Light polarization modulation in single-mode optical fibres

A theoretical and experimental study of light polarization modulation in single-mode anisotropic optical fibres is presented. The problem of increasing polarization modulation efficiency in slightly and strongly anisotropic fibres is considered. The requirements to be met by the optical configuration for efficient polarization modulation with both slightly and strongly anisotropic fibres are discussed. The polarization modulation signal is found to be immune to external effects on the fibre under compensated birefringence. An experimental polarization modulation-based fibredyne video transmission data highway is presented.     

Bandwidths of single-mode and multimode optical fibre

An analysis is given of the effect of carrier spectral width on bandwidth of optical fibre transmission lines and a simple generalized expression is deduced relating carrier bandspread and maximum permissible pulse rate. It is shown that for the case of a semiconductor laser carrier source the bandwidth of a multimode fibre can be made to approach that expected from single-mode and graded-index fibres.     

Investigation of bending loss in a single-mode optical fibre

Loss of optical power in a single-mode optical fibre due to bending has been investigated for a wavelength of 1550 nm. In this experiment, the effects of bending radius (4–15 mm, with steps of 1 mm), and wrapping turns (up to 40 turns) on loss have been studied. Twisting the optical fibre and its influence on power loss also have been investigated.     

Practical considerations in determining the installed cost of LAN optical fiber cables

The development and introduction of fiber-optical-based local area networks (LANs) has required system designers and end users to seriously evaluate their cost-effectiveness. The installed optical fiber cable represents a significant part of the system cost. This article reviews current and future costs of the media.     

Practical considerations in determining the installed cost of LAN optical fiber cables

The development and introduction of fiber-optical-based local area networks (LANs) has required system designers and end users to seriously evaluate their cost-effectiveness. The installed optical fiber cable represents a significant part of the system cost. This article reviews current and future costs of the media.     

Analysis of a single-mode optical fibre piezoceramic phase modulator

The behaviour of a cylindrical single-mode optical fibre piezoceramic phase modulator was investigated in the frequency range below resonance. The integral and differential phase modulation efficiencies are reported for different geometrical dimensions of the modulator and for various piezoelectric ceramic materials. p ]The results obtained show that a phase-modulation depth in excess of can be easily achieved using commercially available piezoelectric cylinders, with driving voltage amplitude as low as 5 V.     

Measurement of polarization mode dispersion in single mode fibre

Polarization mode dispersion (PMD) in fibre seriously limits the high-capacity optical fibre communication system. The measurement of PMD was realized by three methods — wavelength scanning method, modified OTDR method and modified York S-38 dispersion meter method. Different types of fibres have been measured using the above three methods and the results have been found to be consistent. Finally, we also found that the measured results of longer non-polarization-maintaining fibre satisfied the Maxwellian probability density function and the results of polarization maintaining fibre were derived. Supported by The National Natural Science Foundations of P. R. China.     

Spectral and temporal study of picosecond-pulse propagation in a single-mode optical fibre

The power-dependent pulsewidth variations for input 85 ps pulses from a cw mode-locked Nd: YAG laser propagating through 125 m of single-mode optical fibre have been examined using a Synchroscan streak camera. Simultaneous spectral and temporal measurements provide information as to the optimum parameters for pulse compression in fibres.     

Mathematical modeling of random coupling between polarization modes in single-mode optical fibers: Integrated statistical properties of polarization modes of single-mode optical fibers in the presence of random inhomogeneities

Using mathematical modeling, an explicit form is found for the Jones matrix of a segment of a single-mode optical fiber with random inhomogeneities, whose length is considerably greater than the correlation length of random inhomogeneities. It is shown that parameters of this matrix are of a statistical nature. A rational representation of the matrix is proposed. It is shown that, under certain conditions, one of the matrix parameters may be treated as constant, whereas the other parameter is assumed to be continuously distributed on the interval [0, 2π]. As the latter parameter is changed, which corresponds to a change from one random realization of inhomogeneities in a single-mode fiber to another, the ellipticity and the azimuth of the major axis of the polarization ellipse of natural polarization modes of a single-mode fiber simultaneously change.     

Applications of optical fibre Bragg gratings sensing technology-based smart stay cables

Stay cable is one of the most critical structural components of a bridge. However, it readily suffers from fatigue damage, corrosion damage, and their coupled effects. Thus, health monitoring of stay cables is important for ensuring the integrity and safety of a bridge. A smart stay cable assembled with optical fibre Bragg grating (OFBG) strain and temperature sensors was proposed in this study. To protect the OFBG sensors against breakage in application, the OFBG sensors were first incorporated into a glass-fibre-reinforced polymer (GFRP) bar (GFRP-OFBG bar) when the bar was fabricated. To fabricate cables assembled with OFBG sensors, several GFRP-OFBG bars were inserted into the hollows of steel wires and fixed with the steel wires together at the anchorages of the cable. Therefore, the GFRP-OFBG bars can consistently deform with the steel wires in a cable and the smart stay cable can sense its own strain and temperature through OFBG sensors. The fabrication procedure of the smart stay cable was developed and the self-sensing property of the smart stay cable was calibrated. Finally, the application of the smart stay cables on the Tianjing Yonghe Bridge was demonstrated. The fatigue accumulative damage of the smart stay cables was evaluated based on field monitoring strain.     

Supercontinuum spectra generation in the single-mode optical fibre with concave dispersion profile

In this paper, a new method is proposed to generate broad supercontinuum (SC) spectra in the single-mode optical fibre with concave dispersion profile. We numerically simulate pulse evolutions and discuss physics mechanism in detail for SC spectrum generation in the optical fibre with concave dispersion profile. Furthermore, general criteria are presented for specifying the shape of SC spectrum by introducing normalized parameters, which are related to the fibres and the initial pump pulses. The results show that the flat and broad SC spectra are indeed generated in our proposed optical fibre.     

Spectral and temporal investigations of nonlinearities in a non-polarization preserving single-mode optical fibre

Intense green and red components generated in a non-polarization preserving optical fibre using a Q-switched and mode-locked cw Nd: YAG laser have been examined spectrally and temporally with picosecond resolution. In addition to the red (four-photon interaction) and green (second-harmonic) components, many other frequency mixing processes were detected. From theoretical considerations, the red component (anti-Stokes) which is generated through parametric four photon mixing should be in the same propagation mode as the Stokes component (ir) and this was confirmed experimentally.     

Propagation of chirped nonlinear pulses in a lossy highly birefringent single-mode optical fibre

A new model of the nonlinear propagation of optical solitons with initial linear frequency chirp through lossy highly birefringent fibres, allowing the improvement of the practical results concerning the distortionless signal transmission in ultrahigh-speed communications, is presented within the framework of a system of coupled nonlinear Schroedinger (CNLS) equations. This model demonstrates the existence of bound chirped solitons in a lossy single-mode highly birefringent fibre.     

Evolution of the polarization state of scattered radiation in a single-mode optical fiber

Moscow Physicotechnical Institute. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 34, No. 5, pp. 603–605, May, 1991.     

单模阶梯光纤中孤立波的弹性形变双折射及偏振色散

本文利用微扰计算综合考虑了弹性形变对孤立波在单模光纤中传输的影响,指出了即使是孤立波也存在着弹性形变双折射和偏振色散。     

Statistics of polarization mode dispersion-induced gain fluctuations in Raman amplified optical transmissions

A systematic experimental evaluation of polarization mode dispersion (PMD) -induced polarization-dependent gain (PDG) in forward pumped Raman amplification in dispersion-shifted and in dispersion-compensating fiber was performed. Good agreement was obtained between the measured statistical parameters and the current analytical model for PDG fluctuation statistics. The probability distribution of the PDG was approximately Maxwellian within the range PMD >0.05 ps/km(1/2). The interplay between PMD and gain fluctuations is discussed; random birefringence strongly reduces PDG fluctuations. However, the trade-off between reduction of the power penalties for PDG and increase of the penalties for PMD distortion precludes the use of PMD instead of source depolarization techniques for reduction of PDG.     

Mathematical modeling of random coupling between polarization modes in single-mode optical fibers: XV. Dependence of integral statistical parameters of polarization modes in single-mode optical fibers with random inhomogeneities on the wavelength of light

Spectral dependences of integral statistical elements of the Jones matrix of an extended segment of a single-mode optical fiber (SMOF) with random inhomogeneities, whose length considerably exceeds the correlation length of random inhomogeneities, are found by the method of mathematical modeling. The boundaries of the ranges of optical wavelengths are determined, within the limits of which the parameters under consideration remain quasi-constant. This allows the derivation of analytical expressions for the degree of polarization of nonmonochromatic radiation in an SMOF and for the zero drift in fiber ring interferometers with the help of the approximate method of small perturbations. It is shown that the small-perturbation method leads to adequate results for SMOFs with strong and intermediate linear birefringence.     

Properties of a polished type single-mode optical fibre coupler with an intermediate planar waveguide

One possible way to prepare a compact optical fibre coupler (OFC) with fixed coupling ratio for applications in different devices and systems is demonstrated. Experimental and theoretical results are presented concerning the properties of the glued OFC for three different thicknesses of the glue layer: < 0.1 m; 0.8 m and 1.6 m. The couplers are compared with respect to their temperature and spectral characteristics.