Plasma surface modification of poly (l-lactic acid) and poly (lactic-co-glycolic acid) films for improvement of nerve cells adhesion

Radio frequency (RF) plasma treatment in O₂ was applied to modify the surface of poly (l-lactic acid) (PLLA) and poly (d,l-lactic acid-coglycolic acid) (PLGA) as biodegradable polymers. The surface structure, morphology, wettability and surface chemistry of treated films were characterized by water drop contact angle measurement, scanning electron microscope (SEM), optical invert microscope, differential scanning calorimetry (DSC) and ATIR–FTIR spectroscopy. The cell affinity of the oxygen plasma treated film was evaluated by nervous tissue B65 cell culture in stationary conditions. The results showed that the hydrophilicity increased greatly after O₂ plasma treatment. The results showed that improved cell adhesion was attributed to the combination of surface chemistry and surface wettability during plasma treatment. Cell culture results showed that B65 nervous cell attachment and growth on the plasma treated PLLA was much higher than an unmodified sample and PLGA. Surface hydrophilicity and chemical functional groups with high polar component play an important role in enhancing cell attachment and growth.     

Study of poly(lactic-co-glycolic acid) interactions with collagen

Poly(lactic-co-glycolic acid) (PLGA) is excellent to fabricate drug delivery systems that prolong the release of recombinant human growth hormone (rhGH), with current research focusing on their possible use for bone regeneration in odontological practice.Herein, we evaluate PLGA interactions with a component of the buccal cavity, as collagen, using monolayers and differential scanning calorimetry (DSC) techniques.Our results indicate that interactions in the PLGA-collagen mixtures showed no phase separation and attraction forces were detected irrespective of the concentration ratio.     

Interfacial properties of hydrophilized poly(lactic-co-glycolic acid) layers with various thicknesses

Biodegradable polyesters such as poly(lactic-co-glycolic acid) copolymers (PLGA) are preferred materials for drug carrier systems although their surface hydrophobicity greatly limits their use in controlled drug delivery. PLGA thin films on a solid support blended with PEG-containing compound (Pluronic) were used as model systems to study the interfacial interactions with aqueous media. Degree of surface hydrophilization was assessed by wettability, and X-ray photoelectron spectroscopy (XPS) measurements. Protein adsorption behavior was investigated by in situ spectroscopic ellipsometry. The degree of protein adsorption showed a good correlation with the hydrophilicity, and surface composition. Unexpectedly, the layer thickness was found to have a great impact on the interfacial characteristics of the polymer films in the investigated regime (20-200 nm). Thick layers presented higher hydrophilicity and great resistance to protein adsorption. That special behavior was explained as the result of the swelling of the polymer film combined with the partial dissolution of Pluronic from the layer. This finding might promote the rational design of surface modified biocompatible nanoparticles.     

Controlling the stability and size of double-emulsion-templated poly(lactic-co-glycolic) acid microcapsules

The stability and size of poly(lactic-co-glycolic)acid (PLGA)-containing double emulsions and the resulting PLGA microcapsules are controlled by varying the composition of highly monodisperse water-in-oil-in-water (W/O/W) double emulsions. We propose that the basic inner phase of W/O/W double emulsions catalyzes the hydrolysis of PLGA and the ionization of carboxylic acid end groups, which enhances the surface activity of PLGA and facilitates the stabilization of the double emulsions. The size of PLGA-containing double emulsions and that of resulting microcapsules can be readily tuned by osmotic annealing, which depends on the concentration ratio of a solute in the inner and outer phases of double emulsions. The internal volume of PLGA microcapsules can be changed by more than 3 orders of magnitude using this method. This approach also overcomes the difficulty in generating monodisperse double emulsions and microcapsules over a wide range of dimensions using a single microfluidic device. The osmotic annealing method can also be used to concentrate encapsulated species such as colloidal suspensions and biomacromolecules.     

Degradation kinetics of poly(lactic-co-glycolic) acid block copolymer cast films in phosphate buffer solution as revealed by infrared and Raman spectroscopies

Poly(lactic-co-glycolic) acid (PLGA) is an important copolymer used in drug delivery platforms where controlled release is required. In this work we investigated the in vitro degradation of four PLGA copolymers with L/G molar compositions of 50/50, 65/35, 75/25 and 95/5. ATR-IR and Raman spectroscopies were used to differentiate and quantify the degradation rates of glycolic and lactic units. Both techniques were used to determine the polymer composition as a function of degradation time and the degradation rate constants for the hydrolysis of glycolic and lactic units were calculated using a 1st order kinetics approach. Our results revealed a two stage process for the degradation of PLGA cast films in PBS in agreement with our previous work. The degradation rate constant for glycolic unit was found to be 1.3 times higher than for lactic units. In addition the degradation rate constants for L and G units were shown to decrease proportionally with increasing initial lactic content of the copolymer used to prepare the films.     

Patterning of neural stem cells on poly(lactic-co-glycolic acid) film modified by hydrophobin

Patterning of neural stem cells (NSCs) is of great importance for its potential applications in the therapy of nerve injuries. Due to the critical requirements and the great difficulty in NSCs cultivation, developing new methods for NSCs patterning is very challenging and has progressed slowly in recent years. In this study, we reported a new method for patterning NSCs on a hydrophobin II (HFBI) modified poly(lactic-co-glycolic acid) (PLGA) film by using microcontact printing (μCP) technique. HFBI modification converted the PLGA surface from hydrophobic to hydrophilic, which should facilitate the absorption of serum on it. Serum was transferred onto the modified PLGA film by microcontact printing (μCP) to promote NSCs adhesion on the PLGA surface. Since the serum-coated PLGA surface promoted NSCs adhesion and the serum-free PLGA surface inhibited NSCs adhesion, micro-patterns of NSCs were obtained by directly culturing NSCs on the PLGA surface patterned with serum. This method allows the precise control of NSCs adhesion on the PLGA film without using the conventional cell-repellent species, which is anticipated to make great contribution in the fields of therapy of nerve injuries.     

Raman characterization of orientation in poly(lactic acid) films

Poly(lactic acid) is a new biopolymer material which is marketed by Cargill Dow Polymers under the tradename Nature Works*. One major application for this material is biaxially oriented films for food packaging because it possesses excellent barrier for flavor constituents, deadfold and heat sealability. Shrinkage must be minimized when the film is heat sealed for these applications and, therefore, characterization of the orientation of the amorphous phase of PLA films is necessary. Raman spectroscopy methodology has been developed to quantify orientation in PLA films. Bands were assigned to crystalline and amorphous phases of PLA such that orientation in both phases could be monitored. Raman depolarization ratios were used to characterize uniaxial systems but were insufficient for most biaxial draws. A new phenomenon for oriented films involving Raman band shifts was observed in these systems, and was shown to be capable of determining orientation, even for symmetrical biaxially drawn films. The origin of these shifts, as well as their use for the quantification of orientation will be discussed. Further, since the line widths of the bands could be used to quantify crystallinity, both crystallinity and orientation could be determined with one measurement.     

Self-doping effect in poly(o-methoxyaniline)/poly(3-thiopheneacetic acid) layer-by-layer films

Nanostructured films from two conducting polymers, poly(o-methoxyaniline) (POMA) and poly(3-thiopheneacetic acid) (PTAA), were fabricated with the layer-by-layer (LBL) technique. The electrochemical response of the LBL films differs from that of a POMA cast film, even in a potential range where PTAA is inactive. This is attributed to differences in the diffusion-controlled charge and mass transport, where distinct ionic species participate in the LBL films, as demonstrated by quartz crystal microbalance measurements. The results show that the transport properties of conducting polymers can be changed by alternation with layers of appropriate materials in LBL films.     

Conjugation of bioactive groups to poly(lactic acid) and poly[(lactic acid)-co-(glycolic acid)] films

A novel PLA-based polymer containing reactive pendent ketone or hydroxyl groups was synthesized by the copolymerization of L-lactide with epsilon-caprolactone-based monomers. The polymer was activated with NPC, resulting in an amine-reactive polymer which was then cast into thin polymeric films, either alone or as part of a blend with PLGA, before immersion into a solution of the cell adhesion peptide GRGDS in PBS buffer allowed for conjugation of GRGDS to the film surfaces. Subsequent 3T3 fibroblast cell adhesion studies demonstrated an increase in cellular adhesion and spreading over films cast from unmodified PLGA. Hence the new polymer can be used to obtain covalent linkage of amine-containing molecules to polymer surfaces.     

Tuning the pH sensitivity of poly(methacrylic acid) brushes

The pH-induced swelling and collapse of surface-tethered, weak polyelectrolyte brushes is of interest for the development of actuators or to allow pH controlled transport or adsorption. This contribution discusses results of an extensive series of quartz crystal microbalance (QCM) experiments that aimed at (i) further understanding the influence of brush thickness and density on the pH responsiveness of poly(methacrylic acid) (PMAA) brushes and (ii) developing strategies that allow one to engineer the pH responsiveness and dynamic response range of PMAA based brushes. It was observed that, due to their high grafting density, the apparent pK(a) of surface-tethered PMAA differs from that of the corresponding free polymer in solution and also covers a broader pH range. The pK(a) of the PMAA brushes was found to depend on both brush thickness and density; thicker brushes showed a higher pK(a) value, and brushes of higher density started to swell at higher pH. The second part of the paper demonstrates the feasibility of the N-hydroxysuccinimide-mediated post-polymerization modification to engineer the pH responsiveness of the PMAA brushes. By using appropriate amine functionalized acids, it was possible to tune both the pH of maximum response as well as the dynamic response range of these PMAA based polyelectrolyte brushes.     

XPS and wettability characterization of modified poly(lactic acid) and poly(lactic/glycolic acid) films

Poly(lactic acid) (PLA) and poly(lactic/glycolic acid) copolymers (PLGA) are biodegradable drug carriers of great importance, although successful pharmaceutical application requires adjustment of the surface properties of the polymeric drug delivery system to be compatible with the biological environment. For that reason, reduction of the original hydrophobicity of the PLA or PLGA surfaces was performed by applying a hydrophilic polymer poly(ethylene oxide) (PEO) with the aim to improve biocompatibility of the original polymer. PEO-containing surfaces were prepared by incorporation of block copolymeric surfactants, poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (Pluronic), into the hydrophobic surface. Films of polymer blends from PLA or PLGA (with lactic/glycolic acid ratios of 75/25 and 50/50) and from Pluronics (PE6800, PE6400, and PE6100) were obtained by the solvent casting method, applying the Pluronics at different concentrations between 1 and 9.1% w/w. Wettability was measured to monitor the change in surface hydrophobicity, while X-ray photoelectron spectroscopy (XPS) was applied to determine the composition and chemical structure of the polymer surface and its change with surface modification. Substantial reduction of surface hydrophobicity was achieved on both the PLA homopolymer and the PLGA copolymers by applying the Pluronics at various concentrations. In accordance with the wettability changes the accumulation of Pluronics in the surface layer was greatly affected by the initial hydrophobicity of the polymer, namely, by the lactide content of the copolymer. The extent of surface modification was also found to be dependent on the type of blended Pluronics. Surface activity of the modifying Pluronic component was interpreted by using the solubility parameters.     

Formation of high-capacity protein-adsorbing membranes through simple adsorption of poly(acrylic acid)-containing films at low pH

Layer-by-layer polyelectrolyte adsorption is a simple, convenient method for introducing ion-exchange sites in porous membranes. This study demonstrates that adsorption of poly(acrylic acid) (PAA)-containing films at pH 3 rather than pH 5 increases the protein-binding capacity of such polyelectrolyte-modified membranes 3-6-fold. The low adsorption pH generates a high density of -COOH groups that function as either ion-exchange sites or points for covalent immobilization of metal-ion complexes that selectively bind tagged proteins. When functionalized with nitrilotriacetate (NTA)-Ni(2+) complexes, membranes containing PAA/polyethylenimine (PEI)/PAA films bind 93 mg of histidine(6)-tagged (His-tagged) ubiquitin per cm(3) of membrane. Additionally these membranes isolate His-tagged COP9 signalosome complex subunit 8 from cell extracts and show >90% recovery of His-tagged ubiquitin. Although modification with polyelectrolyte films occurs by simply passing polyelectrolyte solutions through the membrane for as little as 5 min, with low-pH deposition the protein binding capacities of such membranes are as high as for membranes modified with polymer brushes and 2-3-fold higher than for commercially available immobilized metal affinity chromatography (IMAC) resins. Moreover, the buffer permeabilities of polyelectrolyte-modified membranes that bind His-tagged protein are ~30% of the corresponding permeabilities of unmodified membranes, so protein capture can occur rapidly with low-pressure drops. Even at a solution linear velocity of 570 cm/h, membranes modified with PAA/PEI/PAA exhibit a lysozyme dynamic binding capacity (capacity at 10% breakthrough) of ~40 mg/cm(3). Preliminary studies suggest that these membranes are stable under depyrogenation conditions (1 M NaOH).     

Rheo-optical FT-IR spectroscopy of solid poly(acrylic acid) films

This paper describes experimental work where the mechanical behaviour of relatively dry, solid poly(acrylic acid) films at room temperature was correlated with changes in hydrogen-bonding in the polymer. Hydrogen-bonding between the carbonyl and the hydroxyl groups was followed by FT-IR spectroscopy while the films were stretched uniaxially. Limited mobility of the polymer below its T_g led to small but detectable changes in bonding. A characteristic strain-hardening behaviour was observed if no bound water was detected in the samples.     

Incorporation of carboxylation multiwalled carbon nanotubes into biodegradable poly(lactic-co-glycolic acid) for bone tissue engineering

Biodegradable poly(lactic-co-glycolic acid) (PLGA)/carboxyl-functionalized multi-walled carbon nanotube (c-MWCNT) nanocomposites were successfully prepared via solvent casting technique. Rat bone marrow-derived mesenchymal stem cells (MSCs) were employed to assess the biocompatibility of the nanocomposites in vitro. Scanning electron microscopy (SEM) observations revealed that c-MWCNTs gave a better dispersion than unmodified MWCNTs in the PLGA matrix. Surface properties were determined by means of static contact angle, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) analysis. The presence of c-MWCNTs increased the mechanical properties of the nanocomposites. Seven-week period in vitro degradation test showed the addition of c-MWCNTs accelerated the hydrolytic degradation of PLGA. In addition, SEM proved that the cells could adhere to and spread on films via cytoplasmic processes. Compared with control groups, MSCs cultured onto PLGA/c-MWCNT nanocomposites exhibited better adhesion and viability and also displayed significantly higher production levels of alkaline phosphatase (ALP) over 21 days culture. These results demonstrated that c-MWCNTs modified PLGA films were beneficial for promoting cell growth and inducing MSCs to differentiate into osteoblasts. This work presented here had potential applications in the development of 3-D scaffolds for bone tissue engineering.     

Rheo-optical FT-IR spectroscopy of poly(3-hydroxybutyrate)/poly(lactic acid) blend films

The orientation of poly(3-hydroxybutyrate) (PHB) and poly(lactic acid) (PLA) segments in PHB/PLA blend films cast from chloroform solutions with compositions PHB < PLA was studied during uniaxial elongation up to 250% strain at 50 °C by in-situ rheo-optical FT-IR spectroscopy. From the orientation functions of the ν(CO) bands of the blend components, it was derived that the PLA chains orient in the direction of elongation while the PHB chains orient perpendicular to the drawing direction. PHB homopolymer and PHB/PLA blend films with PHB > PLA compositions could only be oriented by cold drawing in ice water after quenching from the melt. The IR-dichroic effects of films drawn under these conditions indicate for both blend components a chain alignment parallel to the drawing direction.     

Light olefins/paraffins sorption in poly(lactic acid) films

The sorption behavior of small molecules like ethane and ethylene in poly (lactic acid) (PLA) was studied in the temperature interval from 283 to 313 K using a Quartz Crystal Microbalance (QCM). The effect of the polymer structure on the solubility selectivity of PLA films with respect to these two gases was studied using polymer with two different L:D ratios (98:2 and 80:20). Furthermore, the polymer films were submitted to different thermal treatments to address the influence of crystallinity and morphology of the noncrystalline fraction on the sorption behavior. The sorption results obtained indicate that ethylene solubility coefficient in annealed PLA 98:2 is about 26% higher than that of ethane and 41% higher in PLA 98:2 melted. The dual‐mode sorption model describes well the sorption isotherms behavior, which is concave concerning the pressure axis. The fully amorphous PLA presents the better selectivity for the studied gases, since the crystallinity seems to produce a negative effect on the selectivity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1312–1319, 2008     

Poly(lactic-co-glycolic acid) as a particulate emulsifier

The structure and stability of emulsions formed in the presence of nanoparticles of poly(lactic-co-glycolic acid) (PLGA) were characterised. From oil-water contact angles on PLGA films, it was deduced that particle surface hydrophobicity is linked to the oil phase polarity. Incorporation of polyvinyl alcohol molecules into the nanoparticle surfaces reduces the particle hydrophobicity sufficiently for oil-in-water emulsions to be preferentially stabilised. PLGA nanoparticles enhance the stability of emulsions formed from a wide range of oils of different polarities. The nanoparticle concentration was found to be a key parameter controlling the average size and coalescence stability of the emulsion drops. Visualisation of the interfacial structure by electron microscopy indicated that PLGA nanoparticles were located at the drop surfaces, evidence of the capacity of these particles to stabilise Pickering-type emulsions. These results provide insights into the mechanism of PLGA nanoparticle stabilisation of emulsions.     

Surface grafting polyethylene glycol (PEG) onto poly(ethylene-co-acrylic acid) films

Two reaction schemes were developed to covalently graft poly(ethylene glycol) (PEG) chains on poly(ethylene-co-acrylic acid) (EAA) surfaces. The schemes involved surface grafting of linker molecules L-lysine or polypropyleneamine dendrimer (AM64), with subsequent covalent bonding of PEG chains to the linker molecules. NHS and EDC were used to activate the carboxylic acid groups of the EAA in the outermost region of the film, estimated to be 20 nm by ATR-FTIR spectroscopy. XPS demonstrated that the conversion of this activation step was almost 100% in the detected region. After activation, L-lysine or dendrimer was grafted onto the EAA surface, followed by PEG grafting. Combining the data from ATR-FTIR, XPS, and contact angle goniometry, it was found that the PEG chains were grafted on the surface of the EAA film and larger surface coverage was achieved when the dendrimer was used as the intermediate layer. This surface also had the lowest water contact angle.     

Electrochemical decomposition of layer-by-layer thin films composed of TEMPO-modified poly(acrylic acid) and poly(ethyleneimine)

The decomposition of layer-by-layer (LbL) thin films composed of 2,2,6,6-tetramethylpiperidine-1-oxyl free radical-appended poly(acrylic acid) (TEMPO-PAA) and poly(ethylenimine) (PEI) was studied by using a quartz crystal microbalance (QCM) and cyclic voltammetry. The electrode potential of the (PEI/TEMPO-PAA)₄/PEI film-coated Au resonator was scanned from +0.2 to +0.8 V vs Ag/AgCl. The CV showed that the oxidation peak current decreased as the number of scans increased. The change in the resonance frequency of the QCM increased after electrolysis, indicating that the film was decomposed by electrolysis. The positive charges originating from the oxoammonium ions probably destabilized the (PEI/TEMPO-PAA)₄/PEI film. Furthermore, the release of 5,10,15,20-tetraphenyl-21H,23H-porphine tetrasulfonic acid (TPPS) from TPPS-loaded (PEI/TEMPO-PAA)₄/PEI-coated ITO electrodes was investigated. TPPS was released at electrode potentials greater than +0.6 V by the decomposition of the film. The results suggest that TEMPO-PAA/PEI LbL films are suitable for electrochemically controlled drug delivery systems.     

聚(乳酸-羟基乙酸)共聚物涂层的释药性能

以乙酸乙酯为溶剂,配制聚(乳酸-羟基乙酸)共聚物(PLGA)雷帕霉素溶液,利用滴涂法在316L不锈钢表面制备PLGA载药涂层。于37℃磷酸盐缓冲液(PBS)中进行体外动态药物释放,并用紫外-可见分光光度计测定药物释放量。结果表明:PLGA涂层中PLGA分子量越小,羟基乙酸(GA)含量越高,药物释放越快;药物释放量与滴涂量呈线性关系,药物释放率与滴涂量的倒数呈线性关系;涂层中药物含量增加,其释放量也随之增加,而药物释放率先增加后降低。