Protein reconstitution and 3D domain swapping

The native structures of proteins are governed by a large number of non-covalent interactions yielding a high specificity for the native packing of structural elements. This allows for the reconstitution of proteins from disconnected polypeptide fragments. The specificity for the native arrangement also enables interchange of structural elements with another identical protein chain resulting in dimers with swapped segments. Proteins are not static structures, but open up repetitively on a timescale of minutes to years depending on the identity of the protein and solution conditions. The open protein may self-close and return to the native state, or it may close with another polypeptide chain leading to 3D domain swapping. The term describes two or more protein molecules swapping identical domains or smaller secondary structure elements. The non-covalent intra-molecular interactions between domains in the monomer are thus broken and restored in the oligomer by identical inter-molecular contacts. This review will discuss 3D domain swapping in relation to protein reconstitution and fibril formation. Examples of reconstituted and domain-swapped proteins will be given. The physiological benefits of 3D domain swapping will be discussed, as well as its role in the evolution of proteins and pathology.     

An oligopeptide containing the C-terminal sequence of RNase a has a potent RNase a binding property

We demonstrate that an oligopeptide containing the C-terminal sequence of RNase A binds to RNase A in a stoichiometric and site-specific manner. Our observations are consistent with the interaction found in the major domain-swapped RNase A dimer, so that the peptide binding may be promoted through the swapping with the C-terminal beta-sheet of RNase A. Because the design of a protein-binding peptide is much simpler than other methods such as the combinatorial method, we propose that investigation using an oligopeptide may be of general application to domain swapping in proteins as well as for the development of an oligopeptide tool that specifically binds to a target protein.     

Intramolecular cross-linking experiments on cytochrome c and ribonuclease A using an isotope multiplet method.

Mass spectral analysis of tryptic digests of cross-linked proteins offers considerable promise as a simple technique to probe protein structure and study protein-protein interactions. We describe the use of a 1:1 mixture of isotopically labeled and unlabeled cross-linkers, disuccinimidyladipate (DSA) and dimethyladipimidate (DMA), to enhance visualization of cross-linked peptides in a tryptic digest. Optimized intramolecular reactions of cytochrome c and ribonuclease A (RNase A) with DSA yielded an average of two cross-links per protein molecule. After digestion of the cross-linked cytochrome c with trypsin and analysis by liquid chromatography/mass spectrometry (LC/MS) and matrix-assisted laser desorption/ionization (MALDI), eight modified peptides, five cross-linked and two end-capped, were detected by virtue of their doublet character. An eighth modified peptide's identity remained ambiguous because of its inability to fragment. The lysine-lysine distance constraints obtained are discussed in the context of the known NMR and X-ray structures of cytochrome c. Analysis of cross-linked RNase A by LC/MS and MALDI yielded nine modified peptides, four of which were modified twice, as indicated by the isotopic triplets. Although seven of these peptides contained cross-links, few distance constraints were gained due to the fact that the cross-linked products were variations of modification of the same three lysine residues.     

Domains in bovine seminal ribonuclease

Bovine seminal ribonuclease is the only pancreatic-type ribonuclease to possess a dimeric structure: the two identical subunits are covalently linked by two disulfide bridges. Actually, the protein exists in two different dimeric structures owing to the possibility of swapping the N-terminal α-helical segments: the swapped MxM dimer, and the non-swapped M=M dimer. The thermal denaturation of the two separated forms is investigated by differential scanning calorimetry. The process is reversible and can be represented by two sequential two-state transitions, indicating the presence of two domains in BS-RNase, regardless of the swapping phenomenon. Inspection of the structural models leads to the tentative identification of an external domain and a core domain, the latter more stable.     

Structural study of AOT reverse micelles containing native or modified proteins: influence of surfactant-enzyme interaction

In this paper, the solubilization effect of different proteins in sodium di(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles is studied. From results obtained with chemically modified proteins, it is shown that the nature of the surfactant-protein interaction controls the intermicellar potential, not the location of the proteins within the droplets. By binding hydrophobic molecules onto the surface of -chymotrypsin and ribonuclease, we force these hydrophobic enzymes to interact, via hydrophobic forces, with the droplet's interface. Small-angle X-ray scattering (SAXS) and conductivity measurements suggest that modification of the intermicellar potential is not required when the enzymes are modified. Conversely, electrostatic forces play an important role, as is observed using cytochrome c and its derivatives differing in their superficial charge.     

Diversification of catalytic function in a synthetic family of chimeric cytochrome p450s

We report initial characterization of a synthetic family of more than 3000 cytochrome P450s made by SCHEMA recombination of 3 bacterial CYP102s. A total of 16 heme domains and their holoenzyme fusions with each of the 3 parental reductase domains were tested for activity on 11 different substrates. The results show that the chimeric enzymes have acquired significant functional diversity, including the ability to accept substrates not accepted by the parent enzymes. K-means clustering analysis of the activity data allowed the enzymes to be classified into five distinct groups based on substrate specificity. The substrates can also be grouped such that one can be a "surrogate" for others in the group. Fusion of a functional chimeric heme domain with a parental reductase domain always reconstituted a functional holoenzyme, indicating that key interdomain interactions are conserved upon reductase swapping.     

Local stability of Rhodobacter capsulatus cytochrome c 2 probed by solution phase hydrogen/deuterium exchange and mass spectrometry

The hydrogen/deuterium exchange kinetics of Rhodobacter capsulatus cytochrome c2 have been determined using mass spectrometry. As expected, the relative domain stability was generally similar to that of the cytochrome c2 structural homolog, horse heart cytochrome c, but we were able to find evidence to support the presence of a second, small beta-sheet not found in the horse cytochrome, which stabilizes a structural region dominated by Omega loops. Importantly, we find that the so-called hinge region, comprised of 15 amino acids, which include the methionine sixth heme ligand (M96), is destabilized on oxidation, and this destabilization is propagated to a portion of the second Omega loop, most likely through perturbation of two hydrogen bonds that couple these two domains in the three dimensional structure. The mutation of a lysine at position 93 to proline amplifies the destabilization observed on oxidation of the wild-type cytochrome c2 and results in further destabilization observed in regions 52-60, 75-82, and 83-97. This suggests that hydrogen bond interactions involving two bound waters, the T94 hydroxyl, the front heme propionate and the Y75 hydroxyl, are significantly compromised upon mutation. In summary, these observations are consistent with the approximately 20-fold increase in the movement of the hinge away from the heme face in the oxidized cytochrome c2 as determined by ligand binding kinetics. Thus, H/D exchange kinetics can be used to identify relatively subtle structural features and at least in some cases facilitate the understanding of the structural basis of the dynamic properties of proteins.     

Infrared Multiphoton Dissociation Enables Top-Down Characterization of Membrane Protein Complexes and G Protein-Coupled Receptors

Membrane proteins are challenging to analyze by native mass spectrometry (MS) as their hydrophobic nature typically requires stabilization in detergent micelles that are removed prior to analysis via collisional activation. There is however a practical limit to the amount of energy which can be applied, which often precludes subsequent characterization by top-down MS. To overcome this barrier, we have applied a modified Orbitrap Eclipse Tribrid mass spectrometer coupled to an infrared laser within a high-pressure linear ion trap. We show how tuning the intensity and time of incident photons enables liberation of membrane proteins from detergent micelles. Specifically, we relate the ease of micelle removal to the infrared absorption of detergents in both condensed and gas phases. Top-down MS via infrared multiphoton dissociation (IRMPD), results in good sequence coverage enabling unambiguous identification of membrane proteins and their complexes. By contrasting and comparing the fragmentation patterns of the ammonia channel with two class A GPCRs, we identify successive cleavage of adjacent amino acids within transmembrane domains. Using gas-phase molecular dynamics simulations, we show that areas prone to fragmentation maintain aspects of protein structure at increasing temperatures. Altogether, we propose a rationale to explain why and where in the protein fragment ions are generated.     

Construction and in vitro analysis of a new bi-modular polypeptide synthetase for synthesis of N-methylated acyl peptides

BACKGROUND: Many active peptides are synthesized by nonribosomal peptide synthetases (NRPSs), large multimodular enzymes. Each module incorporates one amino acid, and is composed of two domains: an activation domain that activates the substrate amino acid and a condensation domain for peptide-bond formation. Activation domains sometimes contain additional activities (e.g. N-methylation or epimerization). Novel peptides can be generated by swapping domains. Exchange of domains containing N-methylation activity has not been reported, however. RESULTS: The actinomycin NRPS was used to investigate domain swapping. The first two amino acids of actinomycin are threonine and valine. We replaced the valine activation domain of module 2 with an N-methyl valine (MeVal) activation domain. The recombinant NRPS (AcmTmVe) catalyzes the formation of threonyl-valine. In the presence of S-adenosyl-methionine, valine was converted to MeVal but subsequent dipeptide formation was blocked. When acyl-threonine (the natural intermediate) was present at module 1, formation of acyl-threonine-MeVal occurred. The epimerization domain of AcmTmVe was impaired. CONCLUSIONS: A simple activation domain can be replaced by one with N-methylation activity. The same condensation domain can catalyze peptide-bond formation between N-methyl and nonmethylated amino acids. Modification of the upstream amino acid (i.e. acylation of threonine), however, was required for condensation with MeVal. Steric hindrance reduces chemical reactivity of N-methyl amino acids - perfect substrate positioning may only be achieved with acylated threonine. Loss of the epimerase activity of AcmTmVe suggests N-methyltransferase and epimerase domains, not found together naturally, are incompatible.     

Aminoacyl-SNACs as small-molecule substrates for the condensation domains of nonribosomal peptide synthetases

BACKGROUND: Nonribosomal peptide synthetases (NRPSs) are large multidomain proteins that catalyze the formation of a wide range of biologically active natural products. These megasynthetases contain condensation (C) domains that catalyze peptide bond formation and chain elongation. The natural substrates for C domains are biosynthetic intermediates that are covalently tethered to thiolation (T) domains within the synthetase by thioester linkages. Characterizing C domain substrate specificity is important for the engineered biosynthesis of new compounds. RESULTS: We synthesized a series of aminoacyl-N-acetylcysteamine thioesters (aminoacyl-SNACs) and show that they are small-molecule substrates for NRPS C domains. Comparison of rates of peptide bond formation catalyzed by the C domain from enterobactin synthetase with various aminoacyl-SNACs as downstream (acceptor) substrates revealed high selectivity for the natural substrate analog L-Ser-SNAC. Comparing L- and D-Phe-SNACs as upstream (donor) substrates for the first C domain from tyrocidine synthetase revealed clear D- versus L-selectivity. CONCLUSIONS: Aminoacyl-SNACs are substrates for NRPS C domains and are useful for characterizing the substrate specificity of C domain-catalyzed peptide bond formation.     

Improved in-gel approaches to generate peptide maps of integral membrane proteins with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

This paper reports studies of in-gel digestion procedures to generate MALDI-MS peptide maps of integral membrane proteins. The methods were developed for the membrane domain of the mannitol permease of E. coli. In-gel digestion of this domain with trypsin, followed by extraction of the peptides from the gel, yields only 44% sequence coverage. Since lysines and arginines are seldomly found in the membrane-spanning regions, complete tryptic cleavage will generate large hydrophobic fragments, many of which are poorly soluble and most likely contribute to the low sequence coverage. Addition of the detergent octyl-beta-glucopyranoside (OBG), at 0.1% concentration, to the extraction solvent increases the total number of peptides detected to at least 85% of the total protein sequence. OBG facilitates the recovery of hydrophobic peptides when they are SpeedVac dried during the extraction procedure. Many of the newly recovered peptides are partial cleavage products. This seems to be advantageous since it generates hydrophobic fragments with a hydrophilic solubilizing part. In-gel CNBr cleavage resulted in 5-10-fold more intense spectra, 83% sequence coverage, fully cleaved fragments and no effect of OBG. In contrast to tryptic cleavage sites, the CNBr cleavage sites are found in transmembrane segments; cleavage at these sites generates smaller hydrophobic fragments, which are more soluble and do not need OBG. With the results of both cleavages, a complete sequence coverage of the membrane domain of the mannitol permease of E. coli is obtained without the necessity of using HPLC separation. The protocols were applied to two other integral membrane proteins, which confirmed the general applicability of CNBr cleavage and the observed effects of OBG in peptide recovery after tryptic digestion.     

Aqueous two-phase systems containing self-associating block copolymers. Partitioning of hydrophilic and hydrophobic biomolecules.

A series of proteins and one membrane-bound peptide have been partitioned in aqueous two-phase systems consisting of micelle-forming block copolymers from the family of Pluronic block copolymers as one polymer component and dextran T500 as the other component. The Pluronic molecule is a triblock copolymer of the type PEO-PPO-PEO, where PEO and PPO are poly(ethylene oxide) and poly(propylene oxide), respectively. Two different Pluronic copolymers were used, P105 and F68, and the phase diagrams were determined at 30 degrees C for these polymer systems. Since the temperature is an important parameter in Pluronic systems (the block copolymers form micellar-like aggregates at higher temperatures) the partitioning experiments were performed at 5 and 30 degrees C, to explore the effect of temperature-triggered micellization on the partitioning behaviour. The temperatures correspond to the unimeric (single Pluronic chain) and the micellar states of the P105 polymer at the concentrations used. The degree of micellization in the F68 system was lower than that in the P105 system, as revealed by the phase behaviour. A membrane-bound peptide, gramicidin D, and five different proteins were partitioned in the above systems. The proteins were lysozyme, bovine serum albumin, cytochrome c, bacteriorhodopsin and the engineered B domain of staphylococcal protein A, named Z. The Z domain was modified with tryptophan-rich peptide chains in the C-terminal end. It was found that effects of salt dominated over the temperature effect for the water-soluble proteins lysozyme, bovine serum albumin and cytochrome c. A strong temperature effect was observed in the partitioning of the integral membrane protein bacteriorhodopsin, where partitioning towards the more hydrophobic Pluronic phase was higher at 30 degrees C than at 5 degrees C. The membrane-bound peptide gramicidin D partitioned exclusively to the Pluronic phase at both temperatures. The following trends were observed in the partitioning of the Z protein. (i) At the higher temperature, insertion of tryptophan-rich peptides increased the partitioning to the Pluronic phase. (ii) At the lower temperature, lower values of K were observed for ZT2 than for ZT1.     

The effect of feed composition on the behavior of chemically selective displacement systems

In this paper we examine whether adding a more retained protein to the feed will mitigate displacer–protein interactions in the column, thus affecting the displacement modality that occurs (chemically selective vs. traditional displacement chromatography). STD-NMR experiments were carried out to probe displacer–protein interactions for the chemically selective displacer chloroquine diphosphate and the results indicated that this displacer only had measurable interactions with the protein α-chymotrypsinogen A. For a two component feed mixture containing ribonuclease A and α-chymotrypsinogen A, the separation resulted in the displacement of ribonuclease A, with the more hydrophobic α-chymotrypsinogen A remaining on the column. On the other hand, when the experiment was repeated with cytochrome c added to the feed, all three feed proteins were displaced. Column simulations indicated that the combination of sample self-displacement occurring during the introduction of the feed, along with the dynamics of the initial displacement process at the column inlet was responsible for this behavior. These results indicate that for this class of hydrophobic-based selective displacers, in order for the protein to be selectively retained, the protein should be the most strongly retained feed component.     

Thermodynamic basis for promiscuity and selectivity in protein-protein interactions: PDZ domains, a case study

Like other protein-protein interaction domains, PDZ domains are involved in many key cellular processes. These processes often require that specific multiprotein complexes be assembled, a task that PDZ domains accomplish by binding to specific peptide motifs in target proteins. However, a growing number of experimental studies show that PDZ domains (like other protein-protein interaction domains) can engage in a variety of interactions and bind distinct peptide motifs. Such promiscuity in ligand recognition raises intriguing questions about the molecular and thermodynamic mechanisms that can sustain it. To identify possible sources of promiscuity and selectivity underlying PDZ domain interactions, we performed molecular dynamics simulations of 20 to 25 ns on a set of 12 different PDZ domain complexes (for the proteins PSD-95, Syntenin, Erbin, GRIP, NHERF, Inad, Dishevelled, and Shank). The electrostatic, nonpolar, and configurational entropy binding contributions were evaluated using the MM/PBSA method combined with a quasi-harmonic analysis. The results revealed that PDZ domain interactions are characterized by overwhelmingly favorable nonpolar contributions and almost negligible electrostatic components, a mix that may readily sustain promiscuity. In addition, despite the structural similarity in fold and in recognition modes, the entropic and other dynamical aspects of binding were remarkably variable not only across PDZ domains but also for the same PDZ domain bound to distinct ligands. This variability suggests that entropic and dynamical components can play a role in determining selectivity either of PDZ domain interactions with peptide ligands or of PDZ domain complexes with downstream effectors.     

A localized specific interaction alters the unfolding pathways of structural homologues

Reductive unfolding studies of proteins are designed to provide information about intramolecular interactions that govern the formation (and stabilization) of the native state and about folding/unfolding pathways. By mutating Tyr92 to G, A, or L in the model protein, bovine pancreatic ribonuclease A, and through analysis of temperature factors and molecular dynamics simulations of the crystal structures of these mutants, it is demonstrated that the markedly different reductive unfolding rates and pathways of ribonuclease A and its structural homologue onconase can be attributed to a single, localized, ring-stacking interaction between Tyr92 and Pro93 in the bovine variant. The fortuitous location of this specific stabilizing interaction in a disulfide-bond-containing loop region of ribonuclease A results in the localized modulation of protein dynamics that, in turn, enhances the susceptibility of the disulfide bond to reduction leading to an alteration in the reductive unfolding behavior of the homologues. These results have important implications for folding studies involving topological determinants to obtain folding/unfolding rates and pathways, for protein structure-function prediction through fold recognition, and for predicting proteolytic cleavage sites.     

Recognition of solvent exposed protein surfaces using anthracene derived receptors

A new class of receptor is described that can selectively bind to the solvent exposed surface of proteins such as cytochrome c and lysozyme with low micromolar affinity over cytochrome c551, alpha-lactalbumin, myoglobin and RNase A, under physiologically relevant conditions (5 mM phosphate, pH 7.4). The use of anthracene as a hydrophobic scaffold allows the receptor to act as a selective chemosensor via fluorescence quenching or FRET. The study reveals that co-operative electrostatic interactions over a large surface area dominate binding. Further investigations reveal that the receptor binds to the solvent exposed heme edge of cytochrome c inhibiting its reaction with small reducing agents and validating the strategy for the disruption of protein function.     

Proteo-dendrimers designed for complementary recognition of cytochrome c: dendrimer architecture toward nanoscale protein complexation

"Proteo-dendrimers" in which polyanionic hepta(glutamic acids), fluorescent zinc porphyrinate cores, hydrophilic polyether surfaces, and nonpeptide hydrophobic dendrons are combined, were developed as a new series of synthetic receptors for protein recognition. They have polyanionic "patch" structures on their surfaces and undergo complementary electrostatic interactions with a positively charged cytochrome c patch, as observed in biological protein-protein recognition systems. Stability constants of the resulting supramolecular complexes were determined in phosphate buffer (pH 7) by monitoring the fluorescence quenching of the zinc porphyrinates. These proteo-dendrimer receptors exhibited higher affinities with cytochrome c proteins in aqueous solutions than with biological cytochrome b5. Furthermore, they effectively blocked complexation of biological cytochrome b5 with cytochrome c, indicating that the proteo-dendrimers and cytochrome b5 similarly occupy the polycationic patch of cytochrome c.     

Thermodynamics of thermal denaturation of ribonuclease A and cytochrome c in the presence of 1,1,1,3,3,3-hexafluoro-2-propanol

The thermal denaturation of ribonuclease A and cytochrome c has been studied by differential scanning calorimetry (d.s.c.) and u.v.-visible spectrophotometry in the presence of 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) at pH  =  5.5 and pH  =  4.0, respectively. The quantitative thermodynamic parameters accompanying the thermal transitions from native to denatured state have been evaluated. The results of the reversible thermal denaturations have been fitted with a two-state native-to-denatured mechanism. A comparison has been made of the relative effect of HFIP on the thermal stability of ribonuclease A and cytochrome c. It has been observed that the denaturation capacity of HFIP tends more towards cytochrome c compared with ribonuclease A. The results have been explained on the basis of a fine balance between the preferential exclusion and binding that take place during the course of the denaturation reaction and the structuring of water around the groups of the protein exposed upon denaturation. Using the thermodynamic data obtained from calorimetric and spectroscopic measurements, we have calculated the changes in preferential solvation of ribonuclease A and cytochrome c upon heat denaturation. It is observed that the preferential solvation of these two proteins is specific, indicating that the solvation mechanism is not the same for them.     

MS2Assign,automated assignment and nomenclature of tandem mass spectra of chemically crosslinked peptides

In a previous report (Young et al., Proc. Natl. Acad. Sci. U.S.A. 2000, 97, 5802-5806), we provided a proof-of-principle for fold recognition of proteins using a homobifunctional amine-specific chemical crosslinking reagent in combination with mass spectrometry analysis and homology modeling. In this current work, we propose a systematic nomenclature to describe the types of peptides that are generated after proteolysis of crosslinked proteins, their fragmentation by tandem mass spectrometry, and an automated algorithm for MS/MS spectral assignment called "MS2Assign." Several examples are provided from crosslinked peptides and proteins including HIV-integrase, cytochrome c, ribonuclease A, myoglobin, cytidine 5-monophosphate N-acetylneuraminic acid synthetase, and the peptide thymopentin. Tandem mass spectra were obtained from various crosslinked peptides using post source decay MALDI-TOF and collision induced dissociation on a quadrupole-TOF instrument, along with their automated interpretation using MS2Assign. A variety of possible outcomes are described and categorized according to the number of modified lysines and/or peptide chains involved, as well as the presence of singly modified (dead-end) lysine residues. In addition, the proteolysis and chromatographic conditions necessary for optimized crosslinked peptide recovery are presented.     

Methodology for the immobilization of enzymes onto mesoporous materials

Cytochrome c and xylanase were adsorbed onto two mesoporous materials, SBA-15 (a pure silicate) and MSE (an organosilicate), with very similar physical properties but differing chemical compositions. A methodical order was developed whereby the influences of surface area, pore size, extent of order, particle size, surface potentials, isoelectric points, pH, and ionic strength on immobilization were explored. In silico studies of cytochrome c and xylanase were conducted before any immobilization experiments were carried out in order to select compatible materials and probe the interactions between the adsorbents and the mesoporous silicates. The stabilities of the mesoporous materials at different pH values and their isoelectric points and zeta potentials were determined. Electrostatic attraction dominated protein interactions with SBA-15, while weaker hydrophobic interactions are more prominent with MSE for both cytochrome c and xylanase. The ability of the immobilized protein/enzyme to withstand leaching was measured, and activity tests and thermostability experiments were conducted. Cytochrome c immobilized onto SBA-15 showed resistance to leaching and an enhanced activity compared to free protein. The immobilized cytochrome c was shown to have higher intrinsic activity but lower thermostability than free cytochrome c. From an extensive characterization of the surface properties of the silicates and proteins, we describe a systematic methodology for the adsorption of proteins onto mesoporous silicates. This approach can be utilized in the design of a solid support for any protein.