Phase formation in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> system

Solid-phase interactions in the V₂O₅-Ta₂O₅-MoO₃ system were studied. The formation of com- pounds TaVO₅ and VTa₉O₂₅ in the V₂O₅-Ta₂O₅ binary system was verified. Tetragonal VTa₉O₂₅-base solid solutions of the general formula Ta_{5 + 4x} V_{5 − 4x} O₂₅ (x = 0.25–1) and TaVO₅-base solid solutions of the general formula Ta _x Mo_{1 − x} V_{2 − x} O_{8 − 3x} (x = 0.625–1) were found to form. Subsolidus phase equilibria in the V₂O₅-Ta₂O₅-MoO₃ were determined.     

Chemical durability of MoO<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> and K<Subscript>2</Subscript>O-MoO<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Thermal and chemical durability studies of the phosphate glasses belonging to the binary MoO₃-P₂O₅ and the ternary K₂O-MoO₃-P₂O₅ systems are reported. The chemical resistant attack tests carried out on the free alkaline MoO₃-P₂O₅ glasses show that the glass associated with the P/Mo ratio 2 has the high chemical durability. It shows also a high glass transition temperature value. The above findings are interpreted in terms of the cross-link density of the glasses and the strength of the M-O bonds (M=P, Mo). The influence of K₂O addition on the properties (density, T _g, durability) of this binary high water resistant glass is studied. It is found that the chemical durability along with the other physical properties are reduced by the incroporation of K₂O in the glass matrix. The results were explained by assuming the formation of non-bridging oxygens and weak bonds. The mechanism of the dissolution of these glasses is proposed.     

An <Emphasis Type="Italic">ab initio </Emphasis> Quantum-Chemical Study of C<Subscript>6</Subscript>H<Subscript>5</Subscript>S(O)CH<Subscript>3</Subscript> and C<Subscript>6</Subscript>H<Subscript>5</Subscript>S(O)CF<Subscript>3</Subscript>

The potential functions of internal rotation around the C -S bond in the C₆H₅S(O)CH₃ and C₆H₅S(O)CF₃ molecules were obtained by ab initio MP2(full)/6-31+G* calculations. The stationary points were identified by solving the vibrational problems. The structures in which the plane of the C -S-C bonds is approximately perpendicular to the benzene ring plane correspond to the energy minimum. The barriers to rotation around the C -S bond, corrected for the zero-point vibration energy, are 21.29 [C₆H₅S(O)CH₃] and 28.98 [C₆H₅S(O)CF₃] kJ mol⁻¹. The bond angles (deg) are as follows: 95.7 (CSC), 107.1 (C SO), 106.3 (C SO) in C₆H₅S(O)CH₃; 93.5 (CSC), 108.2 (C SO), 105.2 (C SO) in C₆H₅S(O)CF₃. The bond lengths are as follows (Å): 1.520 (S=O), 1.804 (C -S), 1.810 (C -S) in C₆H₅S(O)CH₃; 1.507 (S=O), 1.799 (C -S), 1.870 (C -S) in C₆H₅S(O)CF₃. According to the results of NBO calculations, the formally double S=O bond consists of a strongly polarized covalent σ bond (S→O) and an almost ionic bond. An increase in the S=O bond multiplicity relative to a single bond is mainly due to hyperconjugation by the mechanism n(O)→σ*(C -S) and n(O)→σ*(C -S) and, to a lesser extent, by interaction of the oxygen lone electron pairs with the Rydberg orbitals of the S atoms, characterized by a large contribution of the d component.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 1, 2005, pp. 96–104.Original Russian Text Copyright © 2005 by Bzhezovskii, Il’chenko, Chura, Gorb, Yagupol’skii.     

Thermal decomposition of [Cd(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

Thermal decomposition of [Cd(NH₃)₆](NO₃)₂ was studied by thermogravimetry (TG) with simultaneous differential thermal analysis (SDTA) for two samples and at two different sets of measurement parameters. The gaseous products of the decomposition were on-line identified by evolved gas analysis (EGA) with a quadruple mass spectrometer (QMS). The decomposition of the title compound proceeds, for both cases, in the three main stages. In the first stage, deammination of [Cd(NH₃)₆](NO₃)₂ to [Cd(NH₃)](NO₃)₂ undergoes by three steps and 5/6 of all NH₃ molecules are liberated. At second stage the liberation of residual 1/6NH₃ molecules and the formation of Cd(NO₃)₂ undergoes. However, during this process simultaneously a two-step oxidation of a part of ammonia molecules also takes place. In a first step as a result a mixture of ammonia, water vapour and nitrogen is formatted. At the second step, subsequent oxidation of a next part of NH₃ molecules undergoes. As a result, a mixture of nitrogen oxide, nitrogen and water vapour is formatted, what for these both steps clearly indicates the EGA analysis. The third stage of the thermal decomposition is connected with the melting and subsequent decomposition of residual Cd(NO₃)₂ to oxygen, nitrogen dioxide and solid CdO. Additionally, third sample was measured by differential scanning calorimetry (DSC) and the results are fully consistent with those obtained by TG.     

Electrochemical Synthesis of Co-intercalation Compounds in the Graphite-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-H<Subscript>3</Subscript>PO<Subscript>4</Subscript>System

Anodic oxidation of highly oriented pyrolytic graphite in an electrolyte containing concentrated sulfuric and anhydrous phosphoric acids is studied for the first time. The synthesis was carried out under galvanostatic conditions at a current I = 0.5 mA and an elevated temperature (t = 80°C). Intercalation compounds of graphite (ICG) are shown to form at all concentration ratios of H₂SO₄ and H³PO⁴ acids. The intercalation compound of step I forms in solutions containing more than 80 wt % H₂SO₄, a mixture of compounds of intercalation steps I and II forms in 60% H²SO⁴, intercalation step II is realized in the sulfuric acid concentration range from 10 to 40%, and a mixture of compounds of intercalation steps III and II is formed in 5% H₂SO₄ solutions. The threshold concentration of H₂SO₄ intercalation is ∼2%. With the decrease in active intercalate (H₂SO₄) concentration, the charging curves are gradually smoothed, the intercalation step number increases, and the potentials of ICG formation also increase. As the sulfuric acid concentration in the electrolyte changes from 96 to 40 wt %, the filled-layer thickness d _i in ICG monotonously increases from 0.803 to 0.820 nm, which apparently is associated with the greater size of phosphoric acid molecules. With further increase in H₃PO₄ concentration in solution, d _i remains unchanged. According to the results of chemical analysis, both acids are simultaneously incorporated into the graphite interplanar spacing and their ratio in ICG is determined by the electrolyte composition.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 651–655.Original Russian Text Copyright © 2005 by Leshin, Sorokina, Avdeev.     

Oxonitrates VO(NO<Subscript>3</Subscript>)<Subscript>3</Subscript> and MoO<Subscript>2</Subscript>(NO<Subscript>3</Subscript>)<Subscript>2</Subscript> and nitronium and nitrosonium nitratometallates as nitrating agents

Dissolution of vanadium in anhydrous HNO₃ followed by exposure of the solution in a dessicator over P₂O₅ gave liquid vanadyl trinitrate (I). The X-ray diffraction analysis of I was carried out for a single crystal grown on cooling the liquid in a sealed capillary. The structure is composed of VO(NO)₃ molecules in which the V atom has an unusually high C.N. 7; it coordinates the terminal O atom and three bidentate nitrate groups to form a distorted pentagonal bipyramid as the coordination polyhedron with the terminal O atom occupying one axial vertex. Using the GAMESS program package, ab initio calculation of the structure of VO (NO₃)₃ in the liquid phase was carried out. It was shown that in all three physical states, vanadyl trinitrate retains its molecular structure almost invariable. Toluene and naphthalene nitration using I and (NO₂)[Fe(NO₃)₄], NO[Cu(NO₃)₃], (NO)_3/4(NO₂)_1/4[Zr(NO₃)₅], and MoO₂(NO₃)₂ proceeds at high rates at low temperatures to give an unusually high para-nitrotoluene percentage in the products as compared with the ortho-isomer. The activity of the studied compounds in the nitration of naphthalene decreases in the series VO(NO₃)₃ > (NO)_3/4(NO₂)_1/4[Zr(NO₃)₅] > MoO₂(NO₃)₂.     

Composition and structure of solid solutions in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>-V<Stack><Subscript>2</Subscript><Superscript>5+</Superscript></Stack>O<Subscript>5</Subscript> system with the structure sillenite

In the Bi₂O₃-SiO₂-V₂⁵⁺+O₅ system, single crystal solid solutions of the sillenite family of the general composition Bi₂₄(Bi,Si,V)₂O₄₀ are obtained by a hydrothermal method and for the first time characterized by neutron and X-ray diffraction analysis. The tetrahedral position is found to contain vanadium ions with different formal charges (V⁴⁺ and V⁵⁺) responsible for green and orange colors, respectively, of the samples. For the first time, for some sillenites of this system dissymmetrization of the structure (a transition from the I23 space group into P23) is revealed, which is caused by the presence of several atoms in one crystallographic position and also by crystal growth conditions.     

Phase formation in the InPO<Subscript>4</Subscript>-Na<Subscript>3</Subscript>PO<Subscript>4</Subscript>-Li<Subscript>3</Subscript>PO<Subscript>4</Subscript> ternary system

The 950°C isothermal section of the InPO₄-Na₃PO₄-Li₃PO₄ ternary system was studied and constructed; one-, two, and three-phase fields are outlined. Five solid-solution regions exist in the system: solid solutions based on the complex phosphate LiNa₅(PO₄)₂ (olympite structure), the indium ion stabilized high-temperature Na₃PO₄ phase (Na_{3(1 − x)}In _x (PO₄); space group Fm [`3]\bar 3 m), the complex phosphate Na₃In₂(PO₄)₃, and the α and β phases of the compound Li₃In₂(PO₄)₃. A narrow region of melt was found in the vicinity of eutectic equilibria. All the phases detected in the system are derivatives of phases existing in the binary subsystems. Isovalent substitution of lithium for sodium in Na₃In₂(PO₄)₃ leads to a significant increase in the region of a NASICON-like solid solution.     

Phase formation in the V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-MoO<Subscript>3</Subscript> system

The solid-phase interaction in the V₂O₅-Nb₂O₅-MoO₃ system has been investigated, and the formation of a solid solution bounded by the compositions MoNb₂V₄O_{18 ? δ}, Mo₂NbV₅O_{21 ? δ}, Mo₂Nb₃V₃O_{21 ? δ}, and Mo₄Nb₉V₉O_{57 ? δ} has been found (δ is nonstoichiometry). In the V₂O₅?Nb₂O₅ system, the formation of three compounds is verified, namely, VNbO₅ (tetragonal structure), VNb₉O₂₅, and V₂Nb₂₃O_62.5. The first two compounds are isostructural and form a continuous solid solution with tetragonal symmetry. A new compound of the composition Mo₃NbVO_{14 ? δ} has been synthesized. This compound is isostructural to the Mo₃Nb₂O₁₄ compound described in the literature and forms a tetragonal solid solution with it. The phase equilibria in the V₂O₅-Nb₂O₅-MoO₃ system in the subsolidus region have been determined.     

Whitlockite solid solutions in the Ca<Subscript>3</Subscript>(VO<Subscript>4</Subscript>)<Subscript>2</Subscript>-K<Subscript>3</Subscript>VO<Subscript>4</Subscript>-NdVO<Subscript>4</Subscript> system

Phase equilibria in the Ca₃(VO₄)₂-K₃VO₄-NdVO₄ system have been studied. An extensive calcium orthovanadate-based solid solution was found to form with the boundary compositions as follows: Ca₃(VO₄)₂-Ca₉Nd(VO₄)₇-Ca_9.33K_2.33(VO₄)₇-Ca_7.88K_2.63Nd_0.87(VO₄)₇. The unit cell parameters of the whit-lockite vanadates synthesized increase as the potassium and neodymium contents increase. Phase transitions from the low-temperature β phase to the β′ centrosymmetrical structure in Ca_{9.33 − 5z} K_{2.33 + z} Nd_3z (VO₄)₇ vanadates have been studied dilatometrically. The increase in the β ai β′ transition temperature caused by potassium is interpreted as arising from the filling in of vacant cation positions M(4) and M(6).     

Phase diagrams of the KF-K<Subscript>2</Subscript>TaF<Subscript>7</Subscript> and KF-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> systems

The phase diagrams of the systems KF-K₂TaF₇ and KF-Ta₂O₅ were determined using the thermal analysis method. The phase diagrams were described by suitable thermodynamic model. In the system KF-K₂TaF₇ eutectic points at x _KF=0.716 and t=725.4°C and at x _KF=0.214 and t=712.2°C has been calculated. It was suggested that K₂TaF₇ melts incongruently at around 743°C forming two immiscible liquids. The system KF-Ta₂O₅ have been measured up to 8 mol% of Ta₂O₅. The eutectic point was estimated to be at x _KF∼0.9 and t∼816°C. The formation of KTaO₃ and K₃TaO₂F₄ compounds has been observed in the solidified samples.     

Transformations of Perfluorinated 2-Alkyl- and 2,2-Dialkylbenzocyclobutenones in SbF<Subscript>5</Subscript> and SiO<Subscript>2</Subscript>-SbF<Subscript>5</Subscript>

Perfluorinated 2-methyl- and 2-ethylbenzocyclobutenones on heating in SbF₅ underwent isomerization into perfluoroindan-1-one and perfluoro(2-methylindan-1-one), while their reaction with SiO₂—SbF₅ gave perfluorinated 3-methyl- and 3-ethylphthalides, respectively. Perfluorinated 2-ethyl-2-methyl- and 2,2-diethylbenzocyclobutenones reacted with SbF₅ to produce perfluorinated 2-(but-2-en-2-yl)- and 2-(pent-2-en-3-yl)-benzoic acids, and their transformations in SbF₅ over SiO₂ afforded 5,6,7,8-tetrafluoro-1-oxo-3-trifluoromethyl-1H-isochromene-4-carboxylic acid and perfluoro(4-ethyl-3-methyl-1H-isochromen-1-one), respectively.     

Thermal behaviour and properties of Na<Subscript>2</Subscript>O-TiO<Subscript>2</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Differential scanning calorimetry (DSC) and thermomechanical analysis (TMA) were used to study the thermal behaviour of (50-x)Na₂O-xTiO₂-50P₂O₅ and 45Na₂O-yTiO₂-(55-y)P₂O₅ glasses. The addition of TiO₂ to the starting glasses (x=0 and y=5 mol% TiO₂) resulted in a nonlinear increase of glass transition temperature and dilatation softening temperature, whereas the thermal expansion coefficient decreased. All prepared glasses crystallize under heating within the temperature range of 300–610°C. The contribution of the surface crystallization mechanism over the internal one increases with increasing TiO₂ content. With increasing TiO₂ content the temperature of maximum nucleation rate is also gradually shifted from a value close to the glass transition temperature towards the crystallization temperature. X-ray diffraction measurements showed that the major compounds formed by glass crystallization were NaPO₃, TiP₂O₇ and NaTi₂(PO₄)₃. The chemical durability of the glasses without titanium oxide is very poor, but with the replacement of Na₂O or P₂O₅ by TiO₂, it increases sharply.     

Magnetic properties of a dinuclear complex (2,3-Me<Subscript>2</Subscript>C<Subscript>5</Subscript>H<Subscript>3</Subscript>N)<Subscript>2</Subscript>Fe<Subscript>2</Subscript>(μ-OOCCMe<Subscript>3</Subscript>)<Subscript>4</Subscript> with “China lantern” structure

Magnetic characteristics of the dinuclear complex (2,3-Me₂C₅H₃N)₂Fe₂(μ-OOCCMe₃)₄ (1) were studied in the temperature interval 2–300 K. The magnetic behavior of complex 1 was interpreted in terms of the orbital-dependent exchange theory with allowance for the temperature dependence of the populations of the split ⁵T_2g ground-state components of the Fe^II ions. The calculated values of the orbital-dependent exchange parameters are in good agreement with the results reported for dinuclear carboxylates of other 3d-transition metals and suggest the existence of strong ferromagnetism in some types of heterodinuclear carboxylates.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2035–2039, October, 2004.     

H<Subscript>6</Subscript>P<Subscript>2</Subscript>W<Subscript>18</Subscript>O<Subscript>62</Subscript>: A green and reusable catalyst for the synthesis of 3,3-diaryloxindole derivatives in water

An efficient and improved procedure for the synthesis of oxindoles derivatives is developed via the electrophilic substitution reaction of indoles with various isatins in the presence of a Wells–Dawson tungsten heteropolyacid in water. Correspondence: Yaghoub Sarrafi, Department of Chemistry, University of Mazandaran, Babolsar, Iran.     

Synthesis of nonequilibrium Ir<Subscript>x</Subscript>Re<Subscript>1-x</Subscript> solid solutions. Crystal structure of [Ir(NH<Subscript>3</Subscript>)<Subscript>5</Subscript>Cl]<Subscript>2</Subscript>[ReCl<Subscript>6</Subscript>]Cl<Subscript>2</Subscript>

Synthesis of five binary complex salts with an [Ir(NH₃)₅Cl]²⁺ complex cation is described. The counterions are [ReCl₆]^2–, [IrCl₆]^2–, [ReBr₆]^2–, and Cl^–. A polycrystal X-ray diffraction study has been performed for [Ir(NH₃)₅Cl]₂[ReCl₆]Cl₂, and its crystal structure has been determined. A series of Ir _x Re_1–x phases (0.5 x > 1) were obtained by reductive thermolysis. For the Ir-Re system, the history of the V/Z(x) dependence has been refined.Original Russian Text Copyright © 2004 by S. A. Gromilov, S. V. Korenev, I. V. Korolkov, K. V. Yusenko, and I. A. BaidinaTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 508–515, May–June 2004.     

The synthesis and selected properties of Co<Subscript>2</Subscript>InV<Subscript>3</Subscript>O<Subscript>11</Subscript>

It has been demonstrated that Co₂V₂O₇ and InVO₄ react with each other forming a new compound of the Co₂InV₃O₁₁ formula, when their molar ratio is equal to 1:1, or among CoCO₃, In₂O₃ and V₂O₅, mixed at a molar ratio of 4:1:3. This compound melts incongruently at the temperature of 960±5°C, depositing crystals of InVO₄. It crystallizes in the triclinic system and the unit cell parameters amount to: a=0.6524(6) nm, b=0.6885(5) nm, c=1.0290(4) nm, α=96.5°, β=104.1°, γ=100.9°, Z=2. The phase equilibria being established in the Co₂V₂O₇–InVO₄ system over the whole components concentration range up to the solidus line were described.     

Effect of the mechanochemical treatment of a V<Subscript>2</Subscript>O<Subscript>5</Subscript>/MoO<Subscript>3</Subscript> oxide mixture on its properties

The mechanochemical treatment of a V₂O₅/MoO₃ oxide mixture (V/Mo = 70/30 at %) was performed in planetary and vibratory mills under varying treatment times and media. The resulting samples were characterized using XRD analysis, micro-Raman spectroscopy, and XPS; their specific surface areas and catalytic activities in n-butane and benzene oxidation reactions were determined. It was found that the treatment of the oxide mixture in water resulted in chaotic degradation of the parent oxides, a decrease in crystallite sizes, and an increase in the specific surface area at a sufficiently uniform oxide distribution over the sample. The treatment in ethanol was accompanied by an anisotropic deformation of the V₂O₅ crystal by layer sliding in parallel to the vanadyl plane (010) and a chaotic degradation of MoO₃ crystals. This process was accompanied by the partial nonuniform supporting of vanadium oxide crystals onto the surface of molybdenum oxide to increase the V/Mo ratio on the sample surface. In this case, the particle size of oxides decreased and the specific surface areas of samples increased. It was found that the treatment of the oxide mixture in air (dry treatment) resulted in the most significant decrease in the sizes of V₂O₅ and MoO₃ crystals and a growth in the specific surface area. The amorphization of the parent oxides and the formation of MoV₂O₈ were observed as the treatment time was increased; in this case, an excess of amorphous vanadium oxide was supported onto the surface of this compound. It was found that, in all types of mechanochemical treatment, the binding energies of the core electrons of vanadium and molybdenum remained almost unchanged to indicate the constancy of the oxidation states of these elements. Mechanochemical treatment resulted in an increase in the activity of the samples in n-butane and benzene oxidation reactions and in an increase in the selectivity of maleic anhydride formation. In this case, an increase in the specific catalytic activity of the samples correlated with a decrease in the crystallite size of vanadium oxide, whereas selectivity correlated with an increase in the relative concentration of the V₂O₅ plane (010). In these reactions, samples after dry treatment exhibited a maximum activity, which can be related to the formation of MoV₂O₈.     

Structure of Zn<Subscript>3</Subscript>P<Subscript>2</Subscript>

The structure of Z_n3P₂ (P 4₂/nmc, a = b = 8. 0785 Å, c = 11. 3966 Å) was solved and refined to R = 3. 2% in a precision X-ray diffraction experiment (λ-MoK _a, graphite monochromator on a primary beam, 27,496 reflections) . Interatomic distances and bond angles have been determined. The fcc lattice of the structure is built from phosphorus atoms, and the zinc atoms occupy 3/4 of all tetrahedral voids; the structure is described by two equivalent models where 1/4 occupied (by zinc atoms) and 1/4 vacant voids change places. The zinc atoms that occupy the voids following the diamond principle do not change places.Original Russian Text Copyright © 2004 by I. E. Zanin, K. B. Aleinikova, M. M. Afanasiev, and M. Yu. Antipin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 889–892, September–October, 2004.     

LaRhAl,La<Subscript>3</Subscript>Rh<Subscript>3</Subscript>Al<Subscript>4</Subscript>, and Ce<Subscript>5</Subscript>Rh<Subscript>5</Subscript>Al<Subscript>6</Subscript> as a new family of ternary aluminides

The structures of three aluminides of similar composition are determined via X-ray diffraction. The structures consist of coordination polyhedra built of rhodium atoms that form alternating layers extending perpendicular to the short cell parameter. Compound Ce₅Rh₅Al₆ is built of fragments of the structures of LaRhAl and La₃Rh₃Al₄ in a ratio of 1: 1.