Copper(ii) complexes as turn on fluorescent sensors for nitric oxide

Two copper(ii) complexes, 1 and 2, of two tridentate N-donor ligands, L(1) and L(2) [L(1) = dansyl derivative of bis-[3-(dimethylamino)-propyl]amine; L(2) = dansyl derivative of dipropylenetriamine] were synthesized and characterized. The quenched fluorescence intensity of complexes 1 and 2, in degassed methanol or aqueous (buffered at pH 7.2) solution, was found to reappear on exposure to nitric oxide. This is attributed to the reduction of paramagnetic Cu(ii) center by nitric oxide to diamagnetic Cu(i).     

Role of ligand to control the mechanism of nitric oxide reduction of copper(II) complexes and ligand nitrosation

The nitric oxide reactivity of two copper(II) complexes, 1 and 2 with ligands L(1) and L(2), respectively, [L(1) = 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane, L(2) = 5,5,7-trimethyl-[1,4]-diazepane] have been studied. The copper(II) center in complex 1 was found to be unreactive toward nitric oxide in pure acetonitrile; however, it displayed reduction in methanol solvent in presence of base. The copper(II) center in 2, in acetonitrile solvent, on exposure to nitric oxide has been found to be reduced to copper(I). The same reduction was observed in methanol, also, in case of complex 2. In case of complex 1, presumably, the attack of nitric oxide on the deprotonated amine is the first step, followed by electron transfer to the copper(II) center to afford the reduction. Alternatively, first NO coordination to the Cu(II) followed by NO(+) migration to the secondary amine is the most probable in case of complex 2. The observation of the transient intermediate in UV-visible and FT-IR spectroscopy prior to reduction in case of complex 2 also supports this possibility. In both cases, the reduction resulted into N-nitrosation; in 1, only mononitrosation was observed whereas complex 2 afforded dinitrosation as major product along with a minor amount of mononitrosation. Thus, it is evident from the present study that the macrocyclic ligands prefer the deprotonation pathway leading to mononitrosation; whereas nonmacrocyclic ones prefer the [Cu(II)-NO] intermediate pathway resulting into nitrosation at all the available sites of the ligand as major product.     

Diastereospecific and diastereoselective syntheses of Ruthenium(II) complexes using N,N' bidentate ligands aryl-pyridin-2-ylmethyl-amine ArNH-CH2-2-C5H4N and their oxidation to imine ligands

Coordination of N,N' bidentate ligands aryl-pyridin-2-ylmethyl-amine ArNH-CH2-2-C5H4N 1 (Ar = 4-CH3-C6H4, 1a; 4-CH3O-C6H4, 1b; 2,6-(CH3)2-C6H3, 1c; 4-CF3-C6H4, 1d) to the moieties [Ru(bipy)2]2+, [Ru(eta5-C5H5)L]+ (L = CH3CN, CO), or [Ru(eta6-arene)Cl]2+ (arene = benzene, p-cymene) occurs under diastereoselective or diastereospecific conditions. Detailed stereochemical analysis of the new complexes is included. The coordination of these secondary amine ligands activates their oxidation to imines by molecular oxygen in a base-catalyzed reaction and hydrogen peroxide was detected as byproduct. The amine-to-imine oxidation was also observed under the experimental conditions of cyclic voltammetry measurements. Deprotonation of the coordinated amine ligands afforded isolatable amido complexes only for the ligand (1-methyl-1-pyridin-2-yl-ethyl)-p-tolyl-amine, 1e, which doesn't contain hydrogen atoms in a beta position relative to the N-H bond. The structures of [Ru(2,2'-bipyridine)2(1b)](PF6)2, 2b; [Ru(2,2'-bipyridine)(2)(1c)](PF6)2, 2c; trans-[RuCl2(COD)(1a)], 3; and [RuCl2(eta6-C6H6)(1a)]PF6, 4a, have been confirmed by X-ray diffraction studies.     

Rhenium tricarbonyl core complexes of thymidine and uridine derivatives

Thymidine and uridine were modified at the C2' and C5' ribose positions to form amine analogues of the nucleosides (1 and 4). Direct amination with NaBH(OAc)3 in DCE with the appropriate aldehydes yielded 1-{5-[(bis(pyridin-2-ylmethyl)amino)methyl]-4-hydroxytetrahydrofuran-2-yl}-5-methyl-1H-pyrimidine-2,4-dione (L1), 1-{5-[(bis(quinolin-2-ylmethyl)amino)methyl]-4-hydroxytetrahydrofuran-2-yl}-5-methyl-1H-pyrimidine-2,4-dione (L2), and 1-[3-(bis(pyridin-2-ylmethyl)amino)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl]-1H-pyrimidine-2,4-dione (L5), while standard coupling procedures of 1 and 4 with 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid (2) and 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid (3) in the presence of HOBT-EDCI in DMF provided a second novel series of bifunctional chelators: 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid [(3-hydroxy-5-(5-methyl-4-oxo-3,4-dihydro-2H-pyrimidin-1-yl)tetrahydrofuran-2-yl)methyl] amide (L3), 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid [(3-hydroxy-5-(5-methyl-4-oxo-3,4-dihydro-2H-pyrimidin-1-yl)tetrahydrofuran-2-yl)methyl] amide (L4), 5-(bis(pyridin-2-ylmethyl)amino)pentanoic acid [2-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-3-yl] amide (L6), and 5-(bis(quinolin-2-ylmethyl)amino)pentanoic acid [2-(2,4-dioxo-3,4-dihydro-2H-pyrimidin-1-yl)-4-hydroxy-5-(hydroxymethyl)tetrahydrofuran-3-yl] amide (L7). The rhenium tricarbonyl complexes of L1-L4, L6, and L7, [Re(CO)3(LX)]Br (X=1-4, 6, 7: compounds 5-10, respectively), have been prepared by reacting the appropriate ligand with [NEt4][Re(CO)3Br3] in methanol. The ligands and their rhenium complexes were obtained in good yields and characterized by common spectroscopic techniques including 1D and 2D NMR, HRMS, IR, cyclic voltammetry, UV, and luminescence spectroscopy and X-ray crystallography. The crystal structure of complex 6.0.5NaPF6 displays a facial geometry of the carbonyl ligands. The nitrogen donors of the tridentate ligand complete the distorted octahedral spheres of the complex. Crystal data: monoclinic, C2, a = 24.618(3) A, b = 11.4787(11) A, c = 15.5902(15) A, beta = 112.422(4) degrees , Z = 4, D(calc) = 1.562 g/cm3.     

Nickel(II) complexes of tripodal 4N ligands as catalysts for alkane oxidation using m-CPBA as oxidant: ligand stereoelectronic effects on catalysis

Several mononuclear Ni(II) complexes of the type [Ni(L)(CH(3)CN)(2)](BPh(4))(2) 1-7, where L is a tetradentate tripodal 4N ligand such as N,N-dimethyl-N',N'-bis(pyrid-2-ylmethyl)ethane-1,2-diamine (L1), N,N-diethyl-N',N'-bis(pyrid-2-ylmethyl)ethane-1,2-diamine (L2), N,N-dimethyl-N'-(1-methyl-1H-imidazol-2-ylmethyl)-N'-(pyrid-2-ylmethyl)ethane-1,2-diamine (L3), N,N-dimethyl-N',N'-bis(1-methyl-1H-imidazol-2-ylmethyl)ethane-1,2-diamine (L4), N,N-dimethyl-N',N'-bis(quinolin-2-ylmethyl)ethane-1,2-diamine (L5), tris(benzimidazol-2-ylmethyl)amine (L6) and tris(pyrid-2-ylmethyl)amine (L7), have been isolated and characterized using CHN analysis, UV-Visible spectroscopy and mass spectrometry. The single-crystal X-ray structures of the complexes [Ni(L1)(CH(3)CN)(H(2)O)](ClO(4))(2) 1a, [Ni(L2)(CH(3)CN)(2)](BPh(4))(2) 2, [Ni(L3)(CH(3)CN)(2)](BPh(4))(2) 3 and [Ni(L4)(CH(3)CN)(2)](BPh(4))(2) 4 have been determined. All these complexes possess a distorted octahedral coordination geometry in which Ni(II) is coordinated to four nitrogen atoms of the tetradentate ligands and two CH(3)CN (2, 3, 4) or one H(2)O and one CH(3)CN (1a) are located in cis positions. The Ni-N(py) bond distances (2.054(2)-2.078(3) ?) in 1a, 2 and 3 are shorter than the Ni-N(amine) bonds (2.127(2)-2.196(3) ?) because of sp(2) and sp(3) hybridizations of the pyridyl and tertiary amine nitrogens respectively. In 3 the Ni-N(im) bond (2.040(5) ?) is shorter than the Ni-N(py) bond (2.074(4) ?) due to the stronger coordination of imidazole compared with the pyridine donor. In dichloromethane/acetonitrile solvent mixture, all the Ni(ii) complexes possess an octahedral coordination geometry, as revealed by the characteristic ligand field bands in the visible region. They efficiently catalyze the hydroxylation of alkanes when m-CPBA is used as oxidant with turnover number (TON) in the range of 340-620 and good alcohol selectivity for cyclohexane (A/K, 5-9). By replacing one of the pyridyl donors in TPA by a weakly coordinating -NMe(2) or -NEt(2) donor nitrogen atom the catalytic activity decreases slightly with no change in the selectivity. In contrast, upon replacing the pyridyl nitrogen donor by the strongly σ-bonding imidazolyl or sterically demanding quinolyl/benzimidazolyl nitrogen donor, both the catalytic activity and selectivity decrease, possibly due to destabilization of the intermediate [(4N)(CH(3)CN)Ni-O˙](+) radical species. Adamantane is selectively (3°/2°, 12-17) oxidized to 1-adamantanol, 2-adamantanol and 2-adamantanone while cumene is selectively oxidized to 2-phenyl-2-propanol. In contrast to cyclohexane oxidation, the incorporation of sterically hindering quinolyl/benzimidazolyl donors around Ni(ii) leads to a high 3°/2° bond selectivity for adamantane oxidation. A linear correlation between the metal-ligand covalency parameter (β) and the turnover number has been observed.     

Pincer-like amido complexes of platinum, palladium, and nickel

The ligands bis(8-quinolinyl)amine (BQAH, 1), (2-pyridin-2-yl-ethyl)-(8-quinolinyl)amine (2-pyridin-2-yl-ethyl-QAH, 2), o-dimethylaminophenyl(8-quinolinyl)amine (o-(NMe2)Ph-QAH, 3), and 3,5-dimethylphenyl(8-quinolinyl)amine (3,5-Me2Ph-QAH, 4) have been prepared in high yield from aryl halide and amine precursors by palladium-catalyzed coupling reactions. Deprotonation of 1 with nBuLi in toluene affords the lithium amide complex [Li][BQA] (5), whose dimeric solid-state crystal structure is presented. Lithium amide 5 was transmetalated by TlOTf to afford the thallium(I) amido complex [Tl][BQA] (6). An X-ray structural study of 6 shows it to be a 1:1 complex of the BQA ligand and Tl. Entry into the group 10 chemistry of the parent ligand 1 was effected by both protolytic and metathetical strategies. Thus, the divalent chloride complexes (BQA)PtCl (7), (BQA)PdCl (8), and (BQA)NiCl (9) were prepared and fully characterized. An X-ray structural study for each of these three complexes shows them to be well-defined, square-planar complexes in which the auxiliary BQA ligand binds in a planar, eta(3)-fashion. For comparison, the reactivity of ligands 2-4 with (COD)PtCl2 was studied. While reaction with ligand 2 afforded an ill-defined product mixture, ligands 3 and 4 reacted with (COD)PtCl2 to generate the unusual alkyl complexes (o-(NMe2)Ph-QA)Pt(1,2-eta(2)-6-sigma-cycloocta-1,4-dienyl) (10) and (3,5-Me2Ph-QA)Pt(1,2-eta(2)-6-sigma-cycloocta-1,4-dienyl) (11), both of which have been structurally characterized.     

Nitric oxide reactivity of copper(II) complexes of bidentate amine ligands: effect of substitution on ligand nitrosation

Three copper(ii) complexes with bidentate ligands L(1), L(2) and L(3) [L(1), N,N(/)-dimethylethylenediamine; L(2), N,N(/)-diethylethylenediamine and L(3), N,N(/)-diisobutylethylenediamine], respectively, were synthesized as their perchlorate salts. The single crystal structures for all the complexes were determined. The nitric oxide reactivity of the complexes was studied in acetonitrile solvent. The formation of thermally unstable [Cu(II)-NO] intermediate on reaction of the complexes with nitric oxide in acetonitrile solution was observed prior to the reduction of copper(II) centres to copper(I). The reduction was found to result with a simultaneous mono- and di-nitrosation at the secondary amine sites of the ligand. All the nitrosation products were isolated and characterized. The ratio of the yield of mono- and di-nitrosation product was found to be dependent on the N-substitution present in the ligand framework.     

Biomimetic iron(III) complexes of N3O and N3O2 donor ligands: protonation of coordinated ethanolate donor enhances dioxygenase activity

A series of iron(III) complexes 1-4 of the tripodal tetradentate ligands N,N-bis(pyrid-2-ylmethyl)-N-(2-hydroxyethyl)amine H(L1), N,N-bis(pyrid-2-ylmethyl)-N-(2-hydroxy- propyl)amine H(L2), N,N-bis(pyrid-2-ylmethyl)-N-ethoxyethanolamine H(L3), and N-((pyrid-2-ylmethyl)(1-methylimidazol-2-ylmethyl))-N-(2-hydroxyethyl)amine H(L4), have been isolated, characterized and studied as functional models for intradiol-cleaving catechol dioxygenases. In the X-ray crystal structure of [Fe(L1)Cl(2)] 1, the tertiary amine nitrogen and two pyridine nitrogen atoms of H(L1) are coordinated meridionally to iron(III) and the deprotonated ethanolate oxygen is coordinated axially. In contrast, [Fe(HL3)Cl(3)] 3 contains the tertiary amine nitrogen and two pyridine nitrogen atoms coordinated facially to iron(III) with the ligand ethoxyethanol moiety remaining uncoordinated. The X-ray structure of the bis(μ-alkoxo) dimer [{Fe(L5)Cl}(2)](ClO(4))(2)5, where HL is the tetradentate N(3)O donor ligand N,N-bis(1-methylimidazol-2-ylmethyl)-N-(2-hydroxyethyl)amine H(L5), contains the ethanolate oxygen donors coordinated to iron(III). Interestingly, the [Fe(HL)(DBC)](+) and [Fe(HL3)(HDBC)X] adducts, generated by adding ～1 equivalent of piperidine to solutions containing equimolar quantities of iron(III) complexes 1-5 and H(2)DBC (3,5-di-tert-butylcatechol), display two DBC(2-)→ iron(III) LMCT bands (λ(max): 1, 577, 905; 2, 575,915; 3, 586, 920; 4, 563, 870; 5, 557, 856 nm; Δλ(max), 299-340 nm); however, the bands are blue-shifted (λ(max): 1, 443, 700; 2, 425, 702; 3, 424, 684; 4, 431, 687; 5, 434, 685 nm; Δλ(max), 251-277 nm) on adding 1 more equivalent of piperidine to form the adducts [Fe(L)(DBC)] and [Fe(HL3)(HDBC)X]. Electronic spectral and pH-metric titration studies in methanol disclose that the ligand in [Fe(HL)(DBC)](+) is protonated. The [Fe(L)(DBC)] adducts of iron(III) complexes of bis(pyridyl)-based ligands (1,2) afford higher amounts of intradiol-cleavage products, whereas those of mono/bis(imidazole)-based ligands (4,5) yield mainly the auto-oxidation product benzoquinone. It is remarkable that the adducts [Fe(HL)(DBC)](+)/[Fe(HL3)(DBC)X] exhibit higher rates of oxygenation affording larger amounts of intradiol-cleavage products and lower amounts of benzoquinone.     

Tuning the photophysical behavior of luminescent cyclam derivatives by cation binding and excited state redox potential

The emission from two photoactive 14-membered macrocyclic ligands, 6-((naphthalen-1-ylmethyl)-amino)-trans-6,13-dimethyl-13-amino-1,4,8,11-tetraaza-cyclotetradecane (L1) and 6-((anthracen-9-ylmethyl)-amino)-trans-6,13-dimethyl-13-amino-1,4,8,11-tetraaza-cyclotetradecane (L2) is strongly quenched by a photoinduced electron transfer (PET) mechanism involving amine lone pairs as electron donors. Time-correlated single photon counting (TCSPC), multiplex transient grating (TG), and fluorescence upconversion (FU) measurements were performed to characterize this quenching mechanism. Upon complexation with the redox inactive metal ion, Zn(II), the emission of the ligands is dramatically altered, with a significant increase in the fluorescence quantum yields due to coordination-induced deactivation of the macrocyclic amine lone pair electron donors. For [ZnL2]2+, the substituted exocyclic amine nitrogen, which is not coordinated to the metal ion, does not quench the fluorescence due to an inductive effect of the proximal divalent metal ion that raises the ionization potential. However, for [ZnL1]2+, the naphthalene chromophore is a sufficiently strong excited-state oxidant for PET quenching to occur.     

Developing the {M(CO)3}+ core for fluorescence applications: Rhenium tricarbonyl core complexes with benzimidazole, quinoline, and tryptophan derivatives

Tridentate ligands derived from benzimidazole, quinoline, and tryptophan have been synthesized, and their reactions with [NEt4]2[Re(CO)3Br3] have been investigated. The complexes 1-4 and 6 and 7 exhibit fac-{Re(CO)3N3} coordination geometry in the cationic molecular units, while 5 exhibits fac-{Re(CO)3N2O} coordination for the neutral molecular unit, where N3 and N2O refer to the ligand donor groups. The ligands bis(1-methyl-1H-benzoimidazol-2-ylmethyl)amine (L1), [bis(1-methyl-1H-benzoimidazol-2-ylmethyl)amino]acetic acid ethyl ester (L2), [bis(1-methyl-1H-benzoimidazol-2-ylmethy)amino]acetic acid methyl ester (L3), [bis(quinolin-2-ylmethyl)amino]acetic acid methyl ester (L4), 3-(1-methyl-1H-indol-3-yl)-2-[(pyridin-2-ylmethyl)amino]propionic acid (L5), 2-[bis(pyridin-2-ylmethyl)amino]-3-(1-methyl-1H-indol-3-yl)propionic acid (L6), and 2-[bis(quinolin-2-ylmethyl)amino]-3-(1-methyl-1H-indol-3-yl)propionic acid (L7) were obtained in good yields and characterized by elemental analysis, 1D and 2D NMR, and high-resolution mass spectrometry (HRMS). The rhenium complexes were obtained in 70-85% yields and characterized by elemental analysis, 1D and 2D NMR, HRMS, IR, UV, and luminescence spectroscopy, as well as X-ray crystallography for [Re(CO)3(L1)]Br (1), {[Re(CO)3(L2)]Br}2.NEt4Br . 8.5H2O (3(2).NEt4Br . 8.5H2O), [Re(CO)3(L4)]Br (4), and [Re(CO)3(L6)]Br (6). Crystal data for C21H19BrN5O3Re (1): monoclinic, P2(1)/c, a = 13.1851(5) A, b = 16.1292(7) A, c = 10.2689(4) A, beta = 99.353(1) degrees , V = 2154.8(2) A3, Z = 4. Crystal data for C56H73Br3N11O18.50 Re2 (3(2).NEt4Br . 8.5H2O): monoclinic, C2/c, a = 34.7760(19) A, b = 21.1711(12) A, c = 20.3376(11) A, beta = 115.944(1) degrees , V = 13464.5(1) A3, Z = 8. Crystal data for C26H21BrN3O5Re (4): monoclinic, P2(1)/c, a = 16.6504(6) A, b = 10.1564(4) A, c = 14.6954(5) A, beta = 96.739(1) degrees , V = 2467.9(2) A3, Z = 4. Crystal data for C27H24BrN4O5Re (6): monoclinic, P2(1), a = 8.7791(9) A, b = 16.312(2) A, c = 8.9231(9) A, beta = 90.030(1) degrees , V = 1277.8(2) A3, Z = 2.     

Nitric oxide reactivity of copper(II) complexes of bidentate amine ligands: effect of chelate ring size on the stability of a [Cu(II)-NO] intermediate

Three copper(II) complexes, 1, 2, and 3 with L(1), L(2) and L(3) [L(1) = 2-(2-aminoethyl)-pyridine; L(2) = 2-(N-ethyl-2-aminoethyl)-pyridine; L(3) = 3,3'-iminobis(N,N-dimethylpropylamine)], respectively, were synthesized and characterized. Addition of nitric oxide gas to the degassed acetonitrile solution of the complexes were found to result in the reduction of the copper(II) center to copper(I). In cases of complexes 1 and 2, the formation of the [Cu(II)-NO] intermediate prior to the reduction of Cu(II) was evidenced by UV-visible, solution FT-IR and X-band EPR spectroscopic studies. However, for complex 3, the formation of [Cu(II)-NO] has not been observed. DFT calculations on the [Cu(II)-NO] intermediate generated from complex 1 suggest a distorted square pyramidal geometry with the NO ligand coordinated to the Cu(II) center at an equatorial site in a bent geometry. In the case of complex 1, the reduction of the copper(II) center by nitric oxide afforded ligand transformation through diazotization at the primary amine site in acetonitrile solution; whereas, in an acetonitrile-water mixture, it resulted in 2-(pyridine-2-yl)ethanol. On the other hand, in cases of complexes 2 and 3, it was found to yield N-nitrosation at the secondary amine site in the ligand frameworks. The final organic products, in each case, were isolated and characterized by various spectroscopic studies.     

Synthesis of new derivatized pyrazole based ligands and their catecholase activity studies

A synthesis of three new tripodal ligands: 3-[bis-(3,5-dimethyl-pyrazol-1-ylmethyl)-amino]-propan-1-ol L1, 3-[bis-(5-methyl-3-carbomethoxy-pyrazol-1-ylmethyl)-amino]-propan-1-ol, L2 and 3-[bis-(5-methyl-3-carboethoxy-pyrazol-1-ylmethyl)-amino]-propan-1-ol L3 is reported. The in situ-generated copper(II) complexes of three new compounds (L1–L3) were examined for their catalytic activities and were found to catalyse the oxidation reaction of catechol to o-quinone with the atmospheric dioxygen. These activities depend on the nature of the ligand and the copper salts.     

Unique example of flexible phenol coordination in mononuclear manganese compounds

The synthesis and characterization of six novel mononuclear Mn(II) and Mn(III) complexes are presented. The tripodal ligands 2-((bis(pyridin-2-ylmethyl)amino)methyl)-4-nitrophenol (HL1), 2-[[((6-methylpyridin-2-yl)methyl)(pyridin-2-ylmethyl)amino]methyl]-4-nitrophenol (HL2), (2-pyridylmethyl)(6-methyl-2-pyridylmethyl)(2-hydroxybenzyl)amine (HL3) and 2-((bis(pyridin-2-ylmethyl)amino)methyl)-4-bromophenol were used. All ligands provide an N3O donor set. The compounds [Mn(II)(HL1)Cl2].CH3OH (1), [Mn(III)(L1)Cl2] (2), [Mn(II)(HL2)(EtOH)Cl2] (3), [Mn(II)(HL3)Cl2].CH3OH (4), [Mn(III)(HL4)Br2] (5) and [Mn(III)(L1)(tcc)] (6), with tcc = tetrachlorocatecholate dianion, were synthesized and characterized by various techniques such as X-ray crystallography, mass spectrometry, IR and UV-vis spectroscopy, cyclic voltammetry, and elemental analysis. Compound 1 crystallizes in the triclinic space group P1, compounds 2, 3 and 4 were solved in the monoclinic space group P2(1)/c, whereas the structure determination of and succeeded in the orthorhombic space groups Pbca and P2(1)2(1)2(1), respectively. Notably, the crystal structures of 1 and 3 are the first Mn(II) complexes featuring a non-coordinating phenol moiety. Compound 2 oxidizes 3,5-di-tert-butylcatechol to 3,5-di-tert-butylquinone exhibiting saturation kinetics at high substrate concentrations with a turnover number of kcat = 173 h(-1). The electronic influence of different substituents in para position of the phenol group is lined out.     

Nitric oxide reduction of copper(II) complexes: spectroscopic evidence of copper(II)-nitrosyl intermediate

Two copper(II) complexes, 1 and 2 with L(1) and L(2) [L(1) = 2- aminomethyl pyridine; L(2) = bis-(2-aminoethyl)amine], respectively, in degassed acetonitrile solvent, on exposure to NO gas, were found to form a thermally unstable [Cu(II)-NO] intermediate which then resulted in the reduction of the copper(II) centers. The formation of the [Cu(II)-NO] intermediate was evidenced by UV-visible, FT-IR, and EPR spectroscopic studies. The reduction of the copper(II) centers by nitric oxide afforded ligand transformation through diazotization at the primary amine coordination site, in both cases. The modified ligands, in each case, were isolated and characterized.     

Tetradentate vs pentadentate coordination in copper(II) complexes of pyridylbis(aminophenol) ligands depends on nucleophilicity of phenol donors

The ligand binding preferences of a series of potentially pentadentate pyridylbis(aminophenol) ligands were explored. In addition to the previously reported ligands 2,2'-(2-methyl-2-(pyridin-2-yl)propane-1,3-diyl)bis(azanediyl)bis(methylene)diphenol (H(2)L(1)) and 6,6'-(2-methyl-2-(pyridin-2-yl)propane-1,3-diyl)bis(azanediyl)bis(methylene)bis(2,4-di-tert-butylphenol) (H(2)L(1-tBu)), four new ligands were synthesized: 6,6'-(2-methyl-2(pyridine-2-yl)propane-1,3-diyl)bis(azanediyl)bis(methylene)bis(2,4-dibromophenol) (H(2)L(1-Br)), 6,6'-(2-methyl-2(pyridine-2-yl)propane-1,3diyl)bis(azanediyl)bis(methylene)bis(2-methoxyphenol) (H(2)L(1-MeO)), 2,2'-(2-methyl-2(pyridine-2-yl)propane-1,3diyl)bis(azanediyl)bis(methylene)bis(4-nitrophenol) (H(2)L(1-NO2)), and 2,2'-(2-phenylpropane-1,3-diyl)bis(azanediyl)bis(methylene)diphenol (H(2)L(2)). These ligands, when combined with copper(II) salts and base, form either tricopper(II) species or monocopper(II) species depending on the nucleophilicity of the phenol groups in the ligands. All copper complexes were characterized by X-ray crystallography, cyclic voltammetry, and spectroscopic methods in solution. The ligands in trimeric complexes [{CuL(1)(CH(3)CN)}(2)Cu](ClO(4))(2) (1), [{CuL(1)Cl}(2)Cu] (1a), and [{CuL(2)(CH(3)CN)}(2)Cu](ClO(4))(2) (1b) and monomeric complex [CuL(1-tBu)(CH(3)OH)] (2) coordinate in a tetradentate mode via the amine N atoms and the phenolato O atoms. The pyridyl groups in 1, 1a, and 2 do not coordinate, but instead are involved in hydrogen bonding. Monomeric complexes [CuL(1-Br)] (3a), [CuL(1-NO2)] (3b), and [CuL(1-MeO)Na(CH(3)OH)(2)]ClO(4) (3c) have their ligands coordinated in a pentadentate mode via the amine N atoms, the phenolato O atoms, and the pyridyl N atom. The differences in tetradentate vs pentadentate coordination preferences of the ligands correlate to the nucleophilicity of the phenolate donor groups, and coincide with the electrochemical trends for these complexes.     

Dioxo-bridged dinuclear manganese(III) and -(IV) complexes of pyridyl donor tripod ligands: combined effects of steric substitution and chelate ring size variations on structural,spectroscopic, and electrochemical properties

The syntheses and structural, spectral, and electrochemical characterization of the dioxo-bridged dinuclear Mn(III) complexes [LMn(mo-O)(2)MnL](ClO(4))(2), of the tripodal ligands tris(6-methyl-2-pyridylmethyl)amine (L(1)) and bis(6-methyl-2-pyridylmethyl)(2-(2-pyridyl)ethyl)amine (L(2)), and the Mn(II) complex of bis(2-(2-pyridyl)ethyl)(6-methyl-2-pyridylmethyl)amine (L(3)) are described. Addition of aqueous H(2)O(2) to methanol solutions of the Mn(II) complexes of L(1) and L(2) produced green solutions in a fast reaction from which subsequently precipitated brown solids of the dioxo-bridged dinuclear complexes 1 and 2, respectively, which have the general formula [LMn(III)(mu-O)(2)Mn(III)L](ClO(4))(2). Addition of 30% aqueous H(2)O(2) to the methanol solution of the Mn(II) complex of L(3) ([Mn(II)L(3)(CH(3)CN)(H(2)O)](ClO(4))(2) (3)) showed a very sluggish change gradually precipitating an insoluble black gummy solid, but no dioxo-bridged manganese complex is produced. By contrast, the Mn(II) complex of the ligand bis(2-(2-pyridyl)ethyl)(2-pyridylmethyl)amine (L(3a)) has been reported to react with aqueous H(2)O(2) to form the dioxo-bridged Mn(III)Mn(IV) complex. In cyclic voltammetric experiments in acetonitrile solution, complex 1 shows two reversible peaks at E(1/2) = 0.87 and 1.70 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and the Mn(III)Mn(IV) <--> Mn(IV)(2) processes, respectively. Complex 2 also shows two reversible peaks, one at E(1/2) = 0.78 V and a second peak at E(1/2) = 1.58 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and Mn(III)Mn(IV) <--> Mn(IV)(2) redox processes, respectively. These potentials are the highest so far observed for the dioxo-bridged dinuclear manganese complexes of the type of tripodal ligands used here. The bulk electrolytic oxidation of complexes 1 and 2, at a controlled anodic potential of 1.98 V (vs Ag/AgCl), produced the green Mn(IV)(2) complexes that have been spectrally characterized. The Mn(II) complex of L(3) shows a quasi reversible peak at an anodic potential of E(p,a) of 1.96 V (vs Ag/AgCl) assigned to the oxidation Mn(II) to Mn(III) complex. It is about 0.17 V higher than the E(p,a) of the Mn(II) complex of L(3a). The higher oxidation potential is attributable to the steric effect of the methyl substituent at the 6-position of the pyridyl donor of L(3).     

Iron(III) complexes of tridentate 3N ligands as functional models for catechol dioxygenases: the role of ligand N-alkyl substitution and solvent on reaction rate and product selectivity

A series of iron(III) complexes of the type [Fe(L)Cl3], where L is the variously N-alkyl-substituted bis(pyrid-2-ylmethyl)amine ligand such as bis(pyrid-2-ylmethyl)amine (L1), N,N-bis(pyrid-2-ylmethyl)methylamine (L2), N,N-bis(pyrid-2-ylmethyl)-n-propylamine (L3), N,N-bis(pyrid-2-ylmethyl)-iso-butylamine (L4), N,N-bis(pyrid-2-ylmethyl)-iso-propylamine (L5), N,N-bis(pyrid-2-ylmethyl)cyclohexylamine (L6), and N,N-bis(pyrid-2-ylmethyl)-tert-butylamine (L7), have been isolated and characterized by elemental analysis and spectral and electrochemical methods. The crystal structures of the complexes [Fe(L2)Cl3] 2, [Fe(L3)Cl3] 3, and the complex-substrate adduct [Fe(L5)(TCC)(NO3)] 5a, where TCC2- is the tetrachlorocatecholate dianion, have been determined by single-crystal X-ray crystallography. The complexes [Fe(L2)Cl3] 2 and [Fe(L3)Cl3] 3 possess a distorted octahedral geometry, in which the linear tridentate 3N ligands are cis-facially coordinated to the iron(III) center, and three chloride ions occupy the remaining coordination sites. The replacement of the N-methyl group in 2 by N-n-propyl group as in 3 leads to the formation of the Fe-Npy bonds and also the Fe-Cl bonds located trans to them of different lengths. The catecholate adduct 5a also possesses a distorted octahedral geometry, in which the ligand is cis-facially coordinated to iron(III) center, TCC2- is asymmetrically chelated trans to the two pyridyl moieties of the ligand, and one of the oxygen atoms of the nitrate ion occupies the sixth coordination site. All of the present complexes have been interacted with simple and substituted catechols. The catecholate adducts [Fe(L)(DBC)Cl] and [Fe(L)(DBC)(Sol)]+, where H2DBC is 3,5-di-tert-butylcatechol and Sol=H2O/CH3CN, have been generated in situ, and their spectral and redox properties and dioxygenase activities have been studied in dimethylformamide and dichloromethane solutions. All of the complexes catalyze the cleavage of H2DBC using molecular oxygen to afford both intra- and extradiol cleavage products. The formation of extradiol cleavage products is facilitated by cis-facial coordination of the 3N ligands and availability of vacant coordination site on iron(III) center for dioxygen binding. It is remarkable that the nature of the N-alkyl substituent in 3N ligands controls the regioselectivity of cleavage, with the n-propyl, iso-butyl, iso-propyl, and cyclohexyl groups enhancing the yield of extradiol products (46-68%) in dichloromethane. The rate of oxygenation depends upon the solvent and the Lewis acidity of iron(III) center as modified by the sterically demanding N-alkyl groups-length and degree of substitution. The plot of log (kO2) versus energy of the low-energy DBC2--to-iron(III) LMCT band is linear, demonstrating the importance of the Lewis acidity of the iron(III) center in dictating the rate of the dioxygenase reaction.     

Ligand-directed molecular architectures: self-assembly of two-dimensional rectangular metallacycles and three-dimensional trigonal or tetragonal prisms

Three angular ditopic ligands (1,3-bis(benzimidazol-1-ylmethyl)-4,6-dimethylbenzene L(1), 1,3-bis(benzimidazol-1-ylmethyl)-2,4,6-trimethylbenzene L(2), and 1,4-bis(benzimidazol-1-ylmethyl)-2,3,5,6-tetramethylbenzene L(3)) and one tripodal ligand 1,3,5-tris(benzimidazol-1-ylmethyl)-2,4,6-trimethylbenzene L(4) have been prepared. Reaction of these shape-specific designed ligands with different metal salts affords a series of discrete molecular architectures: [Ag(2)L(1)(2)](BF(4))(2) 1, [Ag(2)L(2)(2)](CF(3)SO(3))(2) 2, [CF(3)SO(3)(-) subset Ag(2)L(3)(2)]CF(3)SO(3) 3, [CF(3)SO(3)(-) subset Ag(2)L(3)(3)]CF(3)SO(3) 4, [ClO(4)(-) subset Cu(2)L(2)(4)](ClO(4))(3) 5, [4H(2)O subset Ni(2)L(2)(4)Cl(4)].6H(2)O 6, [BF(4)(-) subset Ag(3)L(4)(2)](BF(4))(2) 7, [ClO(4)(-) subset Ag(3)L(4)(2)](ClO(4))(2) 8, and [CuI(3)(2-) subset Cu(3)L(4)(2)](2)[Cu(2)I(4)] 9. The compounds were characterized by elemental analysis, ESI-MS, IR, and NMR spectroscopy, and X-ray crystallography. 1 is a dinuclear metallacycle with 2-fold rotational symmetry in which two syn-conformational L(1) ligands are connected by two linearly coordinated Ag(+) ions. 2 and 3 are structurally related, consisting of rectangular structures assembled from two linearly coordinated Ag(+) ions and two L(2) or L(3) ligands. The structure of 4 is a trigonal prismatic box consisting of two Ag(+) ions in trigonal planar coordination linked by three L(3) ligands, while the structures of 5 and 6 are tetragonal prismatic cages constructed by two square planar Cu(2+) or Ni(2+) ions linked by four L(2) ligands. The topologies of 7-9 are similar to that of 4; however, these three structures are assembled from three linearly coordinated Ag(+) or Cu(+) ions and two tripodal ligands, representing an alternative strategy to assembling a trigonal prism. (1)H NMR and ESI-MS were utilized to elucidate the solution structures of these macrocycles.     

Nitric oxide binding and photodelivery based on ruthenium(II) complexes of 4-arylazo-3,5-dimethylpyrazole

Two fluorescent ligands, 3,5-dimethyl-4-(6'-sulfonylammonium-1'-azonaphthyl)pyrazole (dmpzn, 1) and 3,5-dimethyl-4-(4'-N,N'-dimethylaminoazophenyl)pyrazole (dmpza, 2) were obtained by condensation of ketoenolic derivatives with hydrazine. 1 and 2 formed the novel dinuclear complexes [(H(2)O)(3)ClRu(micro-L)(2)RuCl(H(2)O)(3)] (3 or 4) and [(H(2)O)(NO)Cl(2)Ru(micro-L)(2)RuCl(2)(NO)(H(2)O)] (6 or 7) (where L 1 = 2 or , respectively) which were characterized by IR, NMR and elemental analysis. The nitrosyl complexes were prepared by bubbling purified nitric oxide through methanol solutions of the corresponding ruthenium(II) chloroderivative or by reaction of the appropriate ligands with Ru(NO)Cl(3). Complexes 3 and 4 were found to bind NO, resulting in an increase in fluorescence. Ligand 1 also formed the mononuclear nitrosyl complex [Ru(NO)(bpy)(2)(dmpzn)]Cl(2) (8) which released NO in water at physiological pH and in the solid state as revealed by fluorescence and IR measurements, respectively.     

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe相似文献