Comparative analysis of radical scavenging and antioxidant activity of phenolic compounds present in everyday use spice plants by means of spectrophotometric and chromatographic methods

Comparative analysis of radical scavenging and antioxidant activities of phenolic compounds present in everyday use spice plants was carried out by means of spectrophotometric and chromatographic methods. Six spice plant samples, namely onion (Allium cepa), parsley (Petroselinum crispum) roots and leaves, celery (Apium graveolens) roots and leaves and leaves of dill (Anethum graveolens) were analyzed. Total amount of phenolic compounds and radical scavenging activity (RSA) was the highest in celery leaves and dill extracts and was the lowest in celery roots. Comparing commonly used spectrophotometric analysis of 2,2-diphenyl-1-picrylhydrazyl (DPPH) RSA of extracts with the results obtained using reversed-phase chromatographic separation with on-line post-column radical scavenging reaction detection, good correlation was obtained (R(2)=0.848). Studies using HPLC system with electrochemical detector showed that bioactive phytochemicals can be separated and antioxidant activities of individual compounds evaluated without the need of a complex HPLC system with reaction detector. The results obtained using electrochemical detection correlate with the RSA assayed using spectrophotometric method (R(2)=0.893).     

Quantification of morphine and its major metabolites M3G and M6G in antemortem and postmortem samples

Morphine is one of the most effective agents for the control of significant pain, primarily metabolized to morphine‐3‐glucuronide (M3G) and morphine‐6‐glucuronide (M6G). While M6G is a potent opioid agonist, M3G has no opioid action and seems to have a role in side‐effects caused by morphine. In this study, a reversed‐phase high‐performance liquid chromatographic method with diode‐array and electrochemical detection was developed for the simultaneous determination of morphine, M3G and M6G in antemortem and postmortem samples (plasma, whole blood, urine, liver, kidney and brain). Morphine, glucuronides and internal standard were extracted by double solid‐phase extraction and the separation was carried out with a Waters Spherisorb® ODS2 reversed‐phase column and potassium phosphate buffer (pH = 2.2)–acetonitrile containing sodium dodecyl sulfate as the mobile phase. The method proved to be specific with good linearity for all analytes in a calibration range from 1 to 600 ng/mL and proved to be accurate and have adequate precision and recovery. Limits of detection in the studied matrices were 0.4–4.5 ng/mL for morphine, 2.7–6.1 ng/mL for M3G and 0.8–4.4 ng/mL for M6G. The proposed method can be successfully applied to quantify morphine and its metabolites in several biological samples, covering the major routes of distribution, metabolism and elimination of morphine. Copyright © 2014 John Wiley & Sons, Ltd.     

Analysis of haloacetic acid mixtures by HPLC using an electrochemical detector coated with a surfactant-nafion film

High pressure liquid chromatography (HPLC) using an electrochemical (EC) detector electrode of pyrolytic graphite coated with a film of ionomer Nafion and the water-insoluble surfactant didodecyldimethylammonium bromide (DDAB) was used to achieve separation and detection of all six bromo- and chloro-acetic acids. The Nafion-DDAB film preconcentrates the acid anions facilitating their electrochemical detection by direct reduction at -1.2 V versus SCE. Detection limits were poorer than the EPA-approved GC-ECD method, but HPLC-EC avoids the derivatization necessary for GC. The HPLC-EC method also detected tribromoacetic acid, which has not been determined simultaneously with other halogenated acids by reported chromatographic methods. The HPLC-EC method using a Nafion-DDAB-coated detector electrode gave comparable results to GC-ECD for the determination of TCA in drinking water.     

Fabrication of a gold microelectrode for amperometric detection on a polycarbonate electrophoresis chip by photodirected electroless plating

A novel method of photoresist-free micropatterning coupled with electroless gold plating is described for the fabrication of an integrated gold electrode for electrochemical detection (ED) on a polycarbonate (PC) electrophoresis microchip. The microelectrode layout was photochemically patterned onto the surface of a PC plate by selective exposure of the surface coated without photoresist to 254 nm UV light through a chromium/quartz photomask. Thus, the PC plate was selectively sensitized by formation of reactive chemical moieties in the exposed areas. After a series of wet chemistry reactions, the UV-exposed area was activated with a layer of gold nanoparticles that served as a seed to catalyze the electroless plating. The gold microelectrode was then selectively plated onto the activated area by using an electroless gold plating bath. Nonselective gold deposition on the unwanted areas was eliminated by sonication of the activated PC plate in a KSCN solution before electroless plating, and the adhesion of the plated electrodes to the PC surface was strengthened with thermal annealing. Compared with the previously reported electroless plating technique for fabrication of microelectrodes on a microchip, the present method avoided the use of a membrane stencil with an electrode pattern to restrict the area to be wet-chemically sensitized. The CE with integrated ED (CE-ED) microchip was assembled by thermal bonding an electrode-plated PC cover plate to a microchannel-embossed PC substrate. The novel method allows one to fabricate low-cost, electrode-integrated, complete PC CE-ED chips with no need of a clean room. The fabricated CE-ED microchip was demonstrated for separation and detection of model analytes, including dopamine (DA) and catechol (CA). Detection limits of 0.65 and 1.03 microM were achieved for DA and CA, respectively, and theoretical plate number of 1.4 x 10(4) was obtained for DA. The plated gold electrode can be used for about 4 h, bearing usually more than 100 runs before complete failure.     

Analysis of enkephalins, beta-endorphins and small peptides in their sequences by highly sensitive high-performance liquid chromatography with electrochemical detection: implications in opioid peptide metabolism

Sensitivity in the 10-100 pg range for enkephalins, beta-endorphin, tyrosine (T), 12 tyrosylglycine (T-G) and tyrosylglycylglycine (T-G-G) was attained by using a high-performance liquid chromatographic (HPLC) method with electrochemical detection which is at least 100 times more sensitive than HPLC with UV detection. The chromatographic conditions on a reversed-phase C18 silica column were 50 mM sodium phosphate buffer (pH 2.1) (A) in acetonitrile-methanol (1:1) (B), isocratic mixture, flow-rate 0.6-1 ml/min, UV detection at 205 nm, electrochemical oxidation potential + 1.25 V. The separation of T, T-G and T-G-G was obtained by using 10% B while the separation of the pentapeptide, enkephalins required 40% B. Separation of enkephalins from beta-endorphin was attained at a shorter retention times did not exceed 15 min. This method can be used to determine tissue levels and pharmacodynamics of enkephalins and beta-endorphin. A highly specific measurement of the different enzymes involved in the metabolism of enkephalin has been achieved.     

Estimation of tetrahydro, dihydro and fully oxidised pterins by high-performance liquid chromatography using sequential electrochemical and fluorometric detection

A method is described for the separation and detection of tetrahydro, dihydro and fully oxidised pterins in a single chromatographic run using ion-pair reversed-phase high-performance liquid chromatography. Tetrahydropterins are detected by electrochemical oxidation, dihydropterins by fluorescence following post-column electrochemical oxidation and the fully oxidised pterins by their natural fluorescence. The post-column electrochemical conversion of the non-fluorescent dihydropterins to fluorescent compounds is proportional to the amount injected over three orders of magnitude. Because of the relative selectivity of the fluorescence detection and the low potential required to oxidise the tetrahydropterins, all the oxidation species of the pterins may be measured in biological samples with minimal sample clean-up.     

气相色谱–质谱法测定塑胶中8种苯并三唑紫外吸收剂

以气相色谱–质谱联用法测定塑胶中8种苯并三唑紫外吸收剂的含量。采用甲苯作为萃取溶剂,对样品进行超声萃取,选用DB–5HT气相分离色谱柱,以气相色谱–质谱联用仪对塑胶制品中8种苯并三唑类紫外吸收剂(UV–P,UV–320,UV–326,UV–327,UV–328,UV–329,UV–234,UV–360)进行分析测试。在优化的前处理和仪器分析条件下,8种苯并三唑紫外吸收剂萃取效果良好,在17 min内有效分离,色谱峰理想。在0.1~10 mg/L范围内溶液的质量浓度与色谱峰面积线性良好,线性相关系数(r~2)均大于0.999,检出限为0.1 mg/L,重复性试验相对标准偏差小于3%(n=7),加标回收率为95%~110%。该方法简便快捷、准确可靠,满足苯并三唑紫外吸收剂的检测要求。     

Electrodeposition of composite Ni–B coatings in a stirred heterogeneous system

The formation of composite electrochemical coatings of a nickel matrix with boron microparticles was investigated. Electrolytical nickel–boron layers were deposited on a paraffin-impregnated graphite electrode in a stirred heterogeneous system formed by a Watts-type nickel plating bath and dispersed boron powder particles. The polarisation behaviour of the composite plating bath as a function of the boron particle loading was examined. The effect of deposition conditions, as well as of the amount of boron powder in the plating bath on the boron content in the composite Ni–B coatings, was examined. The composite coating structure was established using scanning electron microscopy and light optical microscopy. The distribution of boron particles in the composite deposits was investigated by dynamic secondary ion mass spectrometry. The boron particles content was determined gravimetrically. The obtained results suggest that the content of incorporated boron particles increases with an increasing amount of boron in the plating bath. The potentiodynamic deposition method is demonstrated to be more suitable for production of composite coatings with a high content of boron particles than the potentiostatic one. Homogeneous distribution of boron particles in the nickel matrix without coagulation or sedimentation was associated with the electrochemical fabrication method in stirred heterogeneous systems.     

Determination of paralytic shellfish poisoning toxins by high-performance ion-exchange chromatography

An efficient LC method has been developed for the determination of paralytic shellfish poisoning (PSP) toxins based on ion-exchange chromatographic separation of the toxins followed by electrochemical post-column oxidation and fluorescence detection as well as mass spectrometric (MS) detection. The method can be applied to the determination of PSP toxins in phytoplankton and to control seafood for PSP content.     

分子印迹电化学传感器敏感膜体系的构建及其研究进展

分子印迹技术具有构效预定性、特异识别性和广泛应用性的特点,在色谱分离、固相萃取、仿生传感器、模拟酶催化和膜分离等方面得到了广泛应用。近年来,分子印迹电化学传感器(MIECS)的研究日益受到人们的重视。在MIECS设计过程中,分子印迹敏感膜体系的构建非常关键,它直接影响着传感器的性能。该文简要介绍了MIECS的分类及其检测原理,对传统体系、自组装体系、分子印迹聚合物粒子镶嵌体系、电聚合体系和溶胶-凝胶体系等5种MIECS敏感膜体系的构建方法、特点及其研究进展进行综述,并展望了MIECS的发展方向。     

Isocratic ion chromatographic determination of underivatized amino acids by electrochemical detection

An isocratic chromatographic separation with amperometric detection of underivatized amino acids at a copper oxyhydroxide modified glassy carbon electrode is described. A simple and sensitive quantitation procedure of amino acids without the need of tedious and time-consuming derivatization step was achieved by coupling anion-exchange chromatography with electrochemical detection. The effects of hydroxide, nitrate and acetonitrile concentration in the mobile phase on the capacity factors and peak resolution was evaluated. Under the optimized isocratic chromatographic conditions (i.e. 60 mM NaOH) and under constant applied potentials (i.e. 0.55 V versus Ag/AgCl) the detection limit ranged between 4 and 24 pmol injected and the linear dynamic range spanned generally over three or four order of magnitude for all investigated amino acid compounds. Direct determination of several common free amino acids in beer and milk samples were performed.     

乙二胺在化学沉积Ni-B合金中的机理

研究乙二胺稳定剂对化学镀N i-B合金沉积速率和镀液稳定性的影响.实验表明,少量乙二胺可改善镀液的稳定性.镀液的电化学测试发现,乙二胺对体系的阳极过程和阴极过程均有影响,还原剂的氧化电流和合金的还原电流均随乙二胺加入量的增加而减少.红外光谱显示乙二胺附在镍基体表面发生化学吸附,从而抑制了还原剂的氧化,降低N i-B化学沉积速率(稳定了镀液).     

Ni-P-TiO2化学复合镀层电极的乙醇电催化氧化

于Ni-P镀液添加TiO2颗粒,用化学镀法在黄铜基底上制备不同TiO2含量的Ni-P-TiO2复合镀层电极.采用循环伏安法、线性扫描法、计时电流和交流阻抗法测定Ni-P-TiO2/Cu电极的电化学性能.结果表明:常温下Ni-P-TiO2/Cu电极在碱性溶液中对乙醇氧化有很高的电催化活性;Ni-P-TiO2电极上乙醇的电催化氧化活性随镀层TiO2量的不同而异;镀液中TiO2含量为5 g.L-1时,所得电极的电催化乙醇氧化的活性最佳.     

Pencil‐Drawn Dual Electrode Detectors to Discriminate Between Analytes Comigrating on Paper‐Based Fluidic Devices but Undergoing Electrochemical Processes with Different Reversibility

A simple method is described to discriminate between analytes comigrating under on‐plate separation conditions, whose electrochemical behavior displays different reversible characters. It is based on the use of dual electrode detectors pencil‐drawn at the end of paper‐based fluidic channels defined by hydrophobic barriers. Simultaneous detection of comigrating species is achieved by applying to the upstream pencil‐drawn working electrode a potential for the oxidation (or reduction) of both analytes, while to the downstream pencil‐drawn working electrode a potential is imposed for the reverse process involving the product of the sole analyte undergoing a reversible enough electrochemical process. The performance of these inexpensive devices was preliminarily optimized by adopting hexacyanoferrate(II) as prototype species undergoing a reversible anodic process at carbon electrodes. They were then used as dual electrode detectors for thin‐layer chromatographic runs conducted on paper‐based microfluidic devices. Two types of synthetic solutions, one containing different contents of dopamine (DA) and ascorbic acid (AA) and the other of paracetamol (PA) and AA, were chosen as model samples. This choice was prompted us by the fact that in both cases these analytes comigrated under the adopted experimental conditions and required similar enough oxidation potentials. Nevertheless, DA and PA underwent reversible enough anodic processes while an irreversible electrochemical reaction is involved in the AA oxidation. Satisfactory results were found for both couples of target analytes, whose simultaneous detection was achieved within 230 s and was characterized by good enough repeatability and sensitivity. In particular, this approach appears to be well suited for the rapid and inexpensive assembling of electrochemical detectors for flow analysis systems.     

Routine determination of urinary free catecholamines by high-performance liquid chromatography with electrochemical detection

A simple and reliable high-performance liquid chromatographic method is described for the routine determination of the free catecholamines (norepinephrine, epinephrine and dopamine) in urine. The catecholamines are isolated from urine samples using small affinity chromatography columns prepacked with immobilised m-aminophenylboronic acid, separated by ion-pair reversed-phase liquid chromatography and quantified by electrochemical detection. Total analysis, including sample preparation time, is achieved in less than 30 min with analytical recoveries of 92-96% for all three catecholamines. Long-term stability and reproducibility of the liquid chromatographic system is attained by selection of optimised conditions for chromatographic separation with a formate mobile phase and produces detection limits of 1.4, 1.8 and 2.2 nmol/l for norepinephrine, epinephrine and dopamine, respectively, in urine samples and day-to-day coefficients of variation of less than 6%. Furthermore, the affinity isolation gels can be reused a minimum of ten times providing a rapid and cost-effective means of sample preparation.     

Liquid chromatographic retention behavior and separation of chlorophenols on a beta-cyclodextrin bonded-phase column, Part II. Monoaromatic chlorophenols: separation

The liquid chromatographic separation of 19 monoaromatic chlorophenols on a beta-cyclodextrin bonded-phase column is investigated in both an isocratic and a gradient elution mode. Even though the isocratic mode can be employed for the separation of the member components of each category of chlorophenols (e.g., mono-, di-, etc.), significant overlaps between the retention times of the various categories prevent the separation of all chlorophenols on a single chromatogram. Gradient elution can be used, however, for the separation of 15 of the 19 chlorophenol isomers. The unique features of gradient elution as applied to beta-cyclodextrin bonded-phase columns are discussed. The detection of chlorophenols with UV and electrochemical methods is also discussed and the two are compared.     

电沉积Ni/LaNiO3复合电极及其在碱性介质中的析氧性能

采用溶胶-凝胶法制备了钙钛矿型复合氧化物LaNiO3,然后将其加入瓦特镀镍液中进行复合电沉积,研究了镀液pH值和阴极电流密度对Ni/LaNiO3复合镀层组成的影响。运用扫描电镜(SEM)、能谱分析(EDS)和X射线衍射(XRD)等对复合镀层进行表征,结果表明:最佳电沉积工艺条件是镀液pH=5.8和阴极电流密度jk=90 mA.cm-2,所得的Ni/LaNiO3复合镀层中LaNiO3的质量含量约为60%。用循环伏安、稳态极化、恒电位阶跃、电化学阻抗谱等电化学技术评价了Ni/LaNiO3复合电极的析氧性能。结果表明:在5 mol.L-1的KOH溶液中,Ni/LaNiO3复合电极的起始析氧电位较镍电极负,表观活化自由能比镍电极降低约2/3,比表面积约为镍电极的55倍,析氧电催化性能得到大幅度提高。     

Determination of caudatin-2,6-dideoxy-3-O-methy-beta-d-cymaropyranoside in rat plasma using liquid chromatography-tandem mass spectrometry

A selective, sensitive and rapid liquid chromatography-tandem mass spectrometry method has been developed for the determination of caudatin-2,6-dideoxy-3-O-methy-beta-d-cymaropyranoside (CDMC) in rat plasma. This method involves a plasma clean-up step using liquid-liquid extraction, followed by LC separation and positive electrospray ionization mass spectrometry detection (LC/ESI-MS/MS). Chromatographic separation of the analytes was achieved using a C(18) column with a mobile phase of acetonitrile and water (70:30, v/v) at a flow rate of 1.0 mL/min. Low energy collision tandem mass spectrometric analysis (CID-MS/MS) using the multiple reaction monitoring (MRM) mode was used for analyte quantification. For the MRM analysis of CDMC, the following transition at m/z 658.4 --> 529.6 derived from the protonated molecule [M + Na](+). A calibration curve was linear in the 5-500 ng/mL range for CDMC, and the limit of detection was 5 ng/mL. The inter- and intra-day precisions (RSD) were 相似文献   

Comparison of Bottom-up Filling in Electroless Plating with an Addition of PEG,PPG and EPE

The bottom‐up filling capabilities of electroless copper plating bath with an addition of additives, such as polyethylene glycol (PEG), polypropylene glycol (PPG) and triblock copolymers of PEG and PPG with ethylene oxide terminal blocks termed EPE, were investigated by the cross‐sectional scanning electron microscopy (SEM) observation of sub‐micrometer trenches. Though three additives had inhibition for electroless copper deposition, the suppression degrees of three additives were different. EPE‐2000 had the strongest suppression for electroless copper deposition, and the suppression of PEG‐2000 was the weakest. The bottom‐up filling capability of electroless copper was investigated in a plating bath containing different additives with the concentration of 2.0 mg/L. The cross‐sectional SEM observation indicated the trenches with the width of 280 nm and the depth of 475 nm were all completely filled by the plating bath with an addition of EPE‐2000, but the trenches were not completely filled by the plating bath with an addition of PEG‐2000 or PPG‐2000, and some voids appeared. Linear sweep voltammetry measurement indicated that three additives all inhibited the cathodic reduction reaction and the anodic oxidation reaction, and the inhibition of EPE‐2000 was the strongest among three additives, which agreed with that of the deposition rate of electroless copper. Significant differences in surface roughness of deposited copper film were observed by UV‐visible near‐infrared for different suppressors, and the bright and smooth of deposited copper film were in accordance with the inhibition of three additives.     

Determination of trace amounts of chloramines by liquid chromatographic separation and amperometric detection

The detection of chloramines by monitoring electrochemical reduction processes on a glassy carbon electrode was investigated. Liquid chromatographic separation using a C₁₈ column followed by amperometric or spectrophotometric detection were compared. The results indicate that amperometric detection is the more sensitive, especially for dichloramine.