Estimation of molecular diffusivity in liquid phase systems by the Wilke-Chang equation

This study deals with the application of the Wilke-Chang equation to the estimation of molecular diffusivity (Dm) in liquid phase systems including polar solutes and/or solvents. First, Dm of benzene in six different organic solvents was experimentally measured by the peak parking method. The value of association coefficient (α) was calculated from the Dm values by assuming that Dm can be represented by the Wilke-Chang equation. Then, the α value was correlated with the solubility parameter (δ) and ET of the solvents. Two different curved correlations were observed between α and the two physico-chemical parameters. This means that α of given solutes and solvents can be obtained from the values of δ and/or ET. Finally, Dm was estimated by a modified Wilke-Chang equation, which is derived by considering the aggregation of not only solvent molecules but also solute molecules. Although α is necessary for the estimation, it was calculated from δ for various solutes and solvents. The Dm values estimated were compared with those reported in literature. The mean square deviation between the Dm values was calculated less than 19% for 71 Dm data. It was demonstrated that the modified Wilke-Chang equation can be used for estimating Dm in liquid phase systems containing polar solutes and solvents.     

Study of preferential solvation of 2,6-diaminoanthraquinone in binary mixtures by absorption and fluorescence studies

The role of solute-solvent and solvent-solvent interaction on the preferential solvation characteristics of 2,6-diaminoanthraquinone (DAAQ) has been analysed by monitoring the optical absorption and fluorescence emission spectra. Binary mixtures consist of dimethylformamide (DMF)-ethanol (EtOH), DMF-dimelthylsulfoxide (DMSO), benzene (BZ)-DMF and acetonitrile (ACN)-DMF. The optical absorption spectra maximum and emission spectra maximum of DAAQ show the changes with varying the solvents and change in the composition in the case of binary mixtures. Non-ideal solvation characteristics are observed in all binary mixtures. It is found that at certain concentrations two mixed solvents interact to form a common structure with a nu(12) (wave number in cm(-1)) value not always intermediate (nu(1) and nu(2)) between the values of the solvents mixed. Synergistic effect is observed in the case of DMF-EtOH mixtures. The preferential solvation parameters local mole fraction X(2)(L), solvation index delta(S2), exchange constant K(12) are calculated in all binary mixtures expect in the case of DMF-BZ mixture and DMF-EtOH mixture in the ground state. We have also monitored excitation wavelength effect on the probe molecule in aprotic polar and protic polar solvents.     

Tracking the Micro-Heterogeneity and Hydrogen-Bonding Interactions in Hydroxyl-Functionalized Ionic Liquid Solutions: A Combined Experimental and Computational Study

Ionic liquids (ILs) are an important class of media that are usually used in combination with polar solvents to reduce costs and tune their physicochemical properties. In this regard, it is essential to understand the influence of adding solvents on the properties of ILs. In this work, the micro-heterogeneity and H-bonding interactions between a hydroxyl-functionalized IL, [HOEmim][TFSI], and acetonitrile (ACN) were investigated by attenuated total reflection Fourier transform infrared spectroscopy and molecular simulations. All studied IL-ACN mixtures were found to deviate from the ideal mixtures. The degree of deviations reaches the maximum at about x(ACN)=0.7 with the presence of both homogeneous clusters of pure IL/ACN and heterogeneous clusters of IL-ACN. With the addition of ACN to IL, the mixtures undergo the transformation from “ACN solvated in [HOEmim][TFSI]” to “[HOEmim][TFSI] solvated in ACN”. It is found that the newly formed H-bonding interactions between the IL and ACN is the main factor that contributes to the red shifts of O−H, C₂−H, C_4,5−H, and C_alkyl−H of [HOEmim]⁺ cation, and the blue shifts of C−D, C≡N of ACN, and C−F, S=O of [TFSI]⁻ anion. These in-depth studies on the mixtures of hydroxyl-functionalized IL and acetonitrile would help to understand the micro-heterogeneity and H-bonding interactions of miscible solutions and shed light on exploring their applications.     

On the relationship between band broadening and the particle-size distribution of the packing material in liquid chromatography: theory and practice

The influence of the particle size distribution (PSD) on the band broadening and the efficiency of packed columns is investigated on both theoretical and practical viewpoints. Each of the classical contributions to mass transfer kinetics, those due to longitudinal diffusion, eddy dispersion, and solid–liquid mass transfer resistance are measured and analyzed in terms of their expected and observed intensity as a function of the PSD of mixtures of the commercially available packing materials, 5 and 3 μm Luna-C₁₈(2) particles (Phenomenex, Torrance, CA, USA). Six 4.6 mm × 150 mm columns were packed with different mixtures of these two materials. The efficiencies of these columns were measured for a non-retained and a retained analytes in a mixture of acetonitrile and water. The longitudinal diffusion coefficient was directly measured by the peak parking method. The solid–liquid mass transfer coefficient was measured from the combination of the peak parking method, the best model of effective diffusion coefficient and the actual PSDs of the different particle mixtures measured by Coulter counter experiments. The eddy diffusion term was measured according to a recently developed protocol, by numerical integration of the peak profiles. Our results clearly show that the PSD has no measurable impact on any of the coefficients of the van Deemter equation. On the contrary and surprisingly, adding a small fraction of large particles to a batch of small particles can improve the quality of the packing of the fine particles. Our results indirectly confirm that the success of sub-3 μm shell particles is due to the roughness of their external surface, which contributes to eliminate most of the nefarious wall effects.     

三种芳烃溶剂在低密度聚乙烯膜材料中无限稀释扩散系数的测定

用气相色谱法测定了苯、甲苯和乙苯在固定液低密度聚乙烯中的保留时间和半峰宽,运用vanDeemter模型进行数据处理,得到3种芳烃小分子在低密度聚乙烯膜材料中的无限稀释扩散系数.     

Multi-location peak parking method: an important new tool for the study of mass transfer kinetics in liquid chromatography

The peak parking (PP) method probes the longitudinal diffusion coefficient of a compound at a single location along the chromatographic column. We extended to a so-called multi-location peak parking (MLPP) method, in which a large number of axial locations along the column are selected in order to check the validity of the conventional PP method and to reveal possible defaults in the structure of the packed bed or pitfalls of the PP and the MLPP methods. MLPP was applied to a series of HILIC columns, including a 5.0 μm Venusil, a 3.0 μm Luna-diol, three 2.7 μm Halo, and a 1.7 μm Kinetex columns. The results demonstrate that the MLPP method may reveal local heterogeneities in the axial diffusion of small retained low molecular weight compounds along the column. Most importantly, experiments show that the sample zone should not be parked in the entrance of the column (i.e., at <1/10 th of the column length). The abrupt drop in the flow rate considerably affects the peak shape and prevents scientists from using the conventional PP method. Practical solutions to cope with that problem are proposed and their success/failure are discussed.     

Calculation of Density for Mixtures of Carbon Dioxide with Nitrogen and Methane from the ISM Equation of State

In this paper the analytical equation of state (EoS) proposed by Ihm‐Song‐Mason was applied to calculate molar volume of mixtures of carbon dioxide with nitrogen and methane. The pair interaction potential has been used to evaluate the second virial coefficients and the ISM EoS parameters (i.e. α and b). The calculated values of the aforesaid quantities were applied to predict the molar volumes for mixtures of carbon dioxide with nitrogen and methane. Agreement with experiment was excellent for both mixtures.     

Determination of palladium by graphite furnace atomic absorption spectroscopy without matrix matching

A graphite furnace atomic absorption spectroscopy method for the analysis of the palladium (Pd) content in bulk pharmaceutical drug substances and their intermediates prepared in aqueous solutions is extended to samples prepared in acetonitrile (ACN) and ACN-water mixtures as well to samples prepared in dimethyl sulfoxide (DMSO) and DMSO-water mixtures. The Pd content in samples solubilized in these solvents can be accurately determined with calibration established with standards prepared in aqueous solutions without matrix matching or using the method of standard additions. The validity of this method is demonstrated by spike recovery studies and by the agreement with results for the same samples prepared in these solvents, in concentrated nitric acid, and prepared by a microwave digestion system.     

Incorporation of carbon nanotubes in a silica HPLC column to enhance the chromatographic separation of peptides: theoretical and practical aspects

The retention mechanism of a series of peptides on a single-wall carbon nanotube (SWCNT) stationary phase inside an HPLC column was investigated over a wide range of mobile phase compositions. While the similar size C18 column exhibited an efficiency of 11.5 μm, the SWCNT column increased the efficiency, i.e. 7.10 μm at a flow rate of 0.8 mL/min, and significantly affected the separation quality of the peptides. The values of enthalpy (ΔH) and entropy (ΔS(*)) of transfer of the peptides from the mobile to the SWCNT stationary phase were determined. The method studied each factor, i.e. ACN fraction x in the ACN/water mixture and column temperature. The changes in retention factor, ΔH and ΔS(*) as a function of the ACN fraction in the mobile phase were examined. These variations are explained using the organization of ACN in clusters in the ACN/water mixture and on the steric and electronic forces implied in the retention process. The information obtained in this work makes this SWCNT stationary phase useful for peptide research and demonstrated the role of ACN to improve the separation quality.     

Effect of solvent in radical polymerization of butadiene 1-carboxylic acid

The radical polymerization and copolymerization of butadiene 1-carboxylic acid (Bu-1-Acid) were studied in a variety of the electron-donor solvents such as dimethylformamide (DMF), tetrahydrofuran (THF), methyl ethyl ketone (MEK), acetonitrile (ACN), and benzene (BZ) using AIBN as an initiator at 50°C. Under these conditions, the polymerization rate of Bu-1-Acid increased in the order, DMF < THF < MEK < ACN < BZ in the various solvents. In copolymerization with styrene [M₂] and acrylonitrile [M₂], the monomer reactivity ratio r₁ increased and r₂ decreased in the same order. Moreover, it was found that Alfrey-Price Q-e value of Bu-1-Acid increased depending on solvent in the order DMF < THF < MEK < ACN < BZ. These variations were correlated to the electron-donating power (Δvcm^?) of the solvents used and are discussed on the basis of the solvation of Bu-1-Acid into the solvent. Also, it was found that the microstructures of these polymers were always trans-1,4 and did not change with the solvent used.     

A diffusion model of the pervaporation separation of ethylene glycol-water mixtures through crosslinked poly(vinyl alcohol) membrane

The pervaporation separation of ethylene glycol-water mixtures was carried out over the full range of compositions at temperatures varying from 60 to 80°C, using chemically crosslinked PVA dense membrane which had been developed in our laboratory. A new thermodynamic diffusion coefficient equation is derived based on the modified Vigne equation. Combining Lee-Thodos equations, Wilke-Chang equations, Vrentas-Duda's free volume theory, diffusion equations and swelling equilibrium equations, the permeation fluxes of individual components in ethylene glycol-water mixture through crosslinked poly(vinyl alcohol) (PVA) dense membrane have been calculated and showed to be in agreement with the experimental values.     

线性变位极谱研究 V:碲的吸附电流方程式

The mechanism of the electroreduction of Te(IV) has been studied, it is (TeO3)2- + 3H2O + 4e = (Teads)0 + 6OH- (1) (Teads)0 + H2O + 2e = (Hte)- + OH- (Teads)0 + 2e = Te2- The reaction scheme can generally be expressed as follows: ACcordingly, the equation of adsorptive current is give: i = 0.629 n2**2F**i/RT \n\(D0)1/2m2/3t7/6 \Pn\/(1+\Pn\)**2 (C0)* where \Pn\ = bAtA,7exp n2F/RT (E-E0)/& When \Pn\ = 1 the current reaches the maximum, ip = 0.157 n2**2F**2/RT \n\(D0)1/2m2/3t7/6(C0)* This equation shows that the peak current ip is proportional to m2/3t7/6, the ratio of potential change v and the concentration of the substance O being reduced. The half wave width, w1/2, can be obtained from the equation (6) in the form of the following expression W1/2 = 3.52RT/n2F The theoretical conclusions are in good agreement with experimental data for the adsorptive wave of tellurium in 0.25M NH3-NH4cl solution. The diffusion coefficient value determined agrees with that obtained by other polarographic method reported in the literature.     

Evaluation of excess molar polarization in binary mixtures of Polar–Nonpolar liquids

Excess molar polarization in the binary mixture of polar solutes (acetic acid, n-tributyl phosphate) in nonpolar solvents (benzene, tetrachloromethane, p-xylene) is evaluated with the help of our proposed equation. The results have been compared with those obtained from a previously proposed equation. It is observed that our proposed equation is more accurate to interpret the liquid structure and molecular association in the binary liquid mixtures.     

Novel highly hydrophilic methacrylate-based monolithic column with mixed-mode of hydrophilic and strong cation-exchange interactions for pressurized capillary electrochromatography

A novel highly hydrophilic polymethacrylate-based monolithic stationary phase based on the copolymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) and pentaerythritol triacrylate (PETA) was designed for pressurized capillary electrochromatography. A typical hydrophilic interaction chromatography mechanism could be observed when the content of acetonitrile (ACN) in the mobile phase exceeded 25%. Slight swelling or shrinking with mobile phases of different polarity was observed in permeability studies. Good retentions and efficient separations of polar analytes, such as neutral amides and phenols, were well achieved in hydrophilic interaction chromatography mode with only about 50% ACN content in the mobile phase. It was remarkably lower than the content of ACN (>90%) used on the hydrophilic polymethacrylate-based monoliths reported previously. Additionally, a mixed mode of hydrophilic interaction (HI) and strong cation-exchange (SCX) could be also obtained in the analysis of charged peptides, and high column efficiency up to 80,000 plates/m was achieved without peak tailing. The prepared hydrophilic stationary phase might provide a potential environmental friendly separation media for polar solutes as it consumes a low volume of organic solvents.     

Non-aqueous solvation of n-octanol and ethanol: spectroscopic and computational studies

Raman spectroscopy was used to examine the interactions of the free O-H bonds in n-octanol and ethanol with the organic solvents carbon tetrachloride (CCl(4)), cyclohexane, and benzene. These spectra reveal that the solvents CCl(4) and cyclohexane have a small effect on the free O-H peak of alcohols, whereas benzene as a solvent significantly red-shifts the free O-H band. Calculated spectra were generated via MP2/6-31G* calculations and the B3LYP/6-31+G**//MP2/6-31G*-derived Boltzmann populations of each ethanol complex and are consistent with the experimental results. Additional spectra were calculated using Boltzmann populations derived from single-point energies at the polarizable continuum model (PCM) level with the B3LYP/6-31+G** level of theory to take overall solvent effects into account, and these simulated spectra are also largely consistent with the experimental results. Analysis of the computational results reveals a lengthening of the O-H bond from the O-H interaction with the delocalized electronic structure of benzene as well as a bimodal distribution of the free O-H peak of the alcohol/benzene mixtures due to two distinctly different types of alcohol/benzene complexes.     

Anionic Polymerization of Styrene in Binary Solvents

Experimental findings on the triple ion formation were examined by adopting more elaborate purification method for solvents. For polystyryllithium in dimethoxyethane (DME) and benzene mixtures, the overall rate constant of propagation (k_p) was confirmed to increase with increasing living end concentration under some conditions, in contrast with cases for polystyryllithium in tetrahydrofuran-benzene mixtures and for polystyryl sodium, potassium and cesium in DME-benzene mixtures. The propagation by the inter-molecular triple ions proposed earlier in order to elucidate the kinetic “anomaly” mentioned above was briefly discussed.     

Selective extraction of derivates of p-hydroxy-benzoic acid from plant material by using a molecularly imprinted polymer

Selective SPE of derivates of p-hydroxybenzoic acid (pHBA) from plant extract of Melissa officinalis is presented using a molecularly imprinted polymer (MIP) made with protocatechuic acid (PA) as template molecule. MIP was prepared with acrylamide as functional monomer, ethylene glycol dimethacrylate as crosslinking monomer and ACN as porogen. MIP was evaluated towards six phenolic acids: PA, gallic acid, pHBA, vanillic acid (VA), gentisic acid (GeA) and syringic acid (SyrA), and then steps of molecularly imprinted SPE (MISPE) procedure were optimized. The best specific binding capacity of MIP was obtained for PA in ACN (34.7 microg/g of MIP). Other tested acids were also bound on MIP if they were dissolved in this solvent. ACN was chosen as solvent for sample application. M. officinalis was extracted into methanol/water (4:1, v/v), the extract was then evaporated to dryness and dissolved in ACN before application on MIP. Water and ACN were used as washing solvents and elution of benzoic acids was performed by means of a mixture methanol/acetic acid (9:1, v/v). pHBA, GA, PA and VA were extracted with recoveries of 56.3-82.1% using this MISPE method. GeA was not determined in plant extract.     

Measurement of the eddy diffusion term in chromatographic columns. I. Application to the first generation of 4.6mm I.D. monolithic columns

The corrected heights equivalent to a theoretical plate (HETP) of three 4.6mm I.D. monolithic Onyx-C(18) columns (Onyx, Phenomenex, Torrance, CA) of different lengths (2.5, 5, and 10 cm) are reported for retained (toluene, naphthalene) and non-retained (uracil, caffeine) small molecules. The moments of the peak profiles were measured according to the accurate numerical integration method. Correction for the extra-column contributions was systematically applied. The peak parking method was used in order to measure the bulk diffusion coefficients of the sample molecules, their longitudinal diffusion terms, and the eddy diffusion term of the three monolithic columns. The experimental results demonstrate that the maximum efficiency was 60,000 plates/m for retained compounds. The column length has a large impact on the plate height of non-retained species. These observations were unambiguously explained by a large trans-column eddy diffusion term in the van Deemter HETP equation. This large trans-rod eddy diffusion term is due to the combination of a large trans-rod velocity bias (?3%), a small radial dispersion coefficient in silica monolithic columns, and a poorly designed distribution and collection of the sample streamlets at the inlet and outlet of the monolithic rod. Improving the performance of large I.D. monolithic columns will require (1) a detailed knowledge of the actual flow distribution across and along these monolithic rod and (2) the design of appropriate inlet and outlet distributors designed to minimize the nefarious impact of the radial flow heterogeneity on band broadening.     

Nonaqueous and aqueous-organic media for the enantiomeric separations of neutral organophosphorus pesticides by CE

The enantiomeric separation of some poorly water-soluble organophosphorus pesticides (OPs) has been investigated using nonaqueous solvent and aqueous-organic solvent systems. In this work, sodium cholate (SC) either with SDS or gamma-CD was used to achieve enantiomeric separations of four neutral and poorly water-soluble OPs, i.e., profenofos, prothiofos, sulprofos, and pyraclofos. Electrophoretic medium consisted of a mixture of methanol (MeOH) with ACN (4:1 v/v) or a mixture of MeOH with H(2)O and ACN (5:4:1 v/v/v). On one hand, NACE was applied for enantiomeric separation of pyraclofos using a large amount of chiral and achiral surfactants (SC and SDS). On the other hand, H(2)O was added to act as a solvent additive to increase the solubility of gamma-CD in the organic solvents such as MeOH and ACN, in which the solubility of gamma-CD was very low. The presence of H(2)O was found to be particularly useful for the enantiomeric separation of profenofos, prothiofos, and sulprofos. In this way, the range of application of the neutral CDs in CE has been extended. In addition, SC was used as the only electrolyte. The proposed method has been applied for the analysis of soil samples.     

Effect of Solvent Polarity on Excited-State Double Proton Transfer Process of 1, 5-Dihydroxyanthraquinone

The excited-state double proton transfer (ESDPT) properties of 1, 5-dihydroxyanthraquinone (1, 5-DHAQ) in various solvents were investigated using femtosecond transient absorption spectroscopy and the DFT/TDDFT method. The steady-state fluorescence spectra in toluene, tetrahydrofuran (THF) and acetonitrile (ACN) solvents presented that the solvent polarity has an effect on the position of the ESDPT fluorescence emission peak for the 1, 5-DHAQ system. Transient absorption spectra show that the increasing polarity of the solvent accelerates the rate of excited state dynamics. Calculated potential energy curves analysis further verified the experimental results. The ESDPT barrier decreases gradually with the increase of solvent polarity from toluene, THF to ACN solvent. It is convinced that the increase of solvent polarity can promote the occurrence of the ESDPT dynamic processes for the 1, 5-DHAQ system. This work clarifies the mechanism of the influence of solvent polarity on the ESDPT process of 1, 5-DHAQ, which provides novel ideas for design and synthesis of new hydroxyanthraquinone derivatives.