氧化偶联聚合方法合成电活性聚芳醚酮

通过氧化偶联聚合方法成功地合成出电活性聚芳醚酮. 该反应条件温和, 操作简单, 室温下即可进行. 用红外光谱、核磁共振谱、高效凝胶渗透色谱、循环伏安、热失重、X射线衍射等技术对所合成的聚合物进行了表征, 并探讨了聚合物的性能.     

Poly(organophosphazenes)--unusual new high polymers.

An inorganic-backbone high polymer system based on alternating phosphorus and nitrogen atoms promises to solve many of the problems hitherto associated with conventional organic polymers. The chemistry, structure, biomedical, and technological aspects of these polymers are reviewed.     

聚苯硫醚反应淤浆的处理工艺

综述了聚苯硫醚反应淤浆的处理工艺，包括聚苯硫醚树脂的收集，溶剂的回收和反应助剂的回收两部分，并展望了聚苯硫醚反应淤浆处理工艺的发展趋势。     

Oxidative and photooxidative degradation of poly(acrylic acid)

The oxidative degradation of poly(acrylic acid) (PAA), a water soluble polymer, was studied at various temperatures with different concentrations of persulfates, potassium persulfate (KPS), ammonium persulfate (APS) and sodium persulfate (SPS). The photodegradation of PAA was also examined with APS as oxidizer. The degraded samples were analyzed for the time evolution of molecular weight distribution by gel permeation chromatography. A theoretical model based on the continuous distribution kinetics was developed that accounted for the polymer degradation and the dissociation of persulfate. The rate coefficients for the oxidative and photooxidative degradation of PAA were determined from the parametric fit of the model with experimental data. The rate of degradation increased with increasing amount of persulfate in both oxidative and photooxidative degradation. The rate of degradation also increased with increasing temperature in the case of oxidative degradation.     

Synthesis,Characterization and Application of Amphiphilic Copolymer Poly(vinyl alcohol)-g-Poly(butyl acrylate)

An amphiphilic graft copolymer poly(vinyl alcohol)-g-poly(butyl acrylate) (PVA-g-PBA) was synthesized by grafting butyl acrylate (BA) onto poly(vinyl alcohol) (PVA) with potassium persulfate (KPS) as free radical initiator in N₂ atmosphere and aqueous medium. The formation of graft copolymer was confirmed by means of infrared spectroscopy (IR). The influences of initiator, monomer concentration and reaction time on the percentage of monomer conversion(C _M), graft degree(Gd) and graft efficiency(Ge) have been discussed in detail. PVA-g-PBA was used as compatibilizer in blends of chlorinated polyethylene (CPE)/ poly(acrylic acid-co-acrylamide)[P(AA-AM)], and the compatibility between CPE and P(AA-AM) was also investigated.     

Enzymatic Synthesis and Characterization of Novel Amphiphilic Triblock Copolymer Poly（p-dioxanoneco-5-benzyloxytrimethylene carbonate）-block-poly（ethylene glycol）

In recent years, amphiphilic block copolymers consisting of hydrophilic and hydrophobic segments have attracted much attention, because of their unique phase behavior in aqueous media and potential applications as drug delivery systems1. Poly(ethylene gly…     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Miscibility and Crystallization in Binary Crystalline Blends of Poly(butylene terephthalate) with Poly(butylene terephthalate-e-caprolactone)

Poly(butylene terephthalate)/poly(butylene terephthalate-e-caprolactone) is a new A/AxB1-x binary crystalline blend with intra-molecular repulsion interaction. Using the mean-field binary interaction model, the value of interaction parameter between the butylene terephthalate and caprolactone structural unit was first reported to be 0.305. This blend exhibited different crystallization behavior from a typical homopolymer/copolymer blend, which was carefully investigated by di?erential scanning calorimetry. It was found that poly(butylene terephthalate-e-caprolactone) copolymers have a great effect on the pure poly(butylene terephthalate) chain mobility and poly(butylene terephthalate) crystalline lattice packing. In the meantime, the crystallization of butylene terephthalate segments in copolymers was restricted by the previously formed poly(butylene terephthalate) crystallites. The two constituents for blending can not form a co-crystal in the range of composition even if they have the same butylene terephthalate unit. It can be concluded that longersegments in a copolymer would be beneficial for the formation of a co-crystal in blends.     

Biodegradable Foaming Material of Poly(butylene adipate-co-terephthalate) (PBAT)/Poly(propylene carbonate) (PPC)

A biodegradable blend foaming material of poly(butylene adipate-co-terephthalate)(PBAT)/poly(propylene carbonate)(PPC)was successfully prepared by chemical foaming agent and screw extrusion method.First,PBAT was modified by bis(tert-butyl dioxy isopropyl)benzene(BIBP)for chain extension,and then the extended PBAT(E-PBAT)was foamed with PPC using a twin(single)screw extruder.By analyzing the properties of the blends,we found that Young’s modulus increased from 58.8 MPa of E-PBAT to 244.7 MPa of E-PBAT/PPC 50/50.The viscosity of the polymer has a critical influence on the formation of cells.Compared with neat PBAT(N-PBAT),the viscosity of E-PBAT increased by 3396 Pa·s and E-PBAT/PPC 50/50 increased by 8836 Pa·s.Meanwhile,the dynamic mechanical analysis(DMA)results showed that the storage modulus(E’)at room temperature increased from 538 MPa to 1650 MPa.The various phase morphologies(“sea-island”,“quasi-co-continuous”and“cocontinuous”)and crystallinity of the blends affected the spread velocity of gas and further affected the foaming morphology in E-PBAT/PPC foam.Therefore,through the analysis of phase morphology and foaming mechanism,we concluded that the E-PBAT/PPC 70/30 component has both excellent strength and the best foaming performance.     

Amphiphilic PPESK-g-PEG graft copolymers for hydrophilic modification of PPESK microporous membranes

Amphiphilic graft copolymers comprising poly(phthalazinone ether sulfone ketone) (PPESK) backbones and poly(ethylene glycol) (PEG) side chains were synthesized and blended into PPESK casting solutions to prepare hydrophilic and anti-fouling microporous membranes. The graft copolymer was prepared by a modified Williamson etherification method. Sodium alkoxide of methoxyl PEG (PEG-ONa) was used to react with chloromethylated PPESK (CMPPESK). FT-IR spectroscopy, ¹H NMR and solid-state ¹³C CP-MAS NMR analysis confirmed the covalent linking of PEG with PPESK backbones. The incorporation ratio of PEG calculated from ¹H NMR was in agreement with that from TGA tests. The graft products were added into PPESK casting solutions to prepare composite porous membranes using phase inversion method. X-ray photoelectron spectroscopy (XPS) and water contact angle examinations indicated that the grafting copolymers were preferentially excluded to the membrane-coagulant interface during membrane forming, contributing the membranes with improved hydrophilicity and surface wettability. Compared with the neat membrane, the blend membranes exhibited a larger surface pore size and less susceptible to protein fouling.     

苯并双噁唑类聚合物的合成

详细介绍了以4,6-二氨基间苯二酚盐酸盐(DADHB)为原料,采用多聚磷酸法、三甲基硅烷基化法、中间相聚合法、单体成盐法合成聚对苯撑苯并双噁唑(PBO),还有以4,6-二硝基间苯二酚(DNR)为原料,先选择还原制得4-氨基-6-硝基间苯二酚盐酸盐,进而与对甲氧羰基苯甲酰氯进行缩环合获得苯并噁唑化合物,再催化加氢合成AB型PBO新单体2-(对甲氧羰基苯基)-5-氨基-6-羟基苯并噁唑,最后自缩聚反应制备PBO的新路线.另外,本文还介绍了直链烯烃型、直链脂肪烷烃型、稠环芳烃型、联苯取代基型、杂环型、聚醚型等苯并双噁唑类聚合物的合成方法.     

高分子量聚对二氧环己酮改进聚DL-乳酸柔韧性的研究

为了提高DL-聚乳酸(PDLLA)的柔韧性,将10～20wt%不同比例的由本课题组自主合成的高分子量聚对二氧环己酮(PPDO)加入到PDLLA基体中,对共混物的微观两相形态、力学性能、热学性能和表面性质、降解性能等物化性质进行了研究.实验结果表明,PPDO加入后,在PDLLA/PPDO共混物的柔韧性得到显著提高的同时,共混物表面亲水性相应提高,降解速率也随之加快.     

基于聚乙二醇结构调控高分子量聚乳酸立构复合体系的结晶行为

设计合成了梳形聚(聚乙二醇甲醚丙烯酸酯)(PPEGA)及其与聚乙二醇(PEG)的嵌段共聚物(PEG-b-PPEGA).通过与高分子量左旋聚乳酸(PLLA)和右旋聚乳酸(PDLA)共混探究了PEG不同的结构对PLA立构复合体系(sc-PLA)结晶的影响.结果 表明线形PEGA和PEG能与sc-PLA完全相容,两者均能促进...     

Preparation of Latexes with Poly(Methyl Methacrylate) Cores and Hydrophilic Polymer Shells Containing Amino Groups

Abstract

Functional latexes with poly(methyl methacrylate) (PMMA) cores and amino‐containing, water‐soluble polymer shells were synthesized via direct graft copolymerization of methyl methacrylate from water‐soluble polymers induced by a small amount of tert‐butyl hydroperoxide (TBHP) at 80°C for 2 h. Amphiphilic graft copolymers and PMMA homopolymers were generated concurrently to form highly monodispersed latexes. The effects of water‐soluble polymer containing different amino group, reaction temperature, TBHP concentration, molecular weight of the polymer and pH of the solution on conversion and grafting efficiency of the monomer and particle size were investigated. Transmission electron microscopic images of the PMMA/poly(ethyleneimine) (PEI) and PMMA/poly(allylamine) (PAA) particles clearly show well‐defined core‐shell morphologies, where PMMA cores are coated with either PEI or PAA shell. The amino‐containing polymer shells were also confirmed with zeta‐potential measurements. Furthermore, the amino‐containing latexes can be produced with a solids content up to 22 wt.%. Thus, this method provides a commercially viable route to functional latexes.     

聚乳酸-聚乙二醇嵌段共聚物晶行为研究

用1H NMR, SEC, XRD和DSC对聚乳酸(PLLA)-聚乙二醇(PEG)二嵌段共聚物进行了表征. 由于共聚物中两种组分比例的不同, 表现出某组分单独结晶或两种组分共同结晶. 用DSC和POM方法, 对两组分含量相当的共聚物进行了熔体结晶行为研究, 并采用Avrami方程进行了结晶动力学计算. 用Lauritzen-Hoffmann理论对PLLA-PEG结晶机理进行了分析. 在70~94 ℃范围内, 得到成核参数Kg(POM)=5.23×105 K2. 共聚物的Kg和链折叠自由能σe都比均聚物的文献报道值高, 表明PEG链段的存在影响了PLLA的结晶, 使得其成核较均聚物困难.     

不同催化剂作用下聚乳酸/聚碳酸亚丙酯的酯交换反应

选用辛酸亚锡[Sn(Oct)₂]和钛酸四丁酯(TBT)作为聚乳酸(PLA)/聚碳酸亚丙酯(PPC)的酯交换反应催化剂, 研究了溶液条件下单一催化剂及复合催化剂对PLA/PPC酯交换反应的催化作用. 通过对反应产物的分子结构、 热力学及流变学行为进行分析, 结果发现, 无论在单一催化剂还是复合催化剂作用下, PLA与PPC分子间均发生了酯交换反应, 同时伴随着断链反应. 其中, 当Sn(Oct)₂作为单一催化剂或Sn(Oct)₂/TBT作为复合催化剂时, 样品更倾向发生断链反应而非显著的酯交换反应. 进一步分析纯样品在催化剂Sn(Oct)₂或TBT作用下的反应情况, 结果发现, PPC在反应最初阶段以高分子量的分子链断链为主, 且会发生明显的解拉链降解, 从而导致PLA/PPC在等质量比时酯交换反应程度不高, 这为今后更好地研究PLA/PPC酯交换反应提供了思路.     

苯乙烯—丙烯酸钠共聚物改性PET结晶行为的研究

本文用DSC和FT-IR方法研究了PET/苯乙烯-丙烯酸钠共聚物共混体系的相溶性、等温结晶动力学、组成、温度等因素对结晶速率、结晶度等结晶行为的影响,并初步探讨了离聚物对PET的作用。     

Poly(Organophosphazenes): Use in the Improvement of Standard Materials. Application to the Modification of Surface Properties of Poly(Vinyl Alcohol)

Abstract

Modification of surface properties of poly(vinyl alcohol) by grafting of poly(organophosphazenes).     

溶剂诱导的聚乳酸/聚乳酸衍生物共结晶行为

通过溶液浇铸法制备不同组分的左旋聚乳酸(PLLA)和聚(L-2-羟基-3-甲基丁酸)(PL-2H3MB)共混物.运用差示扫描量热仪(DSC)、偏光显微镜(POM)、广角X射线衍射(WAXD)和热重分析仪(TGA)分析共混物的结晶、熔融行为和热稳定性.通过观察到DSC加热曲线中新的熔融峰判断PLLA和PL-2H3MB共晶...     

Detection of Galactose and Lactose by a Poly(Amphiphilic Pyrrole)-Galactose Oxidase Electrode

Abstract

The entrapment of galactose oxidase (GAO) on an electrode surface by coadsorption with a cationic amphiphilic pyrrole and electropolymerization of this pyrrole monomer is described. This simple and rapid procedure for biosensor construction provides very fast responsive and sensitive GAO-based sensors to galactose and lactose. The electrode response is based on the electrochemical detection of enzymically generated hydrogen peroxide. The stability, optimum pH and selectivity of the bioelectrode as well as the characteristics of the immobilized galactose oxidase have been determined. Poly(amphiphilic pyrrole) films have been electrogenerated on the surface of the bioelectrode and the effect of such additional coatings on the biosensor selectivity have also been examined.