碱性介质中BIT,BIOHT和BIMMT对铜的缓蚀性能和吸附行为

采用失重法和电化学方法研究了BIT, BIOHT和BIMMT三种席夫碱基四唑类化合物对铜在质量分数为5%的NaHCO3水溶液中的缓蚀性能和吸附行为. 结果表明, 在NaHCO3水溶液中三种化合物对铜均有较好的缓蚀作用, 三种化合物的缓蚀性能大小顺序为BIMMT>BIOHT>BIT. 三种化合物在铜表面上的吸附过程为放热过程, 其在铜表面上的吸附行为服从Langmuir吸附等温式, 属于物理吸附.     

碱性介质中两种Mannich碱对H62黄铜的缓蚀性能和吸附行为

本文采用"一锅法"合成了两种Mannich碱1-(3-氧代丁基)硫脲(OBT)和1-(3-氧代-3-苯丙基)硫脲(OPPT),并采用失重法和电化学研究方法研究了两种Mannich碱对H62黄铜在5%(w)NaHCO3水溶液中的缓蚀性能和吸附行为。结果表明:在5%NaHCO3水溶液中这两种化合物对H62黄铜均有较好的缓蚀效果,缓蚀效率大小顺序为OPPTOBT。并且OBT与OPPT均为阴极型缓蚀剂。两种化合物在铜表面上的吸附过程为放热过程,其在铜表面上的吸附行为服从Langmiur吸附等温式,属于物理吸附。     

一种新的双吡唑啉酮化合物的合成及晶体结构

4-酰基吡唑啉酮是一类含有氮杂环的β-二酮型螯合剂,近几十年来,国内外对该类化合物及其衍生物进行了广泛的研究[1-3].本室验室曾合成了一系列4-苯甲酰基吡唑啉酮缩氨基硫脲及其衍生物,发现这类含硫席夫碱具有光致变色性,并对其变色机理和反应动力学进行了详细研究[4,5].作为工作的继续,我们又合成了1-苯基-3-甲基-4-乙酰基-5-吡唑啉酮缩硫甲基氨基硫脲(PMEP-MTTSC),虽然此化合物不具有光致变色性,但在培养其单晶的过程中,却意外地得到了一种双吡唑啉酮化合物.当用不同的溶剂来培养其单晶时,又得到了这种双吡唑啉酮的一对互变色异构体.反应过程如下:     

2种癸二酸咪唑啉季铵盐的合成及缓蚀性能评价

合成了2种癸二酸咪唑啉季铵盐癸二酸-水杨酸咪唑啉季铵盐(SSAI)和癸二酸咪唑啉季铵盐(SAI),并采用失重法和电化学方法研究了这2种咪唑啉季铵盐对N80钢在1 mol/L HCl溶液中的缓蚀性能和吸附行为。 结果表明,在1 mol/L HCl溶液中这2种化合物对N80钢均有较好的缓蚀作用,缓蚀效率大小顺序为SSAI＞SAI。 SSAI和SAI均为混合偏阳极型缓蚀剂。 2种化合物在N80钢表面的吸附服从Langmuir吸附等温式,属于化学吸附。     

芳酸偶氮吡唑啉酮及其麻黄碱盐的合成

近期报道了吡唑啉酮衍生物与稀土金属的络合作用。关于4-芳基偶氮吡唑啉酮与过渡金属络合的作用已有报道,但与稀土金属络合的文献不多。根据英国药典,麻黄碱与铜离子络合呈色而作为其鉴定方法,本文制备了麻黄碱类与芳酸偶氮吡唑啉酮形成的盐,以备研究它们的络合作用。在合成的5种吡唑啉酮衍生物中,本文利用PH     

含吡唑啉酮氨基脲类化合物的合成及结构

以1-苯基-3-甲基-吡唑啉酮-5 (PMP)和1,3-二苯基-吡唑啉酮-5 (DPP)为原料合成了六种4-酰基吡唑啉酮,并分别与氨基脲缩合,得到六个新的含吡唑啉酮环的缩氨基脲类化合物.用IR, ¹H NMR和¹³C NMR对各化合物进行了表征及结构确证,并用X射线单晶衍射法测定了化合物1c [1-苯基-3-甲基-4-丙酰基-吡唑啉酮-5缩氨基脲(PMPP-SC)]的晶体结构.     

取代吡唑啉衍生物的合成与生物活性

采用α-三唑-β-烷氧基芳酮与肼关环,制备了1,3-二苯基-4-三唑基吡唑啉1a,1-苯基-3-对氯苯基-4-三唑基吡唑啉1b和3-取代苯基-4-三唑基吡唑啉(7),并研究了化合物7的成环优化条件.使用α,β-不饱和酮与肼关环合成了1,3,4,5-多取代吡唑啉衍生物1c-1h,并初步用质谱法确定了该反应产物的结构;同时,以3,5-二取代吡唑啉(6)和7作为中间体合成了1-,3-,4-或5-取代的化合物2a-2l.初步生物活性测定结果表明,所合成的化合物均有一定的杀菌、激素和除草效果.     

几种吡唑啉酮衍生物铜(Ⅱ)配合物的固、液相反应合成与表征

几种吡唑啉酮衍生物铜(Ⅱ)配合物的固、液相反应合成与表征;吡唑啉酮; 铜(Ⅱ)配合物; 固相反应     

含氮杂环化合物固相化学反应研究——Ⅰ.3. -甲基-1-苯基-5-吡唑啉酮与羰基化合物的固相反应

研究了含氮杂环化合物3-甲基-1-苯基-5-吡唑啉酮(MPP)与芳香醛酮、苯偶酰衍生物和酰亚胺的固相反应及与4-芳甲叉基-3-甲基-1-苯基-5-吡唑啉酮2的固相Michael加成反应.不同的条件下,反应产物不同,发现了这些化合物之间的一些新的固相反应,由此得到了一系列新化合物,产物的结构由IR,~1HNMR,MS、元素分析及晶体X-射线衍射确定,并对反应机理进行了初步探讨.     

新型吡唑啉酮衍生物的制备

以氢氧化钾为催化剂,1-苯基-3-甲基-吡唑啉-5-酮与取代苯甲醛亚胺反应合成了新型1-苯基-3-甲基-吡唑啉-5-酮衍生物——1-苯基-3-甲基-4-(1-N-氯乙胺基-1-取代苯基)甲基-吡唑啉-5-酮,其结构经1H NMR,IR,MS和元素分析表征。     

PCB酸性蚀刻液中缓蚀剂对厚铜线路制作的影响

以2-巯基苯并噻唑(2-MBT)、 苯并三氮唑(BTA)和苯氧基乙醇(MSDS)作为缓蚀剂, 研究了其加入在酸性蚀刻液后对PCB厚铜线路的缓蚀效果。通过接触角测试、电化学测试和蚀刻因子得出缓蚀状态,并结合扫描电子显微镜观察铜表面形貌。通过分子动力学计算和量子化学模拟分析缓蚀剂在铜表面的吸附机理。结果表明,2-MBT + MSDS与BTA + MSDS的分子结构可有效地平行吸附在铜表面,且吸附能高于单一缓蚀剂。加入了2-MBT + MSDS的蚀刻液,对厚度约为33 μm铜线路进行刻蚀,铜线路的蚀刻因子提高到6.59,可有效应用于PCB厚铜线路制作。     

芳氧亚甲基咪唑啉季铵盐的合成及缓蚀性能评价

合成了苯氧亚甲基咪唑啉季铵盐（POAI）和萘氧亚甲基咪唑啉季铵盐（NOAI）,通过失重法、电化学方法研究了二者在1 mol/L HCl中对A3钢的缓蚀性能,并对二者在A3钢表面的吸附行为进行了探讨。 结果表明,二者在1 mol/L HCl中对A3钢均有较好的缓蚀作用,其中NOAI对A3钢的缓蚀性能优于POAI的缓蚀性能;两化合物均为混合型缓蚀剂。 缓蚀性能随缓蚀剂浓度和温度的增大而增大;二者在A3钢表面的吸附过程吸热,是化学吸附,符合Langmuir吸附等温式。     

3-氨基-1,2,4-三氮唑对铜的缓蚀性能和吸附行为

采用电化学和表面增强拉曼光谱(SERS)方法研究了新型环境友好型金属水处理剂3-氨基-1,2,4-三氮唑(ATA)对铜在3% NaCl溶液中的缓蚀性能和吸附行为. 结果表明, ATA对铜有较好的缓蚀作用, 其中ATA浓度为0.24 mmol·L-1时对铜的缓蚀效率最高, 为97.65%, 其吸附行为符合Langmuir吸附等温式, 吸附机理是典型的化学吸附援SERS表明, ATA分子通过很强的吸附于铜表面达到抑制其腐蚀的作用, 是ATA-与Cu+形成配合物来阻止氯离子化合物(CuCl-2)的生成.     

咪唑离子液体对铜在硫酸溶液中的缓蚀作用

采用动电位极化和电化学阻抗谱技术研究了三种新型烷基咪唑离子液体, 1-丁基-3-甲基咪唑硫酸氢盐([BMIM]HSO₄), 1-已基-3-甲基咪唑硫酸氢盐([HMIM]HSO₄), 1-辛基-3-甲基咪唑硫酸氢盐([OMIM]HSO₄), 对铜在0.5 mol·L_-1 H₂SO₄溶液中的缓蚀作用. 实验结果表明: 咪唑离子液体能有效抑制铜在硫酸溶液中的腐蚀, 相同浓度下的缓蚀效率大小顺序为[OMIM]HSO₄>[HMIM]HSO₄>[BMIM]HSO₄. 动电位极化表明三种咪唑化合物的加入对铜的阴阳极腐蚀过程均有抑制作用, 属于混合型缓蚀剂. 电化学阻抗谱用带两个常相位原件的等效电路对含两个时间常数的体系进行拟合, 发现咪唑化合物的添加会引起电荷传递电阻和双电层电容等阻抗参数的变化, 表明此类化合物通过吸附于铜电极与溶液界面起到缓蚀作用, 且这种吸附符合Langmuir吸附等温关系. 吸附过程热力学计算说明咪唑化合物在铜表面发生了自发的物理吸附.     

Corrosion of Copper in Presence of Acetic Acid Derivatives

The anodic corrosion of copper in presence of acetic acid derivatives were determined by measuring the limiting current. It is found that the rate of corrosion increased by decreasing H₃PO₄ concentration and electrode height. The experimental results showed that the inhibition efficiency increased with increasing concentration of the investigated compounds at a fixed temperature, but decreases with increasing temperature. Values of activation energy indicate that the reaction is diffusion controlled. The isotherm Langmuir, Temkin, and Flory Huggins are applied. The values of free energy of adsorption (ΔG_ads) obtained indicate the spontaneous adsorption of the inhibitor. The overall mass transfer correlations under the present conditions have been obtained using dimensional analysis method. The results agreed with the previous studies of mass transfer to rotating cylinder in turbulent flow.At the end of the corrosion process the morphology of the specimens after experiment is monitored using scanning electron microscope (SEM). SEM examination of the copper surface revealed that these compounds inhibited copper from corrosion by adsorption on its surface to form protective film. The presence of these organic compounds adsorbed on the electrode surface was confirmed by SEM investigations.     

Study of the inhibition of the corrosion of copper and zinc in HNO3 solution by electrochemical technique and quantum chemical calculations

The corrosion inhibition of copper and zinc in 0.1 M HNO₃ by 1,2,3,4-tetrazole (TTZ) and some of its derivatives has been analysed in a comparative study. Two experimental techniques have been used such as weight-loss and electrochemical polarization measurements. The results obtained reveal that the addition of these compounds reduces preferentially the corrosion of Cu rather than that of Zn. The adsorption of tetrazolic compounds on a copper surface was more favourable than their adsorption on a zinc surface. Moreover the inhibition efficiency calculated for copper was found to attain 95% in the presence of 1-phenyl-5-mercapto-1,2,3,4-tetrazole (PMT) while it remains constant at 1% for all compounds tested using zinc as electrode. Relationship between molecular structure and their inhibition efficiency was elucidated by quantum chemical calculations using the density functional theory (DFT).     

Inhibition de la corrosion du cuivre en milieu HCl 0,5 M par les composes organiques de type triazole

Some triazole-type organic compounds were tested as corrosion inhibitors for copper in 0.5 M HCl solution at 20°C. Electrochemical (potentiodynamic polarization and polarization resistance measurements) and gravimetric methods were used for this study. The obtained results showed that 3-amino-1,2,4 triazole (ATA) and 3,5 diamino-1,2,4 triazole (DTA) effectively reduce the corrosion rate of copper. The inhibition efficiency (E%) of these compounds increases with their concentrations and attains maximum values at 10⁻³M and 10⁻⁴ for ATA and DTA, respectively. The variation of efficiency with logC shows that these inhibitors are adsorbed on the metallic surface according to the Frumkin adsorption isotherm model.     

Rosmarinus officinalis extract as eco-friendly corrosion inhibitor for copper in 1 M nitric acid solution: Experimental and theoretical studies

Rosmarinus officinalis extract (ROE) was studied chemically (mass loss, ML), electrochemically impedance spectrometry (EIS), and potentiodynamic polarization (PDP) as a corrosion inhibitor in 1 M nitric acid. According to ML, ROE is effective like a copper preservative in 1 M HNO₃ acid solution at R.T by improving inhibitor concentration up to 77 % at 300 ppm and 25 °C. A study was conducted regarding the effect of temperature on copper adsorption, as well as the calculation of adsorption coefficients. Results indicated that physisorption increases with temperature, indicating a decrease in inhibition efficiency (%IE). Langmuir's adsorption model was consistent with the adsorption mechanism. Using the PDP method, the inhibitor accumulated on the copper surface in mixed forms. Moreover, EIS revealed that the value of double-layer capacitance dropped with an increased dose of ROE, while the charge transfer resistance improved. A different approach was taken to the examination of surfaces. Both theoretical studies and practical results were calculated and compared to demonstrate that the results were valid.