Adsorption,coadsorption, and reactivity of sodium and nitric oxide on Ag(111)

The adsorption, desorption, and surface structural properties of Na and NO on Ag(111), together with their coadsorption and surface reactivity, have been studied by LEED, Auger spectroscopy, and thermal desorption. On the clean surface, non-dissociative adsorption of NO into the a-state occurs at 300 K with an initial sticking probability of ~0.1, saturation occurring at a coverage of $\text{~}\text{1}\text{20}$. Desorption occurs reversibly without decomposition and is characterised by a desorption energy of E_d ~ 103 kJ mol^?1. In the coverage regime 0 < θ_Na < 1, sodium adsorbs in registry with the Ag surface mesh and the desorption spectra show a single peak corresponding to E_d ~ 228 kJ mol^?1. For multilayer coverages (1 < θ _Na < 5) a new low temperature peak appears in the desorption spectra with E_d ~ 187 kJ mol^?1. This is identified with Na desorption from an essentially Na surface, and the desorption energy indicates that Na atoms beyond the first chemisorbed layer are significantly influenced by the presence of the Ag substrate. The LEED results show that Na multilayers grow as a (√7 × √7) R19.2° overlayer, and are interpreted in a way which is consistent with the above conclusion. Coadsorption of Na and NO leads to the appearance of a more strongly bound and reactive chemisorbed state of NO (β-NO) with E_d ~ 121 kJ mol^?1. β-NO appears to undego surface dissociation to yield adsorbed O and N atoms whose subsequent reactions lead to the formation of N₂, N₂O, and O₂ as gaseous products. The reactive behaviour of the system is complicated by the effects of Na and O diffusion into the bulk of the specimen, but certain invariant features permit us to postulate an overall reaction mechanism, and the results obtained here are compared with other relevant work.     

Adsorption and surface structural chemistry of Na and Na + O2 on Ag(110)

The adsorption of Na and the coadsorption of Na and O₂ on Ag(110) have been studied by LEED, thermal desorption, and Auger spectroscopy. For Na coverages in the regime 0 < θ_Na < 2 the Na desorption spectra show a single peak (β) corresponding to a desorption energy of ～195 kJ mol^?1, and at θ_Na ～ 2 a (1 × 2) LEED pattern appears. At still higher coverages (2 < θ_Na < 5), a (1 × 3) surface phase is formed, and a new peak (α) appears in the desorption spectra; this is identified with Na desorption from an essentially Na surface. The desorption energy of αNa (～174 kJ mol^?1) indicates that Na adatoms beyond the first chemisorbed layer are significantly influenced by the presence of the Ag substrate. The initial sticking probability of O₂ on Na-dosed Ag(110) is enormously enhanced over the clean surface value, being of the order of unity, and O₂ chemisorption ultimately leads to a (4 × 1) surface structure. The presence either subsurface Na alone, or of both Na and O below the surface, causes substantial changes in surface behaviour. In the former case, submonolayer doses of Na lead to the appearance of a (1 × 2) structure; and in the latter case, Na + O₂ coadsorption results in a c(4 × 2) structure. Auger spectroscopy indicates that the Ag(110)-c(4 × 2)$\text{Na}\text{O}$ phase forms with a constant stoichiometry which is independent of the initial Na dose. The Na:O ratio in this adlayer is believed to be of the order of unity. The structures of the various ordered phases, the nature of the AgNa bonding, and the interatomic spacing between the alkali adatoms on Ag(110) are discussed.     

Electron-stimulated desorption of sodium atoms initiated by their reverse motion

This paper reports on the first measurement of the yield and energy distributions of sodium atoms in electron-stimulated desorption at T = 160 K from sodium layers adsorbed on tungsten with a gold film atop. The Na atom yield has a resonant pattern with an appearance threshold of 30 eV, which can be attributed to exciton excitation in the Na 2p level. The Na yield is associated with the formation of a semiconducting Na _x Au _y film at T ∼ 300 K and sodium and gold coverages in excess of one monolayer. Sodium atoms are desorbed through Auger neutralization of Na²⁺ ions in their reverse motion toward the surface and is limited by the resonant ionization of Na atoms as they pass through the adsorbed layer of Na⁺ ions. The energy distributions of Na atoms are bell shaped with a maximum at about 0.56 eV.     

Atomic O and H exposure of C-covered and oxidized d-metal surfaces

Carbon coverage, oxidation and reduction of Au, Pt, Pd, Rh, Cu, Ru, Ni and Co layers of 1.5 nm thickness on Mo have been characterized with ARPES and desorption spectroscopy upon exposure to thermal H and O radicals. We observe that only part of the carbon species is chemically eroded by atomic H exposure, yielding hydrocarbon desorption. Exposure to atomic O yields complete carbon erosion and CO₂ and H₂O desorption. A dramatic increase in metallic and non-metallic oxide is observed for especially Ni and Co surfaces, while for Au and Cu, the sub-surface Mo layer is much more oxidized. Although volatile oxides exist for some of the d-metals, there is no indication of d-metal erosion. Subsequent atomic H exposure reduces the clean oxides to a metallic state under desorption of H₂O. Due to its adequacy, we propose the atomic oxygen and subsequent atomic hydrogen sequence as a candidate for contamination removal in practical applications like photolithography at 13.5 nm radiation.     

Solvation and chemical reaction of sodium in water clusters

Na_m(H₂O)_n Clusters ( n = 1...200, m = 1...50) are formed in a recently build pick-up arrangement. Preformed water clusters traverse a sodium oven, where sodium atoms are picked up. At low sodium vapour pressure ( < 1×10^-4 mbar) pure Na(H₂O)_n clusters are observed in the mass spectra. At high sodium vapour pressure ( > 1×10^-3 mbar) the water cluster pick up more than 50 Na atoms and reaction products Na(NaOH)_n ( n = 2, 4...50) dominate the mass spectra. The even number of NaOH units in the products indicate that also in a finite cluster the reaction occurs in pairs as in the macroscopic reaction. Received 4 December 2000     

XPS studies of short pulse laser interaction with copper

The effect of laser ablation on copper foil irradiated by a short 30 ns laser pulse was investigated by X-ray photoelectron spectroscopy. The laser fluence was varied from 8 to 16.5 J/cm² and the velocity of the laser beam from 10 to 100 mm/s. This range of laser fluence is characterized by a different intensity of laser ablation. The experiments were done in two kinds of ambient atmosphere: air and argon jet gas.The chemical state and composition of the irradiated copper surface were determined using the modified Auger parameter (α′) and O/Cu intensity ratio. The ablation atmosphere was found to influence the size and chemical state of the copper particles deposited from the vapor plume. During irradiation in air atmosphere the copper nanoparticles react with oxygen and water vapor from the air and are deposited in the form of a CuO and Cu(OH)₂ thin film. In argon atmosphere the processed copper surface is oxidized after exposure to air.     

Adsorption of sodium and its effect upon some electric properties of clean germanium (111) surfaces

The effect of adsorbed Na on the surface conductivity, Δσ, and surface recombination velocity, S, of a clean (114)Ge surface is studied. The surface conductivity is a complicated function of the surface Na concentration, N_Na; at N_Na ≈ 1.5 × 10¹³ atoms/cm², it has a minimum; at ca. (3–5) × 10¹⁴atoms/cm², it has a maximum. For a monolayer coverage (ca. 7.2 × 10¹⁴atoms/cm²) the values of Δσ are not much different from those of a clean Ge surface. The surface recombination velocity is a three-valued function of the surface potential, U_S (calculated from the Δσ values), depending on the Na overlayer coverage and heat treatment of the sample. Three different surface structures (LEED data) were found to correspond to the three S versus U_S curves reported here. Thermal desorption studies show that Na is desorbed in a wide temperature interval. Two peaks have been isolated, studied and discussed. At low coverages a single peak is found to exist, which obeys the first-order desorption kinetics, with a desorption energy of (52 ± 3)kcal/mol. This peak is attributed to the surface defects. For coverages close to$\text{1}\text{4}$ monolayer a new peak was observed in the spectrum. The desorption energy of this binding state exceeds that of all the other states. When the overlayer coverage is increased, this peak is shifted to higher temperatures, as predicted for a half-order desorption kinetics. By comparing also with LEED data, it may be concluded that this most tightly bound sodium has formed on the Ge(111) surface patches of an ordered structure in which one Na atom is bonded to three Ge atoms.     

An XPS and UPS study of the interaction of oxygen with sodium-dosed Ag(110)

The adsorption of Na and the coadsorption of Na and O₂ on Ag(110) have been studied by XPS and UPS. Adsorption of Na results in a rapid decrease in the work function. Δφ reaching a limiting value of ?2.0 eV at θ_Na = 0.5 and thereafter remaining constant. In the coverage range 0 < θ_Na <1 adsorption of O₂ onto the Na dosed surface always results in an increase in the work function to an almost constant value of Δφ ~ ?1 eV. At the same time the XPS data show that the Na/O stoichiometry of the oxygen saturated surface remains essentially constant and independent of the initial Na dose. Calibration experiments using sodium formate as a standard compound indicate that this surface phase has the stoichiometry Na₂O. For θ_Na > 1 there is a sharp change in behaviour; the work function of the oxygen saturated surface begins to decrease rapidly, and eventually falls below the value for the Na covered surface itself at θ_Na ~ 1.5. The XP spectrum now shows the appearance of a new oxygen peak which increases in intensity as θ_Na increases beyond unity. The UP spectra indicate that the binding energy of the surface orbital derived from Na (3s) is increased by ~6.7 eV as compared with the free atom value, and the emission at ~3 eV below E_F, which is associated with surface oxygen is not greatly affected by the presence of Na. These results are discussed against the background of information already available from LEED, Auger, and thermal desorption studies, and we attempt to give a consistent interpretation of the properties of the system at coverages both below and above one monolayer.     

Classical trajectory calculations of the energy distribution of ejected atoms from ion bombarded single crystals

The energy distribution of particles ejected from single crystal surfaces has been calculated using classical dynamics. The model utilizes a microcrystallite of 4 layers with ~60 atoms/layer which is bombarded by 600 eV Ar⁺ at normal incidence. Calculations have been performed for the clean (100) face of copper as well as for copper with oxygen placed in various coverages and site geometries. The energy distributions for Cu, O, Cu₂, CuO and Cu₃ are reported for this system. The distribution for clean Cu exhibits structure which is shown to arise from preferred ejection mechanisms in the crystal. For oxygen adsorbates, the effect of the oxygen binding energy on the peak in the energy distribution of the ejected oxygen atoms is examined by arbitrarily varying the well-depth of the Cu-O pair potential. In general, higher values of the binding energy produce a maximum in the curve at higher energies and also produce a broader energy distribution. The O₂ and Cu₂ dimer distributions are found to peak at approximately the same energy as the O and Cu curves when compared on a kinetic energy/particle basis, although their widths are considerably smaller. Finally, we predict that the CuO energy distribution should be wider than either the Cu₂ or O₂ distributions since it results from the convolution of the Cu and O distributions which are quite different.     

Chemisorption and surface reactivity of nitric oxide on clean and sodium-dosed Ag(110)

The chemisorption of NO on clean and Na-dosed Ag(110) has been studied by LEED, Auger spectroscopy, and thermal desorption. On the clean surface, non-dissociative adsorption into the α-state occurs at 300 K with an initial sticking probability of ～0.1, and the surface is saturated at a coverage of about $\text{1}\text{25}$. Desorption occurs without decomposition, and is characterised by an enthalpy of E_d ～104 kJ mol^?1 — comparable with that for NO desorption from transition metals. Surface defects do not seem to play a significant role in the chemistry of NO on clean Ag, and the presence of surface Na inhibits the adsorption of αNO. However, in the presence of both surface and subsurface Na, both the strength and the extent of NO adsorption are markedly increased and a new state (β₁NO) with E_d ～121 kJ mol^?1 appears. Adsorption into this state occurs with destruction of the Ag(110)-(1 × 2)Na ordered phase. Desorption of β₁NO occurs with significant decomposition, N₂ and N₂O are observed as geseous products, and the system's behaviour towards NO resembles that of a transition metal. Incorporation of subsurface oxygen in addition to subsurface Na increases the desorption enthalpy (β₂NO), maximum coverage, and surface reactivity of NO still further: only about half the adsorbed layer desorbs without decomposition. The bonding of NO to Ag is discussed, and comparisons are made with the properties of α and βNO on Pt(110).     

Paramagnetic defects in gamma-irradiated Na/K-silicate glasses

Gamma-irradiated alkali silicate glasses of the variable composition 22xNa₂O · 22(1 ? x)K₂O · 3CaO · 75SiO₂ have been studied using the electron paramagnetic resonance (EPR) method. It has been established that, upon the successive replacement Na ?? K in the two-alkali silicate glass, the EPR spectrum of hole centers on nonbridging oxygen atoms can be represented as a superposition of signals from the oxygen centers HC ₁(Na), HC ₂(Na), HC ₁(K), and HC ₂(K), which are characteristic of single-alkali silicate systems. The concentration dependences of hole and electron paramagnetic centers do not exhibit specific features that can be interpreted as a manifestation of the ??mixed-alkali effect.?? The results obtained have been discussed taking into account the extended model of centers on nonbridging oxygen atoms.     

The violet emissions produced by laser excitation of Na vapor in the 570–595 nm region

We have observed atomic Na and molecular Na₂ emissions in the violet region when Na vapor in a heatpipe (～10³—10¹⁶ atoms/cm³) is irradiated with a pulsed dye laser with output wavelength in the 570–597 nm region. The Na atomic emissions probably result from recombination of Na⁺ + e^- and energy-pooling involving highly excited atoms and molecules, while the diffuse violet emission bands are probably produced through collisions among excited Na atoms and Na₂ molecules.     

KrF-excimer-laser-induced native oxide removal from Si (100) surfaces studied by Auger electron spectroscopy

The mechanism of KrF-excimer-laser cleaning of Si(100) surfaces was studied by Auger Electron Spectroscopy (AES) and Low-Energy Electron Diffraction (LEED) spectroscopy. The dependence of the cleaning efficiency on the laser fluence was investigated by using a mildly focused laser beam and carefully measuring the energy density distribution of the laser spot impinging on the sample. These values were compared with the AES spectra measured in different points of the irradiated area and with the morphology observed by optical microscopy. Samples as received from the manufacturer were first investigated. It was found that desorption of weakly bonded organic adsorbates occurs at energy densities as low as 0.3 J/cm², whereas significant oxide removal takes place only at an energy density above 0.8 J/cm², which produces damaged surface morphologies. The experimental findings, in agreement with the temperatures calculated for the laser-induced Si heating, indicated that a large fraction of the oxide film is dissolved in the molten silicon, leading to oxygen concentration below the AES detection limit only when the melted depth was of the order of several hundred nanometers. Atomically clean, damage-free Si(100) surfaces were obtained after irradiation of samples pre-etched for 1 min in a HF: H₂O (5%) solution, which had only a thin SiO _x (x < 2) layer and F, C and O containing adsorbed species. Complete contaminant elimination was achieved in this case with 15 pulses at 0.8 J/cm² without any damaging of the surface.     

Adsorption of oxygen on W(110): II. The high coverage range

The structure and composition of the interaction layer between oxygen and a W(110) surface for oxygen coverages θ above 0.5 monolayers is studied with LEED, AES, thermal desorption and work function change measurements. Oxygen is adsorbed by depositing WO₂ followed by annealing. The results are interpreted in terms of a topmost layer consisting only of oxygen atoms followed by the formation of isolated three-dimensional WO₃ crystals after saturation of the two-dimensional oxidation layer at 15 × 10¹⁴ O atoms cm^?2. All available experimental evidence is compatible with this interpretation.     

Excitation of sodium atoms by 330-nm laser pulses

1/2 ) atoms in a dense sodium vapour irradiated by nanosecond laser pulses tuned near the 3S→4P transition was investigated. It was observed that the population of Na(4P) atoms remained high only within the laser pulse, in spite of the relatively long lifetime of the 4P level (110.ns)The 3P_1/2 level, which is populated as a result of cascade transitions from the higher levels, reached the highest population several nanoseconds after the laser shot. The fast population changes are explained by cascade-stimulated transitions between the excited atomic levels. Received: 16 July 1997/Revised version: 27 October 1997     

Laser induced synthesis of nanoparticles in liquids

The review of results on nanoparticles formation is presented under laser ablation of Ag, Au, and Cu-containing solid targets in liquid environments (H₂O, C₂H₅OH, C₂H₄Cl₂, etc.). X-ray diffractometry (XRD), UV-vis optical transmission spectrometry, and high resolution transmission electron microscopy (HRTEM) characterize the nanoparticles. The morphology of nanoparticles is studied as the function of both laser fluence and nature of the liquid. The possibility to control the shape of nanoparticles by ablation of an Au target by an interference pattern of two laser beams is demonstrated. Formation of alloyed Au-Ag and Ag-Cu nanoparticles is reported under laser exposure of a mixture of individual nanoparticles. The effect of internal segregation of brass nanoparticles is discussed due to their small lateral dimensions. The factors are discussed that determine the distribution function of particles size under laser ablation. The influence of laser parameters as well as the nature on the liquid on the properties of nanoparticles is elucidated.     

Ablation process of silica glass induced by laser plasma soft X-ray irradiation

Silica glass can be machined by irradiation with laser plasma soft X-rays on nano- and micrometer scale. We have investigated the ablation process of silica glass induced by laser plasma soft X-ray irradiation. We observed ionic and neutral species emitted from silica surfaces after irradiation. Dominant ions and neutrals are O⁺ and Si⁺ ions and Si, O, SiO and Si₂ neutrals, respectively. The ions have kinetic energies of 13 and 25 eV, which are much higher than those of particles emitted by evaporation. The energy of laser plasma soft X-rays absorbed to silica glass at a fluence of 1.4 J/cm² is estimated to be 380 kJ/cm³, which is higher than the binding energy of SiO₂ of 76 kJ/cm³. These results suggest that the most of the bonds in silica glass are broken by absorption of laser plasma soft X-rays, that several percent of the atoms are ionized, and that neutral atoms are emitted together with repulsive ions. The process possibly enables us to fabricate nano structures.     

Oxidation kinetics of thin titanium films grown on tungsten

Growth of thin Ti films on (100)W and the kinetics of their oxidation are studied using thermal-desorption spectroscopy and Auger electron spectroscopy. Titanium films grow nearly layer by layer on the (100)W face at room temperature. The activation energy for desorption of Ti atoms decreases from 5.2 eV for coverage θ=0.1 to 4.9 eV in a multilayer film. Oxidation of a thin (θ=6) titanium film starts with dissolution of oxygen atoms in its bulk to the limiting concentration for a given temperature, after which the film oxidizes to TiO, with the TiO₂ oxide starting to grow when exposure of the film to oxygen is prolonged. The thermal desorption of oxides follows zero-order kinetics and is characterized by desorption activation energies of 5.1 (TiO) and 5.9 eV (TiO₂).     

An investigation of the effect of pre-dosed O atoms on the adsorption of NO on Pt{2 1 1}

Reflection absorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) have been used to investigate the effect of pre-dosed O atoms on the adsorption of NO on Pt{2 1 1} at room temperature. RAIRS experiments show that no new species are formed when NO is adsorbed onto a Pt{2 1 1} surface that has been pre-dosed with oxygen and no species are lost from the spectra, compared to spectra recorded for NO adsorption on the clean Pt{2 1 1} surface. However pre-dosed oxygen atoms do influence the frequency and intensity of several of the observed infrared bands. In stark contrast, pre-dosed O has a large effect on the TPD spectra. In particular N₂ and N₂O desorption, seen following NO adsorption on the clean Pt{2 1 1} surface, is completely inhibited. This effect has been assigned to the blocking of NO dissociation by the pre-adsorbed O atoms. A new NO desorption peak, not seen for NO adsorption on the clean Pt{2 1 1} surface, is also observed in TPD spectra recorded following NO adsorption on an oxygen pre-dosed Pt{2 1 1} surface.     

Interaction of O2, CO2, CO,C2H4 and C2H4O with Ag(110)

The interaction of O₂, CO₂, CO, C₂H₄ AND C₂H₄O with Ag(110) has been studied by low energy electron diffraction (LEED), temperature programmed desorption (TPD) and electron energy loss spectroscopy (EELS). For adsorbed oxygen the EELS and TPD signals are measured as a function of coverage (θ). Up to θ = 0.25 the EELS signal is proportional to coverage; above 0.25 evidence is found for dipole-dipole interaction as the EELS signal is no longer proportional to coverage. The TPD signal is not directly proportional to the oxygen coverage, which is explained by diffusion of part of the adsorbed oxygen into the bulk. Oxygen has been adsorbed both at pressures of less than 10^-4 Pa in an ultrahigh vacuum chamber and at pressures up to 10³ Pa in a preparation chamber. After desorption at 10³ Pa a new type of weakly bound subsurface oxygen is identified, which can be transferred to the surface by heating the crystal to 470 K. CO₂ is not adsorbed as such on clean silver at 300 K. However, it is adsorbed in the form of a carbonate ion if the surface is first exposed to oxygen. If the crystal is heated this complex decomposes into O_ad and CO₂ with an activation energy of 27 kcal/mol(1 kcal = 4.187 kJ). Up to an oxygen coverage of 0.25 one CO₂ molecule is adsorbed per two oxygen atoms on the surface. At higher oxygen coverages the amount of CO₂ adsorbed becomes smaller. CO readily reacts with O_ad at room temperature to form CO₂. This reaction has been used to measure the number of O atoms present on the surface at 300 K relative to the amount of CO₂ that is adsorbed at 300 K by the formation of a carbonate ion. Weakly bound subsurface oxygen does not react with CO at 300 K. Adsorption of C₂H₄O at 110 K is promoted by the presence of atomic oxygen. The activation energy for desorption of C₂H₄O from clean silver is ～ 9 kcal/mol, whereas on the oxygen-precovered surface two states are found with activation energies of 8.5 and 12.5 kcal/mol. The results are discussed in terms of the mechanism of ethylene epoxidation over unpromoted and unmoderated silver.