Kinetics of the oxidative coupling of methane in the presence of model catalysts

The kinetics of the oxidative coupling of methane (OCM) in the presence of La/MgO and NaWMn/SiO₂ catalysts in a flow reactor at low reactant conversions was studied. It was found that, in spite of different compositions and properties of the test catalysts, the formation of ethane from methane and ethylene from ethane can be described within the framework of the Mars-van Krevelen redox model in both cases. The rate laws of side reactions, which lead to the formation of carbon oxides, are different from the rate laws of the target reactions of the conversion of methane into ethane and ethane into ethylene. The kinetic parameters required for the numerical simulation of the OCM process were determined for either of the catalysts.     

基于CASSCF参考函数的块相关耦合簇方法对烷烃中单键解离势能面研究

用以完全活化空间自洽场(CASSCF)波函数为参考波函数的块相关耦合簇(BCCC)方法(简称CAS-BCCC)研究了烷烃(甲烷和乙烷)中的单键解离过程的势能面(PES). 与其它理论方法比较的结果表明, 该方法可以对所研究的整个解离势能面给出定量准确的描述.     

Direct observation of surface ethyl to ethane interconversion upon C2H4 hydrogenation over Pt/Al2O3 catalyst by time-resolved FT-IR spectroscopy

Time-resolved FT-IR spectra of ethylene hydrogenation over alumina-supported Pt catalyst were recorded at 25 ms resolution in the temperature range of 323-473 K using various H2 concentrations (1 atm total gas pressure). Surface ethyl species (2870 and 1200 cm(-1)) were detected at all temperatures along with the gas-phase ethane product (2954 and 2893 cm(-1)). The CH3CH2Pt growth was instantaneous on the time scale of 25 ms under all experimental conditions. At 323 K, the decay time of surface ethyl (122 +/- 10 ms) coincides with the rise time of ethane (144 +/- 14 ms). This establishes direct kinetic evidence for surface ethyl as the relevant reaction intermediate. Such a direct link between the temporal behavior of an unstable surface intermediate and the final product in a heterogeneous catalytic system has not been demonstrated before. A fraction (25%) of the asymptotic ethane growth at 323 K is prompt, indicating that there are surface ethyl species that react much faster than the majority of the CH3CH2Pt intermediates. The dispersive kinetics is attributed to the varying strength of interaction of the ethyl species with the Pt surface caused by heterogeneity of the surface environment. At 473 K, the majority of ethyl intermediates are hydrogenated prior to the recording of the first time slice (24 ms), and a correspondingly large prompt growth of ethane is observed. The yield and kinetics of the surface ethylidyne are in agreement with the known spectator nature of this species.     

A theoretical study of the dynamic behavior of alkane hydroxylation by a compound I model of cytochrome P450

Dynamic aspects of alkane hydroxylation mediated by Compound I of cytochrome P450 are discussed from classical trajectory calculations at the B3LYP level of density functional theory. The nuclei of the reacting system are propagated from a transition state to a reactant or product direction according to classical dynamics on a Born-Oppenheimer potential energy surface. Geometric and energetic changes in both low-spin doublet and high-spin quartet states are followed along the ethane to ethanol reaction pathway, which is partitioned into two chemical steps: the first is the H-atom abstraction from ethane by the iron-oxo species of Compound I and the second is the rebound step in which the resultant iron-hydroxo complex and the ethyl radical intermediate react to form the ethanol complex. Molecular vibrations of the C-H bond being dissociated and the O-H bond being formed are significantly activated before and after the transition state, respectively, in the H-atom abstraction. The principal reaction coordinate that can represent the first chemical step is the C-H distance or the O-H distance while other geometric parameters remain almost unchanged. The rebound process begins with the iron-hydroxo complex and the ethyl radical intermediate and ends with the formation of the ethanol complex, the essential process in this reaction being the formation of the C-O bond. The H-O-Fe-C dihedral angle corresponds to the principal reaction coordinate for the rebound step. When sufficient kinetic energy is supplied to this rotational mode, the rebound process should efficiently take place. Trajectory calculations suggest that about 200 fs is required for the rebound process under specific initial conditions, in which a small amount of kinetic energy (0.1 kcal/mol) is supplied to the transition state exactly along the reaction coordinate. An important issue about which normal mode of vibration is activated during the hydroxylation reaction is investigated in detail from trajectory calculations. A large part of the kinetic energy is distributed to the C-H and O-H stretching modes before and after the transition state for the H-atom abstraction, respectively, and a small part of the kinetic energy is distributed to the Fe-O and Fe-S stretching modes and some characteristic modes of the porphyrin ring. The porphyrin marker modes of nu(3) and nu(4) that explicitly involve Fe-N stretching motion are effectively enhanced in the hydroxylation reaction. These vibrational modes of the porphyrin ring can play an important role in the energy transfer during the enzymatic process.     

微波场中乙烷及丙烷气体水合物的分解特性

研究了2.45GHz微波场中I型乙烷水合物及II型丙烷水合物的热激分解过程,基于晶体表面两步分解机制的动力学模型,结合传热传质分析了其分解特性.结果表明:水合物在微波场中的加热分解是一个与实际微波电磁场相互耦合的过程,微波体积加热的特点强化了水合物颗粒表层的传热传质过程,时间累积的热效应增大了水合物晶体破解速率;在120至540W入射功率下,乙烷、丙烷水合物气化速率分别达到0.109-0.400mol·min-·1L-1及0.090-0.222mol·min-1·L-1.在一定范围内增大微波功率可显著提高水合物分解速率,其中乙烷水合物一直处于功率主控区,丙烷水合物更早进入功率和分解动力机制共同控制区.     

MOLECULAR MECHANISM OF DRUG PHOTOSENSITIZATION–II. PHOTOHEMOLYSIS SENSITIZED BY KETOPROFEN

Red blood cell lysis photosensitized by ketoprofen (KPF) was investigated. The photohemolysis was inhibited by butylated hydroxyanisole, reduced glutathione, superoxide dismutase and mannitol, and was unaffected by sodium azide; the presence of oxygen markedly enhanced the lysis. Photohemolysis was also observed under anaerobic conditions. Ketoprofen, irradiated in aqueous buffer solution at pH 7.4, underwent a decarboxylation process via intermediate radicals, leading to the compounds (3-benzoylphenyl)ethane, (3-benzoylphenyl)ethyl hydroperoxide, (3-benzoylphenyl)ethanol and (3-benzoylphenyl)ethanone under aerobic conditions and only to the compound (3-benzoylphenyl)ethane under anaerobic conditions. The four photoproducts showed lytic activity, particularly high for the alcohol and hydroperoxide. The overall results suggest for KPF-photosensitized hemolysis a molecular mechanism involving free radicals, superoxide anion and sensitizer photodegradation products.     

Microkinetic Modeling of Ethane Hydrogenolysis on Metals

The microkinetic analysis of ethane hydrogenolysis in the framework of the Sinfelt-Taylor mechanism is carried out using UBI-QEP data on the energetics of elementary steps. On single-crystalline surfaces of Pd(111), Pt(111), and Ni(111), the reaction predominantly occurs via ethyl formation in which the C-C bond is cleaved. The surface concentration of ethylidyne is very low, and ethyl has the highest concentration among all hydrocarbon fragments. For the conditions studied in this work, the activity in ethane hydrogenolysis increases in the series Pd(111) < Pt(111) < Ni(111). According to the results of kinetic modeling, the reaction occurs via quasi-equilibrium steps of adsorption and dissociation of hydrogen and ethane and further, practically irreversible formation of methane.     

Polyimides containing oxyethylene units

Four aromatic dinitro compounds containing oxyethylene units 1,2-bis(4-nitrophenoxy)ethane, bis(2)-(4-nitrophenoxy)ethyl ether, 1,2-bis(2)-(4-nitrophenoxy)ethoxy)ethane, and bis(2-(2-(4-nitrophenoxy)ethoxy)ethyl) ether were prepared by an aromatic nucleophilic substitution reaction that involved 1-fluoro-4-nitrobenzene and the appropriate oxyethylene glycol. Each of the dinitro compounds could be reduced chemically or catalytically to produce the diamines 1,2-bis(4-aminophenoxy)ethane, bis(2-(4-amino-phenoxy)ethyl ether, 1,2-bis(2-(4-aminophenoxy)ethoxy)ethane, and bis(2-(2-(4-aminophenoxy)ethoxy)ethyl) ether. Polymerization of the diamines was carried out in m-cresol with toluene as an azeotroping agent. Polymides derived from 5,5′-[2,2,2-trifluoro-1-(trifluoromethyl)ethylidene]bis-1,3-isobenzofuradione exhibited good solubility in chlorinated solvents, glass transition temperatures as low as 140°C, as evidenced by viscous flow, and good thermal stability; a 5% weight loss generally occured at greater than 450°C. Isothermal aging studies conducted at 600°F(315°C) for 200 h indicated that weight loss is directly related to oxyalkylene chain length–10% for the shortest and 50% for the longest chain.     

Unusual infrared spectrum of ethane adsorbed by gallium oxide

The present study reports an unusual diffuse reflection Fourier transform (DRIFT) spectrum of ethane adsorbed by gallium oxide. One of the stretching C-H bands in this spectrum with a maximum at 2753 cm(-1) is more than by 100 cm(-1) shifted toward lower frequencies in comparison with gaseous ethane. In addition, the relative intensity of this band is unusually high. This indicates a very strong polarizability of the corresponding chemical bonds resulting from perturbation of ethane by the low coordinated Ga(3+) cations. The assignment of this band to the very strongly perturbed initially fully symmetric nu(1) C-H stretching vibration is confirmed by a DFT modeling of ethane adsorption by the simplest Ga(2)O(3) cluster. The obtained results also indicate heterolytic dissociative adsorption and dehydrogenation of ethane by Ga(3+) Lewis sites at elevated temperature. This is evidenced by the appearance of new IR bands from zinc alkyl fragments and acidic protons followed by decomposition of resulting zinc ethyl species. In parallel, the most intense IR band at lower frequency from the most strongly polarized C-H chemical bond decreased in intensity. The obtained results indicate that these vibrations are involved in subsequent heterolytic dissociative adsorption. The obtained results demonstrate that, similar to the shifts of C-H stretching vibrations to the low-frequency, intensities of IR C-H stretching bands can be also used as an index of chemical activation of adsorbed paraffins via their polarization by the low-coordinated cations.     

Conversion of CO2 and C2H6 to Propanoic Acid over a Au‐Exchanged MCM‐22 Zeolite

Finding novel catalysts for the direct conversion of CO₂ to fuels and chemicals is a primary goal in energy and environmental research. In this work, density functional theory (DFT) is used to study possible reaction mechanisms for the conversion of CO₂ and C₂H₆ to propanoic acid over a gold‐exchanged MCM‐22 zeolite catalyst. The reaction begins with the activation of ethane to produce a gold ethyl hydride intermediate. Hydrogen transfers to the framework oxygen leads then to gold ethyl adsorbed on the Brønsted‐acid site. The energy barriers for these steps of ethane activation are 9.3 and 16.3 kcal mol^?1, respectively. Two mechanisms of propanoic acid formation are investigated. In the first one, the insertion of CO₂ into the Au?H bond of the first intermediate yields gold carboxyl ethyl as subsequent intermediate. This is then converted to propanoic acid by forming the relevant C?C bond. The activation energy of the rate‐determining step of this pathway is 48.2 kcal mol^?1. In the second mechanism, CO₂ interacts with gold ethyl adsorbed on the Brønsted‐acid site. Propanoic acid is formed via protonation of CO₂ by the Brønsted acid and the simultaneous formation of a bond between CO₂ and the ethyl group. The activation energy there is 44.2 kcal mol^?1, favoring this second pathway at least at low temperatures. Gold‐exchanged MCM‐22 zeolite can therefore, at least in principle, be used as the catalyst for producing propanoic acid from CO₂ and ethane.     

乙烷脱氢制乙烯技术研究进展及趋势

在碳中和及全球能源供需版图调整的背景下,乙烯生产原料轻质化成为主流趋势。乙烷脱氢制乙烯技术具有低能耗、低碳排、流程短、收率高、成本低等优势,但目前工业上主要通过乙烷蒸汽裂解法生产乙烯,其他方法工业化生产相对不成熟。本文简述了近年来乙烷脱氢制乙烯技术(包括直接催化脱氢、O₂辅助氧化脱氢、CO₂辅助氧化脱氢、化学链氧化脱氢、催化膜反应器脱氢等)工艺及催化剂的研究现状,同时介绍了其他新兴工艺及催化剂。乙烷脱氢制乙烯技术现阶段面临的挑战不仅在于开发更高效的催化剂及更低能耗的技术,更需要突破乙烷脱氢热力学平衡的限制设计合适的反应路径,其中催化膜反应器脱氢、化学链氧化脱氢工艺都具有非常广阔的市场和工业化发展前景。     

On two alternative mechanisms of ethane activation over ZSM-5 zeolite modified by Zn2+ and Ga1+ cations

The activation of ethane over zinc- and gallium-modified HZSM-5 dehydrogenation catalysts was studied by diffuse reflectance infrared spectroscopy. Hydrocarbon activation on HZSM-5 modified by bivalent Zn and univalent Ga cations proceeds via two distinctly different mechanisms. The stronger molecular adsorption of ethane by the acid-base pairs formed by distantly separated cationic Zn2+ and basic oxygen sites results already at room temperature in strong polarizability of adsorbed ethane and subsequent heterolytic dissociative adsorption at moderate temperatures. In contrast, molecular adsorption of ethane on Ga+ cations is weak. At high temperatures dissociative hydrocarbon adsorption takes place, resulting in the formation of ethyl and hydride fragments coordinating to the cationic gallium species. Whereas in the zinc case a Br?nsted acid proton is formed upon ethane dissociation, decomposition of the ethyl fragment on gallium results in gallium dihydride species and does not lead to Br?nsted acid protons. This difference in alkane activation has direct consequences for hydrocarbon conversions involving dehydrogenation.     

Intensities of IR stretching bands as a criterion of polarization and initial chemical activation of adsorbed molecules in acid catalysis. Ethane adsorption and dehydrogenation by zinc ions in ZnZSM-5 zeolite

A DRIFT study of ethane adsorbed by zinc cations in ZnZSM-5 prepared by chemical reaction of the hydrogen form of the zeolite with zinc vapor at 770 K, or by wet ion exchange, reveals unusual spectra of adsorbed C2H6 species. In addition to the weakly perturbed narrow bands in the region of C-H stretching vibrations, these spectra exhibit a very intense broad IR band with a frequency that is more than 200 cm(-1) lower than those of the C-H stretching vibrations of gaseous or physically adsorbed ethane. The very high relative intensity of this band indicates a very strong polarizability of the corresponding vibrational mode. It is concluded that these strongly polarized vibrations are closely connected with the subsequent heterolytic dissociation of ethane at moderately elevated temperatures, resulting in the formation of acidic hydroxyl groups and zinc ethyl fragments. At higher temperatures, the zinc ethyl fragments decomposed, resulting in the formation of zinc hydrides and ethylene. The unusual DRIFT spectrum of the molecular form of ethane adsorption by zinc cations represents a first example of anisotropy of polarizability of adsorbed molecules, which may provide a new explanation for selectivity of the acid-catalyzed reactions. In this connection, it is suggested to use the relative intensities of IR bands of adsorbed molecules as a reactivity index that is directly connected with chemical activation of adsorbed molecules via their polarization by the active sites.     

4-(4′-Diamino-di-phenyl)-sulfone supported on hollow magnetic mesoporous Fe3O4@SiO2 NPs: As a reusable and efficient catalyst for the synthesis of ethyl 2-amino-5,10-dihydro-5,10-dioxo-4-phenyl-4H benzo[g]chromene-3-carboxylates

4-(4′-diamino-di-phenyl)-sulfone supported on hollow magnetic mesoporous (HMMS) Fe₃O₄@SiO₂ NPs has been used as a novel and efficient catalyst in the preparation of ethyl 2-amino-5,10-dihydro-5,10-dioxo-4-phenyl-4H benzo[g]chromene-3-carboxylates by a simple one-pot three-component reaction of aldehydes, ethyl cyanoacetate and 2-hydroxynaphthalene-1,4-dione under reflux conditions in ethanol. Wide range of products, excellent yields in short times, reusability of the catalyst, low catalyst loading and environmental benignity are some of the important features of this protocol.     

Identification of catalyst surface species during asymmetric platinum-catalysed hydrogenation in a "supercritical" solvent

In situ attenuated total reflection infrared spectroscopy studies during the enantioselective hydrogenation of ethyl pyruvate in "supercritical" ethane over a chirally modified Pt/Al(2)O(3) catalyst show the preferential adsorption of ethyl pyruvate as cis-conformer and indicate a hydrogen bond interaction of this species with the co-adsorbed modifier cinchonidine.     

Identification of volatile products produced during the peroxide vulcanization of poly(vinyl alkyl ethers)

Volatile products are produced during vulcanization of the polymers of vinyl methyl, ethyl, isopropyl and n-butyl ethers with dicumyl peroxide, both in the presence and, absence of added sulfur. They were identified and estimated by gas-liquid chroma tography and mass spectrometry. The principal products formed during the vulcanization of poly(viny1 ethyl ether) with dicumyl peroxide were ethane and acetaldehyde and to a lesser extent methane. The addition of sulfur in the curing recipe resulted in a sharp increase in the proportion of ethyl alcohol, a large increase in methane, and a large decrease in ethane. The formation of these volatile products and the observed changes due to the presence of sulfur in the curing recipe can be accounted for on the basis of side-chain scission of the polymer radicals produced during vulcanization. The length and/or shape of the alkyl group in poly(viny1 alkyl ether) determine the composition of the volatile products. The data are in harmony with the postulated chemistry of vulcanization of these polymers.     

Analysis of band broadening in vibrational high-resolution electron-energy-loss spectra of condensed methane

High-resolution vibrational electron-energy-loss spectra of multilayer condensed films of methane recorded at 20 K show a strong tailing of the vibrational bands that clearly exceeds the instrumental resolution. At low incident electron energy, this tailing is remarkably less important for the dipole-allowed bending vibration (nu(4)) than for other bands. Also, the tailing becomes less pronounced with increasing size of the molecule as demonstrated by spectra of ethane and heptane recorded under the same conditions. Dipole coupling, rotational broadening, and multiple inelastic scattering have been considered as origins of this band broadening. While the first two effects can be excluded, multiple scattering involving a low-frequency phonon band provides a reasonable explanation as demonstrated by simulations of the spectrum of methane using a classical two-stream model. A lower phonon frequency in the cases of the larger molecules is held responsible for the better resolved vibrational signals in the spectra of ethane and heptane.     

Autocatalytic gas-phase dehydrogenation of ethane

Homogeneous gas-phase pyrolysis of ethane by continuous CO₂ laser irradiation was used in our experiments for bulk heating of the reaction mixture. Laser energy was absorbed by ethylene, the main product of ethane dehydrogenation, and transferred to the reaction medium via collisional relaxation. A mechanism of ethane dehydrogenation is suggested to describe the pyrolysis process. The mechanism is autocatalytic in respect of ethylene and includes ethane?Cethylene interaction with the formation of methyl and propyl radicals. Rate constants of elementary reactions, selectivity, and yields of pyrolysis products were determined. The composition of ethane dehydrogenation products determined in the experiments was substantially different from the calculated thermodynamic equilibrium composition.     

低碳烷烃与二氧化碳催化转化研究进展

页岩气革命为低碳经济发展提供了重要契机.在低碳烷烃(甲烷和乙烷)催化转化过程中,以二氧化碳作为氧化剂参与反应,通过C-H键的选择性活化可将页岩气转化为优质化工原料——合成气和乙烯,是一种低碳烷烃转化与二氧化碳资源化利用的工艺路线.本文总结了近年来甲烷干重整与乙烷和二氧化碳反应中与C-H键活化相关的研究进展,分析了甲烷干...     

Energetics, transition states, and intrinsic reaction coordinates for reactions associated with O(3P) processing of hydrocarbon materials

Electronic structure calculations based on multiconfiguration wave functions are used to investigate a set of archetypal reactions relevant to O(3P) processing of hydrocarbon molecules and surfaces. These include O(3P) reactions with methane and ethane to give OH plus methyl or ethyl radicals, O(3P) + ethane to give CH3O + CH3, and secondary reactions of the OH product radical with ethane and the ethyl radical. Geometry optimization is carried out with CASSCF/cc-pVTZ for all reactions, and with CASPT2/cc-pVTZ for O(3P) + methane/ethane. Single-point energy corrections are applied with CASPT2, CASPT3, and MRCI + Q with the cc-pVTZ and cc-pVQZ basis sets, and the energies extrapolated to the complete basis set limit (CBL). Where comparison of computed barriers and energies of reaction with experiment is possible, the agreement is good to excellent. The best agreement (within experimental error) is found for MRCI + Q/CBL applied to O(3P) + methane. For the other reactions, CASPT2/CBL and MRCI + Q/CBL predictions differ from experiment by 1-5 kcal/mol for 0 K enthalpies of reaction, and are within 1 kcal/mol of the best-estimate experimental range of 0 K barriers for O(3P) + ethane and OH + ethane. The accuracy of MRCI + Q/CBL is limited mainly by the quality of the active space. CASPT2/CBL barriers are consistently lower than MRCI + Q/CBL barriers with identical reference spaces.