Separation of twenty underivatized essential amino acids by capillary zone electrophoresis with contactless conductivity detection

Twenty underivatized essential amino acids were separated using capillary zone electrophoresis and consequently detected with contactless conductivity detection (CCD). A simple acidic background electrolyte (BGE) containing 2.3 M acetic acid and 0.1% w/w hydroxyethylcellulose (HEC) allowed the electrophoretic separation and sensitive detection of all 20 essential amino acids in their underivatized cationic form. The addition of HEC to the BGE suppressed both, electroosmotic flow and analyte adsorption on the capillary surface resulting in an excellent migration time reproducibility and a very good analyte peak symmetry. Additionally, the HEC addition significantly reduced the noise and long-term fluctuations of the CCD baseline. The optimized electrophoretic separation method together with the CCD was proved to be a powerful technique for determination of amino acid profiles in various natural samples, like beer, yeast, urine, saliva, and herb extracts.     

Determination of Phenols,Inorganic Anions,and Carboxylic Acids in Kraft Black Liquors by Capillary Electrophoresis

Two methods are presented for the quantitative capillary electrophoretic (CE) determination of phenolic lignin degradation compounds as well as of inorganic anions and organic acids in Kraft black liquors. Important phenolic lignin degradation compounds can be rapidly separated by co-electroosmotic CE after acidification of the liquors and subsequent extraction of the compounds with chloroform. A capillary electrophoretic separation of phenolic compounds is performed by using a phosphate/borate electrolyte system and UV detection at 214 nm. In addition, a HPLC method using a gradient with water, methanol, and acetic acid is also developed. Inorganic ions which are of importance to the pulping process can be determined by simply diluting the black liquors after sampling and subsequent analysis with a chromate electrolyte system and indirect UV detection at 185 nm. In addition, the concentration of low molecular aliphatic carboxylic acids can be determined simultaneously within the same run. By method optimization it is possible to separate the anions within one minute and, at the same time, to increase the resolution of the solutes. The electrolyte systems for the CE separations were optimized by varying the pH value and by adding organic solvents. Short separation times are obtained by adding a polycationic EOF modifier (hexadimethrine bromide) to the electrolyte which reverses the electroosmotic flow. A migration of the anionic analytes in the same direction as the electroosmotic flow is thus established.     

Determination of chloroacetic acids in water by capillary zone electrophoresis with field-amplified sample injection

A simple and sensitive method has been developed for the determination of chloroacetic acids and acetic acid in water using capillary zone electrophoresis under modified electroosmotic flow with indirect UV detection. Potassium hydrogen phthalate at pH 5.40 was used as background electrolyte (BGE), and hexadecyltrimethylammonium bromide was used as electroosmotic flow modifier. Field-amplified sample injection (FASI) method was used to enhance the sensitivity. Results showed that the limit of detection for these analytes was enhanced more than 15-fold and the repeatabilities were good with relative standard deviations (RSDs %) of migration time and corrected peak areas being below 0.33%, 4.45% (intra-day) and 0.87%, 9.67% (inter-day), respectively. An off-line liquid–liquid extraction (LLE) process with methyl tert-butyl ether was carried out to detect these compounds in water samples. The dissociation constants of acetic acid and monochloroacetic acid (MCA) were determined with two methods and the results obtained were consistent with the reference values.     

电解质溶液组成对低分子量阴离子毛细管电泳分离的影响

研究了毛细管电泳间接紫外检测法测定低分子量阴离子时电解质溶液中背景电解质、电渗流改性剂、ｐＨ值、有机溶剂等对分离的影响；比较了铬酸根、邻苯二甲酸根、苯甲酸根３种背景离子对不同迁移率阴离子分离的影响，并对间接紫外检测的定量基础及灵敏度进行了讨论；考察了３种不同长链烷基三甲基季铵盐电渗流改性剂浓度对阴离子迁移时间和电渗迁移率的影响，结果表明电渗流的改性效果与烷基链的长度有关；ｐＨ影响阴离子的有效迁移率     

Determination of organic acids in air by capillary electrophoresis and ion-exclusion chromatography

Summary A capillary electrophoretic (CE) method for the determination of organic acids in the low ppm range is described. The buffer consisted of 5 mM 2,6-pyridinedicarboxylic acid and 0.5 mM cetyltrimethylammonium bromide, pH 5.6. The former served as background electrolyte for indirect UV detection at 200 nm, whereas the latter was used to reverse electroosmotic flow. In <5 min 8 low molecular mass organic acids (oxalic, formic, malonic, glutaric, glycolic, acetic, lactic and propanoic) and two inorganic acids (hydrochloric and sulphuric) were separated. Detection limits for anions tested were 0.04 mg L⁻¹ (lactic acid) to 0.6 mg L⁻¹ (malonic acid). The method was applied to the determination of organic acids in air samples. The CE results when compared with ion-exclusion chromatography (IEC) agreed well. The use of electrokinetic injection in CE proved beneficial for preconcentration of organic acids in real samples. Using electrokinetic injection, preconcentration factors ranging from 14 (hydrochloric acid) to 3 (propanoic acid) were obtained. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Simultaneous Determination of Organic Acids in Wine Samples by Capillary Electrophoresis and UV Detection: Optimization with Five Different Background Electrolytes

A simple technique is described for the routine capillary electrophoretic determination of organic acids in wine samples. Several aromatic and non‐aromatic compounds, including phthalic acid, benzoic acid, sorbic acid, boric acid, and phosphate, were evaluated as background electrolytes in order to obtain the highest resolution and detection sensivity. Factors that affect capillary electrophoretic separation such as the concentration and pH of the background electrolyte (BGE), the concentration of the electroosmotic flow modifier (EOF), and methanol addition to the electrolyte were investigated systematically. Tartaric, malic, succinic, acetic, and lactic acids were determined simultaneously in approximately six minutes using an electrolyte containing 3 mM phosphate and 0.5 mM myristyltrimethylammonium bromide (MTAB) as electroosmotic flow modifier at pH 6.5. This method is quantitative, with recoveries in the 90–102% range and linear up to 50 mg L^–1. The precision is better than 1% and the procedure shows the appropriate sensibility, with detection limits between 0.015 and 0.054 mg L^–1. The proposed method was successfully employed for the determination of organic acids in wine samples by direct sample injection after appropriate dilution and filtration.     

Simultaneous determination of inorganic anions and organic acids in amine solutions for sour gas treatment by capillary electrophoresis with indirect UV detection

A new CE method has been developed for the simultaneous determination of selected inorganic anions (bromide, chloride, thiosulfate, nitrite, nitrate, sulfate, thiocyanate, fluoride and phosphate) and organic acids (oxalic, malonic, formic, tartric, acetic, glycolic, propionic, butyric and cyclohexanoic) in amine solutions from sour gas treatment units. An electrolyte composed of 10 mM trimellitic acid, 200 mM Tris (pH 9.0), 0.1% polyvinyl alcohol provides a satisfactory separation of all analytes of interest. The electroosmotic flow is reversed by using hexadimethrine bromide as a semi-permanent positively charged coating, making the electrolyte free of additive. Indirect UV detection at 240 nm is used because of the weak absorbing properties of most of analytes. The addition of 1% diethanolamine in standard mixtures permits to better preserve them, inhibiting potential degradation processes, especially for thiosulfate. The quantification is performed using internal standardization, by which molybdate is used as internal standard. Moreover, the use of relative migration times and the excellent repeatabilities obtained allow unambiguous identification of analytes in real samples by comparison with standard mixture. It has been shown that no significant matrix effect came from the presence of 30% diethanolamine in amine solution samples and the developed method was characterized in terms of calibration linearity and accuracy using recovery tests. In short, the developed method allows the simultaneous and rapid determination, in difficult matrices, of numerous inorganic anions and organic acids characterized by a large range of electrophoretic mobilities.     

A new method for quantitative determination of two uronic acids by CZE with direct UV detection

A new method using capillary zone electrophoresis was developed for the rapid quantification of two common uronic acids, galacturonic acid and glucuronic acid, based on utilization of an alkaline background electrolyte with reversed electroosmotic flow (EOF) within 16 min. The method relies on in‐capillary reaction and direct UV detection at the wavelength 270 nm. The optimum electrolyte solution was prepared of 130 mm sodium hydroxide, 36 mm disodium hydrogen phosphate dihydrate and 0.5 mm cetyltrimethylammonium bromide. EOF was reversed to detect uronic acids and to improve the separation of neutral sugars. The established method was validated and the results showed good linearity, high precision and satisfactory sensitivity. The newly developed method was successfully applied to analyze galacturonic acid and glucuronic acid content in Forsythia suspensa polysaccharides. The method is fast since only sample hydrolysis and dilution are required in the sample preparation. Copyright © 2010 John Wiley & Sons, Ltd.     

Parameters influencing separation and detection of anions by capillary electrophoresis

Electrolyte composition is critical in optimizing separation and detection of ions by capillary electrophoresis. The parameters which must be considered when designing an electrolyte system for capillary electrophoresis include electrophoretic mobility of electrolyte constituents and analytes, detection mode, and compatibility of electrolyte constituents with one another. An electrolyte system based on pyromellitic acid is well suited for use with indirect photometric detection, and provides excellent separations of anions. The ability to modify the electrophoretic mobility of pyromellitic acid as a function of ph provides flexibility in matching electrophoretic mobilities of analytes. Additionally, the use of alkyl amines as electroosmotic flow modifiers allows the rapid separation of anions by reversing the direction of electroosmotic flow in a fused-silica capillary. The optimization of a capillary electrophoresis electrolyte for anion analysis is also discussed in terms of pH, ionic strength and applied voltage. The effect of organic solvent on separation selectivity is also discussed.     

Separation of native amino acids at low pH by capillary electrophoresis

Amino Acids are cations at low PH and can be readily separated by capillarty electrophoresis provided an alkanesulfonic acid is added to the elecrolyte carrier. Formation of a Positive net charge on the bare fused-silica surface at low PH was confirmed by measurement of an anodic electroosmotic flow. The addition of ethanesulfonic acid or octanesulfonic acid to the electrolyte carrier causes a reversal of the EOF. A mechanism is proposed in which the alkanesulfonic acid adsorbs to the positively-charged capillary wall through electrostatci attraction. Adsorption of a second molecule of alkanesulfonate by hudrophobic attraction to the carbon chain forms a negatively-charge coating on the capillary wall. The alkanesuflfonate also imparts selectivety to the system by participation in ionpairing interactions with the native amino acids to improve resolution. The CE separation of a mixture of the twenty common amino acids at PH 2.8 with direct absorabance detection at 185 nm resulted in 17 amino acid peals in 20 minutes with a 30 KV applied voltage. The effect of several variables was studied including electrolyte carrieres containing different alkanesulfonic acids, the influence of PH, applied voltage, and concentration of electrolyte carrier.     

Titanium dioxide coated surfaces for capillary electrophoresis and capillary electrochromatography

The potential of titanium dioxide coatings to control the electroosmotic flow and to affect the migration behavior of analytes in capillary electrophoresis and open-tubular capillary electrochromatography was evaluated. The inner wall of a fused-silica capillary was applied with a solution of a titanium peroxo complex, followed by heating at an elevated temperature. The resultant product was ascertained to be titanium dioxide in a crystalline form of anatase by the results of Fourier transform-infrared spectrometry (FT-IR), X-ray photoelectron spectroscopy, and Raman spectroscopy. The capillary thus made had anodic or cathodic electroosmotic flow, depending on the pH and composition of the background electrolyte used. The titanium dioxide surface of the capillary was readily modified by a silanizing reagent. The performance of the titanium dioxide surfaces with or without chemical modifications was examined with inorganic anions, neutral compounds and peptides.     

The effect of conditioning of fused-silica capillaries on their electrophoretic performance

In CE practice, conditioning of the capillary tube with strong base, acid, or both in sequence, has been recognized as essential to obtain reasonable precision in electroosmotic mobility (EOM), and consequently, in the migration times of analytes. This report focuses on the comparative study of three different approaches for capillary conditioning: etching with HF, etching with NaOH, and leaching with HCl after NaOH treatment. EOM-based measurements, including the hysteresis effect that characterizes the dependence of EOM with pH, were used to evaluate the conditioned silica surface. Additionally, indirect inspection of the conditioned surface was carried out by examining the electrophoretic profile of the cationic probe Ru(bpy)(3) (2+), known to strongly interact with the ionized silica surface while displaying no significant acid-base activity. It was shown that, once conditioned and prior to any CE measurement, extensive rinse of the capillary with the running electrolyte at high flow rate was essential to attain relatively rapid re-equilibration of the tube with the fluid. Insufficient rinse with the running electrolyte would result in negatively biased EOM measurements and significant drift in migration times. It was also established that relatively high flow rates of 1 M NaOH conditioning solution (4-5 column volumes per minute) was required to attain capillaries with reproducible electrophoretic performance within a reasonable conditioning time (typically, 1 h). In addition to relatively more extensive rehydroxylation of the silica surface, evidenced by the highest EOM values obtained, the sequential use of NaOH-etching and HCl-leaching provided better precision than HF-etching or NaOH-etching alone.     

Capillary electrophoretic chiral separation of Cinchona alkaloids using a cyclodextrin selector

A new capillary electrophoretic method for the chiral separation of four major Cinchona alkaloids (quinine/quinidine and cinchonine/cinchonidine) was developed using heptakis-(2,6-di-O-methyl)-beta-cyclodextrin as the chiral selector. The inner walls of the separation capillary were modified with a thin polyacrylamide layer, which substantially reduced the electroosmotic flow and improved the chiral resolution and the reproducibility of the migration time of the analytes. Various operation parameters were optimised, including the pH, the capillary temperature, the concentration of the background electrolyte, and the concentration of the chiral selector. Baseline separation of the two diastereomer pairs was achieved in 12 minutes in ammonium acetate background electrolyte pH 5.0 with addition of cyclodextrin in a concentration of 3 mM or higher.     

Speciation of inorganic and methylated arsenic compounds by capillary zone electrophoresis with indirect UV detection. Application to the analysis of alkali extracts of As2S2 (realgar) and As2S3 (orpiment)

A capillary zone electrophoresis (CZE) method with indirect UV detection was developed to simultaneously separate inorganic and organic arsenic compounds including arsenite (iAsIII), arsenate (iAsV), monomethylarsonate and dimethylarsenic acid (DMAV). 2,6-Pyridinedicarboxylic acid (PDC) and n-hexadecyltrimethylammonium hydroxide (CTAOH) were selected to compose a background electrolyte (BGE), where PDC was used as chromophore and CTAOH functioned as electroosmotic flow (EOF) modifier to reduce/eliminate EOF. The choice of detection wavelength, the optimization of BGE pH, and effects of applied electric field strength and temperature on separation were further investigated. The limits of detection for the targeted analytes were between 0.19 and 0.23 ppm as molecule. Good linearity of more than three orders of magnitude was obtained. Repeatability of migration times and peaks areas were 0.8-1.7 and 3.4-6.9% R.S.D.; whereas reproducibility were 1.2-2.2 and 3.6-7.1% R.S.D., respectively. The established CZE method was then applied to analyze the alkali extracts of realgar (As2S2) and orpiment (As2S3). The main components in both alkali extracts were identified to be iAsIII and iAsV.     

Determination of morphine, oripavine and pseudomorphine using capillary electrophoresis with acidic potassium permanganate chemiluminescence detection

A simple and robust capillary electrophoresis chemiluminescence detection system for the determination of morphine, oripavine and pseudomorphine is described, based upon the reaction of these analytes with acidic potassium permanganate in the presence of sodium polyphosphate. The reagent solution was contained in a quartz detection cell which also held both the capillary and the anode. The resultant chemiluminescence was monitored directly using a photomultiplier tube mounted flush against the base of the detection cell. To ensure that no migration of the permanganate anion occurred, the anode was placed at the detector end whilst the electroosmotic flow was reversed by the addition of hexadimethrine bromide (0.001% m/v) to the electrolyte. The three analytes were separated counter to the electroosmotic flow via their interaction with alpha-cyclodextrin. The methodology realised detection limits (3 x S/N) of 2.5 x 10(-7) M for both morphine and oripavine and 5 x 10(-7) M for pseudomorphine. The relative standard deviations of the migration times and the peak heights for the three analytes ranged from 0.6 up to 0.8% and from 1.5 up to 2.1%, respectively.     

毛细管反相电色谱法分离行为的研究

对乙睛-水-磷酸二氢销体系毛细管反相电色谱分离行为进行了研究。采用柱上紫外检测,在75μmi.d.×30cm的毛细管ODS（3μm）填充柱上获得了小于2.0的折合培板高度。同时还研究了乙睛的比例、电解质的浓度和电场强度等因素对电渗流和往效的影响。     

Determination of amino acids in tobacco samples by capillary electrophoresis/indirect absorbance detection with isolation of the electrolysis compartment and p-Aminobenzoic acid as a background electrolyte.

A fast, convenient and sensitive method of capillary zone electrophoresis (CZE) and indirect UV detection was proposed for the determination of 16 amino acids. p-Aminobenzoic acid (PAB) was selected as a background electrolyte (BGE). An isolated cell included a BGE buffer part and an electrode buffer one, which were jointed with a glass frit. The isolated cell can prevent PAB from the electrode reaction and improve the stability of the detection baseline. The separation conditions of amino acids were investigated, such as different BGEs, BGE concentration, buffer pH and electroosmotic flow (EOF) modifiers. Under the selected separation conditions, 14 amino acid peaks could be separated in 12 min. The detection limits of the amino acids were in the range of 1.7 - 4.5 micromol/L. The isolated cell is suitable for reagents reacting on the electrodes in capillary electrophoresis. The proposed method has been successfully applied to the determination of the amino acids in tobacco samples.     

Determination of peroxides by capillary zone electrophoresis with amperometric detection

The combination of cathodic amperometric detection with capillary zone electrophoresis is demonstrated to be a versatile method for the quantification of organic and inorganic peroxides. A gold microelectrode, polarized at -600 mV against an Ag/AgCl reference electrode, is placed at the end of the capillary. Since the electroosmotic flow purges the detector electrode from oxygen, no degassing of the detector cell or the sample is necessary. With an injection volume of ca. 1 nl, hydrogen peroxide, peroxosulfate, peroxy alkanoic acids and the hydroperoxides of linoleic acid can be detected down to 10 micromol/l. Separation of the isomeric hydroperoxides of the unsaturated fatty acids is achieved by addition of beta-cyclodextrin to the electrolyte.     

Separation and Determination of Amino Acids by CE Using 1-Butyl-3-methylimidazolium-Based Ionic Liquid as Background Electrolyte

Capillary electrophoresis using 1-butyl-3-methylimidazolium tetrafluoroborate as background electrolyte for the separation and determination of 11 amino acids was studied. Several parameters, such as ionic liquid concentration, pH of background electrolyte and applied voltage, were optimized. Amino acids were derived with Sanger’s reagent (2,4-dinitrofluorobenzene) and the detection was performed by an ultraviolet absorption detector at 360 nm. Under selected conditions, 11 amino acids were completely separated within 16 min. The RSD values of integrated areas and migration times are <3.03 and <1.64%, respectively. The electroosmotic flow can be influenced by imidazolium cation, and the association between the imidazolium cation and the derived amino acids plays an important role in the separation mechanism. This method not only provides an approach for the separation and determination of amino acids, but is also an extension of the ionic liquid application to capillary electrophoresis.     

聚合离子液体用作毛细管电泳背景电解质添加剂快速高效分离5种核苷类化合物

将聚乙烯基-3-乙基咪唑溴盐离子液体用作毛细管电泳背景电解质添加剂,利用聚合离子液体的阳离子聚合物性质静电吸附到毛细管内表面,成功实现电渗流的有效反转,建立了共电渗流模式下5种核苷类化合物分离的新方法。考察了聚合离子液体浓度、pH值等因素对电渗流的影响。在优化实验条件下,3.1 min内实现了对5种核苷类化合物的快速高效分离;将该方法分别与不加添加剂和加入离子液体单体后的体系进行对比,结果表明,该方法大大缩短了5种核苷类化合物的分析时间,提高了分析效率,最高柱效达95万/m塔板数,分析物的迁移时间RSD均不高于0.38%。该方法简单、快速、重复性好,具有很好的应用前景。