The Origin of Solvent Deprotonation in LiI-added Aprotic Electrolytes for Li-O2 Batteries

LiI and LiBr have been employed as soluble redox mediators (RMs) in electrolytes to address the sluggish oxygen evolution reaction kinetics during charging in aprotic Li-O₂ batteries. Compared to LiBr, LiI exhibits a redox potential closer to the theoretical one of discharge products, indicating a higher energy efficiency. However, the reason for the occurrence of solvent deprotonation in LiI-added electrolytes remains unclear. Here, by combining ab initio calculations and experimental validation, we find that it is the nucleophile that triggers the solvent deprotonation and LiOH formation via nucleophilic attack, rather than the increased solvent acidity or the elongated C−H bond as previously suggested. As a comparison, the formation of in LiBr-added electrolytes is found to be thermodynamically unfavorable, explaining the absence of LiOH formation. These findings provide important insight into the solvent deprotonation and pave the way for the practical application of LiI RM in aprotic Li-O₂ batteries.     

Entropic Contributions to Sodium Solvation and Solvent Stabilization upon Electrochemical Sodium Deposition from Diglyme and Propylene Carbonate Electrolytes

The formation of an appropriate solid electrolyte interphase (SEI) at the anode of a sodium battery is crucially dependent on the electrochemical stability of solvent and electrolyte at the redox potential of Na/Na⁺ in the respective system. In order to determine entropic contributions to the relative stability of the electrolyte solution, we measure the reaction entropy of Na metal deposition for diglyme (DG) and propylene carbonate (PC) based electrolyte solutions by electrochemical microcalorimetry at single electrodes. We found a large positive reaction entropy for Na⁺ deposition in DG of Δ_R 234 J mol⁻¹ K⁻¹ (c.f.: Δ_R 83 J mol⁻¹ K⁻¹), which signals substantial entropic destabilization of Na⁺ in DG by about 0.73 eV, thus increasing the stability of solvent and electrolyte relative to Na⁺ reduction. We attribute this strong entropic destabilization to a highly negative solvation entropy of Na⁺, due to the low dielectric constant and high freezing entropy of DG.     

Lithium-ion Mobility in Li6B18(Li3N) and Li Vacancy Tuning in the Solid Solution Li6B18(Li3N)1−x(Li2O)x

All-solid-state batteries are promising candidates for safe energy-storage systems due to non-flammable solid electrolytes and the possibility to use metallic lithium as an anode. Thus, there is a challenge to design new solid electrolytes and to understand the principles of ion conduction on an atomic scale. We report on a new concept for compounds with high lithium ion mobility based on a rigid open-framework boron structure. The host–guest structure Li₆B₁₈(Li₃N) comprises large hexagonal pores filled with Li₇N] strands that represent a perfect cutout from the structure of α-Li₃N. Variable-temperature ⁷Li NMR spectroscopy reveals a very high Li mobility in the template phase with a remarkably low activation energy below 19 kJ mol⁻¹ and thus much lower than pristine Li₃N. The formation of the solid solution of Li₆B₁₈(Li₃N) and Li₆B₁₈(Li₂O) over the complete compositional range allows the tuning of lithium defects in the template structure that is not possible for pristine Li₃N and Li₂O.     

An Artificial Single Molecular Channel Showing High Chloride Transport Selectivity and pH-Responsive Conductance

Inspired by the unique structure and function of the natural chloride channel (ClC) selectivity filter, we present herein the design of a ClC-type single channel molecule. This channel displays high ion transport activity with half-maximal effective concentration, EC₅₀, of 0.10 μM, or 0.075 mol % (channel molecule to lipid ratio), as determined by fluorescent analysis using lucigenin-encapsulated vesicles. Planar bilayer lipid membrane conductance measurements indicated an excellent Cl⁻/K⁺ selectivity with a permeability ratio P /P up to 12.31, which is comparable with the chloride selectivity of natural ClC proteins. Moreover, high anion/anion selectivity (P /P =66.21) and pH-dependent conductance and ion selectivity of the channel molecule were revealed. The ClC-like transport behavior is contributed by the cooperation of hydrogen bonding and anion–π interactions in the central macrocyclic skeleton, and by the existence of pH-responsive terminal phenylalanine residues.     

Ion Transport in Glyme- and Sulfolane-Based Highly Concentrated Electrolytes

Highly concentrated electrolytes (HCEs) have a similarity to ionic liquids (ILs) in high ionic nature, and indeed some of HECs are found to behave like an IL. HCEs have attracted considerable attention as prospective candidates for electrolyte materials in future lithium secondary batteries owing to their favorable properties both in the bulk and at the electrochemical interface. In this study, we highlight the effects of the solvent, counter anion, and diluent of HCEs on the Li⁺ ion coordination structure and transport properties (e. g., ionic conductivity and apparent Li⁺ ion transference number measured under anion-blocking conditions, ). Our studies on dynamic ion correlations unveiled the difference in the ion conduction mechanisms in HCEs and their intimate relevance to values. Our systematic analysis of the transport properties of HCEs also suggests the need for a compromise to simultaneously achieve high ionic conductivity and high values.     

Blended Conjugated Host and Unconjugated Dopant Polymers Towards N-type All-Polymer Conductors and High-ZT Thermoelectrics

N-Type thermoelectrics typically consist of small molecule dopant+polymer host. Only a few polymer dopant+polymer host systems have been reported, and these have lower thermoelectric parameters. N-type polymers with high crystallinity and order are generally used for high-conductivity ( ) organic conductors. Few n-type polymers with only short-range lamellar stacking for high-conductivity materials have been reported. Here, we describe an n-type short-range lamellar-stacked all-polymer thermoelectric system with highest of 78 S⁻¹, power factor (PF) of 163 μW m⁻¹ K⁻², and maximum Figure of merit (ZT) of 0.53 at room temperature with a dopant/host ratio of 75 wt%. The minor effect of polymer dopant on the molecular arrangement of conjugated polymer PDPIN at high ratios, high doping capability, high Seebeck coefficient (S) absolute values relative to , and atypical decreased thermal conductivity ( ) with increased doping ratio contribute to the promising performance.     

Polymer Chainmail: Steric Hindrance and Charge Compensation of Anion-Doped PEDOT to Boost Stress Deformation of Compressible Supercapacitor

Conducting polymers with high theoretical capacitance and deformability are among the optimal candidates for compressible supercapacitor electrode materials. However, achieving both mechanical and electrochemical stabilities in a single electrode remains a great challenge. To address this issue, the “Polymer Chainmail” is proposed with reversible deformation capability and enhances stability because of the steric hindrance and charge compensation effect of doped anions. As a proof of concept, four common anions are selected as dopants for Poly(3,4-ethylenedioxythiophene) (PEDOT), and their effects on the adsorption and diffusion of H⁺ on PEDOT are verified using density functional theory calculations. Owing to the film formation effect, the doped PEDOT/nitrogen-doped carbon foam exhibits good mechanical properties. Furthermore, the composite demonstrates excellent rate performance and stability due to suitable anion doping. This finding provides new insights into the preparation of electrochemically stable conductive polymer-based compressible electrode materials.     

Quantum Nuclear Delocalization and its Rovibrational Fingerprints

Quantum mechanics dictates that nuclei must undergo some delocalization. In this work, emergence of quantum nuclear delocalization and its rovibrational fingerprints are discussed for the case of the van der Waals complex . The equilibrium structure of is planar and T-shaped, one He atom solvating the quasi-linear He−H⁺−He core. The dynamical structure of , in all of its bound states, is fundamentally different. As revealed by spatial distribution functions and nuclear densities, during the vibrations of the molecule the solvating He is not restricted to be in the plane defined by the instantaneously bent chomophore, but freely orbits the central proton, forming a three-dimensional torus around the chromophore. This quantum delocalization is observed for all vibrational states, the type of vibrational excitation being reflected in the topology of the nodal surfaces in the nuclear densities, showing, for example, that intramolecular bending involves excitation along the circumference of the torus.     

Linking Composition,Structure and Thickness of CoOOH layers to Oxygen Evolution Reaction Activity by Correlative Microscopy

The role of β-CoOOH crystallographic orientations in catalytic activity for the oxygen evolution reaction (OER) remains elusive. We combine correlative electron backscatter diffraction/scanning electrochemical cell microscopy with X-ray photoelectron spectroscopy, transmission electron microscopy, and atom probe tomography to establish the structure–activity relationships of various faceted β-CoOOH formed on a Co microelectrode under OER conditions. We reveal that ≈6 nm β-CoOOH(01 0), grown on [ 0]-oriented Co, exhibits higher OER activity than ≈3 nm β-CoOOH(10 3) or ≈6 nm β-CoOOH(0006) formed on [02 - and [0001]-oriented Co, respectively. This arises from higher amounts of incorporated hydroxyl ions and more easily reducible Co^III−O sites present in β-CoOOH(01 0) than those in the latter two oxyhydroxide facets. Our correlative multimodal approach shows great promise in linking local activity with atomic-scale details of structure, thickness and composition of active species, which opens opportunities to design pre-catalysts with preferred defects that promote the formation of the most active OER species.     

Supramolecular Barrel-Rosette Ion Channel Based on 3,5-Diaminobenzoic Acid for Cation-Anion Symport

The structural tropology and functions of natural cation-anion symporting channels have been continuously investigated due to their crucial role in regulating various physiological functions. To understand the physiological functions of the natural symporter channels, it is vital to develop small-molecule-based biomimicking systems that can provide mechanistic insights into the ion-binding sites and the ion-translocation pathways. Herein, we report a series of bis((R)-(−)-mandelic acid)-linked 3,5-diaminobenzoic acid based self-assembled ion channels with distinctive ion transport ability. Ion transport experiment across the lipid bilayer membrane revealed that compound 1 b exhibits the highest transport activity among the series, and it has interesting selective co-transporting functions, i.e., facilitates K⁺/ClO₄⁻ symport. Electrophysiology experiments confirmed the formation of supramolecular ion channels with an average diameter of 6.2±1 Å and single channel conductance of 57.3±1.9 pS. Selectivity studies of channel 1 b in a bilayer lipid membrane demonstrated a permeability ratio of , , and indicating the higher selectivity of the channel towards KClO₄ over KCl salt. A hexameric assembly of a trimeric rosette of 1 b was subjected to molecular dynamics simulations with different salts to understand the supramolecular channel formation and ion selectivity pattern.     

Inorganic Solid-State Nonlinear Optical Switch with a Linearly Tunable Tc Spanning a Wide Temperature Range

Nonlinear optical (NLO) switch materials that turn on/off second-harmonic generation (SHG) at a phase transition temperature (T_c) are promising for applications in the fields of photoswitching and optical computing. However, precise control of T_c remains challenging, mainly because a linearly tunable T_c has not been reported to date. Herein, we report a unique selenate, tetragonal P 2₁c [Ag(NH₃)₂]₂SeO₄ with a=b=8.5569(2) Å and c=6.5208(2) Å that exhibits a strong SHG intensity (1.3×KDP) and a large birefringence (Δn_obv.=0.08). This compound forms a series of isostructural solid-solution crystals [Ag(NH₃)₂]₂S_xSe_1−xO₄ (x=0–1.00) that exhibit excellent NLO switching performance and an unprecedented linearly tunable spanning 430 to 356 K. The breaking of localized hydrogen bonds between SeO₄²⁻ and the cation triggers a phase transition accompanied by hydrogen bond length changes with increasing x and a linear change in the enthalpy .     

A Long Cycle‐Life High‐Voltage Spinel Lithium‐Ion Battery Electrode Achieved by Site‐Selective Doping

Spinel LiNi_0.5Mn_1.5O₄ (LNMO) is a promising cathode candidate for the next‐generation high energy‐density lithium‐ion batteries (LIBs). Unfortunately, the application of LNMO is hindered by its poor cycle stability. Now, site‐selectively doped LNMO electrode is prepared with exceptional durability. In this work, Mg is selectively doped onto both tetrahedral (8a) and octahedral (16c) sites in the Fd m structure. This site‐selective doping not only suppresses unfavorable two‐phase reactions and stabilizes the LNMO structure against structural deformation, but also mitigates the dissolution of Mn during cycling. Mg‐doped LNMOs exhibit extraordinarily stable electrochemical performance in both half‐cells and prototype full‐batteries with novel TiNb₂O₇ counter‐electrodes. This work pioneers an atomic‐doping engineering strategy for electrode materials that could be extended to other energy materials to create high‐performance devices.     

Multiple Triplet Metal-Centered Jahn-Teller Isomers Determine Temperature-Dependent Luminescence Lifetimes in [Ru(bpy)3]2+

Understanding the factors that determine the luminescence lifetime of transition metal compounds is key for applications in photocatalysis and photodynamic therapy. Here we show that for (bpy = 2,2’-bipyridine), the generally accepted idea that emission lifetimes can be controlled optimizing the energy barrier from the emissive triplet metal-to-ligand charge-transfer (³MLCT) state to the thermally-activated triplet metal-centered (³MC) state or the energy gap between both states is a misconception. Further, we demonstrate that considering a single relaxation pathway determined from the minimum that is lowest in energy leads to wrong temperature-dependent emission lifetimes predictions. Instead, we obtain excellent agreement with experimental temperature-dependent lifetimes when an extended kinetic model that includes all the pathways related to multiple Jahn–Teller isomers and their effective reaction barriers is employed. These concepts are essential to correctly design other luminescent transition metal complexes with tailored emission lifetimes based on theoretical predictions.     

Broad Dual Emission by Codoping Cr3+ (d→d) and Bi3+ (s→p) in Cs2Ag0.6Na0.4InCl6 Double Perovskite

A phosphor emitting both white light and broad near-infrared (NIR) radiation can simultaneously provide visual inspection and early signs of rotting of food products. The broad NIR emission is absorbed by the vibrational overtones of water molecules present in food items, providing the non-invasive image contrast to assess the food freshness. Here we design a phosphor, namely, Cr³⁺-Bi³⁺-codoped Cs₂Ag_0.6Na_0.4InCl₆, that simultaneously emit warm white light and broad NIR (1000 nm) radiation with quantum yield 27 %. This dual emitter is designed by combining the features of s²-electron (Bi³⁺) and d³-electron (Cr³⁺) doping in a weak crystal field of the halide perovskite host. excitation of Bi³⁺, using a commercial 370 nm ultraviolet light-emitting-diodes (UV-LED), yields both the emissions. A fraction of the excited Bi³⁺ dopants emit the warm white light, and the other fraction transfers its energy non-radiatively to Cr³⁺. Then the Cr³⁺ de-excites emitting broad NIR emission. Temperature dependent (6.4–300 K) photoluminescence in combination with Tanabe-Sugano diagram show that the Cr³⁺ experiences a weak crystal field ( =2.2), yielding the NIR emission. As a proof of concept, we fabricated a panel containing 122 phosphor-converted LEDs, demonstrating its capability to inspect food products.     

Modular and Selective Arylation of Aryl Germanes (C−GeEt3) over C−Bpin,C−SiR3 and Halogens Enabled by Light‐Activated Gold Catalysis

Selective C –C couplings are powerful strategies for the rapid and programmable construction of bi‐ or multiaryls. To this end, the next frontier of synthetic modularity will likely arise from harnessing the coupling space that is orthogonal to the powerful Pd‐catalyzed coupling regime. This report details the realization of this concept and presents the fully selective arylation of aryl germanes (which are inert under Pd⁰/Pd^II catalysis) in the presence of the valuable functionalities C?BPin, C?SiMe₃, C?I, C?Br, C?Cl, which in turn offer versatile opportunities for diversification. The protocol makes use of visible light activation combined with gold catalysis, which facilitates the selective coupling of C?Ge with aryl diazonium salts. Contrary to previous light‐/gold‐catalyzed couplings of Ar–N₂⁺, which were specialized in Ar–N₂⁺ scope, we present conditions to efficiently couple electron‐rich, electron‐poor, heterocyclic and sterically hindered aryl diazonium salts. Our computational data suggest that while electron‐poor Ar–N₂⁺ salts are readily activated by gold under blue‐light irradiation, there is a competing dissociative deactivation pathway for excited electron‐rich Ar–N₂⁺, which requires an alternative photo‐redox approach to enable productive couplings.     

Double‐Gyroid Nanostructure Formation by Aggregation‐Induced Atropisomerization and Co‐Assembly of Ionic Liquid‐Crystalline Amphiphiles

We report a new molecular‐design principle for creating double‐gyroid nanostructured molecular assemblies based on atropisomerization. Ionic amphiphiles containing two imidazolium rings close to each other were designed and synthesized. NMR data revealed that the rotation of the imidazolium rings is restricted, with an activation energy as high as 63 kJ mol^?1 in DMSO‐d₆ solution (DFT prediction for a model compound in the vacuum: 90–100 kJ mol^?1). Due to the restricted rotation, the amphiphiles feature “double” atropisomeric axes in their ionic segments and form three stable atropisomers: meso, R, and S. These isomers co‐organize into ‐type bicontinuous cubic liquid‐crystalline mesophases through nanosegregation of the ionic and non‐ionic parts. Considering the intrinsic characteristic of ‐type bicontinuous cubic structures that they are composed of intertwined right‐ and left‐handed single gyroids, we propose that the simultaneous presence of both R‐ and S‐atropisomers is an important contributor to the formation of double‐gyroid structures.     

17O Hyperfine Spectroscopy Reveals Hydration Structure of Nitroxide Radicals in Aqueous Solutions

The hydration structure of nitroxide radicals in aqueous solutions is elucidated by advanced ¹⁷O hyperfine (hf) spectroscopy with support of quantum chemical calculations and MD simulations. A piperidine and a pyrrolidine-based nitroxide radical are compared and show clear differences in the preferred directionality of H-bond formation. We demonstrate that these scenarios are best represented in ¹⁷O hf spectra, where in-plane coordination over -type H-bonding leads to little spin density transfer on the water oxygen and small hf couplings, whereas -type perpendicular coordination generates much larger hf couplings. Quantitative analysis of the spectra based on MD simulations and DFT predicted hf parameters is consistent with a distribution of close solvating water molecules, in which directionality is influenced by subtle steric effects of the ring and the methyl group substituents.     

Metal Organic Framework Cubosomes

We demonstrate a general strategy for the synthesis of ordered bicontinuous-structured metal organic frameworks (MOFs) by using polymer cubosomes (PCs) with a double primitive structure (Im m symmetry) as the template. The filling of MOF precursors in the open channel of PCs, followed by their coordination and removal of the template, generates MOF cubosomes with a single primitive topology (Pm m) and average mesopore diameters of 60–65 nm. Mechanism study reveals that the formation of ZIF-8 cubosomes undergoes a new MOF growth process, which involves the formation of individual MOF seeds in the template, their growth and eventual fusion into the cubosomes. Their growth kinetics follows the Avrami equation with an Avrami exponent of n=3 and a growth rate of k=1.33×10⁻⁴, indicating their fast 3D heterogeneous growth mode. Serving as a bioreactor, the ZIF-8 cubosomes show high loading of trypsin enzyme, leading to a high catalytic activity in the proteolysis of bovine serum albumin.