Generation and spectroscopic characterization of ruthenacyclobutane and ruthenium olefin carbene intermediates relevant to ring closing metathesis catalysis

The reaction of phosphonium alkylidenes [(H2IMes)RuCl2=CHPR3]+[A]- (R = C6H11, A = OTf or B(C6F5)4, 1-Cy; R = i-C3H7, A = ClB(C6F5)3 or OTf, 1-iPr) with 1 equiv of ethylene at -78 degrees C, in the presence of 2-3 equiv of a trapping olefin substrate, yields intermediates relevant to olefin metathesis catalytic cycles. Dimethyl cyclopent-3-ene-1,1-dicarboxylate gives solutions of a substituted ruthenacyclobutane 3 of relevance to ring closing metathesis catalysis. 1H and 13C NMR data are fully consistent with its assignment as a ruthenacyclobutane, but 1JCC values of 23 Hz for the CalphaH2-Cbeta bond and 8.5 Hz for the CalphaH-Cbeta bond point to an unsymmetrical structure in which the latter bond is more activated than the former. In contrast, trapping with acenaphthylene leads to an olefin carbene complex (6) in which the putative ruthenacyclobutane has opened; this species was also fully characterized by NMR spectroscopy and compared to related species reported previously.     

Approach to the synthesis of dolabelides A and B: fragment synthesis by tandem silylformylation-crotylsilylation

[structure: see text] A synthesis of the C(15)-C(30) fragment of Dolabelides A and B has been achieved. The recently developed asymmetric silane alcoholysis and tandem silylformylation-crotylsilylation reactions were used as the key steps to establish the C(23)-C(27) 1,5-syn-diol. In addition, the flexibility of this methodology has been demonstrated with an efficient synthesis of the C(24)-C(25) trisubstituted olefin.     

Enantioselective synthesis of the C1-C6 and C7-C23 fragments of the proposed structure of iriomoteolide 1a

Synthesis of the C1-C6 and C7-C23 fragments of the proposed structure of iriomoteolide 1a has been accomplished. Key steps include a cross metathesis to form the C15-C16 E olefin and a chelation controlled Grignard addition to form the tertiary alcohol at C14. Notably, 7 of the 9 stereocenters of the proposed structure have been set using various aldol reactions employing metallo enolates of thiazolidinethiones.     

Total synthesis of Carpatamides A–D

A synthetic strategy was developed for the synthesis of the common core structure of Carpatamides A–D. The total synthesis of Carpatamides A and C was completed in 6 steps and of Carpatamides B and D in 7 steps, by employing the Wittig olefination, olefin cross metathesis and acid amine coupling reactions as key steps.     

Metal Olefin Complexes: Revisiting the Dewar−Chatt−Duncanson Model and Deriving Reactivity Patterns from Carbon‐13 NMR Chemical Shift

Metal olefin complexes that are ubiquitous intermediates in catalysis are investigated by a detailed analysis of their ¹³C‐NMR chemical shift tensors. This analysis allows evidencing specific electronic features, namely the olefin‐to‐metal σ‐donation and the metal‐to‐olefin π‐backdonation as proposed in the Dewar?Chatt?Duncanson model. Apart from these interactions, the chemical shift tensor analysis reveals an additional ligand‐to‐metal π‐donation of the olefin σ(C=C) orbital in systems with suitably oriented vacant d‐orbitals. This interaction which is not accounted for in the Dewar?Chatt?Duncanson model explains the reactivity of this type of metal olefin complexes towards oxidative cyclization (olefin insertion) and protonolysis.     

A Density Functional Theory Investigation of the Cobalt-Mediated η(5) -Pentadienyl/Alkyne [5+2] Cycloaddition Reaction: Mechanistic Insight and Substituent Effects

Alkyl-substituted η(5) -pentadienyl half-sandwich complexes of cobalt have been reported to undergo [5+2] cycloaddition reactions with alkynes to provide η(2) ,η(3) -cycloheptadienyl complexes under kinetic control. DFT studies have been used to elucidate the mechanism of the cyclization reaction as well as that of the subsequent isomerization to the final η(5) -cycloheptadienyl product. The initial cyclization is a stepwise process of olefin decoordination/alkyne capture, C?C bond formation, olefin arm capture, and a second C?C bond formation; the initial decoordination/capture step is rate-limiting. Once the η(2) ,η(3) -cycloheptadienyl complex has been formed, isomerization to η(5) -cycloheptadienyl again involves several steps: olefin decoordination, β-hydride elimination, reinsertion, and olefin coordination; also here the initial decoordination step is rate limiting. Substituents strongly affect the ease of reaction. Pentadienyl substituents in the 1- and 5-positions assist pentadienyl opening and hence accelerate the reaction, while substituents at the 3-position have a strongly retarding effect on the same step. Substituents at the alkyne (2-butyne vs. ethyne) result in much faster isomerization due to easier olefin decoordination. Paths involving triplet states do not appear to be competitive.     

Thermal degradation of poly(olefin sulphone)s. Part I—The effect of olefin structure on the yields of volatile products

The rates and mechanisms of the thermal degradation of nine alternating poly(olefin sulphone)s with different olefin structures have been investigated at 150°C and 200°C by a novel technique which is particularly suitable for studying the initial steps of the degradation. Rapid degradation was initiated at the CS bond with depolymerisation to sulphur dioxide and olefin. The rate of thermal degradation showed a moderate correlation with the ceiling temperature for monomer-polymer equilibrium and also with the number of β-hydrogen atoms, but neither parameter provided an adequate measure of the sensitivity of all the poly(olefin sulphone)s to thermal degradation. Substantial isomerisation was observed in the formation of olefin from poly(3-methyl-1-butene sulphone).     

Motuporamines, anti-invasion and anti-angiogenic alkaloids from the marine sponge Xestospongia exigua (Kirkpatrick): isolation, structure elucidation, analogue synthesis, and conformational analysis.

Extracts of the sponge Xestospongia exigua collected in Papua New Guinea were positive in a new assay for anti-invasion activity. Bioassay-guided fractionation led to the identification of the three known motuporamines A (1), B (2), and C (3) along with the new motuporamines D (4), E (5), and F (6) and a mixture of G, H, and I (15). Motuporamines A (1), B (2), and C (3) and the mixture of G, H, and I (15) were responsible for the anti-invasion activity of the crude extract. Motuporamine C (3) has also been found to be anti-angiogenic. A series of analogues of the motuporamines have been synthesized and evaluated for anti-invasive activity. These SAR results revealed that a saturated 15-membered cyclic amine fused to the natural motuporamine diamine side chain (13) represented the optimal structure for anti-invasive activity in this family. Single-crystal X-ray diffraction analysis of one of the analogues 20 showed that in the solid state its 16-membered macrocyclic amine fragment adopted the [4444] quadrangular conformation predicted by calculations to be the lowest energy conformation for the corresponding cycloalkane, cyclohexadecane. These data along with literature X-ray data and conformational analysis for derivatives of azacyclotridecane have been used as precedents for predicting the lowest energy ring conformations of other motuporamines. The SAR data from the natural and synthetic motuporamines have been combined with the conformational analyses to provide an outline of the functionality and shape required for activity in this family of alkaloids and to design a new analogue 49 that showed good anti-invasion activity.     

Direct observation of a 14-electron ruthenacyclobutane relevant to olefin metathesis

The 14-electron ruthenium phosphonium alkylidene complex [(IH2Mes)Cl2Ru=CH(PCy3)][B(C6F5)4], 1b, a highly active olefin metathesis catalyst, reacts with stoichiometric quantities of ethylene at -50 degrees C in CD2Cl2 to generate the ruthenacyclobutane complex [(IH2Mes)Cl2RuCH2CH2CH2], 2, and [CH2=CH(PCy3)][B(C6F5)4] in quantitative yield by NMR spectroscopy. 1H and 13C NMR spectroscopies on 2 and 2-13C3 are consistent with a symmetrical C2v structure, providing the first experimental information concerning this crucial intermediate in ruthenium-mediated olefin metathesis. At -50 degrees C, exchange with free ethylene takes place on the chemical time scale. Complex 2 decomposes in solution upon warming to room temperature, generating propene and unknown ruthenium product(s).     

Structure and separation properties of π‐complex membranes comprising poly(hexamethylenevinylene) and silver tetrafluoroborate

Polymer/silver‐ion π‐complex membranes consisting of poly(hexamethylenevinylene) (PHMV) and silver tetrafluoroborate exhibit unusually high separation performance for olefin/olefin and olefin/paraffin mixtures. The formation of π complexes between silver ions and unsaturated C?C bonds of PHMV has been confirmed with wide‐angle X‐ray scattering, differential scanning calorimetry, and X‐ray photoelectron spectroscopy. Fourier transform infrared and ultraviolet spectroscopy studies have revealed that silver ions make π complexes with olefins such as 1,3‐butadiene, propylene, and ethylene. Of these three olefins, 1,3‐butadiene has the highest binding affinity with silver ions in dissolved in PHMV, and this results in its higher solubility and permeance. Therefore, the π‐complex membranes exhibit unusually high separation performance for olefin/olefin and olefin/paraffin mixtures. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1434–1441, 2006     

Total synthesis of the nonadjacently linked bis-tetrahydrofuran acetogenin bullatanocin (squamostatin C)

The total synthesis of the nonadjacently linked bis-THF acetogenin bullatanocin (squamostatin C) is described. The synthetic strategy is a modular one based on three components, two mono-THF alkenes and a butenolide precursor, and the olefin cross-metathesis and Wittig olefination as the segment-coupling reactions. The synthesis confirms the structure of the natural product, and its convergent design makes it especially attractive for analogue synthesis.     

Olefin substitution in (silox)3M(olefin) (silox = (t)Bu3SiO; M = Nb, Ta): the role of density of states in second vs third row transition metal reactivity

The substitution chemistry of olefin complexes (silox)3M(ole) (silox = (t)Bu3SiO; M = Nb (1-ole), Ta (2-ole); ole = C2H4 (as 13C2H4 or C2D4), C2H3Me, C2H3Et, cis-2-C4H8, iso-C4H8, C2H3Ph, cC5H8, cC6H10, cC7H10 (norbornene)) was investigated. For 1-ole, substitution was dissociative (deltaG(double dagger)(diss)), and in combination with calculated olefin binding free energies (deltaG(o)(bind)), activation free energies for olefin association (deltaG(double dagger)(assoc)) to (silox)3Nb (1) were estimated. For 2-ole, substitution was not observed prior to rearrangement to alkylidenes. Instead, activation free energies for olefin association to (silox)3Ta (2) were measured, and when combined with deltaG(o)(bind) (calcd), estimates of olefin dissociation rates from 2-ole were obtained. Despite stronger binding energies for 1-ole vs 2-ole, the dissociation of olefins from 1-ole is much faster than that from 2-ole. The association of olefins to 1 is also much faster than that to 2. Linear free energy relationships (with respect to deltaG(o)(bind)) characterize olefin dissociation from 1-ole, but not olefin dissociation from 2-ole, and olefin association to 2, but not olefin association to 1. Calculated transition states for olefin dissociation from (HO)3M(C2H4) (M = Nb, 1'-C2H4; Ta, 2'-C2H4) are asymmetric and have orbitals consistent with either singlet or triplet states. The rearrangement of (silox)3Nb(trans-Vy,Ph-cPr) (1-VyPhcPr) to (silox)3Nb=CHCH=CHCH2CH2Ph (3) is consistent with a diradical intermediate akin to the transition state for substitution. The disparity between Nb and Ta in olefin substitution chemistry is rationalized on the basis of a greater density of states (DOS) for the products (i.e., (silox)3M + ole) where M = Nb, leading to intersystem crossing events that facilitate dissociation. At the crux of the DOS difference is the greater 5dz2/6s mixing for Ta vs the 4dz2/5s mixing of Nb. This rationalization is generalized to explain the nominally swifter reactivities of 4d vs 5d elements.     

Co-oligomerization of ethylene and higher linear alpha olefins. II. Olefin reactivities in various reaction steps of co-oligomerization with nickel ylide-based system

Part I described co-oligomerization reactions of ethylene and various linear α-olefins (propylene, 1-butene, 1-hexene, 1-heptene, 1-octene, and 1-decene) in the presence of the homogeneous catalyst consisting of sulfonated nickel ylide and diethylaluminum ethoxide. The present article analyzes olefin reactivities in various reaction steps of the co-oligomerization reactions as well as reactivities of various catalytic species. Chain propagation reactions (insertion into the Ni? C bonds) with participation of α-olefins exhibit poor regioselectivity, primary insertion being ca. 60% more probable than the secondary insertion. Ethylene is significantly more reactive in chain propagation reactions: 50–70 times compared to olefin primary insertion and 100–120 times compared to olefin secondary insertion. Reactivities of α-olefins in chain propagation reactions decrease slightly for higher olefin alkyl groups. Reactivities of Ni? C bonds in chain propagation and chain termination reactions strongly depend on the structure of the alkyl group attached to the nickel atom. The Ni? CHR? CH₂? R bond has very low reactivity in ethylene insertion reaction and usually decomposes in the α-hydrogen elimination process. Kinetic analysis of olefin co-oligomerization reactions provides numerous analogies with olefin copolymerization reactions in the presence of Ziegler–Natta catalysts.     

Demonstration of remote steric differentiation of cis/trans alkene coordination in copper(I) complexes of aryl-substituted bis(2-pyridyl)amine

Complexes of the type [Cu(R-dpa)(η(2)-olefin)]BF(4) (R = Mes and 2-(i)PrC(6)H(4)) for cis- and trans- isomers of 3-octene, as well as those for cis- and trans-4-octene (R = 2-(i)PrC(6)H(4)) have been prepared and characterized by (1)H and (13)C NMR, FTIR, and TGA. The crystal structure of [Cu(Mes-dpa)(η(2)-trans-3-octene)]BF(4) (2) has been determined via X-ray crystallography. The asymmetric unit in the crystal lattice of 2 contains two unique conformations of the complex cation related by a pseudo center of symmetry, which differ primarily in the orientation of the olefin with respect to the rest of the molecule. The (1)H and (13)C NMR spectra of [Cu(Ar-dpa)(η(2)-olefin)]BF(4) exhibit olefin resonances shifted upfield with respect to free olefin. The difference in Δδ((13)C) relative magnitudes between cis- and trans-complexes, i.e., the binding, correlates with the degree of substitution at the amine nitrogen. The identity of the remote ligand substituent (Ar) controls the differentiation of binding between cis and trans isomers as a consequence of increased folding of the Ar-dpa ligand along the Cu···N axis.     

DFT Study of a 5‐endo‐trig‐Type Cyclization of 3‐Alkenoic Acids by Using Pd–Spiro‐bis(isoxazoline) as Catalyst: Importance of the Rigid Spiro Framework for Both Selectivity and Reactivity

The reaction pathway of an enantioselective 5‐endo‐trig‐type cyclization of 3‐alkenoic acids catalyzed by a chiral palladium–spiro‐bis(isoxazoline) complex, Pd–SPRIX, has been studied by density functional theory calculations. The most plausible pathway involves intramolecular nucleophilic attack of the carboxylate moiety on the C?C double bond activated by Pd–SPRIX and β‐H elimination from the resulting organopalladium intermediate. The enantioselectivity was determined in the cyclization step through the formation of a π‐olefin complex, in which one of the two enantiofaces of the olefin moiety was selected. The β‐H elimination occurs via a seven‐membered cyclic structure in which the acetate ligand plays a key role in lowering the activation barrier of the transition state. In the elimination step, the SPRIX ligand was found to behave as a monodentate ligand due to the hemilability of one of the isoxazoline units thereby facilitating the elimination. Natural population analysis of this pathway showed that the more weakly electron‐donating SPRIX ligand, compared with the bis(oxazoline) ligand, BOX, facilitated the formation of the π‐olefin complex intermediate, leading to a smaller overall activation energy and a higher reactivity of the Pd–SPRIX catalyst.     

Alkaline Earth–Olefin Complexes with Secondary Interactions

Strontium and calcium (alkaline earth: Ae) olefin complexes stabilised by secondary Ae???F?C and β‐agostic Ae???H?Si interactions are presented. Olefin coordination onto the alkaline earths is plain in the solid state, and it is thermodynamically favoured over the coordination of THF. The existence of the Ae???olefin interactions is corroborated by solution NMR data and DFT computations. The coordination mode of the olefin varies with steric effects and, if enforced, olefin dissociation can be compensated by the other non‐covalent interactions, as supported by DFT computations.     

烯烃的交叉复分解反应(CM)及其合成应用

概述了近年来烯烃交叉复分解反应的研究进展及其在有机中间体制备、碳水化合物的合成、高分子化学以及工业生产上的应用.     

Catalytic intermolecular allylic C-H alkylation

The first electrophilic Pd(II)-catalyzed allylic C H alkylation is reported, providing a novel method for formation of sp3-sp3 C C bonds directly from C H bonds. A wide range of aromatic and heteroaromatic linear (E)-alpha-nitro-arylpentenoates are obtained as single olefin isomers in excellent yields directly from terminal olefin substrates and methyl nitroacetate. The use of DMSO as a pi-acidic ligand was found to be crucial for promoting functionalization of the pi-allylPd intermediate. Products from this reaction are valuable synthetic intermediates and are readily transformed to amino esters via selective reduction and optically enriched alpha,alpha-disubstituted amino acid precursors via asymmetric conjugate addition.     

Role of coordination geometry in dictating the barrier to hydride migration in d6 square-pyramidal iridium and rhodium pincer complexes

Syntheses of the olefin hydride complexes [(POCOP)M(H)(olefin)][BAr(f)(4)] (6a-M, M = Ir or Rh, olefin = C(2)H(4); 6b-M, M = Ir or Rh, olefin = C(3)H(6); POCOP = 2,6-bis(di-tert-butylphosphinito)benzene; BAr(f) = tetrakis(3,5-trifluoromethylphenyl)borate) are reported. A single-crystal X-ray structure determination of 6b-Ir shows a square-pyramidal coordination geometry for Ir, with the hydride ligand occupying the apical position. Dynamic NMR techniques were used to characterize these complexes. The rates of site exchange between the hydride and the olefinic hydrogens yielded ΔG(++) = 15.6 (6a-Ir), 16.8 (6b-Ir), 12.0 (6a-Rh), and 13.7 (6b-Rh) kcal/mol. The NMR exchange data also established that hydride migration in the propylene complexes yields exclusively the primary alkyl intermediate arising from 1,2-insertion. Unexpectedly, no averaging of the top and bottom faces of the square-pyramidal complexes is observed in the NMR spectra at high temperatures, indicating that the barrier for facial equilibration is >20 kcal/mol for both the Ir and Rh complexes. A DFT computational study was used to characterize the free energy surface for the hydride migration reactions. The classical terminal hydride complexes, [M(POCOP)(olefin)H](+), are calculated to be the global minima for both Rh and Ir, in accord with experimental results. In both the Rh ethylene and propylene complexes, the transition state for hydride migration (TS1) to form the agostic species is higher on the energy surface than the transition state for in-place rotation of the coordinated C-H bond (TS2), while for Ir, TS2 is the high point on the energy surface. Therefore, only for the case of the Rh complexes is the NMR exchange rate a direct measure of the hydride migration barrier. The trends in the experimental barriers as a function of M and olefin are in good agreement with the trends in the calculated exchange barriers. The calculated barriers for the hydride migration reaction in the Rh complexes are ～2 kcal/mol higher than for the Ir complexes, despite the fact that the energy difference between the olefin hydride ground state and the agostic alkyl structure is ～4 kcal/mol larger for Ir than for Rh. This feature, together with the high barrier for interchange of the top and bottom faces of the complexes, is proposed to arise from the unique coordination geometry of the agostic complexes and the strong preference for a cis-divacant octahedral geometry in four-coordinate intermediates.     

烯烃在催化裂化催化剂上反应机理的初步研究

在自制的微反-色谱装置上,进行了单体烯烃和催化裂化汽油在不同条件下的催化裂化反应实验。对单体烯烃的裂化反应规律和汽油中的烯烃在半再生催化剂和待生催化剂上的催化裂化反应规律进行对比分析。结果表明,单体烯烃反应中,C6及C6以下的烯烃主要发生骨架异构和双键异构反应,氢转移和直接裂化反应发生的较少。C7以上的烯烃95%以上发生转化,高温下直接裂化生成C3、C4,氢转移和异构化比率较大。汽油中的烯烃转化主要集中在C7以上,烯烃之间存在一定的交互作用,单体烯烃的催化裂化反应规律可以初步预测汽油中烯烃的转化。催化剂上的结焦类型对汽油中的烯烃的转化方式没有影响。