Spectroscopic investigations in molecularly organized solvent media. Part 3. Examination of the nitromethane selective quenching rule in aqueous anionic + cationic and anionic + nonionic mixed surfactant solutions

Applicability of the nitromethane selective quenching rule for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is examined for 20 representative PAH solutes dissolved in micellar sodium dodecylsulfate (SDS) + cetyltrimethylammonium bromide (CTAB), SDS + dodecyltrimethylammonium bromide (DTAB), SDS + Brij-35, and SDS + sodium octanoate (SO) mixed surfactant solvent media. Experimental results show that nitromethane quenched fluorescence of all 8 alternant PAHs studied in the four different solvent systems. Unexpected quenching behavior was observed, however, in the case of nonalternant PAHs. Nitromethane quenched fluorescence emission of nonalternant PAHs dissolved in the SDS + SO solvent media, which is contrary to the selective quenching rule. In the case of the mixed anionic + cationic surfactant solvent media, nitromethane quenching selectivity was restored at concentration ratios of approximately 4 : 1 (anionic:cationic) or less. Received: 22 May 1997 / Revised: 29 September 1997 / Accepted: 3 October 1997     

Cetylpyridinium chloride micelles as a selective fluorescence quenching solvent media for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons

Fluorescence behavior of 41 polycyclic aromatic hydrocarbons (PAHs) dissolved in aqueous micellar cetyltrimethylammonium chloride (CTAC) solvent media and in five different cetyltrimethylammonium chloride + cetylpyridinium chloride (CPC) surfactant mixtures is reported. Experimental fluorescence measurements reveal that CPC is a selective fluorescence quenching agent for alternant PAHs. The cetylpyridinium ion effectively quenched emission intensities of the 21 alternant PAHs studied. Emission intensities of nonalternant PAHs, with a few noted exceptions, were unaffected by the presence of CPC in the mixed cationic surfactant micelles.     

Spectroscopic investigations in molecularly organized solvent media. Part 5. Fluorescence behavior of polycyclic aromatic hydrocarbons dissolved in cetylpyridinium chloride+zwitterionic and cetyltrimethylammonium chloride+zwitterionic mixed surfactant systems

Applicability of the cetylpyridinium (CPy(+)) cation as a selective fluorescence quenching agent for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is examined for 25 representative solutes dissolved in two aqueous micellar cetylpyridinium chloride (CPC)+zwitterionic surfactant solvent media. Experimental results show that the CPy(+) cation effectively quenched fluorescence emission of all 10 alternant PAHs studied despite the presence of strong intramicellar coulombic interactions. Emission intensities of the 15 nonalternant PAHs also decreased upon addition of CPC to the zwitterionic surfactant solutions. Reduction in emission intensities for the nonalternant PAHs is rationalized in terms of changes in micellar structure caused by the coulombic interactions, rather than from loss of quenching selectivity by the CPy(+) cation.     

Spectrochemical investigations in molecularly organized solvent media: evaluation of pyridinium chloride as a selective fluorescence quenching agent of polycyclic aromatic hydrocarbons in aqueous carboxylate-terminated poly(amido) amine dendrimers and anionic micelles

The ability of pyridinium chloride (PC) to selectively quench alternant as opposed to nonalternant polycyclic aromatic hydrocarbons (PAHs) in organized media is examined. PC was previously shown to be a selective quenching agent of alternant PAHs in neat polar solvents. Carboxylate-terminated poly(amido) amine (PAMAM-CT) dendrimers and anionic surfactants – sodium dodecanoate (SD), sodium octanoate (SO), and sodium dodecylsulfate (SDS) – were chosen as the solubilizing media for this study. Selective quenching of alternant PAHs is observed in the presence of the SDS and SO micelles. However, the extent of PAH quenching in SO is significantly reduced compared to PAHs dissolved in either water or SDS micelles. In the case of the smaller generation 4.5 (G4.5) PAMAM-CT dendrimers, PC was prevented from quenching both alternant and nonalternant PAHs to any appreciable extent. The dendrimer is able to “protect” the PAHs from the PC quencher that resides at the dendrimer surface. Both, SD and G5.5 PAMAM-CT precipitated out of solution with the addition of PC. Differences between traditional micelles and “unimolecular micelle” dendrimers were also examined. These studies further confirm that the PAHs did not reside in the “analogous” palisade region of the dendrimers as they do in micelles. The PAHs must reside in the outermost branches of the dendrimer, but sufficiently far enough away from the charged surface groups, where PC associated, to prevent fluorescence quenching. This work further illustrates the differences between “unimolecular micelle” dendrimers and traditional micelles. Received: 27 July 2000 / Revised: 25 September 2000 / Accepted: 27 September 2000     

Spectrochemical investigations in molecularly organized solvent media: evaluation of pyridinium chloride as a selective fluorescence quenching agent of polycyclic aromatic hydrocarbons in aqueous carboxylate-terminated poly(amido) amine dendrimers and anionic micelles

The ability of pyridinium chloride (PC) to selectively quench alternant as opposed to nonaltemant polycyclic aromatic hydrocarbons (PAHs) in organized media is examined. PC was previously shown to be a selective quenching agent of alternant PAHs in neat polar solvents. Carboxylate-terminated poly(amido) amine (PAMAM-CT) dendrimers and anionic surfactants--sodium dodecanoate (SD), sodium octanoate (SO), and sodium dodecylsulfate (SDS)--were chosen as the solubilizing media for this study. Selective quenching of alternant PAHs is observed in the presence of the SDS and SO micelles. However, the extent of PAH quenching in SO is significantly reduced compared to PAHs dissolved in either water or SDS micelles. In the case of the smaller generation 4.5 (G4.5) PAMAM-CT dendrimers, PC was prevented from quenching both alternant and nonalternant PAHs to any appreciable extent. The dendrimer is able to "protect" the PAHs from the PC quencher that resides at the dendrimer surface. Both, SD and G5.5 PAMAM-CT precipitated out of solution with the addition of PC. Differences between traditional micelles and "unimolecular micelle" dendrimers were also examined. These studies further confirm that the PAHs did not reside in the "analogous" palisade region of the dendrimers as they do in micelles. The PAHs must reside in the outermost branches of the dendrimer, but sufficiently far enough away from the charged surface groups, where PC associated, to prevent fluorescence quenching. This work further illustrates the differences between "unimolecular micelle" dendrimers and traditional micelles.     

Examination of dodecylpyridinium chloride as a potentially selective fluorescence quenching agent for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons

Fluorescence behavior is reported for 13 alternant and 12 nonalternant polycyclic aromatic hydrocarbons (PAHs) dissolved in aqueous micellar cetyltrimethylammonium chloride (CTAC)+dodecylpyridinium chloride (DDPC) and sodium dodecylsulfate (SDS)+DDPC mixed surfactant solvent media. Experimental measurements indicate that the dodecylpyridinium cation selectively quenches fluorescence emission of alternant PAHs. Emission intensities of nonalternant PAHs, with a few noted exceptions, essentially remain constant, irrespective of both DDPC concentration and cosurfactant headgroup charge.     

Spectroscopic properties of polycyclic aromatic compounds Part 6. The nitromethane selective quenching rule visited in aqueous micellar zwitterionic surfactant solvent media

Applicability of the nitromethane selective quenching rule for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is examined for 58 representative PAH solutes dissolved in micellar N-hexadecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate and in micellar N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate solvent media. Results of measurements show that zwitterionic surfactants can be considered, for the most part, as providing a polar solubilizing media as far as the nitromethane selective quenching rule is concerned. Nonalternant PAHs that contain electron donating methoxy- and hydroxy-functional groups (and methyl-groups to a much lesser extent) are noted exceptions.     

Spectrochemical evaluation of pyridinium chloride as a possible selective fluorescence quenching agent of polycyclic aromatic hydrocarbons in water and neat acetonitrile

Pyridinium chloride (PC) is examined as a selective, fluorescence quenching agent for alternant as opposed to nonalternant polycyclic aromatic hydrocarbons (PAHs) in two polar solvents - water and acetonitrile. Nine alternant and 13 nonalternant PAHs were dissolved in water and acetonitrile and a total of 0.2 M of pyridinium chloride was added. The resulting change in fluorescence intensity was observed and reported as the Stern-Volmer quenching constant. Results show that PC is a selective quencher in both polar solvents. It selectively quenches the fluorescence emission intensity of alternant PAHs while leaving the nonalternant PAH fluorescence emission virtually unchanged. These results agree with the selective quenching behavior seen for PC surfactant analogs, cetylpyridinium chloride (CPC) and dodecylpyridinium chloride (DDPC). Furthermore, these results illustrate that the presence of a surfactant or micelle is not a requirement for selective quenching. The selective quencher PC is applicable to situations where a surfactant is not desirable or soluble.     

Selective fluorescence quenching of polycyclic aromatic hydrocarbons by nitromethane within room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate

Recently discovered room temperature ionic liquids (RTILs) show tremendous promise to replace volatile organic compounds (VOCs). Investigation of these RTILs as solvents is in the very early stages. Before the full potential of these RTILs is realized, much more information about them as solvent systems must be obtained. The applicability of one such RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆), as a solvent toward analysis for polycyclic aromatic hydrocarbons (PAHs) is explored. The steady-state emission behavior of six PAHs along with the fluorescence quenching by nitromethane within BMIM PF₆ is investigated. The steady-state emission of six PAHs showed a bathochromic shift in BMIM PF₆ compared to acetonitrile, indicating possibly a more dipolar environment. Further, the nitromethane quenching of PAH emission strongly suggests a selective nature as the emission from alternant PAHs are quenched while that from nonalternant PAHs is not. The PAH-nitromethane quenching behavior within BMIM PF₆ is compared with that observed in the polar aprotic solvent acetonitrile, and a polar and similar viscosity (to BMIM PF₆) solvent system, 90 wt.% glycerol in water. It is observed that the PAH-nitromethane quenching within BMIM PF₆ and 90 wt.% glycerol in water is less efficient than in acetonitrile. This observation is suggested to arise from solvent viscosity.     

Foams stabilized by mixed cationic gemini/anionic conventional surfactants

The mixed adsorption of a cationic gemini surfactant, ethanediyl-1,2-bis(dodecyldimethylammonium bromide) (abbreviated as 12-2-12), and an anionic conventional surfactant, sodium dodecyl sulfate (SDS), was examined using surface tension measurements. The viscoelastic properties of the mixed films were investigated by dilational interfacial rheology technique. The results showed that the addition of SDS promoted the close packing of adsorbed molecules at the interface, which increased the dilational elasticity of the mixed films. The stability of the foams was determined by the half-life of foam height collapse. The foams generated by 12-2-12/SDS mixtures were more stable than that formed by pure 12-2-12. In the presence of sodium bromide, the foam stability was further enhanced and the surfactant concentration required to attain the maximum effect in stabilizing foams was greatly reduced. The high foam stability could well relate to the high elasticity of the film.     

Solvation dynamics in aqueous anionic and cationic micelle solutions: sodium alkyl sulfate and alkyltrimethylammonium bromide

Solvation dynamics of the fluorescence probe, coumarin 102, in anionic surfactant, sodium alkyl sulfate (C(n)H(2n+1)SO(4)Na; n = 8, 10, 12, and 14), and cationic surfactant, alkyltrimethylammonium bromide (C(n)H(2n+1)N(CH(3))(3)Br; n = 10, 12, 14, and 16), micelle solutions have been investigated by a picosecond streak camera system. The solvation dynamics in the time range of 10(-10)-10(-8) s is characterized by a biexponential function. The faster solvation time constants are about 110-160 ps for both anionic and cationic micelle solutions, and the slower solvation time constants for sodium alkyl sulfate and alkyltrimethylammonium bromide micelle solutions are about 1.2-2.6 ns and 450-740 ps, respectively. Both the faster and the slower solvation times become slower with longer alkyl chain surfactant micelles. The alkyl-chain-length dependence of the solvation dynamics in both sodium alkyl sulfate and alkyltrimethylammonium bromide micelles can be attributed to the variation of the micellar surface density of the polar headgroup by the change of the alkyl chain length. The slower solvation time constants of sodium alkyl sulfate micelle solutions are about 3.5 times slower than those of alkyltrimethylammonium bromide micelle solutions for the same alkyl-chain-length surfactants. The interaction energies of the geometry optimized mimic clusters (H(2)O-C(2)H(5)SO(4)(-) and H(2)O-C(2)H(5)N(CH(3))(3)(+)) have been estimated by the density functional theory calculations to understand the interaction strengths between water and alkyl sulfate and alkyltrimethylammonium headgroups. The difference of the slower solvation time constants between sodium alkyl sulfate and alkyltrimethylammonium bromide micelle solutions arises likely from their different specific interactions.     

Quenching of zinc phthalocyanine excited states by viologen surfactant assemblies——The influence of microenvironment

A series of functional surfactants of N-alkyl-N'-butyl viologens has been synthesized.The quenching of excited singlet and triplet states of zinc phthalocyanine was studied in DMSOand in mixed micelles containing the functional surfactant as one and cationic cetyl trimethylam-monium bromide(CTAB),anionic sodium dodecylsulfate(SDS)and neutral TX-100 surfactantas the other component.Fluorescence quenching and laser photolysis studies indicate that thefunctional surfactants are solubilized at different sites in micelles,the process depends on chainlength and exerts great influence on the quenching of zinc phthalocyanine excited states.     

Counterion binding on mixed anionic/cationic micelles

Measurements of counterion binding in mixtures of surfactant aqueous solutions have been performed to study the structure of the anionic/cationic mixed micelle/solution interface. The mixtures studied were SDS/DDAC and STS/TDPC. The binding of chloride and sodium ions to mixed anionic/cationic micelles was measured using ion-specific electrodes. Counterion binding was found to be strongly dependent on the molar ratio of surfactants present. The mixed micelle/solution interface includes the headgroups of both surfactants and counterions of surfactant in excess. The addition of oppositely charged surfactant caused an increasing dissociation of counterions.     

Interactions between zwitterionic and conventional anionic and cationic surfactants

Critical micelle concentration (cmc) values have been determined for the mixed zwitterionic/anionic surfactant systems of N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (ZW3-12)/sodium dodecyl sulfate (SDS), N-dodecyl-N,N-(dimethylammonio)butyrate (DDMAB)/SDS, N-octyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (ZW3-08)/sodium octyl sulfate (SOS), and the zwitterionic/cationic systems of ZW3-12/dodecyltrimethylammonium bromide (DTAB), DDMAB/DTAB. Conductivity studies and nuclear magnetic resonance (NMR) spectroscopy were the methods employed for cmc determinations. The degree of nonideality of the interaction in the micelle (beta(m)), for each system, was determined according to Rubingh's nonideal solution theory. Evidence was found for the existence of strong interactions between zwitterionic and anionic surfactants in each of the zwitterionic/anionic systems. The ZW3-08/SOS and DDMAB/SDS systems behaved synergistically at all mole fractions studied while the ZW3-12/SDS system exhibited synergistic behavior above mole fractions of 0.30. Greater negative deviations from ideal behavior were demonstrated in the DDMAB/SDS system than in the other two zwitterionic/anionic systems. The zwitterionic/cationic systems of ZW3-12/DTAB and ZW3-08/OTAB displayed only slight deviations from ideal behavior, therefore indicating near ideal mixing.     

Steady-state fluorescence investigations of aqueous binary mixtures of myristyl alcohol based bis-sulfosuccinate anionic gemini surfactant and effect of different conventional surfactants therein

The present research work is associated with the fluorescence investigations of binary aqueous mixed surfactants solutions of anionic bis-sulfosuccinate gemini surfactant (BSGSMA_1,8) and three different conventional surfactants—anionic viz. sodium dodecyl sulfate (SDS), cationic viz. cetyl trimethyl ammonium bromide (CTAB), and nonionic surfactant viz. Triton X 100. Steady-state fluorescence spectroscopy technique has been utilized to examine the micellization behavior of aqueous solution of pure myristyl alcohol-based BSGSMA_1,8 having flexible methylene chain [(CH₂)₈] as spacer group. Critical micelle concentration (CMC), aggregation number (N), and micropolarity of pure and mixed surfactants systems were explored during the investigations. The results revealed the best synergism behavior of prepared gemini BSGSMA_1,8 with SDS as compared to CTAB and Triton X 100. The maximum reduction in the value of pyrene intensity ratio (I₁/I₃) was observed for gemini and SDS mixed surfactant solution. On the other hand, the increased I₁/I₃ value of mixed gemini with Triton X 100 exhibited that mixed surfactant system of anionic gemini BSGSMA_1,8 with non-ionic Triton X 100 is not as compact as other mixed surfactant systems. Aggregation number increased and micropolarity decreased with increased concentration of gemini surfactants.     

X-ray fluorescence spectrometric determination of sulfur-containing anionic surfactants in water after their enrichment on a membrane filter as an ion-pair complex with a cationic surfactant.

Anionic surfactants containing sulfur in their structure were enriched on a mixed cellulose ester membrane filter (MF) by filtration as an ion-pair complex with a cationic surfactant. After their enrichment, the anionic surfactants were determined by X-ray fluorescence spectrometry of the sulfur enriched on the MF. A linear calibration was obtained over a concentration range from 0.05 to 0.8 mg L(-1) of sodium dodecyl sulfate as a standard material with less than 6% RSD. The detection limit based on 3s for the reagent blank was 2 microg L(-1). This method is very simple, rapid and highly selective for sulfur-containing surfactants, and does not require any organic solvent extraction. This method was applied to the determination of anionic surfactant in some urban river waters where domestic wastewater was discharged. The results were compared with those obtained by conventional solvent extraction-spectrophotometry. The distribution of the analyte complexes within the MF where the ion-pair was retained is also discussed.     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

Effects of addition of anionic and cationic surfactants to poly(N-isopropylacrylamide) microgels with and without acrylic acid groups

The interaction of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant hexadecyl trimethyl ammonium bromide with poly(N-isopropylacrylamide) (PNIPAAM) microgels with and without poly(acrylic acid) (PAA) was investigated by means of dynamic light scattering (DLS), zeta potential, and turbidimetry measurements. The DLS results show that the PNIPAAM microgels with PAA will contract when an anionic or cationic surfactant is added to the suspension, while the PNIPAAM microgels without PAA expand in the presence of an ionic surfactant. A collapse of the PNIPAAM microgels is observed when the temperature is increased. From the zeta potential measurements, it is observed that the charge density of PNIPAAM microgels in the presence of an ionic surfactant is significantly affected by temperature and the attachment of the negatively charged PAA groups. The turbidity measurements clearly indicate that the interaction between PNIPAAM and SDS is more pronounced than that of the cationic surfactant.     

Synergistic effect of mixed anionic and cationic surfactant systems on the interfacial tension of crude oil-water and enhanced oil recovery

Surfactant based enhanced oil recovery (EOR) is an interesting area of research for several petroleum researchers. In the present work, individual and mixed systems of anionic and cationic surfactants consisting of sodium dodecyl sulphate (SDS) and cetyltrimethylammonium bromide (CTAB) in different molar ratios were tested for their synergistic effect on the crude oil-water interfacial tension (IFT) and enhanced oil recovery performance. The combination of these two surfactant systems showed a higher surface activity as compared to individual surfactants. The effect of mixed surfactant systems on the IFT and critical micellar concentration (CMC) is strongly depends on molar ratios of the two surfactant. Much lower CMC values were observed in case of mixed surfactant systems prepared at different molar ratios as compared to individual surfactant systems. The lowest CMC value was found when the molar concentration of SDS was higher than the CTAB. When the individual and mixed surfacant systems were tested for EOR performance through flooding experiments, higher ultimate oil recovery was obtained from mixed surfactant flooding compared to individual surfactants. Combination of SDS and CTAB or probably other anionic-cationic surfactants show synergism with substantial ability to reduce crude oil water IFT and can be a promising EOR method.     

The effect of anionic and cationic surfactants on indicators and measurement of dissociation constants with two different methods

The effects of cationic cetyltrimethylammonium bromide (CTAB), hexadecylpyridinum chloride (HDPC) and anionic sodium dodecylsulphate (SDS) surfactants on dissociation constants and transition intervals of methyl red, methyl orange and cresol red were studied spectrophotometrically. The results show that all studied indicators strongly interacted with cationic micelles (CTAB and HDPC). In the case of methyl red, relatively strong interaction with anionic surfactant (SDS) was obtained. However, no effect of SDS on dissociation constants of cresol red and methyl orange was observed. The dissociation constants of indicators were calculated with both the proposed and known chemometric (DATAN) method with a reasonable agreement on the data achieved.