Hafnium trifluoromethanesulfonate (hafnium triflate) as a highly efficient catalyst for chemoselective thioacetalization and transthioacetalization of carbonyl compounds

A range of carbonyl compounds including aliphatic and aromatic aldehydes and ketones were converted to the corresponding thioacetals in high yields in the presence of a catalytic amount of hafnium trifluoromethanesulfonate (0.1 mol %, room temperature). The mild conditions tolerated various sensitive functional and protecting groups and were racemization-free when applied to alpha-aminoaldehydes. Transacetalization and chemoselective thioacetalization of aromatic aldehydes in the presence of aliphatic aldehydes and ketones were also documented.     

Antimicrobial activity of organotin(IV) compounds: a review

A comprehensive review on antimicrobial activity of organotin(IV) compounds is presented. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation of99mTc-thiourea complex as a precursor for Tc(III) labeled compounds

Ligand exchange is one of the possible synthetic routes to obtain^99mTc coordination compounds. However, the success of this route depends on the availability of good precursors. The objective of this work is the preparation of the complex [^99mTc(tu)₆]³⁺ (tu = thiourea), as a potential precursor for^99mTc(III) coordination compounds. The preparation was successfully performed in acidic conditions, the excess of tu serving as reducing agent. At pH values higher than 3, the compound becomes unstable and on addition of polydentate ligands new Tc(III) complexes are formed. With edta, the complex^99mTc(III)-edta was obtained in high yield.     

Trimethylstannyl (diphenylphosphino)acetate: a source of (diphenylphosphino)acetate ligand in the synthesis of coordination compounds

Trimethylstannyl (diphenylphosphino)acetate (1), which is readily accessible from potassium (diphenylphosphino)acetate and trimethylstannyl chloride, may serve as the source of (diphenylphosphino)acetate anion in the preparation of coordination compounds. Thus, the reactions between [M(cod)Cl₂] (M = Pd and Pt; cod = η²:η²-cycloocta-1,5-diene) and two equivalents of 1 give [M(Ph₂PCH₂CO₂-κ²O,P)₂] (2 and 3), while the reaction of [{Pd(μ-Cl)Cl(PFur₃)}₂] (4; Fur = 2-furyl) with one equivalent of 1 yields [SP-4-3]-[PdCl(Ph₂PCH₂CO₂-κ²O,P)(PFur₃)] (5). The reactions of 1 with the dimers [{Rh(η⁵-C₅Me₅)Cl(μ-Cl)}₂] and [{Ru(η⁶-1,4-MeC₆H₄(CHMe₂))Cl(μ-Cl)}₂] (at 1-to-metal ratio 1:1) produce O,P-chelated complexes as well, albeit as stable adducts with the liberated Me₃SnCl: [RhCl(η⁵-C₅Me₅)(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (6) and[RuCl(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (8). The related complexes with P-monodentate (diphenylphosphino)acetic acid, [RhCl₂(η⁵-C₅Me₅)(Ph₂PCH₂CO₂H-κ,P)] (7) and [RuCl₂(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂H-κP)] (9), were obtained by bridge splitting in the dimers with the phosphinocarboxylic ligand. All new compounds were characterized by spectral methods and combustion analyses, and the structures of 2 · 3CH₂Cl₂, 3, 4, 5, 6 and 8 were determined by X-ray crystallography.     

New chiral diamino-bis(tert-thiophene): an effective ligand for Pd- and Zn-catalyzed asymmetric transformations

Enantiomerically pure diamino-bis(tert-thiophene) proved to be a valuable and flexible chiral ligand for Pd- and Zn-catalyzed transformations, allowing for high levels of stereocontrol in asymmetric allylic alkylation (ee up to 99%) and hydrosilylations of prochiral carbonyls (ee up to 97%).     

Magnesium/methanol: an effective reducing agent for chemoselective reduction of pyrimidine-2(1H)-ones

Magnesium in methanol is an effective reagent for the chemoselective reduction of pyrimidine-2(1H)-ones. Other reducible functionalities such as ester and alkene of enamine ester and uriedo carbonyl remain unaffected. This constitutes the first example of the formation of Biginelli 3,4-dihydropyrimidin-2(1H)ones through the reduction of pyrimidine-2(1H)-ones.     

Fluorous (trimethylsilyl)ethanol: a new reagent for carboxylic acid tagging and protection in peptide synthesis

Starting with a fluorous analogue of 2-(trimethylsilyl)ethanol, we have designed an easy method for preparing a new fluorous tag ((F)TMSE) for the protection of carboxylic acids. Because mild conditions are employed in the tag cleavage (TBAF in the presence of 4 A molecular sieves, which prevent racemization), this tag can be advantageously used in the synthesis of peptides and modified peptides, as we have demonstrated with several examples, including the fluorous synthesis of short alpha- and beta-peptides as well as of modified fluorinated retropeptides.     

Uracil-directed ligand tethering: an efficient strategy for uracil DNA glycosylase (UNG) inhibitor development

Uracil DNA glycosylase (UNG) is an important DNA repair enzyme that recognizes and excises uracil bases in DNA using an extrahelical recognition mechanism. It is emerging as a desirable target for small-molecule inhibitors given its key role in a wide range of biological processes including the generation of antibody diversity, DNA replication in a number of viruses, and the formation of DNA strand breaks during anticancer drug therapy. To accelerate the discovery of inhibitors of UNG we have developed a uracil-directed ligand tethering strategy. In this efficient approach, a uracil aldehyde ligand is tethered via alkyloxyamine linker chemistry to a diverse array of aldehyde binding elements. Thus, the mechanism of extrahelical recognition of the uracil ligand is exploited to target the UNG active site, and alkyloxyamine linker tethering is used to randomly explore peripheral binding pockets. Since no compound purification is required, this approach rapidly identified the first small-molecule inhibitors of human UNG with micromolar to submicromolar binding affinities. In a surprising result, these uracil-based ligands are found not only to bind to the active site but also to bind to a second uncompetitive site. The weaker uncompetitive site suggests the existence of a transient binding site for uracil during the multistep extrahelical recognition mechanism. This very general inhibitor design strategy can be easily adapted to target other enzymes that recognize nucleobases, including other DNA repair enzymes that recognize other types of extrahelical DNA bases.     

Photoelectron resonance capture ionization (PERCI): A novel technique for the soft-ionization of organic compounds

Photoelectron resonance capture ionization (PERCI) is demonstrated as a sensitive ionization technique involving minimal fragmentation of organic molecules. PERCI has been used successfully to softly and efficiently ionize both strongly UV absorbing and non-absorbing molecules. Tunable low energy (<1 eV) electrons are generated by focusing a pulsed UV laser on an aluminum photocathode in the presence of gas phase analyte. Negative ions are formed through a resonance electron capture process. Mass analysis is done using a reflectron time-of-flight mass spectrometer. PERCI is demonstrated for a number of gas phase compounds and simple mixtures, including sulfur hexafluoride, nitrobenzene, nitrophenol, 2-pentanone, hexanal, heptanal, and octanal. In all cases the molecular ion (or [M - H](-)) was observed to be the dominant peak. The 1sigma limit of detection was estimated to be on the order of 10(6) molecules in the ionization region.     

Synthesis, electronic structure, and catalytic activity of reduced bis(aldimino)pyridine iron compounds: experimental evidence for ligand participation

The two-electron reduction chemistry of the aryl-substituted bis(aldimino)pyridine iron dibromide, ((iPr)PDAI)FeBr(2) ((iPr)PDAI = 2,6-(2,6-(i)Pr(2)-C(6)H(3)-N═CH)(2)C(5)H(3)N), was explored with the goal of generating catalytically active iron compounds and comparing the electronic structure of the resulting compounds to the more well studied ketimine derivatives. Reduction of ((iPr)PDAI)FeBr(2) with excess 0.5% Na(Hg) in toluene solution under an N(2) atmosphere furnished the η(6)-arene complex, ((iPr)PDAI)Fe(η(6)-C(7)H(8)) rather than a dinitrogen derivative. Over time in pentane or diethyl ether solution, ((iPr)PDAI)Fe(η(6)-C(7)H(8)) underwent loss of arene and furnished the dimeric iron compound, [((iPr)PDAI)Fe](2). Crystallographic characterization established a diiron compound bridged through an η(2)-π interaction with an imine arm on an adjacent chelate. Superconducting quantum interference device (SQUID) magnetometry established two high spin ferrous centers each coupled to a triplet dianionic bis(aldimino)pyridine chelate. The data were modeled with two strongly antiferromagnetically coupled, high spin iron(II) centers each with an S = 1 [PDAI](2-) chelate. Two electron reduction of ((iPr)PDAI)FeBr(2) in the presence of 1,3-butadiene furnished ((iPr)PDAI)Fe(η(4)-C(4)H(6)), which serves as a precatalyst for olefin hydrogenation with modest turnover frequencies and catalyst lifetimes. Substitution of the trans-coordinated 1,3-butadiene ligand was accomplished with carbon monoxide and N,N-4-dimethylaminopyridine (DMAP) and furnished ((iPr)PDAI)Fe(CO)(2) and ((iPr)PDAI)Fe(DMAP), respectively. The molecular and electronic structures of these compounds were established by X-ray diffraction, NMR and Mo?ssbauer spectroscopy, and the results compared to the previously studied ketimine variants.     

Synthesis of 4-methoxy-2,3,5-trimethylpyridine: a specific building block for compounds with gastric-acid inhibiting activity

A new synthesis of 4-methoxy-2,3,5-trimethylpyridine (2), an important building block for the preparation of gastric-acid inhibiting compounds, is described. Condensation of ethyl 3-amino-2-methyl-2-butenoate (3) and diethyl 2-methylmalonate (4) gives 4-hydroxy-3,5,6-trimethyl-2(1H)-pyridone 5. Reaction of 5 with phosphoryl chloride affords 2,4-dichloro-3,5,6-trimethylpyridine (9a), which, upon hydrogenolysis with palladium on charcoal, gives 2,3,5-trimethylpyridine (10). However, selective hydrogenolysis in acidic solution yields 4-chloro-2-3-5-trimethylpyridine (11). Substitution of the chlorine in 11 with methoxide ion gives 4-methoxy-2,3,5-trimethylpyridine (2), which can be oxidized to the corresponding N-oxide (13). This constitutes a new and efficient route to compound 2 in an overall yield of 43%.     

A coordination polymer strategy for anion encapsulation: anion-pi interactions in (4,4) nets formed from Ag(I) salts and a flexible pyrimidine ligand

Anions encapsulated by a uniform mode of anion-pi binding in isomorphous (4,4) nets formed from Ag(I) salts and bis(4-pyrimidylmethyl)sulfide appear to be structurally directing.     

Catecholase activity of a copper(II) complex with a macrocyclic ligand: unraveling catalytic mechanisms

We report the structure, properties and a mechanism for the catecholase activity of a tetranuclear carbonato-bridged copper(II) cluster with the macrocyclic ligand [22]pr4pz (9,22-dipropyl-1,4,9,14,17,22,27,28,29, 30-decaazapentacyclo[22.2.1.1(4,7).1(11,14). 1(17,20)]triacontane-5,7(28),11(29),12,18, 20(30),24(27),25-octaene). In this complex, two copper ions within a macrocyclic unit are bridged by a carbonate anion, which further connects two macrocyclic units together. Magnetic susceptibility studies have shown the existence of a ferromagnetic interaction between the two copper ions within one macrocyclic ring, and a weak antiferromagnetic interaction between the two neighboring copper ions of two different macrocyclic units. The tetranuclear complex was found to be the major compound present in solution at high concentration levels, but its dissociation into two dinuclear units occurs upon dilution. The dinuclear complex catalyzes the oxidation of 3,5-di-tert-butylcatechol to the respective quinone in methanol by two different pathways, one proceeding via the formation of semiquinone species with the subsequent production of dihydrogen peroxide as a byproduct, and another proceeding via the two-electron reduction of the dicopper(II) center by the substrate, with two molecules of quinone and one molecule of water generated per one catalytic cycle. The occurrence of the first pathway was, however, found to cease shortly after the beginning of the catalytic reaction. The influence of hydrogen peroxide and di-tert-butyl-o-benzoquinone on the catalytic mechanism has been investigated. The crystal structures of the free ligand and the reduced dicopper(I) complex, as well as the electrochemical properties of both the Cu(II) and the Cu(I) complexes are also reported.     

Replacement of chlorides with dicarboxylate ligands in anticancer active Ru(II)-DMSO compounds: a new strategy that might lead to improved activity

A series of new Ru(II)-DMSO complexes containing dicarboxylate ligands (dicarb), namely, oxalate (ox), malonate (mal), methylmalonate (mmal), dimethylmalonate (dmmal), and succinate (suc), have been synthesized and structurally characterized. These compounds were prepared from the known Ru(II)-Cl-DMSO anticancer complexes cis,fac-[RuCl2(DMSO-S)3(DMSO-O)] (1) and trans-[RuCl2(DMSO-S)4] (2) and from the chloride-free precursor fac-[Ru(DMSO-S)3(DMSO-O)3][CF3SO3]2 (3), with the aim of assessing how the nature of the anionic ligands influences the biological activity of these species. Basically, the investigated ligands can be divided into two groups. The reaction of either 1 or 2 with K2(dicarb) (dicarb = ox, mal, mmal) yielded preferentially the mononuclear species [K]fac-[RuCl(DMSO-S)3(eta2-dicarb)] (dicarb = mal, 6; mmal, 9; ox, 14) that contains a chelating dicarboxylate unit and a residual chloride. Likewise, when 3 was used as a precursor, the neutral mononuclear species fac-[Ru(DMSO-O)(DMSO-S)3(eta2-dicarb)] (dicarb = mal, 7; mmal, 10; ox, 16), which contains a DMSO-O ligand in the place of Cl-, was obtained. On the contrary, K2(suc) and K2(dmmal) yielded preferentially the dinuclear species [fac-Ru(DMSO-S)3(H2O)(mu-dicarb)]2 (dicarb = dmmal, 11; suc, 13), with two bridging dicarboxylate moieties. The two water molecules in anti geometry have strong intramolecular H-bonding with the non-coordinated oxygen atoms of the carboxylate groups. The solid-state X-ray structural data showed that the preferential binding mode of the investigated dicarboxylates, either bridging (mu) or chelating (eta2), is dictated mainly by steric reasons. Oxalate, unlike the other dicarboxylates, has also the bridging bis-chelate (eta4,mu) coordination mode available: this was found in the dinuclear species [{fac-RuCl(DMSO-S)3}2(eta4,mu-ox)] (15) and [{fac-Ru(DMSO-O)(DMSO-S)3}2(eta4,mu-ox)][CF3SO3]2 (17). We also isolated the unprecedented neutral metallacycle, [fac-Ru(DMSO-S)3(eta3,mu-ox)]4 (18), in which each oxalate unit has one unbound oxygen atom. The new complexes were thoroughly characterized by 1-D (1H and 13C) and 2-D (H-H- COSY and HMQC) NMR spectroscopy in solution and by IR spectroscopy in the solid state. The molecular structures of 10 compounds, 6-11, 13, 15, 17, and 18, were determined by X-ray crystallography. The behavior of selected complexes in aqueous solution was investigated by 1H NMR spectroscopy.     

Tris(pentafluorophenyl)borane: a mild and efficient catalyst for the chemoselective tritylation of alcohols

An efficient acid-catalyzed protection of alcohols as trityl ethers is described using triphenylmethanol in the presence of tris(pentafluorophenyl)borane (3 mol %) in dichloromethane at room temperature. The chemoselectivity of this protocol is demonstrated by studying the tritylation of a primary alcohol in the presence of a secondary alcohol and also the mildness of this catalyst was studied with substrates containing acid labile protecting groups.     

Gas-phase and solution-phase polymerization of epoxides by Cr(salen) complexes: evidence for a dinuclear cationic mechanism

The gas-phase reactions of a series of mass-selected mononuclear and dinuclear Cr(salen) complexes with propylene oxide suggest that the enhanced reactivity of the dinuclear complexes in gas-phase and in solution may derive from a dicationic mechanism in which the alkoxide chain is mu(2)-coordinated to two Lewis acidic metal centers. The double coordination is proposed to suppress backbiting, and hence chain-transfer in the gas-phase homopolymerization of epoxides.     

Potential strategy used for controlling the phosphorescent properties in tetradentate Pt(II) complexes: Effect of azole ligand

Designing deep‐blue phosphorescent materials is vital and essential in the construction of white organic light‐emitting diodes. Using density functional theory (DFT) and time‐dependent DFT, three tetradentate Pt(II) complexes were investigated in detail to reveal the influence of azole ligand with varying number of N atoms on the emission wavelengths and radiative and non‐radiative decay processes. The calculated results indicate that with an increase of N atoms in azole rings, the radiative decay process can be effectively facilitated. Moreover, an increase of N atoms in azole rings could lead to a distinct blue‐shift of emission wavelengths from 553 to 470 nm. Also, the non‐radiative decay processes, including temperature‐independent and temperature‐dependent ones, were taken into account. The results may provide some valuable and meaningful information for designing high‐performance phosphorescent Pt(II) complexes.     

Fluorous osmium tetraoxide (OsO4): a recoverable and reusable catalyst for dihydroxylation of olefins

A fluorous osmium catalyst was firstly developed. It had been effectively used as recoverable and reusable catalyst in the dihydroxylation of olefins.