A Multifunctional Polymer as an Interfacial Layer for Efficient and Stable Perovskite Solar Cells

Metal-cation defects and halogen-anion defects in perovskite films are critical to the efficiency and stability of perovskite solar cells (PSCs). In this work, a random polymer, poly(methyl methacrylate-co-acrylamide) (PMMA-AM), was synthesized to serve as an interfacial passivation layer for synergistically passivating the under-coordinated Pb²⁺ and anchor the I^- of the [PbI₆]⁴⁻ octahedron. Additionally, the interfacial PMMA-AM passivation layer cannot be destroyed during the hole transport layer deposition because of its low solubility in chlorobenzene. This passivation leads to an enhancement in the open-circuit voltage from 1.12 to 1.22 V and improved stability in solar cell devices, with the device maintaining 95 % of the initial power conversion efficiency (PCE) over 1000 h of maximum power point tracking. Additionally, a large-area solar cell module was fabricated using this approach, achieving a PCE of 20.64 %.     

Self-Driven Prenucleation-Induced Perovskite Crystallization Enables Efficient Perovskite Solar Cells

Perovskite film with high crystal quality is fundamental to achieving high-performance solar cells. A fast nucleation process is crucial to improving the crystallization quality. Here, we propose a self-driven prenucleation strategy to achieve fast nucleation. This is realized through rational solvent design. The key characteristics of different solvents are systematically evaluated. Among them, formamide, with ultra-high dielectric constant, low Gutman donor number, and a high boiling point, is selected as the co-solvent. These unique characteristics render formamide a double-face solvent that is a good solvent for formamidinium iodide (FAI) and CsI while a poor solvent for PbI₂. As a result, formamide induces the self-driven prenucleation of PbI₂-DMSO seeding crystals and accelerates the nucleation, improving the crystalline quality of perovskite film. The efficiency of the hole transport layer-free carbon-based perovskite solar cells is boosted beyond 19 % for the first time.     

Synchronous Elimination of Excess Photoinstable PbI2 and Interfacial Band Mismatch for Efficient and Stable Perovskite Solar Cells

Eliminating the undesired photoinstability of excess lead iodide (PbI₂) in the perovskite film and reducing the energy mismatch between the perovskite layer and heterogeneous interfaces are urgent issues to be addressed in the preparation of perovskite solar cells (PVSCs) by two-step sequential deposition method. Here, the 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) is employed to convert superfluous PbI₂ to more robust 1D EMIMPbI₃ which can withstand lattice strain, while forming an interfacial dipole layer at the SnO₂/perovskite interface to reconfigure the interfacial energy band structure and accelerate the charge extraction. Consequently, the unencapsulated PVSCs device attains a champion efficiency of 24.28 % with one of the highest open-circuit voltage (1.19 V). Moreover, the unencapsulated devices showcase significantly improved thermal stability, enhanced environmental stability and remarkable operational stability accompanied by 85 % of primitive efficiency retained over 1500 h at maximum power point tracking under continuous illumination.     

Recoverable Flexible Perovskite Solar Cells for Next-Generation Portable Power Sources

Flexible perovskite solar cells (FPSCs) with excellent recoverability show a wide range of potential applications in portable power sources. The recoverability of FPSCs requires outstanding bendability of each functional layer, including the flexible substrates, electrodes, perovskite light absorbers, and charge transport materials. This review highlights the recent progress and practical applications of high-recoverability FPSCs, and illustrates the routes toward improvement of the recoverability and environmental stability through the choice of flexible substrates and the preparation of high-quality perovskite films, as well as the optimization of charge-selective contacts. In addition, we explore the intrinsic properties of each functional layer from the physical perspective and analyze how to select suitable functional layers. Additionally, some effective strategies are summarized, including material modification engineering of selective contacts, additives and interface engineering of interlayers, which can release mechanical stress and increase the power-conversion efficiency (PCE) and recoverability of the FPSCs. The challenges of making high-performance FPSCs with long-term stability and high recoverability are discussed. Finally, future applications and perspectives for FPSCs are discussed, aiming to promote more extensive commercialization processes for lightweight and durable FPSCs.     

Molecular Dipole Engineering of Carbonyl Additives for Efficient and Stable Perovskite Solar Cells

Carbonyl functional materials as additives are extensively applied to reduce the defects density of the perovskite film. However, there is still a lack of comprehensive understanding for the effect of carbonyl additives to improve device performance. In this work, we systematically study the effect of carbonyl additive molecules on the passivation of defects in perovskite films. After a comprehensive investigation, the results confirm the importance of molecular dipole in amplifying the passivation effect of additive molecules. The additive with strong molecular dipole possesses the advantages of enhancing the efficiency and stability of perovskite solar cells (PSCs). After optimization, the companion efficiency of PSCs is 23.20 %, and it can maintain long-term stability under harsh conditions. Additionally, a large-area solar cell module-modified DLBA was 20.18 % (14 cm²). This work provides an important reference for the selection and designing of efficient carbonyl additives.     

Perovskite Films Regulation via Hydrogen-Bonded Polymer Network for Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) are considered as a promising photovoltaic technology due to their high efficiency and low cost. However, their long-term stability, mechanical durability, and environmental risks are still unable to meet practical needs. To overcome these issues, we designed a multifunctional elastomer with abundant hydrogen bonds and carbonyl groups. The chemical bonding between polymer and perovskite could increase the growth activation energy of perovskite film and promote the preferential growth of high-quality perovskite film. Owing to the low defect density and gradient energy-level alignment, the corresponding device exhibited a champion efficiency of 23.10 %. Furthermore, due to the formation of the hydrogen-bonded polymer network in the perovskite film, the target devices demonstrated excellent air stability and enhanced flexibility for the flexible PSCs. More importantly, the polymer network could coordinate with Pb²⁺ ions, immobilizing lead atoms to reduce their release into the environment. This strategy paves the way for the industrialization of high-performance flexible PSCs.     

Dual-Interface Engineering in Perovskite Solar Cells with 2D Carbides

Passivating the interfaces between the perovskite and charge transport layers is crucial for enhancing the power conversion efficiency (PCE) and stability in perovskite solar cells (PSCs). Here we report a dual-interface engineering approach to improving the performance of FA_0.85MA_0.15Pb(I_0.95Br_0.05)₃-based PSCs by incorporating Ti₃C₂Cl_x Nano-MXene and o-TB-GDY nanographdiyne (NanoGDY) into the electron transport layer (ETL)/perovskite and perovskite/ hole transport layer (HTL) interfaces, respectively. The dual-interface passivation simultaneously suppresses non-radiative recombination and promotes carrier extraction by forming the Pb−Cl chemical bond and strong coordination of π-electron conjugation with undercoordinated Pb defects. The resulting perovskite film has an ultralong carrier lifetime exceeding 10 μs and an enlarged crystal size exceeding 2.5 μm. A maximum PCE of 24.86 % is realized, with an open-circuit voltage of 1.20 V. Unencapsulated cells retain 92 % of their initial efficiency after 1464 hours in ambient air and 80 % after 1002 hours of thermal stability test at 85 °C.     

Dredging the Charge-Carrier Transfer Pathway for Efficient Low-Dimensional Ruddlesden-Popper Perovskite Solar Cells

Low-dimensional Ruddlesden-Popper (LDRP) perovskites still suffer from inferior carrier transport properties. Here, we demonstrate that efficient exciton dissociation and charge transfer can be achieved in LDRP perovskite by introducing γ-aminobutyric acid (GABA) as a spacer. The hydrogen bonding links adjacent spacing sheets in (GABA)₂MA₃Pb₄I₁₃ (MA=CH₃NH₃⁺), leading to the charges localized in the van der Waals gap, thereby constructing “charged-bridge” for charge transfer through the spacing region. Additionally, the polarized GABA weakens dielectric confinement, decreasing the (GABA)₂MA₃Pb₄I₁₃ exciton binding energy as low as ≈73 meV. Benefiting from these merits, the resultant GABA-based solar cell yields a champion power conversion efficiency (PCE) of 18.73 % with enhanced carrier transport properties. Furthermore, the unencapsulated device maintains 92.8 % of its initial PCE under continuous illumination after 1000 h and only lost 3 % of its initial PCE under 65 °C for 500 h.     

Molecular Bridge on Buried Interface for Efficient and Stable Perovskite Solar Cells

The interface of perovskite solar cells (PSCs) is significantly important for charge transfer and device stability, while the buried interface with the impact on perovskite film growth has been paid less attention. Herein, we use a molecular modifier, glycocyamine (GDA) to build a molecular bridge on the buried interface of SnO₂/perovskite, resulting in superior interfacial contact. This is achieved through the strongly interaction between GDA and SnO₂, which also appreciably modulates the energy level. Moreover, GDA can regulate the perovskite crystal growth, yielding perovskite film with enlarged grain size and absence of pinholes, exhibiting substantially reduced defect density. Consequently, PSCs with GDA modification demonstrate significant improvement of open circuit voltage (close to 1.2 V) and fill factor, leading to an improved power conversion efficiency from 22.60 % to 24.70 %. Additionally, stabilities of GDA devices under maximum power point and 85 °C heat both perform better than the control devices.     

Polycyclic Arenes Dihydrodinaphthopentacene-based Hole-Transporting Materials for Perovskite Solar Cells Application

In this paper, two D-π-D type compounds, C1 and C2 , containing dihydrodinaphthopentacene (DHDNP) as a π-bridge, p-methoxydiphenylamine and p-methoxytriphenylamine groups as the donor groups were synthesized. The four 4-hexylphenyl groups at the sp³-carbon bridges of DHDNP were acquainted with control morphology and improving solubility. The light absorption, energy level, thermal properties, and application as hole-transporting materials in perovskite solar cells of these compounds were fully investigated. The HOMO/LUMO levels and energy gaps of these DHDNP-based molecules are suitable for use as hole-transporting materials in PSCs. The best power conversion efficiencies of the PVSCs based on the C1 and C2 are 15.96% and 12.86%, respectively. The performance of C1 is comparable to that of the reference compound spiro-OMeTAD (16.38%). Compared with spiro-OMeTAD, the C1 -based PVSC device showed good stability, which was slightly decreased to 98.68% of its initial efficiency after 48 h and retained 81% of its original PCE after 334 h without encapsulation. These results reveal the potential usefulness of the DHDNP building block for further development of economical and highly efficient HTMs for PVSCs.     

Iodonium Initiators: Paving the Air-free Oxidation of Spiro-OMeTAD for Efficient and Stable Perovskite Solar Cells

To date, perovskite solar cells (pero-SCs) with doped 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spirobifluorene (Spiro-OMeTAD) hole transporting layers (HTLs) have shown the highest recorded power conversion efficiencies (PCEs). However, their commercialization is still impeded by poor device stability owing to the hygroscopic lithium bis(trifluoromethanesulfonyl)imide and volatile 4-tert-butylpyridine dopants as well as time-consuming oxidation in air. In this study, we explored a series of single-component iodonium initiators with strong oxidability and different electron delocalization properties to precisely manipulate the oxidation states of Spiro-OMeTAD without air assistance, and the oxidation mechanism was clearly understood. Iodine (III) in the diphenyliodonium cation (IP⁺) can accept a single electron from Spiro-OMeTAD and forms Spiro-OMeTAD⋅⁺ owing to its strong oxidability. Moreover, because of the coordination of the strongly delocalized TFSI⁻ with Spiro-OMeTAD⋅⁺ in a stable radical complex, the resulting hole mobility was 30 times higher than that of pristine Spiro-OMeTAD. In addition, the IP-TFSI initiator facilitated the growth of a homogeneous and pinhole-free Spiro-OMeTAD film. The pero-SCs based on this oxidizing HTL showed excellent efficiencies of 25.16 % (certified: 24.85 % for 0.062-cm²) and 20.71 % for a 15.03-cm² module as well as remarkable overall stability.     

Managing Multiple Halide-Related Defects for Efficient and Stable Inorganic Perovskite Solar Cells

Halide-related surface defects on inorganic halide perovskite not only induce charge recombination but also severely limit the long-term stability of perovskite solar cells. Herein, adopting density functional theory calculation, we verify that iodine interstitials (I_i) has a low formation energy similar to that of the iodine vacancy (V_I) and is also readily formed on the surface of all-inorganic perovskite, and it is regarded to function as an electron trap. We screen a specific 2,6-diaminopyridine (2,6-DAPy) passivator, which, with the aid of the combined effects from halogen-N_pyridine and coordination bonds, not only successfully eliminates the I_i and dissociative I₂ but also passivates the abundant V_I. Furthermore, the two symmetric neighboring -NH₂ groups interact with adjacent halides of the octahedral cluster by forming hydrogen bonds, which further promotes the adsorption of 2,6-DAPy molecules onto the perovskite surface. Such synergetic effects can significantly passivate harmful iodine-related defects and undercoordinated Pb²⁺, prolong carrier lifetimes and facilitate the interfacial hole transfer. Consequently, these merits enhance the power-conversion efficiency (PCE) from 19.6 % to 21.8 %, the highest value for this type of solar cells, just as importantly, the 2,6-DAPy-treated CsPbI_3−xBr_x films show better environmental stability.     

Crystallization Regulation by Self-Assembling Liquid Crystal Template Enables Efficient and Stable Perovskite Solar Cells

It is found that the disordered growth of bottom perovskite film deteriorates the buried interface of perovskite solar cells (PSCs), so developing a new material to modify the buried interface for regulating the crystal growth and defect passivation is an effective approach for improving the photovoltaic performance of PSCs. Here, we developed a new ionic liquid crystal (ILC, 1-Dodecyl-3-methylimidazolium tetrafluoroborate) as both crystal regulator and defect passivator to modify the buried interface of PSCs. The high lattice matching between this ILC and perovskite promotes preferential growth of perovskite film along [001] direction, while the oriented ILC with mesomorphic phase has a strong chemical interaction with perovskite to passivate the interface defect, as a result, the modified buried interface exhibits suppressed defects, improved band alignment, reduced nonradiative recombination losses, and enhanced charge extraction. The ILC-modified PSC delivers a power conversion efficiency of 24.92 % and maintains 94 % of the original value after storage in ambient for 3000 h.     

卟啉/酞菁配合物修饰钙钛矿太阳能电池研究

为解决资源短缺和环境污染问题,太阳能电池应用研究引起了广泛的科学关注。在过去的十年间,钙钛矿太阳能电池作为一种新型的电池技术得到了快速发展,逐渐成为目前商业化硅基太阳能电池最有力的竞争对手之一。然而,钙钛矿薄膜在低温溶液制备过程中不可避免地形成缺陷,这些缺陷是严重制约钙钛矿太阳能电池光电转化效率与长期运行稳定性得到进一步提高的主要因素。利用功能化有机分子钝化钙钛矿薄膜表面及晶界处缺陷是提升电池性能及稳定性的有效手段。卟啉/酞菁金属配合物具有良好的稳定性和优异的光电特性,利用卟啉/酞菁金属配合物修饰钙钛矿薄膜是提高钙钛矿太阳能电池性能和稳定性的有效方法之一。本文综述了卟啉/酞菁金属配合物界面调控实现高效稳定钙钛矿太阳能电池组装的研究进展,并对其存在的问题及今后可能的发展方向进行了总结与展望。     

Dimer Acceptor Adopting a Flexible Linker for Efficient and Durable Organic Solar Cells

Organic solar cells (OSCs) have advanced rapidly due to the development of new photovoltaic materials. However, the long-term stability of OSCs still poses a severe challenge for their commercial deployment. To address this issue, a dimer acceptor (dT9TBO) with flexible linker is developed for incorporation into small-molecule acceptors to form molecular alloy with enhanced intermolecular packing and suppressed molecular diffusion to stabilize active layer morphology. Consequently, the PM6 : Y6 : dT9TBO-based device displays an improved power conversion efficiency (PCE) of 18.41 % with excellent thermal stability and negligible decay after being aged at 65 °C for 1800 h. Moreover, the PM6 : Y6 : dT9TBO-based flexible OSC also exhibits excellent mechanical durability, maintaining 95 % of its initial PCE after being bended repetitively for 1500 cycles. This work provides a simple and effective way to fine-tune the molecular packing with stabilized morphology to overcome the trade-off between OSC efficiency and stability.     

Fluorine-Containing Passivation Layer via Surface Chelation for Inorganic Perovskite Solar Cells

Minimizing surface defect is vital to further improve power conversion efficiency (PCE) and stability of inorganic perovskite solar cells (PSCs). Herein, we designed a passivator trifluoroacetamidine (TFA) to suppress CsPbI_3−xBr_x film defects. The amidine group of TFA can strongly chelate onto the perovskite surface to suppress the iodide vacancy, strengthened by additional hydrogen bonds. Moreover, three fluorine atoms allow strong intermolecular connection via intermolecular hydrogen bonds, thus constructing a robust shield against moisture. The TFA-treated PSCs exhibit remarkably suppressed recombination, yielding the record PCEs of 21.35 % and 17.21 % for 0.09 cm² and 1.0 cm² device areas, both of which are the highest for all-inorganic PSCs so far. The device also achieves a PCE of 39.78 % under indoor illumination, the highest for all-inorganic indoor photovoltaic devices. Furthermore, TFA greatly improves device ambient stability by preserving 93 % of the initial PCE after 960 h.     

高效率有机太阳能电池的界面工程研究

有机太阳能电池(OSC)为典型的三明治结构,是以共轭类有机化合物为活性层材料将太阳光转换为电能,通过两个电极输出电流。这些有机物具有来源广、质量轻和可再生等优点,使得有机太阳能电池在清洁新能源领域备受关注。当前研究的焦点仍然是提高电池的光电转换效率,主要通过改善活性层材料、优化器件结构和界面修饰等途径。本文重点介绍了作者课题组在界面工程方面所做的代表性工作,通过引入含磺酸基团或羧酸基团的超支化结构的聚合物阴极修饰层材料,获得了高效的OSCs;合成了新颖的非共轭有机小分子电解质修饰层,制备了高达10.02%效率的单结正型OSCs。此外,还研究了简单的极性溶剂处理,如甲醇能够优化活性层形貌,提高电池器件的性能。     

Two-Second-Annealed 2D/3D Perovskite Films with Graded Energy Funnels and Toughened Heterointerfaces for Efficient and Durable Solar Cells

The 2D/3D perovskite heterostructures have been widely investigated to enhance the efficiency and stability of perovskite solar cells (PSCs). However, rational manipulation of phase distribution and energy level alignment in such 2D/3D perovskite hybrids are still of great challenge. Herein, we successfully achieved spontaneous phase alignment of 2D/3D perovskite heterostructures by concurrently introducing both 2D perovskite component and organic halide additive. The graded phase distribution of 2D perovskites with different n values and 3D perovskites induced favorable energy band alignment across the perovskite film and boosted the charge transfer at the relevant heterointerfaces. Moreover, the 2D perovskite component also acted as a “band-aid” to simultaneously passivate the defects and release the residual tensile stress of perovskite films. Encouragingly, the blade-coated PSCs based on only ≈2 s in-situ fast annealed 2D/3D perovskite films with favorable energy funnels and toughened heterointerfaces achieved promising efficiencies of 22.5 %, accompanied by extended lifespan. To our knowledge, this is the highest reported efficiency for the PSCs fabricated with energy-saved thermal treatment just within a few seconds, which also outperformed those state-of-the-art annealing-free analogues. Such a two-second-in-situ-annealing technique could save the energy cost by up to 99.6 % during device fabrication, which will grant its low-coast implementation.     

Crystallinity Regulation and Defects Passivation for Efficient and Stable Perovskite Solar Cells Using Fully Conjugated Porous Aromatic Frameworks

Fully conjugated porous aromatic frameworks (PAFs) have been constructed through Gilch reaction. The obtained PAFs have rigid conjugated backbones, high specific surface area, and excellent stability. The prepared PAF-154 and PAF-155 have been successfully applied in the perovskite solar cells (PSCs) by doping into the perovskite layer. The champion PSC devices afford a power conversion efficiency of 22.8 % and 22.4 %. It is found that the PAFs can be used as an efficient nucleation template, thus regulating the perovskite crystallinity. Meanwhile, PAFs can also passivate defects and promote carriers transporting in the perovskite film. By the comparative study with their linear counterpart, we unravel that the efficacy of PAFs is highly related to their porous structure and rigid fully conjugated networks. The unencapsulated devices with PAFs doping exhibit outstanding long-term stability, retaining 80 % of their initial efficiencies after half-year storage in ambient conditions.     

Tuning Hole Transport Properties via Pyrrole Derivation for High-Performance Perovskite Solar Cells

Hole transport materials (HTMs) with high hole mobility, good band alignment and ease of fabrication are highly desirable for perovskite solar cells (PSCs). Here, we designed and synthesized novel organic HTMs, named T3, which can be synthesized in high yields with commercially available materials, featuring a substituted pyrrole core and triphenylamine peripheral arms. The capability of functionalization in the final synthetic step provides an efficient way to obtain a variety of T3-based HTMs with tunable energy levels and other properties. Among them, fluorine-substituted T3 (T3-F) exhibits the best band alignment and hole extraction properties, leading to PSCs with outstanding PCEs of 24.85 % and 24.03 % (certified 23.46 %) for aperture areas of 0.1 and 1 cm², respectively. The simple structure and tunable performance of T3 can inspire further optimization for efficient PSCs.