Affinity chromatography with monolithic capillary columns. II. Polymethacrylate monoliths with immobilized lectins for the separation of glycoconjugates by nano-liquid affinity chromatography

Monolithic capillary columns with surface bound lectin affinity ligands were introduced for performing lectin affinity chromatography (LAC) by nano-liquid chromatography (nano-LC). Two kinds of polymethacrylate monoliths were prepared, namely poly(glycidyl methacrylateco-ethylene dimethacrylate) and poly(glycidyl methacrylate-co-ethylene dimethacrylate-co-[2-(methacryloyloxy)ethyl]trimethyl ammonium chloride) to yield neutral and cationic macroporous polymer, respectively. Two lectins including concanavalin (Con A) and wheat germ agglutinin (WGA) were immobilized onto the monolithic capillary columns. The neutral monoliths with immobilized lectins exhibited lower permeability under pressure driven flow than the cationic monoliths indicating that the latter had wider flow-through pores than the former. Both types of monoliths with immobilized lectins exhibited strong affinity toward particular glycoproteins and their oligosaccharide chains (i.e., glycans) having sugar sequences recognizable by the lectin. Due to the strong binding affinity, the monoliths with surface bound lectins allowed the injection of relatively large volume (i.e., several column volumes) of dilute samples of glycoproteins and glycans thus allowing the concentration of the glycoconjugates and their subsequent isolation and detection at low levels (approximately 10(-8) M). To further exploit the lectin monoliths in the isolation of glycoconjugates, two-dimensional separation schemes involving LAC in the first dimension and reversed-phase nano-LC in the second dimension were introduced. The various interrelated methods established in this investigation are expected to play a major role in advancing the sciences of "nano-glycomics".     

Combined use of lectin affinity chromatography and endo-beta-galactosidase to study polylactosamine sequences isolated from haemopoietic cell surfaces

The trypsin-sensitive glycopeptides from cell surfaces of a multipotential murine haemopoietic cell line (DE) have been studied using serial lectin affinity chromatography on columns of immobilized lentil lectin (LCA), concanavalin A (Con A), and wheat-germ agglutinin (WGA). WGA-binding material consisted of glycopeptides that failed to bind to LCA and Con A. Step elution from the WGA-column with 0.01-, 0.1-, 0.5- and 1.0 M N-acetyl-D-glucosamine yielded four affinity classes of glycopeptide (WGA-W, WGA-I, WGA-S and WGA-SS respectively). WGA-W, WGA-I and WGA-S contained both alkali-stable (N-linked) and alkali-labile (O-linked) carbohydrate on high molecular weight glycopeptides. The WGA-SS fraction contained only N-linked carbohydrate. N-linked glycopeptides isolated from each WGA-binding class differed in molecular size, relative N-acetylneuraminic acid content and affinity for Ricinus communis 120 agglutinin. endo-beta-Galactosidase digestion showed that these glycopeptides contained polylactosamine-type glycans. Gel filtration profiles of the enzyme treated materials were different for each WGA-binding population suggesting variation in branching patterns and/or substitution with fucose residues. Affinity chromatography has shown that the WGA binding molecules are the major glycopeptide group at DE cell surfaces.     

Tandem lectin affinity chromatography monolithic columns with surface immobilised concanavalin A, wheat germ agglutinin and Ricinus communis agglutinin-I for capturing sub-glycoproteomics from breast cancer and disease-free human sera

In this study, a liquid-phase separation platform consisting of tandem lectin affinity chromatography was introduced for the selective capturing of sub-glycoproteomics that are affected in cancers, e.g. breast cancer. The platform is comprised of three monolithic columns with surface immobilised lectins including concanavalin A (Con A), wheat germ agglutinin (WGA) and Ricinus communis agglutinin-I (RCA-I). While WGA and Con A have specificities directed towards the core portion of N-glycans on the glycoprotein surface, RCA-I specifically interacts with the non-reducing terminal moieties of the outer chain structures of N-glycans. The effects of the order in which the three lectin columns were arranged in the tandem columns format were evaluated. The most suitable order proved to be WGA → Con A → RCA-I (denoted as WCR) as far as the number of captured proteins was concerned. The WCR tandem columns allowed the capture of 113 and 112 proteins from disease-free and breast cancer sera, respectively, corresponding to 75 and 65 non-redundant proteins, respectively. Using mass spectral count ratios and Q-Q plots yielded a panel of 23 non-redundant differentially expressed proteins (i.e. a panel of 23 candidate markers), which should in principle be more representative of a pathophysiological state than a single marker candidate.     

Polymethacrylate monolithic columns for capillary liquid chromatography

In recent years, continuous separation media have attracted considerable attention because of the advantages they offer over packed columns. This research resulted in two useful monolithic material types, the first based on modified silica gel and the second on organic polymers. This work attempts to review advances in the development, characterization, and applications of monolithic columns based on synthetic polymers in capillary chromatography, with the main focus on monolithic beds prepared from methacrylate-ester based monomers. The polymerization conditions used in the production of polymethacrylate monolithic capillary columns are surveyed, with attention being paid to the concentrations of monomers, porogen solvents, and polymerization initiators as the system variables used to control the porous and hydrodynamic properties of the monolithic media. The simplicity of their preparation as well as the possibilities of controlling of their porous properties and surface chemistries are the main benefits of the polymer monolithic capillary columns in comparison to capillary columns packed with particulate materials. The application areas considered in this review concern mainly separations in reversed-phase chromatography, ion-exchange chromatography, hydrophobic and hydrophilic interaction modes; enzyme immobilization and sample preparation in the capillary chromatography format are also addressed.     

A simplified synthesis of polymeric nonparticulate stationary phases with macrocyclic antibiotic as chiral selector for capillary electrochromatography

A simplified approach to synthesize nonparticulate (continuous or monolithic) beds with embedded vancomycin chiral selectors for capillary electrochromatography is proposed. In the present approach, N,N'-diallyltartardiamide monomer with diol functionality is used, which can be readily converted to aldehyde groups via periodate treatment. Parallel to the activation of the polymeric matrix for covalent attachment of vancomycin, the periodate treatment has shown secondary effects on the polymeric bed morphology, namely the increase of the average pore size and porosity of the skeleton. Inversed size-exclusion chromatography was applied to characterize porosimetric properties of the capillary columns before and after the periodate treatment. Electroosmotic and enantioselective properties of the nonparticulate beds synthesized are presented. The approach is of more general interest attaching different affinity groups to the polymeric matrix and/or enhancing the accessibility to the active sites, for instance, in the molecular imprinting technique.     

Advances in capillary electrochromatography and micro-high performance liquid chromatography monolithic columns for separation science

Over the last decade, monoliths or continuous beds have emerged as an alternative to traditional packed-bed columns for use in capillary electrochromatography (CEC) and micro-high performance liquid chromatography (micro-HPLC). Monolithic columns can be divided into two categories: silica-based monolithic columns and rigid organic polymer-based monolithic columns resulting from the polymerization of acrylamide, styrene, acrylate or methacrylate monomers. In this paper, the chemistry and most recent applications of these various types of monoliths in both CEC and micro-HPLC are presented.     

Chemiluminescent Detection of Carbohydrates in the Tumoral Breast Diseases

Nowadays, there is an increase of investigations into the fibroadenoma, mainly because some studies have shown that the occurrence of fibroadenoma is linked to an increased risk of developing breast carcinoma. Currently, the chemiluminescence biomarkers are applied for validation methods and screening. Here, a lectin chemiluminescence is proposed as new histochemistry method to identify carbohydrates in mammary tumoral tissues. The lectins concanavalin A (Con A) and peanut agglutinin (PNA) conjugated to acridinium ester were used to characterize the glycocode of breast tissues: normal, fibroadenoma, and invasive duct carcinoma (IDC). The lectin chemiluminescence expressed in relative light units (RLU) was higher in fibroadenoma and IDC than in normal tissue for both lectins tested. The relationship RLU emission versus tissue area described a linear and hyperbolic curve for IDC and fibroadenoma, respectively, using Con A whereas hyperbolic curves for both transformed tissues using PNA. RLU was abolished by inhibiting the interaction between tissues and lectins using their specific carbohydrates: methyl-α-d-mannoside (Con A) and galactose (PNA). The intrinsic fluorescence emission did not change with combination of the lectins (Con A/PNA) to the acridinium ester for hydrophobic residues. These results represent the lectin chemiluminescence as an alternative of histochemistry method for tumoral diagnosis in the breast.     

Affinity monolithic capillary columns for glycomics/proteomics: 1. Polymethacrylate monoliths with immobilized lectins for glycoprotein separation by affinity capillary electrochromatography and affinity nano-liquid chromatography in either a single column or columns coupled in series

In this report, microcolumn separation schemes involving monolithic capillary columns with immobilized lectins, and relevant to nanoglycomics/nanoproteomics were introduced. Positive and neutral monoliths based on poly(glycidyl methacrylate-co-ethylene dimethacrylate) were designed for achieving lectin affinity chromatography (LAC) by nano-LC and CEC. The positive monoliths (i.e., monoliths with cationic sites) afforded relatively high permeability in nano-LC but lack predictable EOF magnitude and direction, while neutral monoliths provided a good compromise between reasonable permeability in nano-LC and predictable EOF in CEC. Lectin affinity nano-LC permitted the enrichment of classes of different glycoproteins having similar N-glycans recognized by the immobilized lectin, whereas lectin affinity CEC provided the simultaneous capturing and separation of different glycoproteins due to differences in charge-to-mass ratio. Also, this investigation demonstrated for the first time the coupling of lectin capillary columns in series (i.e., tandem columns) for enhanced separation of glycoproteins by LAC using the CEC modality. Furthermore, in the coupled columns format, glycoforms of a given glycoprotein were readily separated.     

Permeability, porosity, and structure of monolithic capillary columns in gas chromatography

The permeability of monolithic silica gel capillary columns with respect to the helium carrier gas was studied using gas chromatography. The results obtained by gas chromatography and liquid chromatography were found to be in close agreement. The permeability of monolithic capillary columns was compared to that of hollow capillary columns and columns packed with finely dispersed sorbents. It was demonstrated that the permeability of the monolithic capillary columns studied is almost three orders of magnitude lower than that of hollow capillary columns of the same diameter but two orders of magnitude higher than that of columns packed with micron-scale particles. The interstitial fraction of the monolithic columns was found to be very high, 0.95.     

LECTIN RECEPTORS ON ROD AND CONE MEMBRANES

Abstract— The oligosaccharides of rod and cone membranes were investigated with the aid of fluorescence and ¹²⁵I-labeled lectins. Additionally, the ability of lectins to cause agglutination in rod outer segment (ROS) suspensions was used as an index for the presence of the corresponding lectin receptors. The specificities of lectin-ligand interactions were determined from studies of inhibition by various haptene sugars. The membranes of both rods and cones have receptors for Con A, PNA, RCA-120, RCA-60, SBA and WGA. The affinity of PNA for accessory cones is much higher than for the principal cones. There do not appear to be receptors for UeA and LTA on rods or cones. Additionally, receptors for HPA and DBA were identified on ROS. These results suggest the existence of the following sugar residues:

The binding of Con A and WGA to ROS membrane proteins electrophoresed on SDS-polyacrylamide gels was also investigated. In addition to rhodopsin, these lectins also bind to the 291000-dalton protein, indicating that it is a glycoprotein containing mannose and GlcNAc.     

整体柱离子色谱的研究进展

该文介绍了离子色谱的分类,整体柱的分类、制备及特点,并以此为依据归纳总结了常规整体柱在离子色谱中的应用和毛细管整体柱在毛细管离子色谱中的应用,其中包括硅胶基质整体柱和聚合物基质整体柱,评述并展望了整体柱离子色谱的发展前景.     

蛋白A连续床亲和毛细管色谱柱的制备及性能考察

人免疫球蛋白 G(HIg G)是一种重要的生物大分子 ,是人血浆中的主要成分之一 ,通常采用免疫学的方法测定 .蛋白 A(Protein A)与免疫球蛋白 (HIg G)的 Fc区之间具有很强的特异性亲和作用 ,因而固载蛋白 A的亲和介质可用于免疫球蛋白及单克隆抗体的分离、纯化和分析测定[1～ 3 ] .根据固定相存在形式的不同 ,毛细管色谱柱主要有开管、填充和连续床柱 3种方式 .连续床具有相比高、易制备 (一步合成 )、孔径易控制、不需烧塞子和易改性等优点 .连续床与其它常用的亲和介质 (如球型凝胶颗粒、灌流色谱基质 [4、 5] 、膜介质 [6,7] 等 )相比具…     

Optimization of binary porogen solvent composition for preparation of butyl methacrylate monoliths in capillary liquid chromatography

Butyl methacrylate monolithic columns in 320 microm i.d. fused silica capillaries for reversed-phase capillary liquid chromatography were prepared by radical polymerization initiated thermally with azobisisobutyronitrile (AIBN). Polymerization mixture contained butyl methacrylate (BMA) as the function monomer and ethylene dimethacrylate (EDMA) as the crosslinking agent with 1,4-butanediol and 1-propanol as a binary porogen solvent. Ratio of 1,4-butanediol to 1-propanol in the porogen solvent was optimized regarding the monolithic column efficiency and performance. Total porosity, column permeability, separation impedance, Walters hydrophobicity index, retention factors, peak asymmetry factors, height equivalents to a theoretical plate and peak resolutions were used for characterization of the prepared monolithic columns. The polymerization mixture consisting of 17.8% of BMA, 21.8% of EDMA, 18.0% of 1,4-butanediol, 42.0% of 1-propanol and 0.4% AIBN generated monolithic columns of the best performance having a sufficient permeability and the lowest separation impedance. It was also demonstrated that monolithic columns of this composition exhibited good preparation reproducibility and an excellent pressure resistance when applied in capillary liquid chromatography.     

Octyl-type monolithic columns of 530 microm i.d. for capillary liquid chromatography

A novel monolithic capillary column (530 microm i.d.) was prepared for capillary liquid chromatography (CLC) by in situ copolymerization of octyl methacrylate (MAOE) and ethylene dimethacrylate (EDMA) in the presence of a porogen solvent containing 1-propanol, 1,4-butanediol, and water with azobisisobutyronitrile as the initiator. The influences of the contents of the porogen solvent, EDMA and the various concentration ratios of 1-propanol to 1,4-butanediol in the polymerization mixture on the morphology, porosity, globule size, stability and column efficiency were investigated. The morphology and pore size distribution of monolithic capillary columns were characterized by SEM and mercury intrusion porosimetry, respectively. Chromatographic evaluations of the columns were performed under CLC mode. The results showed that good permeability and stability can be obtained under optimal experimental conditions. The separation results of some acid, neutral and basic analytes demonstrated the hydrophobicity and low affinity to basic analytes of the new column. Three metal ions, i.e. Mg(II), Zn(II) and Cd(II) were also separated under ion-pair mode on the new monolithic capillary column and the results were acceptable.     

Preparation of monolithic columns with target mesopore-size distribution for potential use in size-exclusion chromatography

The main factors affecting the mesopore porosity of methacrylate-ester based monolithic columns were investigated. We prepared 40 monolithic capillary columns with porosity controlled by varying the proportions of butyl methacrylate (BMA) and ethylene dimethacrylate (EDMA) monomers and of 1,4-butanediol (BUT) and 1-propanol (PROP) as the porogen solvent in the polymerisation mixtures by thermally initiated in situ polymerisation in fused-silica capillaries. Using mixture design software, we systematically varied the composition of the polymerisation mixtures to find significant factors affecting mesopore formation. Multivariate analysis of the experimental data obtained for the fabricated columns yielded a model for prediction of the mesopore porosity in monolithic beds as a function of the composition of the polymerisation mixture used to prepare polymethacrylate monolithic capillary columns. The mean absolute deviation of predicted porosities is 0.029 for most of the columns, with only eight columns showing deviations exceeding 0.050. The main factor affecting the mesopore porosity proved to be the combination of the concentration of hydrophobic monomer (BMA) and the concentration of the less-polar solvent, 1-propanol, in the porogen mixture. The proportion of mesopores in the monolithic capillary columns increases with increasing concentration of 1-propanol and with decreasing concentration ratios of the cross-linker (EDMA) to monomer (BMA) and of BUT to PROP porogenic solvents.     

A strategy for screening trypsin inhibitors from traditional Chinese medicine based on a monolithic capillary immobilized enzyme reactor coupled with offline liquid chromatography and mass spectrometry

A novel strategy was successfully developed for screening trypsin inhibitors in traditional Chinese medicines based on monolithic capillary immobilized enzyme reactors combined with liquid chromatography‐tandem mass spectrometry. Organic polymer based monolithic enzyme reactors were firstly prepared by covalently bonding trypsin to a poly(glycidyl methacrylate‐co‐poly (ethylene glycol) diacrylate) monolith by the ring‐opening reaction of epoxy groups. The activity and kinetic parameters of the obtained monolithic trypsin reactors were systematically evaluated using micro‐liquid chromatography. Fourier transform infrared spectroscopy and scanning electron microscopy were also used to characterize the monolithic trypsin reactors. The resulting functional and denatured monolithic trypsin reactors were applied as affinity solid‐phase extraction columns, and offline coupled with a liquid chromatography‐tandem mass spectrometry system to construct a binding affinity screening platform. Subsequently, the proposed platform was applied for screening trypsin binders in a Scutellaria baicalensis Georgi extract. Three compounds, namely scutellarin, baicalin, and wogonoside were identified, and their inhibitory activities were further confirmed via an in vitro enzymatic inhibition assay. Additionally, molecular docking was also performed to study the interactions between trypsin and these three compounds.     

Effect of multi-walled carbon nanotubes incorporation into benzyl methacrylate monolithic columns in capillary liquid chromatography

This work describes the preparation of polymer based monolithic materials and their use as stationary phases in capillary liquid chromatography. Multi-walled carbon nanotubes (MWCNT) were incorporated into a mixture containing benzyl methacrylate (BMA) and ethylene dimethacrylate (EDMA) as co-monomers. The optimized porogenic mixture was a ternary solution composed of cyclohexanol, 1,4-butandiol and butanol which resulted in a stable and homogeneous suspension. Six capillary columns with increasing amounts of MWCNT, from 0 to 0.4 mg mL(-1), were prepared by thermal polymerization in 0.32 mm (i.d.) and 150 mm length fused silica tubing. The chromatographic evaluation showed that the synthesized monolithic beds were mechanically stable while their porosity and permeability increased with the MWCNT content. The prepared capillary columns were tested for the separation of mixtures of ketones and phenols at an optimum flow rate of 2 μL min(-1). The results showed that incorporation of MWCNT slightly affected the retention while it enhanced the column efficiency by increasing the column efficiency by a factor of up to 9. This effect corresponded also to an improved resolution and full separation of the solutes.     

新型有机-无机杂化整体柱的制备及其在毛细管液相色谱及加压毛细管电色谱中的应用

以丙烯酰胺(AM)为单体,八乙烯基倍半硅氧烷(POSS)为交联剂,偶氮二异丁腈(AIBN)为引发剂,四氢呋喃(THF)为致孔剂,通过原位聚合法制备了poly(POSS-co-AM)有机-无机杂化整体柱,并对各反应物的配比进行了优化。结果表明,当功能单体与致孔剂、POSS与AM的质量比均为1.0: 5.0, AIBN的质量分数为0.1%时,杂化整体柱的柱效最高。无机材料的引入使整体柱结构均匀并具有良好的渗透性,该整体柱既能用于亲水色谱模式,也能用于反相色谱模式。将制备的整体柱用于毛细管液相色谱和加压毛细管电色谱分离核苷类、胺类、硝基苯胺类等化合物,获得了良好的效果。     

Design of the monolithic polymers used in capillary electrochromatography columns

Monolithic columns for capillary electrochromatography (CEC) are receiving quite remarkable attention. Both the simplicity of the in situ preparation and the large number of readily available chemistries make the monolithic separation media a vital alternative to capillary columns packed with particulate materials. This review summarizes the current state-of-the-art in this rapidly growing area of CEC with a focus on monolithic capillary columns prepared from synthetic polymers. Recent achievements in column technologies for both high-performance liquid chromatography and capillary electrophoresis are used as the starting point to highlight the influence of these well established analytical methods on the development of monolithic capillary columns for CEC. The effects of individual variables on the separation properties of monolithic capillaries are discussed in detail. The analytical potential of these columns is demonstrated with separations involving various families of compounds in different chromatographic modes.     

Detection of isoforms of recombinant human erythropoietin by various plant lectins after isoelectric focusing

A screening method to determine the binding behavior of lectins toward recombinant human erythropoietin (rHuEPO) was developed. Twenty-three different lectins were tested for this purpose. rHuEPO isoforms were separated by isoelectric focusing using the International Olympic Committee (IOC) and World Anti-Doping Agency (WADA) accredited method for the direct detection of the prohibited doping substance erythropoietin (EPO). For the visualization of the rHuEPO isoforms lectins were used instead of antibodies. Optimization of the screening protocol enabled the detection of a maximum number of rHuEPO isoforms. By means of this protocol information about the binding properties of a lectin toward each individual rHuEPO isoform was accessible. All evaluated lectins showed significant differences in their binding behavior. The most intense response was obtained with WGA, DSL, PHA-E, LEL, PSA, and LCA. While WGA, DSL, PHA-E, and LEL were able to bind all isoforms detected by the standard antibody, LCA and PSA demonstrated a clear preference for rHuEPO isoforms located in the more basic region of the electropherogram. Further lectins tested were ConA, succWGA, PHA-L, RCA, SNA, MAA, STL, ECL, GSL-II, SJA, SBA, UEA-I, Jacalin, PNA, DBA, GSL-I, and VVA. Compared to the lectins mentioned above, they showed reduced sensitivity. Endogenous and recombinant EPO only differ in the composition of their N- and O-glycan moieties. As lectins possess the unique ability to recognize subtle differences in glycan substructures, they represent an interesting approach for their structural characterization. Furthermore, they might be useful for affinity enrichment/purification of rHuEPO in doping control.