Oxygen nonstoichiometry of Sr(Co,Fe)O3−δ-based perovskites: I. Coulometric titration of SrCo0.85Fe0.10Cr0.05O3−δ by the two-electrode technique

The p(O₂)–T–δ diagram of perovskite-type SrCo_0.85Fe_0.10Cr_0.05O_3−δ was determined by the coulometric titration technique in the temperature range 770–1250 K at oxygen partial pressures from 8 10⁻¹⁰ to 0.5 atm. Stability of the cubic perovskite phase of SrCo_0.85Fe_0.10Cr_0.05O_3−δ, existing down to the oxygen pressures of 10⁻³–10⁻⁵ atm, was found to be slightly higher than that of SrCo_0.80Fe_0.20O_3−δ, probably due to stabilization of oxygen octahedra neighboring Cr⁴⁺ cations. When the oxygen nonstoichiometry of the Cr-containing perovskite decreases from 0.47 to 0.38, the partial molar enthalpy and entropy for overall oxygen incorporation reaction vary in the ranges −165 to −60 kJ mol⁻¹ and 90 to 150 J mol⁻¹ K⁻¹, respectively. Within the stability limits of the single perovskite phase, the p(O₂)–T–δ diagram can be adequately described by equilibrium processes of oxygen incorporation, cobalt disproportionation and interaction of cobalt and iron cations, with the thermodynamic functions independent of defect concentrations. Increasing grain size in SrCo_0.85Fe_0.10Cr_0.05O_3−δ ceramics from submicron size to 100–200 μm has no effect on the oxygen thermodynamics. The two-electrode coulometric titration technique, based on the alternate use of electrodes for oxygen pumping and e.m.f. measurements, is described and verified by studying oxygen nonstoichiometry of La_0.3Sr_0.7CoO_3−δ and PrO_x.     

Superconductivity magnetism and low temperature specific heat in YBa2(Cu1−xFex)3O7−δ with δ0 and δ1

Magnetic and low temperature specific heat measurements have been performed on iron doped YBa₂(Cu_1−xFe_x)₃O_7−δ samples with different oxygen contents (δ0 and δ1). Iron doping induces an orthorhombic to tetragonal transition and a decrease of both T_c and diamagnetic signal. Low temperature specific heat measurements reveal a Schottky type anomaly for δ0 samples with x=0.01 (1.8 K) and x=0.02 (3 K). This anomaly is attributed to magnetic interactions within iron limited chains. A numerical analysis of this effect is proposed.     

Magnetic and magnetotransport properties of Co-doped manganites with perovskite structure

A systematic study of the doping of the Mn-sites by cobalt in three series of manganites — La_0.76Ba_0.24(Mn_1−xCo_x)O₃ single crystals, La_2/3Ba_1/3(Mn_1−xCo_x)O₃ and La(Mn_1−xCo_x)O₃ ceramics has been performed. It was found that La(Mn_1−xCo_x)O₃ annealed at 800°C in the range 0.4x0.9 is a mixture of ferromagnetic domains with ordered Mn and Co ions and ionically disordered spin-glass domains. In the quenched samples the fraction of spin-glass-type component increases strongly. The La_2/3Ba_1/3(Mn_1−xCo_x)O₃ solid solutions exhibit also an evidence for phase separation in the range 0.5x0.8. All the La(Mn_1−xCo_x)O₃ samples show an insulating behavior, however, magnetoresistance reduces strongly when the cobalt content rises to x=0.5. The La_0.76Ba_0.24(Mn_1−xCo_x)O₃ single crystals show first-order phase transition below their Curie points associated with a change of ground state of the Co²⁺ ions. The magnetic phase diagrams are depicted. The results are discussed in terms of positive Mn³⁺–O–Mn⁴⁺, Mn³⁺–O–Mn³⁺, Mn⁴⁺–O–Co²⁺ and negative Mn⁴⁺–O–Mn⁴⁺, Co²⁺–O–Co²⁺, Co²⁺–O–Mn³⁺ superexchange interactions as well as Co²⁺ and Mn⁴⁺ ionic ordering.     

Charge order melting and magnetic transition in Nd0.5(1+x)Ca0.5(1−x)Mn(1−x)CrxO3 system

The magnetic property of double doped manganite Nd_0.5(1+x)Ca_0.5(1−x)Mn_(1−x)Cr_xO₃ with a fixed ratio of Mn³⁺:Mn⁴⁺=1:1 has been investigated. For the undoped sample, it undergoes one transition from charge disordering to charge ordering (CO) associated with paramagnetic (PM)-antiferromagnetic (AFM) phase transition at T<250 K. The long range AFM ordering seems to form at 35 K, rather than previously reported 150 K. At low temperature, an asymmetrical M-H hysteresis loop occurs due to weak AFM coupling. For the doped samples, the substitution of Cr³⁺ for Mn³⁺ ions causes the increase of magnetization and the rise of T_c. As the Cr³⁺ concentration increases, the CO domain gradually becomes smaller and the CO melting process emerges. At low temperature, the FM superexchange interaction between Mn³⁺ and Cr³⁺ ions causes a magnetic upturn, namely, the second FM phase transition.     

Thermogalvanic power and fast ion conduction in δ-Bi2O3 and δ-(Bi2O3)1−x(R2O3)x with R = Y, Tb---Lu

The thermogalvanic power (Seebeck coefficient) of O^2- conducting δ-Bi₂O₃ and δ-(Bi₂O₃)_1−x(Y₂O₃)_x has been measured directly as a function of temperature and partial oxygen pressure in N₂---O₂ mixtures. The of δ-(Bi₂O₃)_0.75(R₂O₃)_0.25 with R = Tb---Lu was indirectly determined using an isothermal concentration cell technique. Except for pure δ-Bi₂O₃, the heat of transport is much smaller than the activation energy for O^2- conduction for all materials. The vibrational freedom of O²⁻ ions in all δ-stabilized materials is reflected in their IR spectra at room temperature. Two prototypes of a thermogalvanic P_O2 meter were tested.     

Spectral characterization and energy levels of Cr:Sc2(MoO4)3 crystal

This paper reports the spectral properties and energy levels of Cr³⁺:Sc₂(MoO₄)₃ crystal. The crystal field strength Dq, Racah parameter B and C were calculated to be 1408 cm⁻¹, 608 cm⁻¹ and 3054 cm⁻¹, respectively. The absorption cross sections σ_α of ⁴A₂→⁴T₁ and ⁴A₂→⁴T₂ transitions were 3.74×10⁻¹⁹ cm² at 499 nm and 3.21×10⁻¹⁹ cm² at 710 nm, respectively. The emission cross section σ_e was 375×10⁻²⁰ cm² at 880 nm. Cr³⁺:Sc₂(MoO₄)₃ crystal has a broad emission band with a broad FWHM of 176 nm (2179 cm⁻¹). Therefore, Cr³⁺:Sc₂(MoO₄)₃ crystal may be regarded as a potential tunable laser gain medium.     

Structural, thermal and conductive properties of Bi4−xMxV2O11 (M = La, Gd; 0 x 0.4) compounds

Bi_4−xM_xV₂O₁₁ (M = La, Gd) was prepared by solid state reactions. The amount of La and Gd in the (Bi_4−xM_xV₂O₁₁) was varied in the range of (0 x 0.4). The addition of La and Gd to Bi₄V₂O₁₁ electrolyte was found to stabilize the β crystalline phase for x 0.3. In addition, the phase transition corresponding β- to γ-phases are evident in the ionic conductivity plots as well as in XRD, DSC profiles of x 0.3 samples. The highest ionic conductivity was observed in Bi_3.9La_0.1V₂O₁₁ and Bi_3.8Gd_0.2V₂O₁₁ samples in the range of 10⁻³–10⁻⁴ S/cm for 700–500 °C. These results were supported by impedance spectroscopy, X-ray diffraction (XRD) and differential scanning calorimetry (DSC).     

Magnetische untersuchungen an mischkristallen der quasibinären legierungssysteme (Cd Te)1-x (Mn Te)x und (Sn Te)1-x (Mn Te)x

The magnetic susceptibility and magnetization are presented for polycrystalline samples of the alloy systems Cd_1-xMn_xTe 0 < x 0.1 and Sn_1-xMn_xTe 0 < 4 0.4. The magnetic measurements were performed between 2.3 K and 300 K in external magnetic fields up to 11 kOe. At sufficiently high temperatures the susceptibility can be described by a Curie-Weiss law. In the system Sn_1-xMn_xTe θ_p is positive. A linear dependence θ_p ∞ x was found with θ_p(0.4) = 49 K. In the series Cd_1-xMn_xTe θ_p changes sign. For θ < x < 0.04 θ_p is positive with a maximum θ_p ≈ 10 K at x = 0.02. In the region x #62; 0.04 θ_p becomes negative with θ_p = -35 K at x = 0.1. The effective spin value of manganese is S_eff #62; 5/2 for all the samples. The investigation was done to check the assumption that ferromagnetic coupling may exist in tellurides of manganese if the shortest distance d_MnMn is greater than 3.4 Å. This hypothesis has been stated. In the case θ_p #62; 0 the results are partly explained by the RKKY exchange coupling.     

Structural and optical properties of Ba(Ti1−x,Nix)O3 thin films prepared by sol–gel process

Ba(Ti_1−x,Ni_x)O₃ thin films were prepared on fused quartz substrates by a sol–gel process. X-ray diffraction and Raman scattering measurements showed that the films are of pseudo-cubic perovskite structure with random orientation and the change of lattice constant caused by Ni-doping with different concentrations is very small. Optical transmittance spectra indicated that Ni-doping has an obvious effect on the energy band structure. The energy gap of Ba(Ti_1−x,Ni_x)O₃ decreased linearly with the increase of Ni concentration. It indicates that the adjusting of band gap can be achieved by controlling the Ni-doping content accurately in Ba(Ti_1−x,Ni_x)O₃ thin films. This has potential application in devices based on ferroelectric thin films.     

Luminescence and energy transfer in Eu, Mn co-doped Li4SrCa(SiO4)2 for white light-emitting-diodes

Li₄(Sr_0.96Eu_0.04)(Ca_1 − xMn_x)(SiO₄)₂ phosphors were synthesized by solid-state reactions and photoluminescence (PL) properties were investigated. These phosphors have intense absorption in n-UV region, which is suitable for excitation of UV LEDs. The orange-reddish emission of Mn²⁺ can be adjusted by changing the Mn²⁺/Eu²⁺ ratio. Energy transfer from Eu²⁺ to Mn²⁺ is observed. Li₄(Sr_0.96Eu_0.04)(Ca_1 − xMn_x)(SiO₄)₂ phosphors could be used in white LEDs.     

Water incorporation into the Ba2(In1 − xMx)2O5‪ (M = Sc 0 ≤ x < 0.5 and M = Y 0 ≤ x < 0.35) system and protonic conduction

Ba₂(In_1 − xM_x)₂O_{5 − y / 2}(OH)_y‪□_{1 − y / 2} (y ≤ 2; M = Sc³⁺ 0 ≤ x < 0.5 and M = Y³⁺ 0 ≤ x < 0.35) compounds were prepared by reacting Ba₂(In_1 − xM_x)₂O₅‪ phases with water vapor. This reaction is reversible. Analyses of the hydration process by TG and XRD studies show that the thermal stability of hydrated phases increases when x increases and that the incorporation of water is not a single-phase reaction inducing either a crystal system or space group modification. Fully hydrated (y = 2) and dehydrated (y = 0) samples have been stabilized at room temperature and characterized for all compositions. In wet air, all phases show a proton contribution to the total conductivity at temperatures between 350 and 600 °C. At a given temperature, proton conductivity increases with the substitution ratio and reaches at 350 °C, 5.4 10^− 3 S cm^− 1 for Ba₂(In_0.65Sc_0.35)₂O_4.2□_0.2(OH)_1.6.     

Structure and superconducting properties of Bi2Ba2−xMxCuO6+δ

The effect of oxygen nonstoichiometry and barium cation substitution on the structure and superconducting properties of Bi₂Ba_2−xM_xCuO_{6 +δ}(M = Sr, Ru, Rh, Pd, In, Sb or Pb;xchanged from 0 to 0.2) were studied. The cation-substituted samples annealed in oxygen flow contain a superconducting phase withT_c^initnear 95 K.     

Dispersive optical constants of a-Se100−xSbx films

Thin films of amorphous Se_100−xSb_x (x=5,10 and 20 at%) system are deposited on a silicon substrate at room temperature (300 K) by thermal evaporation technique. The optical constant such as refractive index (n) has been determined by a method based on the envelope curves of the optical transmission spectrum at normal incidence by a Swanpoel method. The oscillator energy (E_o), dispersion energy (E_d) and other parameters have been determined by the Wemple–DiDomenico method. The absorption coefficient (α) has been determined from the reflectivity and transmitivity spectrum in the range 300–2500 nm. The optical-absorption data indicate that the absorption mechanism is a non-direct transition. We found that the optical band gap, E_g^opt, decreases from 1.66±0.01 to 1.35±0.01 eV with increase Sb content.     

The electrical conductivity of δ-Bi2O3 stabilized by isovalent rare-earth oxides R2O3

The phenomenon of δ-phase stabilization in the systems (Bi₂O₃)_0.75(R₂O₃)_0.25 where R = lanthanide metal (including La, but Pm excepted) was investigated. The electrical conductivity of those systems, which did show δ-stabilization, was investigated; the system (Bi₂O₃)_1−x(Yb₂O₃)_x was studied in more detail. A Vegard-like relation between the cubic cell-axis and cationic radius of the substituted trivalent metal ion was found. A model is presented which accounts for results of electrical conductivity measurements and thermogalvanic measurements as well.     

Defect chemistry and oxygen transport of (La0.6Sr0.4 − xMx)0.99Co0.2Fe0.8O3 − δ, M = Ca (x = 0.05, 0.1), Ba (x = 0.1, 0.2), Sr: Part I: Defect chemistry

This paper is the first part of a two part series, where the effects of varying the A-site dopant on the defect chemistry, the diffusion coefficient and the surface catalytic properties of the materials (La_0.6Sr_0.4 − xM_x)_0.99Co_0.2Fe_0.8O_3 − δ, M = Sr, Ca (x = 0.05, 0.1), Ba (x = 0.1, 0.2) (LSMFC) have been investigated. In part I, the findings on the defect chemistry are reported, while the transport properties are reported in part II. Substitution of Sr²⁺ ions with Ca²⁺ ions (smaller ionic radius) and Ba²⁺ ions (larger ionic radius) strains the crystal structure differently for each composition while keeping the average valence of the cations constant. The Ba²⁺ containing materials show the largest oxygen loss at elevated temperatures, while the purely Sr²⁺ doped material showed the smallest oxygen loss. This was reflected in the partial oxidation entropy of the materials. The measured oxygen loss was modelled with point defect chemistry models. Measurements at very low p_O2 showed several phase transitions.     

BaAl12O19:Mn green emitting nanophosphor for PDP application synthesized by solution combustion method and its Vacuum Ultra-Violet Photoluminescence Characteristics

Nanostructured BaAl₁₂O₁₉:Mn²⁺ phosphor particles of nano-rod morphology with diameter 40-100 nm and length up to 200-600 nm has been synthesized by solution combustion method and its photoluminescence characteristics have been studied by Vacuum Ultra-Violet Photoluminescence spectrometer (VUVPL) under 147 nm excitation. The crystallographic phase purity of BaAl₁₂O₁₉:Mn²⁺ nanostructured phosphor particle synthesized by solution combustion approach is confirmed by X-ray diffraction (XRD). The broadening of XRD diffraction peaks indicates nanocrystalline nature of particles present in powder. The emission spectrum of BaAl₁₂O₁₉:Mn²⁺ nanophosphor on 147 nm excitation consists of a wide green band with a peak at about 515 nm, which is due to a 3d⁵ (⁴T_1g)-3d⁵ (⁶A_1g) transition corresponds of Mn²⁺ ions. It is found that the concentration quenching is obtained when Mn²⁺ content (x) is 0.05 in BaAl₁₂O₁₉:xMn²⁺ nanophosphor on 147 nm excitation. The decay time of 3d⁵ (⁴T_1 g)-3d⁵ (⁶A_1 g) transition of Mn²⁺ ions at 147 nm excitation is about 23 ms for BaAl₁₂O₁₉:Mn²⁺ nanophosphor. This nanostructured green emitting BaAl₁₂O₁₉:Mn²⁺ phosphor can find potential application in Plasma Display Panels (PDPs) and mercury-free fluorescent lamps.     

Weak ferromagnetism in BiFeO3 doped with titanium

The Bi_1−xA_xFe_1−xTi_xO₃ (A—Ca, Sr, Pb, Ba) and BiFe_1−xTi_xO_3+δ systems have been studied using X-ray, neutron powder diffraction and magnetization measurements in a magnetic field up to 14 T. It was found that all Bi_1−xA_xFe_1−xTi_xO₃ solid solutions are rhombohedral up to x=0.3. In the case of BiFe_1−xTi_xO_3+δ the rhombohedral distortion preserved up to x=0.11. A homogeneous weakly ferromagnetic state was found for Bi_1−xCa_xFe_1−xTi_xO₃ (0.15≤x≤0.25) and BiFe_1−xTi_xO_3+δ (0.06≤x≤0.11), probably due to magnetoelectric interactions, whereas Bi_1−xA_xFe_1−xTi_xO₃ (A—Sr, Pb, Ba) compounds above doping level x>0.1 seem to be collinear antiferromagnets.     

Preparation and characterization of Y1−xPrxBa2Cu3O7−δ single crystals

We present a reliable method for growing single crystals of Y_1−xPr_xBa₂Cu₃O_7−δ high-T_c superconductors in ZrO₂ crucibles. This method results in crystals with greatly improved superconducting properties compared to crystals grown with the previously reported methods which use Al₂O₃ crucibles. We describe techniques for crystal growth in both Al₂O₃ and ZrO₂ crucibles using an excess of BaCo₃ and CuO as the flux. The crystals were characterized by means of DC magnetic-susceptibility measurements, electrical-resistivity measurements, and electron microprobe analysis. The effects of Al contamination on the conditions for crystal growth and on the superconducting properties of the crystals are found to be quite significant.     

Study of the magnetization and transport properties of the La(2+x)/3Sr(1−x)/3Mn1−xCrxO3 (0≤x≤0.2) system

The samples with the Mn³⁺/Mn⁴⁺ ratio fixed at 2:1 La_(2+x)/3Sr_(1−x)/3Mn_1−xCr_xO₃ (0≤x≤0.20) have been prepared. The magnetic, electrical transport, and magnetoresistance properties have been investigated. Remarkable transport and colossal magnetoresistance (CMR) effect, as well as cluster glass (CG) behaviors have been clearly observed in the samples studied. It was found that the Curie temperature T_c and insulator−metal transition temperature T_p1 are strongly affected by Cr substitution. The experiment observations are discussed by taking into account the variety of tolerance factors t; the effects of A-site radius 〈r_A〉 and the A-site mismatch effect (σ²).     

Magnetic properties and specific heat of LaMn1−xTixO3+δ (0<x0.2)

We present a magnetic study of the insulating perovskite LaMn_1−xTi_xO_3+δ (0<x0.2) including measurements of magnetization, susceptibility, and magnetic relaxation. The Curie temperature was found to decrease with increasing content of Ti. Two distinct magnetic transitions, irreversibility, non-exponential relaxation and aging effects confirm a reentrant spin–glass state for x=0.2. The time decay of the magnetization has an algebraic functional form for times up to 2 h. The specific heat also displays characteristic features of a spin–glass system by a linear low-temperature dependence and a broadened peak near the temperature of the reentrant transition.