polymerization (CROP) under microwave‐assisted conditions. pEtOZI and pnPropOZI were found to be thermoresponsive, exhibiting LCST behavior in water and their cloud point temperatures (T_CP) are lower than for poly(2‐oxazoline)s with similar side chains. However, comparison of poly(2‐oxazine) and poly(2‐oxazoline)s isomers reveals that poly(2‐oxazine)s are more water soluble, indicating that the side chain has a stronger impact on polymer solubility than the main chain. In conclusion, variations of both the side chains and the main chains of the poly(cyclic imino ether)s resulted in a series of distinct homopolymers with tunable T_CP.     

Ring-Opening Polymerization of the Cyclic Ester Amide Derived from Adipic Anhydride and 1-Amino-6-hexanol in Melt and in Solution

The ring-opening polymerization (ROP) of the cyclic ester amide (cEA) 5 (systematic name, 1-oxa-8-aza-cyclotetradecane-9,14-dione) - prepared from adipic anhydride and 1-amino-6-hexanol - in the melt at 165 °C and in solution at 100 °C and 120 °C with Bu₂Sn(OMe)₂ or Ti(OBu)₄ as initiator yields the alternating poly(ester amide) (PEA) 4 (systematic name, poly(5-(6-oxyhexylcarbamoyl)-pentanoate) with regular microstructure. Kinetic studies for different monomer-to-initiator ratios, different reaction media, initiators and temperatures reveal that the ROP is a first-order reaction with respect to the monomer. Under suitable polymerization conditions termination and transfer reactions are suppressed. The elementary chain growth reaction proceeds by a coordination insertion mechanism in analogy to the polymerization of lactones. By using monohydroxy- and bishydroxy-functional telechelic poly(ethylene oxide) and Sn(octoate)₂ as the initiating system poly(ethylene oxide)-block-poly(ester amide)s and poly(ester amide)-block-poly(ethylene oxide)-block-poly(ester amide)s are obtained. The poly(ester amide) 4 is a semicrystalline material with a melting point of 140 °C, the block copolymers are phase separated systems showing two melting points characteristic for the respective homopolymers.     

Syntheses and radical polymerization behavior of novel optically active methacrylamides having (L)-leucine structure in the side chains

Syntheses and radical polymerizations of methacrylamides having (L)-leucine and N-methyl-(L)-leucine methyl ester structures in the side chains N-methacryloyl-(L)-leucine methyl ester (MA-L-M) and N-methyl-N-methacryloyl-(L)-leucine methyl ester (N-Me-MA-L-M) were carried out. The monomers were prepared by the reactions of methacryloyl chloride with the corresponding amino acid methyl esters. Radical polymerizations were carried out in the presence of appropriate initiators at 60°C and 120°C. MA-L-M afforded the corresponding polymer with M_ns 38,000 ∼ 372,000 in high yields, while N-Me-MA-L-M afforded a trace amount of polymer at 60°C and in a low yield even at 120°C. Both inversion and increase of absolute value of specific rotation were observed in the transformation from MA-L-M (+1.3°C) to poly(MA-L-M) (−35.7°C). Changes in the CD spectral pattern and the conformation of the leucine moiety were confirmed from the monomer to polymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2681–2690, 1998     

Functionalization of polymers prepared by ATRP using radical addition reactions

Low molecular weight linear poly(methyl acrylate), star and hyperbranched polymers were synthesized using atom transfer radical polymerization (ATRP) and end‐functionalized using radical addition reactions. By adding allyltri‐n‐butylstannane at the end of the polymerization of poly(methyl acrylate), the polymer was terminated by allyl groups. When at high conversions of the acrylate monomer, allyl alcohol or 1,2‐epoxy‐5‐hexene, monomers which are not polymerizable by ATRP, were added, alcohol and epoxy functionalities respectively were incorporated at the polymer chain end. Functionalization by radical addition reactions was demonstrated to be applicable to multi‐functional polymers such as hyperbranched and star polymers.     

Preparation of poly(phenylene vinylene) from cycloalkylene sulfonium salt monomers and polymers

Two new types of p-xylene bis-sulfonium chloride monomers were prepared from cycloalkylene sulfides. The polymerization characteristics of these monomers to form poly(p-xylene sulfonium chlorides), and the thermal elimination reactions of their polymers to poly(p-phenylene vinylene), were compared with those of two monomers prepared from dialkyl sulfides. The cycloalkylene sulfonium chloride monomer polymerized to higher yields and to higher molecular weight polymers, which showed more efficient elimination reactions.     

Recent Advances in Metal-Mediated Stereoselective Ring-Opening Polymerization of Functional Cyclic Esters towards Well-Defined Poly(hydroxy acid)s: From Stereoselectivity to Sequence-Control

Poly(hydroxy acid)s are a family of biocompatible and (bio)degradable polyesters with various outcomes in different domains of application. To date, poly(hydroxy acid)s are best prepared by ring-opening polymerization (ROP) of the corresponding cyclic esters. Using racemic chiral monomers featuring side-chain groups enables to access, providing a stereoselective catalyst/initiator system is implemented, stereoregular functional polymers, thereby improving their physico–chemical properties, and ultimately, widening their range of uses. Here, we highlight a few important advances in metal-mediated stereoselective ROP of cyclic esters towards the synthesis of (functional) stereoregular poly(hydroxy acid)s that have recently been disclosed, emphasizing on (functional) β- and γ-lactones, diolide and O-carboxyanhydride (OCA) monomers and yttrium-based catalysis. Fine-tuning of the substituents flanked on the catalyst ligand enables reaching poly(hydroxy acid)s with syndiotactic and also isotactic microstructures. The stereocontrol mechanisms at work and their probable origin, relying on steric but also electronic factors imparted in particular by the ligand substituents, are discussed. Taking advantage of such stereoselective ROPs, original copoly(hydroxy acid)s with gradient or alternated patterns then become accessible from the use of mixtures of chemically different, oppositely configured enantiopure monomers.     

Dual-functional,aromatic, epoxy-methacrylate monomers from bio-based feedstocks and their respective epoxy-functional thermoplastics

Dual-functional monomers consist of two distinctly different functional groups that enable chemical versatility. The most readily available epoxy-methacrylate dual-functional monomer is glycidyl methacrylate (GMA). In an effort to produce bio-based, aromatic complements to GMA, asymmetric phenolic diols (vanillyl alcohol, syringyl alcohol, gastrodigenin, and tyrosol) were identified and selectively epoxidized at the aromatic hydroxyl followed by subsequent esterification at the aliphatic hydroxyl to prepare dual functional monomers, vanillyl alcohol epoxy-methacrylate (VAEM), syringyl alcohol epoxy-methacrylate (SAEM), gastrodigenin epoxy-methacrylate (GDEM), and tyrosol epoxy-methacrylate (TEM). These monomers are viable platforms for a multitude of applications due to their unique chemical functionalities. VAEM, SAEM, GDEM, and TEM were homopolymerized individually to produce aromatic, bio-based epoxy-functional thermoplastics analogous to poly(GMA). The molecular weight distributions and thermal properties of each polymer were evaluated, as were the surface characteristics of flow-coated thin films from these polymers. Most of the newly prepared epoxy-functional thermoplastics exhibited increased thermal stability (initial decomposition temperatures >260 °C in air) relative to poly(GMA), while retaining similar glass transition temperatures (~ 65 °C) and surface energies (~ 53 mJ m⁻²); thus, these materials could be substituted for poly(GMA) and enable use in higher-temperature applications. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 673–682     

Grafting of polymers with controlled molecular weight onto ultrafine silica surface

To graft polymers with controlled molecular weight and narrow molecular weight distribution, the grafting of polymers onto ultrafine silica surface by the termination of living polymer cation with amino groups introduced onto the surface was investigated. The introduction of amino or N-phenylamino groups onto the silica surface was achieved by the treatment of silica with γ-aminopropyltriethxysilane or N-phenyl-γ-aminopropyltrimethoxysilane. It was found that these amino groups on silica are readily reacted with living poly(isobutyl vinyl ether) (polyIBVE), which was generated with CF₃COOH/ZnCl₂ initiating system, and polyIBVE with controlled molecular weight and narrow molecular weight distribution is grafted onto the surface. By the termination of living poly(2-methyl-2-oxazoline), which was generated with methyl p-toluenesulfonate initiator, with amino groups on silica, polyMeOZO was also grafted onto the surface. The percentage of grafting of polymer onto the silica surface decreased with increasing molecular weight of the living polymer, because the steric hindrance of silica surface increases with increasing molecular weight of living polymer. Polymer-grafted silica gave a stable dispersion in a good solvent for grafted chains. © 1995 John Wiley & Sons, Inc.     

Obtaining aliphatic branched polycarbonates via simple copolymerization of trimethylene carbonate with cyclic carbonate containing pendant ester groups

Different possibilities for obtaining branched, functional carbonate copolymers are presented in this study. Copolymers were synthesized according to the ring‐opening polymerization (ROP) of the cyclic carbonate monomers, containing pendant ester groups. As an example, we chose copolymerization of ethyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate (MTC‐Et) with trimethylene carbonate (TMC), using zinc (II) and lanthanum (III) acetylacetonates as ROP initiators. The transesterification processes of ester groups in pendant, short chains, appearing during conducted copolymerization, led to the establishment of two different fractions: first‐branched and high molecular weight fraction and second‐linear and low molecular weight. The content of this high‐molecular‐weight fraction increased with both: the amount of MTC‐Et in started reaction mixture and the time of conducted copolymerization. Reactivity constants in studied reaction were determined. It was possible to obtain the copolymer fraction (ca. 30%) with molecular weight of up to a million g/mol, with a highly branched chain microstructure using lanthanum (III) acetylacetonate as initiator. Conclusions were based on detailed NMR analysis, determining microstructure of the copolymer chains and additionally on GPC and DSC measurement. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 808–819     

Catalyzed silicon-mediated living polymerizations,structure control,catalyst design and mechanisms

Group transfer polymerization (GTP) and the related Aldol-GTP are new types of living polymerization mediated by silicon for precise control of polymer structure. The two processes are regenerative in that the reactions are accompanied by transfer of silyl group from living end to the incoming monomer and vice versa to produce a reactive functional group as the living end. The reaction can be carried out on solid supports, such as crosslinked polystyrene. Even though the reactions are normally catalyzed, they can be carried out at high pressures without the use of any catalyst. They operate above room temperature, thus enabling one to control molecular weight, polydispersity and monomer sequence under industrially significant conditions. The scope of catalysis is broadened to cover oxyanions.     

Controlled/living ring‐opening polymerization of ε‐caprolactone with salicylic acid as the organocatalyst

Ring‐opening polymerization (ROP) of ε‐caprolactone (CL) using salicylic acid (SAA) as the organocatalyst and benzyl alcohol as the initiator in bulk at 80 °C successfully proceeded to give a narrowly distributed poly(ε‐caprolactone) (PCL). In addition, 2‐hydroxyethyl methacrylate, propargyl alcohol, 6‐azido‐1‐hexanol, and methoxy poly(ethylene glycol) were also used as functional initiators. The ¹H NMR, SEC, and MALDI‐TOF MS measurements of the PCL clearly indicate the presence of the initiator residue at the chain end, implying that the SAA‐catalyzed ROP of CL was through the activated monomer mechanism. The kinetic experiments confirmed the controlled/living nature of the SAA‐catalyzed ROP of CL. Furthermore, the block copolymerization of CL and δ‐valerolactone successfully proceeded to give poly(ε‐caprolactone)‐block‐poly(δ‐valerolactone). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1185–1192     

Long-lived polymer radicals. III. Synthesis of block copolymer by the reaction of living poly(N-methylacrylamide) radical with some vinyl monomers

N-Methylacrylamide (NMAAm) was polymerized quantitatively by using di-tert-butyl peroxide as photosensitizer to be, for the most part, incorporated in living poly(NMAAm) radical. The living polymer radical reacted effectively with acrylate monomers to yield block copolymer. Longer alkyl chain of the acrylate monomer caused a decrease in the conversion of the second monomer. Methacrylate monomers, such as methyl methacrylate and cyclohexyl methacrylate, showed relatively low reactivities in comparison with acrylates. Styrene exhibited a much lower conversion. The resulting block copolymers showed different thermochromic behaviors in methyl benzoate from that of poly(NMAAm). This is explained on the basis of the difference between refractive indexes of the block copolymers and poly(NMAAm).     

Synthesis of poly(2‐oxazoline)s with side chain methyl ester functionalities: Detailed understanding of living copolymerization behavior of methyl ester containing monomers with 2‐alkyl‐2‐oxazolines

Poly(2‐oxazoline)s with methyl ester functionalized side chains are interesting as they can undergo a direct amidation reaction or can be hydrolyzed to the carboxylic acid, making them versatile functional polymers for conjugation. In this work, detailed studies on the homo‐ and copolymerization kinetics of two methyl ester functionalized 2‐oxazoline monomers with 2‐methyl‐2‐oxazoline, 2‐ethyl‐2‐oxazoline, and 2‐n‐propyl‐2‐oxazoline are reported. The homopolymerization of the methyl ester functionalized monomers is found to be faster compared to the alkyl monomers, while copolymerization unexpectedly reveals that the methyl ester containing monomers significantly accelerate the polymerization. A computational study confirms that methyl ester groups increase the electrophilicity of the living chain end, even if they are not directly attached to the terminal residue. Moreover, the electrophilicity of the living chain end is found to be more important than the nucleophilicity of the monomer in determining the rate of propagation. However, the monomer nucleophilicity can be correlated with the different rates of incorporation when two monomers compete for the same chain end, that is, in copolymerizations. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2649–2661     

First example of N-heterocyclic carbenes as catalysts for living polymerization: organocatalytic ring-opening polymerization of cyclic esters

A novel metal-free, organocatalytic approach to living polymerization is presented. N-heterocyclic carbenes were employed as nucleophilic catalysts for the ring-opening polymerization (ROP) of cyclic ester monomers. The catalysts is used in combination with an initiator, such as an alcohol, which generates an alpha-end group bearing the ester from the initiating alcohol upon ring-opening and a hydroxyl functional omega-chain end that propagates the chain. This class of catalyst proved to be more reactive than tertiary amine and phosphine nucleophiles, producing narrowly dispersed polymers of predictable molecular weights at room temperature in 1-2 h. Catalysis with respect to both initiating alcohol and monomer was observed. Control of the alpha and omega end-groups was demonstrated with a pyrene-labeled initiator, allowing the preparation of well-defined macromolecular architectures. Analogous to the ROP of cyclic esters using biocatalysts, the polymeriztion pathway using the N-heterocyclic carbenes is believed to ensue through a monomer-activated mechanism.