Determination of the gas-phase acidities of cysteine-polyalanine peptides using the extended kinetic method

We determined the gas-phase acidities of two cysteine-polyalanine peptides, HSCA3 and HSCA4, using a triple-quadrupole mass spectrometer through application of the extended kinetic method with full entropy analysis. Five halogenated carboxylic acids were used as the reference acids. The negatively charged proton-bound dimers of the deprotonated peptides with the conjugate bases of the reference acids were generated by electrospray ionization. Collision-induced dissociation (CID) experiments were carried out at three collision energies. The enthalpies of deprotonation (Delta(acid)H) of the peptides were derived according to the linear relationship between the logarithms of the CID product ion branching ratios and the differences of the gas-phase acidities. The values were determined to be Delta(acid)H(HSCA3) = 317.3 +/- 2.4 kcal/mol and Delta(acid)H (HSCA4) = 316.2 +/- 3.9 kcal/mol. Large entropy effects (Delta(DeltaS) = 13-16 cal/mol K) were observed for these systems. Combining the enthalpies of deprotonation with the entropy term yielded the apparent gas-phase acidities (Delta(acid)G(app)) of 322.1 +/- 2.4 kcal/mol (HSCA3) and 320.1 +/- 3.9 kcal/mol (HSCA4), in agreement with the results obtained from the CID-bracketing experiments. Compared with that in the isolated cysteine residue, the thiol group in HSCA3,4 has a stronger gas-phase acidity by about 20 kcal/mol. This increased acidity is likely due to the stabilization of the negatively charged thiolate group through internal solvation.     

Regioselective difunctionalization of pyridines via 3,4-pyridynes

A new regioselective 3,4-difunctionalization of 3-chloropyridines via 3,4-pyridyne intermediates is reported. Regioselective lithiation of 3-chloro-2-ethoxypyridine and a related 2-thio-derivative followed by treatment with aryl- and alkylmagnesium halides as well as magnesium thiolates at −78 °C produced 3,4-pyridynes during heating to 75 °C. Regioselective addition of the Grignard moiety in position 4 followed by an electrophilic quench in position 3 led to various 2,3,4-trisubstituted pyridines. This method was adapted into a continuous flow set-up. As an application, we have prepared a key intermediate for (±)-paroxetine.

A regioselective 3,4-difunctionalization of pyridines was performed. Lithiation and transmetalation with arylmagnesiums gave 3,4-pyridyne intermediates. Addition of magnesium species led to 3-pyridylmagnesiums which were quenched with electrophiles.     

Thermochemistry of the gaseous vanadium chlorides VCl, VCl2, VCl3, and VCl4

Gaseous equilibria in the V-Ag-Cl system were studied at elevated temperatures by effusion-beam mass spectrometry, where the pertinent species were generated by reaction of Cl 2(g) with V + Ag granules in the effusion cell source. Reaction enthalpies were derived from the equilibrium data, and the standard enthalpies of formation at 298 K of gaseous VCl, VCl2, and VCl3 were found to be +49.7, -34.8, and -85.6 kcal mol(-1), respectively. The corresponding bond dissociation energies at 298 K are D(V-Cl) = 102.9 kcal, D(ClV-Cl) = 113.5 kcal, D(Cl2V-Cl) = 79.8 kcal, and D(Cl3V-Cl) = 69.5 kcal. From these data, the dissociation energy D degrees 0(VCl) = 101.9 kcal mol(-1) or 4.42 eV is obtained. An alternate value, Delta(f)H(o)298(VCl 3,g) = -87.0 kcal mol (-1) was derived from third-law analysis of literature sublimation data for VCl3(s). In addition, literature thermochemical data on VCl4(g) were re-evaluated, leading to Delta(f)H(o)298 = -126.1 kcal mol (-1). The results are compared with various estimates in the literature.     

Time resolved infrared spectroscopy: kinetic studies of weakly binding ligands in an iron-iron hydrogenase model compound

Solution photochemistry of (μ-pdt)[Fe(CO)(3)](2) (pdt = μ(2)-S(CH(2))(3)S), a precursor model of the 2-Fe subsite of the H-cluster of the hydrogenase enzyme, has been studied using time-resolved infrared spectroscopy. Following the loss of CO, solvation of the Fe center by the weakly binding ligands cyclohexene, 3-hexyne, THF, and 2,3-dihydrofuran (DHF) occurred. Subsequent ligand substitution of these weakly bound ligands by pyridine or cyclooctene to afford a more stable complex was found to take place via a dissociative mechanism on a seconds time scale with activation parameters consistent with such a pathway. That is, the ΔS(?) values were positive and the ΔH(?) parameters closely agreed with bond dissociation enthalpies (BDEs) obtained from DFT calculations. For example, for cyclohexene replacement by pyridine, experimental ΔH(?) and ΔS(?) values were determined to be 19.7 ± 0.6 kcal/mol (versus a theoretical prediction of 19.8 kcal/mol) and 15 ± 2 eu, respectively. The ambidentate ligand 2,3-DHF was shown to initially bind to the iron center via its oxygen atom followed by an intramolecular rearrangement to the more stable η(2)-olefin bound species. DFT calculations revealed a transition state structure with the iron atom almost equidistant from the oxygen and one edge of the olefinic bond. The computed ΔH(?) of 10.7 kcal/mol for this isomerization process was found to be in excellent agreement with the experimental value of 11.2 ± 0.3 kcal/mol.     

Theoretical study of the equilibrium structure, vibrational spectrum, and thermochemistry of the peroxynitrate CF2BrCFBrOONO2

The results of a theoretical study of the molecular structure and conformational mobilities of the peroxynitrate CF(2)BrCFBrOONO(2) and its radical decomposition product CF(2)BrCFBrOO are reported in this paper. The most stable structures were calculated from ab initio G3(MP2)B3 and G4(MP2) methods and from density functional theory at the B3LYP/6-311+G(d) and B3LYP/6-311+G(3df) levels of theory. The equilibrium conformation of CF(2)BrCFBrOONO(2) indicates that the bromine atoms lie in position anti to each other and possess a COON dihedral angle of 114°. A quantum statistical analysis shows that about 40% of the internal rotors can freely rotate at room temperature. Our best values for the standard enthalpies of formation of CF(2)BrCFBrOONO(2) and CF(2)BrCFBrOO at 298 K obtained from isodesmic reactions at the G3(MP2)//B3LYP/6-311+G(3df) level of theory are -144.7 and -127.0 kcal mol(-1). From these values and the enthalpy of formation of the NO(2) radical, a CF(2)BrCFBrOO-NO(2) bond dissociation enthalpy of 26.0 ± 2 kcal mol(-1) was estimated.     

Negative-ion photoelectron spectroscopy, gas-phase acidity, and thermochemistry of the peroxyl radicals CH(3)OO and CH(3)CH(2)OO

Methyl, methyl-d(3), and ethyl hydroperoxide anions (CH(3)OO(-), CD(3)OO(-), and CH(3)CH(2)OO(-)) have been prepared by deprotonation of their respective hydroperoxides in a stream of helium buffer gas. Photodetachment with 364 nm (3.408 eV) radiation was used to measure the adiabatic electron affinities: EA[CH(3)OO, X(2)A' '] = 1.161 +/- 0.005 eV, EA[CD(3)OO, X(2)A' '] = 1.154 +/- 0.004 eV, and EA[CH(3)CH(2)OO, X(2)A' '] = 1.186 +/- 0.004 eV. The photoelectron spectra yield values for the term energies: Delta E(X(2)A' '-A (2)A')[CH(3)OO] = 0.914 +/- 0.005 eV, Delta E(X(2)A' '-A (2)A')[CD(3)OO] = 0.913 +/- 0.004 eV, and Delta E(X(2)A' '-A (2)A')[CH(3)CH(2)OO] = 0.938 +/- 0.004 eV. A localized RO-O stretching mode was observed near 1100 cm(-1) for the ground state of all three radicals, and low-frequency R-O-O bending modes are also reported. Proton-transfer kinetics of the hydroperoxides have been measured in a tandem flowing afterglow-selected ion flow tube (FA-SIFT) to determine the gas-phase acidity of the parent hydroperoxides: Delta(acid)G(298)(CH(3)OOH) = 367.6 +/- 0.7 kcal mol(-1), Delta(acid)G(298)(CD(3)OOH) = 367.9 +/- 0.9 kcal mol(-1), and Delta(acid)G(298)(CH(3)CH(2)OOH) = 363.9 +/- 2.0 kcal mol(-1). From these acidities we have derived the enthalpies of deprotonation: Delta(acid)H(298)(CH(3)OOH) = 374.6 +/- 1.0 kcal mol(-1), Delta(acid)H(298)(CD(3)OOH) = 374.9 +/- 1.1 kcal mol(-1), and Delta(acid)H(298)(CH(3)CH(2)OOH) = 371.0 +/- 2.2 kcal mol(-1). Use of the negative-ion acidity/EA cycle provides the ROO-H bond enthalpies: DH(298)(CH(3)OO-H) = 87.8 +/- 1.0 kcal mol(-1), DH(298)(CD(3)OO-H) = 87.9 +/- 1.1 kcal mol(-1), and DH(298)(CH(3)CH(2)OO-H) = 84.8 +/- 2.2 kcal mol(-1). We review the thermochemistry of the peroxyl radicals, CH(3)OO and CH(3)CH(2)OO. Using experimental bond enthalpies, DH(298)(ROO-H), and CBS/APNO ab initio electronic structure calculations for the energies of the corresponding hydroperoxides, we derive the heats of formation of the peroxyl radicals. The "electron affinity/acidity/CBS" cycle yields Delta(f)H(298)[CH(3)OO] = 4.8 +/- 1.2 kcal mol(-1) and Delta(f)H(298)[CH(3)CH(2)OO] = -6.8 +/- 2.3 kcal mol(-1).     

Reactivity of alkyl versus silyl peroxides. The consequences of 1, 2-silicon bridging on the epoxidation of alkenes with silyl hydroperoxides and bis(trialkylsilyl)peroxides

The bond dissociation energies for a series of silyl peroxides have been calculated at the G2 and CBS-Q levels of theory. A comparison is made with the O-O BDE of the corresponding dialkyl peroxides, and the effect of the O-O bond strength on the activation barrier for oxygen atom transfer is discussed. The O-O bond dissociation enthalpies (DeltaH(298)) for bis (trimethylsilyl) peroxide (1) and trimethylsilyl hydroperoxide (2) are 54.8 and 53.1 kcal/mol, respectively at the G2 (MP2) and CBS-Q levels of theory. The O-O bond dissociation energies computed at G2 and G2(MP2) levels for bis(tert-butyl) peroxide and tert-butyl hydroperoxide are 45.2 and 48.3 kcal/mol, respectively. The barrier height for 1,2-methyl migration from silicon to oxygen in trimethylsilyl hydroperoxide is 47.9 kcal/mol (MP4//MP2/6-31G). The activation energy for the oxidation of trimethylamine to its N-oxide by bis(trimethylsilyl) peroxide is 28.2 kcal/mol (B3LYP/6-311+G(3df,2p)// B3LYP/6-31G(d)). 1,2-Silicon bridging in the transition state for oxygen atom transfer to a nucleophilic amine results in a significant reduction in the barrier height. The barrier for the epoxidation of E-2-butene with bis(dimethyl(trifluoromethyl))silyl peroxide is 25.8 kcal/mol; a reduction of 7.5 kcal/mol relative to epoxidation with 1. The activation energy calculated for the epoxidation of E-2-butene with F(3)SiOOSiF(3) is reduced to only 2.2 kcal/mol reflecting the inductive effect of the electronegative fluorine atoms.     

Theoretical study of the nitroalkane thermolysis. 1. Computation of the formation enthalpy of the nitroalkanes, their isomers and radical products

The gas phase enthalpies of formation of mono-, di-, tri-, tetranitromethane and nitroethane, as well as of their nitrite and aci-form isomers were calculated using different multilevel (G2, G3, G2M(CC5)) and density functional theory (DFT)-based (B3LYP, MPW1B95 and MPWB1K) techniques. The enthalpies of the C-N bond dissociation and isomerization of these nitroalkanes were also calculated. The calculated values of the formation and reaction enthalpies were compared with the experimental data when these data were available. It was found that only the G3 procedure gave accurate (within 1 kcal/mol) results for the formation enthalpy of nitroalkanes, their isomers, and radical products. The G3 procedure and two new hybrid meta DFT methods proposed by Truhlar's group (Zhao, Y.; Truhlar, D. J. Phys. Chem. A 2004, 108, 6908) showed good results for the reaction enthalpies of the nitromethane isomerization and the C-N bond dissociation. Our calculation results were used to analyze thermodynamics of the dissociation and isomerization reactions of the poly nitro-substituted methanes.     

Interpretation of Brønsted acidity by triadic paradigm: a G3 study of mineral acids

Deprotonation enthalpies and the gas-phase acidities of 24 inorganic acids are calculated by using composite G3 and G2 methodologies. The computed values are in very good accordance with available measured data. It is found that the experimental DeltaH(acid) values of the FSO(3)H and CF(3)SO(3)H are too high by some 6 and 7 kcal mol(-1), respectively. Furthermore, a new DeltaH(acid) value for HClO(4) of 300 kcal mol(-1) is recommended and suggested as a threshold of superacidicity in the gas phase. The calculated deprotonation enthalpies are interpreted by employing the trichotomy paradigm. Taking into account that the deprotonation enthalpy is a measure of acidity, it can be safely stated that the pronounced acidities of mineral acids are to a very large extent determined by Koopmans' term with very few exceptions, one of them being H(2)S. To put it in another way, acidities are predominantly a consequence of the ability of the conjugate bases to accommodate the excess electron charge, since Koopmans' term in trichotomy analysis is related to conjugate base anion. The final state is decisive in particular for superacids like ClSO(3)H, CF(3)SO(3)H, HClO(4), HBF(4), HPF(6), HAlCl(4), and HAlBr(4). However, in the latter two molecules the bond dissociation energy of the halogen-H bond substantially contributes to their high acidity too. Therefore, acidity of these two most powerful superacids studied here is determined by cooperative influence of both initial and final state effects. It should be emphasized that acidity of hydrogen halides HCl and HBr is a result of concerted action of all three terms included in triadic analysis. A byproduct of the triadic analysis are the first adiabatic ionization energies of the anionic conjugate bases. They are in fair to good agreement with the experimental data, which are unfortunately sparse. A fairly good qualitative correlation is found between the gas-phase deprotonation enthalpies of six mineral O-H acids and available Hammett-Taft sigma(p)- constants of the corresponding substituent groups.     

Effect of geminal substitution at silicon on 1-sila- and 1,3-disilacyclobutanes' strain energies, their 2+2 cycloreversion enthalpies, and Si=C pi-bond energies in silenes.

To evaluate the effect of geminal substitution at silicon on 1-sila- and 1,3-disilacyclobutanes' strain energies, their 2+2 cycloreversion enthalpies, and Si=C pi-bond energies in silenes, an ab initio MO study of silenes, R2Si=CH2 (1), 1-silacyclobutanes, cyclo-R2Si(CH2)3 (2), and 1,3-disilacyclobutanes, cyclo-(R2SiCH2)2 (3), was performed using the level of theory denoted MP4/TZ(d)//MP2/6-31G(d) (TZ means the 6-311G(d) basis set for elements of the second period and hydrogen, and the McLean-Chandler (12s,9p)/[6s,5p](d) basis set for the third period elements). In the series R = H, CH3, SiH3, CH3O, NH2, Cl, F, the growth of the reaction enthalpies and strain energies is proportional to the substituents' electronegativities. 2+2 cycloreversion of 2 is endothermic by 40.6-63.1 kcal/mol, whereas that of 3 is endothermic by 72.7-114.2 kcal/mol. On going from a silicon to a fluorine substituent at the sp2-hybridized silicon atom, the pi-bond energy in 1 weakens by 11.3 kcal/mol, and the Si=C bond length shortens by 0.053 A. The effect of substituents' electronegativities at the double-bonded silicon atom in silenes is formulated as follows: the higher electronegativity, the shorter and the weaker the Si=C pi-bond. The latter is rationalized in terms of more strained geometry resulting from the energetic cost for planarizing the R2SiC moiety. The enthalpies of the ring-opening reaction are 68.0-80.1 kcal/mol (a cleavage of the Si-C bond in 3), 65.0-76.4 kcal/mol (a cleavage of the Si-C bond in 2), and 58.0-64.9 kcal/mol (a cleavage of the C-C bond in 2). The pronounced difference in the enthalpies of 2+2 cycloreversion of 1-sila- and 1,3-disilacyclobutanes is mainly due to the difference in the enthalpies of diradicals' decomposition. The decomposition of diradicals resulting from a cleavage of C-C and Si-C bonds in 2 is exothermic by 24.3-3.3 kcal/mol (apart from the difluoro derivative which is endothermic by 5.1 kcal/mol) and 27.0-13.3 kcal/mol, respectively. The decomposition of a 1,4-diradical resulting from ring opening of 3, apart from the disilyl derivative, is the endothermic process for which the enthalpy varies from 10.6 to 40.4 kcal/mol.     

Gas-phase acidities of cysteine-polyglycine peptides: The effect of the cysteine position

The sequence and conformational effects on the gas-phase acidities of peptides have been studied by using two pairs of isomeric cysteine-polyglycine peptides, CysGly_3,4NH₂ and Gly_3,4CysNH₂. The extended Cooks kinetic method was employed to determine the gas-phase acidities using a triple quadrupole mass spectrometer with an electrospray ionization source. The ion activation was achieved via collision-induced dissociation experiments. The deprotonation enthalpies (Δ_acid H) were determined to be 323.9 ± 2.5 kcal/mol (CysGly₃NH₂), 319.2 ± 2.3 kcal/mol (CysGly₄NH₂), 333.8 ± 2.1 kcal/mol (Gly₃CysNH₂), and 321.9 ± 2.8 kcal/mol (Gly₄CysNH₂), respectively. The corresponding deprotonation entropies (Δ_acid S) of the peptides were estimated. The gas-phase acidities (Δ_acid G) were derived to be 318.4 ± 2.5 kcal/mol (CysGly₃NH₂), 314.9 ± 2.3 kcal/mol (CysGly₄NH₂), 327.5 ± 2.1 kcal/mol (Gly₃CysNH₂), and 317.4 ± 2.8 kcal/mol (Gly₄CysNH₂), respectively. Conformations and energetic information of the neutral and anionic peptides were calculated through simulated annealing (Tripos), geometry optimization (AM1), and single point energy calculations (B3LYP/6-31+G(d)), respectively. Both neutral and deprotonated peptides adopt many possible conformations of similar energies. All neutral peptides are mainly random coils. The two C-cysteine anionic peptides, Gly_3,4(Cys-H)⁻NH₂, are also random coils. The two N-cysteine anionic peptides, (Cys-H)⁻Gly_3,4NH₂, may exist in both random coils and stretched helices. The two N-cysteine peptides, CysGly₃NH₂ and CysGly₄NH₂, are significantly more acidic than the corresponding C-terminal cysteine ones, Gly₃CysNH₂ and Gly₄CysNH₂. The stronger acidities of the former may come from the greater stability of the thiolate anion resulting from the interaction with the helix-macrodipole, in addition to the hydrogen bonding interactions.     

C-H bond strengths and acidities in aromatic systems: effects of nitrogen incorporation in mono-, di-, and triazines

The negative ion chemistry of five azine molecules has been investigated using the combined experimental techniques of negative ion photoelectron spectroscopy to obtain electron affinities (EA) and tandem flowing afterglow-selected ion tube (FA-SIFT) mass spectrometry to obtain deprotonation enthalpies (Δ(acid)H(298)). The measured Δ(acid)H(298) for the most acidic site of each azine species is combined with the EA of the corresponding radical in a thermochemical cycle to determine the corresponding C-H bond dissociation energy (BDE). The site-specific C-H BDE values of pyridine, 1,2-diazine, 1,3-diazine, 1,4-diazine, and 1,3,5-triazine are 110.4 ± 2.0, 111.3 ± 0.7, 113.4 ± 0.7, 107.5 ± 0.4, and 107.8 ± 0.7 kcal mol(-1), respectively. The application of complementary experimental methods, along with quantum chemical calculations, to a series of nitrogen-substituted azines sheds light on the influence of nitrogen atom substitution on the strength of C-H bonds in six-membered rings.     

Polar group enhanced gas-phase acidities of carboxylic acids: an investigation of intramolecular electrostatic interaction

We studied the effects of polar groups on the gas-phase acidities of carboxylic acids experimentally and computationally. In this connection, the gas-phase acidities (DeltaH(acid), the enthalpy of deprotonation, and DeltaG(acid), the deprotonation free energy) of borane-complexed methylaminoacetic acid ((CH(3))2N(BH(3))CH(2)CO(2)H) and methylthioacetic acid (CH(3)S(BH(3))CH(2)CO(2)H) were measured using the kinetic method in a flowing afterglow-triple quadrupole mass spectrometer. The values of DeltaH(acid) and DeltaG(acid) of (CH(3))2N(BH(3))CH(2)CO(2)H were determined to be 328.8 +/- 1.9 and 322.1 +/- 1.9 kcal/mol, and those of CH(3)S(BH(3))CH(2)CO(2)H were determined to be 325.8 +/- 1.9 and 319.2 +/- 1.9 kcal/mol, respectively. The theoretical enthalpies of deprotonation of (CH(3))2N(BH(3))CH(2)CO(2)H (329.2 kcal/mol) and CH(3)S(BH(3))CH(2)CO(2)H (325.5 kcal/mol) were calculated at the B3LYP/6-31+G(d) level of theory. The calculated enthalpies of deprotonation of N-oxide-acetic acid (CH(3)NOCH(2)CO(2)H, 329.4 kcal/mol) and S-oxide-acetic acid (CH(3)SOCH(2)CO(2)H, 328.6 kcal/mol) are comparable to the experimental results for borane-complexed methylamino- and methylthioacetic acids. The enthalpy of deprotonation of sulfone-acetic acid (CH(3)SO2CH(2)CO(2)H, 326.1 kcal/mol) is about 2 kcal/mol lower than the S-oxide-acetic acid. The calculated enthalpy of deprotonation of sulfoniumacetic acid, (CH(3))2S+CH(2)CO(2)H, is 243.0 kcal/mol. Compared to the corresponding reference molecules, CH(3)NHCH(2)CO(2)H and CH(3)SCH(2)CO(2)H, the dipolar group and the monopolar group substituted carboxylic acids are stronger acids by 11-14 and 97 kcal/mol, respectively. We correlated the changes of the acidity upon a polar group substitution to the electrostatic free energy within the carboxylate anion. The acidity enhancements in polar group substituted carboxylic acids are the results of the favorable electrostatic interactions between the polar group and the developing charge at the carboxyl group.     

Theoretical predictions of the structure, gas-phase acidity and aromaticity of 1,2-diseleno-3,4-dithiosquaric acid

Results of ab initio self-consistent-field (SCF) and density functional theory (DFT) calculations of the gas-phase structure, acidity (free energy of deprotonation, ΔG^o), and aromaticity of 1,2-diseleno-3,4-dithiosquaric acid (3,4-dithiohydroxy-3-cyclobutene-1,2-diselenone, H₂C₄Se₂S₂) are reported. The global minimum found on the potential energy surface of 1,2-diseleno-3,4-dithiosquaric acid presents a planar conformation. The ZZ isomer was found to have the lowest energy among the three planar conformers and the ZZ and ZE isomers are very close in energy. The optimized geometric parameters exhibit a bond length equalization relative to reference compounds, cyclobutanediselenone, and cyclobutenedithiol. The computed aromatic stabilization energy (ASE) by homodesmotic reaction (Eq 1) is −20.1 kcal/mol (MP2(fu)/6-311+G** //RHF/6-311+G**) and −14.9 kcal/mol (B3LYP//6-311+G**//B3LYP/6-311+G**). The aromaticity of 1,2-diseleno-3,4-dithiosquaric acid is indicated by the calculated diamagnetic susceptibility exaltation (Λ) −17.91 (CSGT(IGAIM)-RHF/6-311+G**//RHF/6-311+G**) and −31.01 (CSGT(IGAIM)-B3LYP/6-311+G**//B3LYP/6-311+G**). Thus, 1,2-diseleno-3,4-dithiosquaric acid fulfils the geometric, energetic and magnetic criteria of aromaticity. The calculated theoretical gas-phase acidity is ΔG^o _1(298K)=302.7 kcal/mol and ΔG^o _2(298K)=388.4 kcal/mol. Hence, 1,2-diseleno-3,4-dithiosquaric acid is a stronger acid than squaric acid(3,4-dihydroxy-3-cyclobutene-1,2-dione, H₂C₄O₄). Received: 11 April 2000 / Accepted: 7 July 2000 / Published online: 27 September 2000     

Electronic states of thiophenyl and furanyl radicals and dissociation energy of thiophene via photoelectron imaging of negative ions

We report photoelectron images and spectra of deprotonated thiophene, C(4)H(3)S(-), obtained at 266, 355, and 390 nm. Photodetachment of the α isomer of the anion is observed, and the photoelectron bands are assigned to the ground X(2)A(') (σ) and excited A(2)A(") and B(2)A(") (π) states of the thiophenyl radical. The photoelectron angular distributions are consistent with photodetachment from the respective in-plane (σ) and out-of-plane (π(?)) orbitals. The adiabatic electron affinity of α-(●)C(4)H(3)S is determined to be 2.05 ± 0.08 eV, while the B(2)A(") term energy is estimated at 1.6 ± 0.1 eV. Using the measured electron affinity and the electron affinity/acidity thermodynamic cycle, the C-H(α) bond dissociation energy of thiophene is calculated as DH(298)(H(α)-C(4)H(3)S) = 115 ± 3 kcal/mol. Comparison of this value to other, previously reported C-H bond dissociation energies, in particular for benzene and furan, sheds light of the relative thermodynamic stabilities of the corresponding radicals. In addition, the 266 nm photoelectron image and spectrum of the furanide anion, C(4)H(3)O(-), reveal a previously unobserved vibrationally resolved band, assigned to the B(2)A(") excited state of the furanyl radical, (●)C(4)H(3)O. The observed band origin corresponds to a 2.53 ± 0.01 eV B(2)A(") term energy, while the resolved vibrational progression (853 ± 42 cm(-1)) is assigned to an in-plane ring mode of α-(●)C(4)H(3)O (B(2)A(")).     

Why does perfluorination render bicyclo[2.2.0]hex-1(4)-ene stable toward dimerization? Calculations provide the answers

B3LYP calculations with two different basis sets have been performed to understand why bicyclo[2.2.0]hex-1(4)-ene (1a) undergoes dimerization with DeltaH(++) = 11.5 kcal/mol, but dimerization of perfluorobicyclo[2.2.0]hex-1(4)-ene (1b) has never been observed. The former reaction is computed to be exothermic by 37.2 kcal/mol, whereas the latter is calculated to be endothermic by 7.4 kcal/mol. The 44.6 kcal/mol difference between the enthalpies of these two reactions can be dissected into contributions of 24.5 kcal/mol for the difference between the enthalpies for forming diradical intermediates 2a and 2b and 20.1 kcal/mol for cyclization of 2a and 2b to, respectively, 3a and 3b. The latter enthalpy difference is largely attributable to repulsions between the endo-fluorines in the dimer, although the exo-fluorines also are found to contribute. The former enthalpy difference is attributable to the difference between the dissociation enthalpies of the pi bonds in 1a and 1b, which is shown to amount to 16 +/- 1 kcal/mol. About 25% of the stronger pi bond in fluoroalkene 1b is found to be due to hyperconjugation of the eight C-F bonds in 1b with the filled pi orbital. However, the major contributor to the stronger pi bond in 1b is shown to be the unfavorable interaction that results when a pyramidalized radical center is syn to a C-F bond. Both of these effects, which contribute to the greater strength of the pi bond in 1b, relative to that in 1a, are analyzed and discussed.     

Composition and thermochemistry of silver bromide vapor

The mole fractions of AgBr and Ag3Br3 in the saturated vapor at 840 K have been evaluated from the vapor mass spectrum, by comparison with the corresponding spectrum of AgCl vapor, where the monomer/trimer ratio is known accurately from vapor molecular weight measurements. Combination of these results with new measurements of the vapor pressure of molten AgBr by the torsion-effusion method in the range 805-936 K yielded the third law enthalpies of vaporization and the standard enthalpies of formation DeltafH degrees 298(AgBr, g) = 27.8 +/- 0.3 kcal mol(-1) and DeltafH degrees 298(Ag3Br3, g) = -19.0 +/- 1 kcal mol(-1). The dissociation energy, D degrees 0(AgBr), is found to be 66.4 +/- 0.3 kcal mol(-1), or 2.88 +/- 0.01 eV, some 3.5-5 kcal mol(-1) lower than previous literature values. Approximate thermochemical stabilities of the dimer species Ag2Cl2 and Ag2Br2 have also been evaluated.     

Synthesis and characterization of ruthenium bis(beta-diketonato) pyridine-imidazole complexes for hydrogen atom transfer

Ruthenium bis(beta-diketonato) complexes have been prepared at both the RuII and RuIII oxidation levels and with protonated and deprotonated pyridine-imidazole ligands. RuII(acac)2(py-imH) (1), [RuIII(acac)2(py-imH)]OTf (2), RuIII(acac)2(py-im) (3), RuII(hfac)2(py-imH) (4), and [DBU-H][RuII(hfac)2(py-im)] (5) have been fully characterized, including X-ray crystal structures (acac = 2,4-pentanedionato, hfac = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionato, py-imH = 2-(2'-pyridyl)imidazole, DBU = 1,8-diazabicyclo[5.4.0]undec-7-ene). For the acac-imidazole complexes 1 and 2, cyclic voltammetry in MeCN shows the RuIII/II reduction potential (E1/2) to be -0.64 V versus Cp2Fe+/0. E1/2 for the deprotonated imidazolate complex 3 (-1.00 V) is 0.36 V more negative. The RuII bis-hfac analogues 4 and 5 show the same DeltaE1/2 = 0.36 V but are 0.93 V harder to oxidize than the acac derivatives (0.29 and -0.07 V). The difference in acidity between the acac and hfac derivatives is much smaller, with pKa values of 22.1 and 19.3 in MeCN for 1 and 4, respectively. From the E1/2 and pKa values, the bond dissociation free energies (BDFEs) of the N-H bonds in 1 and 4 are calculated to be 62.0 and 79.6 kcal mol(-1) in MeCN - a remarkable difference of 17.6 kcal mol(-1) for such structurally similar compounds. Consistent with these values, there is a facile net hydrogen atom transfer from 1 to TEMPO* (2,2,6,6-tetramethylpiperidine-1-oxyl radical) to give 3 and TEMPO-H. The DeltaG degrees for this reaction is -4.5 kcal mol(-1). 4 is not oxidized by TEMPO* (DeltaG degrees = +13.1 kcal mol(-1)), but in the reverse direction TEMPO-H readily reduces in situ generated RuIII(hfac)2(py-im) (6). A RuII-imidazoline analogue of 1, RuII(acac)2(py-imnH) (7), reacts with 3 equiv of TEMPO* to give the imidazolate 3 and TEMPO-H, with dehydrogenation of the imidazoline ring.     

Heats of formation of [2.2]paracyclophane-1-ene and [2.2]paracyclophane-1,9-diene - an experimental study

The enthalpies of formation [Delta(g)] of tricyclo[8.2.2.2(4,7)]hexadeca-1(13),2,4(16),5,7(15),10(14),11-heptaene (2, 1,2-dehydro[2.2]paracyclophane or [2.2]paracyclophane-1-ene) and tricyclo[8.2.2.2(4,7)]hexadeca-1(13),2,4(16),5,7(15),8,10(14),11-octaene (3, 1,2,9,10-dehydro[2.2]paracyclophane or [2.2]paracyclophane-1,9-diene) have been determined by measuring their heats of combustion in a microcalorimeter and their heats of sublimation by the transpiration method. Values of the strain energies (SE) [SE(2) = 34.7 kcal mol(-)(1), SE(3) = 42.0 kcal mol(-)(1)] have been derived from the gas-phase heats of formation and are compared with those from MM3 and PM3 calculations and with the corresponding value SE(1) = 30.1 kcal mol(-)(1) for the parent tricyclo[8.2.2.2(4,7)]hexadeca-1(13),4(16),5,7(15),10(14),11-hexaene (1, [2.2]paracyclophane). The higher strain energies of 2 and 3 (by 4.6 and 11.9 kcal mol(-)(1)) are in accord with the well-known increased reactivities of their aromatic rings as a consequence of their increased bending. As revealed by an X-ray crystal structure analysis, the bending in the monoene 2 corresponds to that of 1 and 3 at one of two bridging corners.     

Isolation, characterization of an intermediate in an oxygen atom-transfer reaction, and the determination of the bond dissociation energy

The synthesis and structure of a phosphine oxide-bound intermediate molecule originating from a dioxo-molybdenum(VI) complex is described. The loss of phosphine oxide has been followed by surface-induced dissociation mass spectrometry that gave the bond dissociation energy of 29.5 (+/- 3.5) kcal/mol. Considering the bond dissociation energy for a Mo=O bond to be 100 kcal/mol, this value suggests that the primary driving force for the reaction is the formation of the intermediate complex.