Palladium-catalyzed direct ortho C-H arylation of 2-arylpyridine derivatives with aryltrimethoxysilane

A Pd(OAc)(2)-catalyzed cross-coupling reaction between 2-arylpyridine and aryltrimethoxysilane in the presence of AgF and BQ in 1,4-dioxane was studied. After various reaction parameters (catalyst, oxidant, additive, solvent and reaction temperature) were examined, the optimal conditions for the reaction were identified. The synthesis is compatible to aryltrimethoxysilane with both electron-withdrawing and electron-donating groups on the aryl moiety with moderate yields. The kinetic isotope effect (k(H)/k(D)) for the C-H bond activation was provided.     

Synergic effect of two metal centers in catalytic hydrolysis of methionine-containing peptides promoted by dinuclear palladium(II) hexaazacyclooctadecane complex

The species obtained by the reaction of [Pd2([18]aneN6)Cl2](ClO4)2(where [18]aneN6 is 1,4,7,10,13,16-hexaazacyclooctadecane) with AgBF4 have been determined by electrospray ionization mass spectrometry (ESI-MS) to be an equilibrium mixture of three major types of dinuclear Pd(II) complex cations, [Pd2(mu-O)([18]aneN6)]2+, [Pd2(mu-OH)([18]aneN6)]3+ and [Pd2(H2O)(OH)([18]aneN6)](3+), in aqueous solution. The hydroxo-group-bridged one, [Pd2(mu-OH)([18]aneN6)]3+, is a dominant species, whose crystal structure has been obtained. The crystal structure of [Pd2(mu-OH)([18]aneN6)](ClO4)3 shows that each Pd(II) ion in the dinuclear complex is tetra-coordinated by three nitrogen atoms and one hydroxo group bridge in a distorted square configuration. The two Pd(II) ions are 3.09 A apart from each other. The dinuclear Pd(II) complex cations [Pd2(mu-OH)([18]aneN6)]3+ and [Pd2(H2O)(OH)([18]aneN6)]3+ can efficiently catalyze hydrolysis of the amide bond involving the carbonyl group of methionine in methionine-containing peptides with turnover number of larger than 20. In these hydrolytic reactions, the two Pd(II) ions are synergic; one Pd(II) ion anchors to the side chain of methionine and the other one delivers hydroxo group or aqua ligand to carbonyl carbon of methionine, or acts as a Lewis acid to activate the carbonyl group of methionine, resulting in cleavage of Met-X bond. The binding constant of dinuclear Pd(II) complex cations with AcMet-Gly and AcMet were determined by 1H NMR titration to be 282 +/- 2 M(-1) and 366 +/- 4 M(-1), respectively. The relatively low binding constants enable the catalytic cycle and the possible catalytic mechanism is proposed. This is the first artificial mimic of metallopeptidases with two metal active centers.     

Study of the Transient Reactive Pd(IV) Intermediate in the Pd(OAc)2‐Catalyzed Oxidative Coupling Reaction System by Electrospray Ionization Tandem Mass Spectrometry

Pd‐catalyzed oxidative coupling reaction was of great importance in the aromatic C? H activation and the formation of new C? O and C? C bonds. Sanford has pioneered practical, directed C? H activation reactions employing Pd(OAc)₂ as catalyst since 2004. However, until now, the speculated reactive Pd(IV) transient intermediates in these reactions have not been isolated or directly detected from reaction solution. Electrospray ionization tandem mass spectrometry (ESI‐MS/MS) was used to intercept and characterize the reactive Pd(IV) transient intermediates in the solutions of Pd(OAc)₂‐catalyzed oxidative coupling reactions. In this study, the Pd(IV) transient intermediates were detected from the solution of Pd(OAc)₂‐catalyzed oxidative coupling reactions by ESI‐MS and the MS/MS of the intercepted Pd(IV) transient intermediate in reaction system was the same with the synthesized authentic Pd(IV) complex. Our ESI‐MS(/MS) studies confirmed the presence of Pd(IV) reaction transient intermediates. Most interestingly, the MS/MS of Pd(IV) transient intermediates showed the reductive elimination reactivity to Pd(II) complexes with new C? O bond formation into product in gas phase, which was consistent with the proposed reactivity of the Pd(IV) transient intermediates in solution.     

Pd(OAc)2-catalyzed oxidative coupling reaction of benzenes with olefins in the presence of molybdovanadophosphoric acid under atmospheric dioxygen and air

The direct oxidative coupling reaction of benzenes with alkenes bearing an electron-withdrawing group was successfully achieved by the use of Pd(OAc)(2)/molybdovanadophosphoric acid (HPMoV) as the key catalyst under O(2) or air atmosphere. Thus, the reaction of benzene with ethyl acrylate under air (1 atm) assisted by Pd(OAc)(2)/HPMoV afforded ethyl cinnamate as a major product in satisfactory yield (74%). This catalytic system could be extended to the coupling reactions between various substituted benzenes and alkenes through the direct aromatic C-H bond activation. In the reaction of benzene with ethyl acrylate under O(2) (1 atm), the best turn-over number (TON) of Pd(OAc)(2) reached was 121. This reaction provides a green route to cinnamate derivatives, which are important precursors of a variety of pharmaceuticals.     

Mechanistic studies on direct arylation of pyridine N-oxide: evidence for cooperative catalysis between two distinct palladium centers

Direct arylations of pyridine N-oxide (PyO), a convenient method to prepare 2-arylpyridines, catalyzed by Pd(OAc)(2) and PtBu(3) have been proposed to occur by the generation of a PtBu(3)-ligated arylpalladium acetate complex, (PtBu(3))Pd(Ar)(OAc) (1), and the reaction of this complex with PyO. We provide strong evidence that 1 does not react directly with PyO. Instead, our data imply that the cyclometalated complex [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2), which is generated from the decomposition of 1, reacts with PyO and serves as a catalyst for the reaction of PyO with 1. The reaction of PyO with 1 occurs with an induction period, and the reaction of 1 with excess PyO in the presence of [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2) is zeroth-order in 1. Moreover, the rates of reactions of PyO with bromobenzene catalyzed by [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2) and [Pd(PtBu(3))(2)] depend on the concentration of [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2) but not on the concentration of [Pd(PtBu(3))(2)]. Finally, the reaction of 1 with a model heteroarylpalladium complex containing a cyclometalated phosphine, [(PEt(3))Pd(2-benzothienyl)(tBu(2)PCMe(2)CH(2))], rapidly formed the arylated heterocycle. Together, these data imply that the rate-determining C-H bond cleavage occurs between PyO and the cyclometalated [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2) rather than between PyO and 1. In this case, the resulting heteroarylpalladium complex transfers the heteroaryl group to 1, and C-C bond-formation occurs from (PtBu(3))Pd(Ar)(2-pyridyl oxide). This mechanism proposed for the direct arylation of PyO constitutes an example of C-H bond functionalization in which C-H activation occurs at one metal center and the activated moiety undergoes functionalization after transfer to a second metal center.     

Selective C-C coupling of Ir-ethene and Ir-carbenoid radicals

The reactivity of the paramagnetic iridium(II) complex [Ir(II)(ethene)(Me(3)tpa)](2+) (1) (Me(3)tpa=N,N,N-tris(6-methyl-2-pyridylmethyl) amine) towards the diazo compounds ethyl diazoacetate (EDA) and trimethylsilyldiazomethane (TMSDM) was investigated. The reaction with EDA gave rise to selective C--C bond formation, most likely through radical coupling of the Ir-carbenoid radical species [Ir(III){CH(.)(COOEt)}(MeCN)(Me(3)tpa)](2+) (7) and (the MeCN adduct of) 1, to give the tetracationic dinuclear complex [(MeCN)(Me(3)tpa)Ir(III){CH(COOEt)CH(2)CH(2)}Ir(III)(MeCN)(Me(3)tpa)](2+) (4). The analogous reaction with TMSDM leads to the mononuclear dicationic species [Ir(III){CH(2)(SiMe(3))}(MeCN)(Me(3)tpa)](2+) (11). This reaction probably involves a hydrogen-atom abstraction from TMSDM by the intermediate Ir-carbenoid radical species [Ir(III){CH(.)(SiMe(3))}(MeCN)(Me(3)tpa)](2+) (10). DFT calculations support pathways proceeding via these Ir-carbenoid radicals. The carbenoid-radical species are actually carbon-centered ligand radicals, with an electronic structure best described as one-electron-reduced Fischer-type carbenes. To our knowledge, this paper represents the first reactivity study of a mononuclear Ir(II) species towards diazo compounds.     

A sulfoxide-promoted, catalytic method for the regioselective synthesis of allylic acetates from monosubstituted olefins via C-H oxidation

Sulfoxide ligation to Pd(II) salts is shown to selectively promote C-H oxidation versus Wacker oxidation chemistry and to control the regioselectivity in the C-H oxidation products. A catalytic method for the direct C-H oxidation of monosubstituted olefins to linear (E)-allylic acetates in high regio- and stereoselectivities and preparatively useful yields is described. The method using benzoquinone as the stoichiometric oxidant and 10 mol % of Pd(OAc)2 or Pd(O2CCF3)2 as the catalyst in a DMSO/AcOH (1:1) solution was found to be compatible with a wide range of functionality (e.g., amides, carbamates, esters, and ethers, see Table 2). Addition of DMSO was found to be critical for promoting the C-H oxidation pathway, with AcOH alone or in combination with a diverse range of dielectric media, leading to mixtures favoring Wacker-type oxidation products (Tables 1, S3). To explore the role of DMSO as a ligand, the bis-sulfoxide Pd(OAc)2 complex 1 was formed and found to be an effective C-H oxidation catalyst in the absence of DMSO (eqs 2, 3). Moreover, catalyst 1 effects a reversal of regioselectivity, favoring the formation of branched allylic acetates.     

Stoichiometric reactions of methylparathion with a palladium aryl oxime metallacycle

The reaction of [Pd(3)(OAc)(6)] with (E)-acetophenone oxime and pyridine in CHCl(3) under reflux affords the metallacycle [Pd(OAc)[C,N-(C(6)H(4)C(CH(3))=NOH)-2](py)] (1) as a yellow air-stable complex. The same reaction carried out at room temperature in the absence of pyridine affords the trinuclear oximato complex [Pd(mu-(E)-ON=C(CH(3))Ph)(mu-OAc)](3) (2), which can be converted into 1 upon heating in the presence of pyridine. As indicated by (1)H and (31)P NMR spectroscopy, complex 1 reacts with methylparathion in acetone-d(6)-D(2)O solutions to afford [Pd(SP(=O)(OCH(3))(2))[C,N-(C(6)H(4)C(CH(3))=NOH)-2](py)] (3) and [Pd(mu-SP(=O)(OCH(3))(2))[C,N-(C(6)H(4)C(CH(3))=NOH)-2]](2) (4) as well as free p-nitrophenol. Compounds 1-4 have been characterized by single-crystal X-ray analysis, NMR and EA. Compounds 1 and 3 are mononuclear complexes with the acetate and dimethylthiophosphate ligand, respectively, trans from the phenyl group. Compound 2 is a trinuclear complex whose structure can be derived from that of [Pd(3)(OAc)(6)] by replacing three of the acetate ligands on one side of Pd(3) plane by three N,O-coordinated oximate ligands. Complex 4 is a dinuclear complex in which the two square-planar palladium moieties are linked by the sulfur atoms of the bridging dimethylthiophosphate ligands.     

Eilatin as a bridging ligand in ruthenium(II) complexes: synthesis,crystal structures,absorption spectra,and electrochemical properties

The potential of the heptacyclic aromatic alkaloid eilatin (1), that features two nonequivalent binding sites, to serve as a bridging ligand is reported. The nonequivalency of the binding sites allowed the selective synthesis of both mono- and dinuclear complexes. The mononuclear Ru(II) complexes [Ru(dmbpy)(2)(eilatin)](2+) (2) and [Ru(tmbpy)(2)(eilatin)](2+) (3) in which eilatin selectively binds "head-on" were synthesized and employed as building blocks in the synthesis of the dinuclear complexes [[Ru(dmbpy)(2)](2)(mu-eilatin)](4+) (4) and [[Ru(tmbpy)(2)](2)(mu-eilatin)](4+) (5). Complete structure elucidation of the complexes in solution was accomplished by 1D and 2D NMR techniques. The X-ray structures of the mononuclear complex 3 and of the two dinuclear complexes 4 and 5 were solved, and absorption spectra and electrochemical properties of the complexes were explored. Both dinuclear complexes formed as racemic mixtures in a 3:1 diastereoisomeric ratio, the major isomer being the heterochiral one (Delta Lambda/Lambda Delta) as revealed by crystallography. The mononuclear complexes feature an exceptionally low energy MLCT band around 600 nm that shifted to over 700 nm upon the binding of the second Ru(II) center. The mononuclear complexes show one reversible oxidation and several reversible reduction waves, the first two reductions being substantially anodically shifted in comparison with [Ru(bpy)(3)](2+), attributed to the reduction of eilatin, and consistent with its low lying pi* orbital. The dinuclear complexes follow the same reduction trend, exhibiting several reversible reduction waves, and two reversible well-resolved metal centered oxidations due to the nonequivalent binding sites and to a significant metal-metal interaction mediated by the bridging eilatin.     

Interaction of palladium(II) and platinum(II) complexes with microperoxidase-11 studied by electrospray mass spectrometry and MS/MS analysis

Interactions of cis-[Pd(en)(H(2)O)(2)](2+) (en, ethylenediamine) and cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) with microperoxidase-11 (MP-11) in a molar ratio of 1:1 or 2:1 at pH 1.4 were investigated via electrospray mass spectrometry and MS/MS analysis at room temperature and at 40 degrees C with an incubation time of 2 or 3 days. The composition of the Pd(II)- and Pt(II)-anchored MP-11 was confirmed on the basis of the precise molecular mass and the simulated isotope distribution pattern. MS/MS analysis revealed that the Pd(II) center anchored to the side chain of Cys7 as Pd(II) and MP-11 were mixed in an equimolar ratio and to side chains of Cys7 and Cys4 as Pd(II) and MP-11 mixed in a 2:1 molar ratio. When Pt(II) and MP-11 were mixed in a 2:1 molar ratio, Pt(II) first anchored to the side chain of Cys7, and then to the side chain of Cys4 with time. The initial coordination of Pd(II) and Pt(II) to the side chain of Cys7 is the essential step for the Pd(II)- and Pt(II)-promoted cleavage of the His8-Thr9 bond in MP-11. These results support the hypothesis that the Pd(II)-mediated cleavage of the His18-Thr19 bond in cytochorome c is due to the identical binding mode.     

Palladium-catalyzed alkylation of aryl C-H bonds with sp3 organotin reagents using benzoquinone as a crucial promoter

The combination of directed C-H activation, batch-wise addition of tetraalkyltin reagents, and rate enhancement by benzoquinone and microwave irradiation provides a promising strategy for the direct coupling of C-H bonds with organometallic reagents. A variety of tetraalkyltins were coupled to C-H bonds to give the alkylated products in good yields by using 5 mol % Pd(OAc)2 as the catalyst. Benzoquinone was shown to be essential for the C-H activation when substrates containing non-pi-conjugated chelating groups are used. Monitoring the formation and reductive elimination of the Pd(Ar)(Me)L2 complex also revealed that benzoquinone promotes the reductive elimination step. Microwave irradiation enhances the reaction rate drastically. The versatility of this protocol was demonstrated by using substrates containing either oxazoline or pyridine as directing groups.     

Theoretical analysis of the mechanism of palladium(II) acetate-catalyzed oxidative Heck coupling of electron-deficient arenes with alkenes: effects of the pyridine-type ancillary ligand and origins of the meta-regioselectivity

A systematic theoretical study is carried out on the mechanism for Pd(II)-catalyzed oxidative cross-coupling between electron-deficient arenes and alkenes. Two types of reaction pathways involving either a sequence of initial arene C-H activation followed by alkene activation, or the reverse sequence of initial alkene C-H activation followed by arene activation are evaluated. Several types of C-H activation mechanisms are discussed including oxidative addition, σ-bond metathesis, concerted metalation/deprotonation, and Heck-type alkene insertion. It is proposed that the most favored reaction pathway should involve an initial concerted metalation/deprotonation step for arene C-H activation by (L)Pd(OAc)(2) (L denotes pyridine type ancillary ligand) to generate a (L)(HOAc)Pd(II)-aryl intermediate, followed by substitution of the ancillary pyridine ligand by alkene substrate and direct insertion of alkene double bond into Pd(II)-aryl bond. The rate- and regio-determining step of the catalytic cycle is concerted metalation/deprotonation of arene C-H bond featuring a six-membered ring transition state. Other mechanism alternatives possess much higher activation barriers, and thus are kinetically less competitive. Possible competing homocoupling pathways have also been shown to be kinetically unfavorable. On the basis of the proposed reaction pathway, the regioselectivity predicted for a number of monosubstituted benzenes is in excellent agreement with experimental observations, thus, lending further support for our proposed mechanism. Additionally, the origins of the regioselectivity of C-H bond activation is elucidated to be caused by a major steric repulsion effect of the ancillary pyridine type ligand with ligands on palladium center and a minor electronic effect of the preinstalled substituent on the benzene ring on the cleaving C-H bond. This would finally lead to the formation of a mixture of meta and para C-H activation products with meta products dominating while no ortho products were detected. Finally, the multiple roles of the ancillary pyridine type ligand have been discussed. These insights are valuable for our understanding and further development of more efficient and selective transition metal-catalyzed oxidative C-H/C-H coupling reactions.     

Pd(II) complexes with mixed benzothiazolin-2-ylidene and phosphine ligands and their catalytic activities toward C-C coupling reactions

Novel Pd(II) mixed N,S-heterocyclic carbene (NSHC)-phosphine complexes of the general formula [PdBr(2)(NSHC)(PR(3))] were obtained from bridge cleavage of dinuclear NSHC complexes of type [PdBr(2)(NSHC)](2) [NSHC = 3-benzylbenzothiazolin-2-ylidene and 3-propylbenzothiazolin-2-ylidene] with triphenylphosphine, tricyclohexylphosphine and 2-diphenylphosphanyl-pyridine. All complexes have been fully characterized by (1)H and (13)C NMR spectroscopy, ESI mass spectrometry and elemental analysis. The X-ray crystal structures of complexes 3-8 are reported. The complexes exhibit moderate to good catalytic activity in the Suzuki-Miyaura coupling reaction of aryl bromides and chlorides.     

Coordination properties of 2,5-dimesitylpyridine: an encumbering and versatile ligand for transition-metal chemistry

To overcome the unfavorable steric pressures associated with 2,6-disubstitution in encumbering pyridine ligands, the coordination chemistry of a 2,5-disubstituted variant, namely, 2,5-dimesitylpyridine (2,5-Mes(2)py), is reported. This diaryl pyridine shows good binding ability to a range of transition-metal fragments with varying formal oxidation states and coligands. Treatment of 2.0 equiv of 2,5-Mes(2)py with monovalent Cu and Ag triflate sources generates complexes of the type [M(2,5-Mes(2)py)(2)]OTf (M = Cu, Ag; OTf = OSO(2)CF(3)), which feature long M-OTf distances and a substrate-accessible primary coordination sphere. Combination of 2,5-Mes(2)py with Cu(OTf)(2) and Pd(OAc)(2) produces four-coordinate complexes featuring cis- and trans-2,5-Mes(2)py orientations, respectively. The four-coordinate palladium complex Pd(OAc)(2)(2,5-Mes(2)py)(2) is found to resist py-ligand dissociation at room temperature in solution, but functions as a precatalyst for the aerobic C-H bond olefination of benzene at elevated temperatures. This C-H bond activation chemistry is compared with a similar Pd-based system featuring 2,6-disubstituted pyridines. 2,5-Mes(2)py also readily supports mono- and dinuclear divalent Co complexes, and the solution-phase equilibria between such species are detailed. The coordination studies presented highlight the potential of 2,5-Mes(2)py to function as an encumbering ancillary for the stabilization of low-coordinate complexes and as a supporting ligand for metal-mediated transformations.     

Assessment of the intermediacy of arylpalladium carboxylate complexes in the direct arylation of benzene: evidence for C-H bond cleavage by "ligandless" species

Palladium-catalyzed direct arylations of benzene have been proposed to occur by the generation of a phosphine-ligated arylpalladium pivalate complex LPd(Ar)(OPiv) and reaction of this complex with benzene. We have isolated an example of the proposed intermediate and evaluated whether this complex does react with benzene to form the biaryl products of direct arylation. In contrast to the proposed mechanism, no biaryl product was formed from cleavage of the benzene C-H bond by LPd(Ar)(OPiv). However, reactions of LPd(Ar)(OPiv) with benzene and additives that displace or consume the phosphine ligand formed the arylated products in good yield, suggesting that a "ligandless" arylpalladium(II) carboxylate complex undergoes the C-H cleavage step. Consistent with this conclusion, we found that reactions catalyzed by Pd(OAc)(2) without a ligand occur faster than, and with comparable selectivities to, reactions catalyzed by Pd(OAc)(2) and a phosphine ligand.     

Charge-tagged acetate ligands as mass spectrometry probes for metal complexes investigations: applications in Suzuki and Heck phosphine-free reactions

An acetate anion bearing an imidazolium cation as its charge tag was reacted with M(OAc)(2) complexes (where M = Ni, Cu, and Pd; in situ reaction) to form members of a new class of charge-tagged metal complexes. The formation of these unprecedented precatalysts with potential for cross-coupling reactions was confirmed by electrospray ionization (and tandem) mass spectrometry. The catalytic performance of the palladium complex was tested in Heck and Suzuki cross-coupling reactions, often with superior activity and yields as compared with Pd(OAc)(2).     

Hydrolysis of a basic bismuth nitrate--formation and stability of novel bismuth oxido clusters

The synthesis of the nanoscaled bismuth oxido clusters [Bi(38)O(45)(NO(3))(20)(DMSO)(28)](NO(3))(4)·4DMSO (1a) and [Bi(38)O(45)(OH)(2)(pTsO)(8)(NO(3))(12)(DMSO)(24)](NO(3))(2)·4DMSO·2H(2)O (2) starting from the basic bismuth nitrate [Bi(6)O(4)(OH)(4)](NO(3))(6)·H(2)O is reported herein. Single-crystal X-ray diffraction analysis, ESI mass spectrometry, thermogravimetric analysis, and molecular dynamics simulation were used to study the formation, structure, and stability of these large metal oxido clusters. Compounds 1a and 2 are based on a [Bi(38)O(45)](24+) core, which is structurally related to δ-Bi(2)O(3). Examination of the fragmentation pathways of 1a and 2 by infrared multi-photon dissociation (IRMPD) tandem MS experiments allows the identification of novel bismuth oxido cluster species in the gas phase.     

Orthopalladation of iminophosphoranes: synthesis, structure and study of stability

The reaction of Pd(OAc)(2) with polyfunctional iminophosphoranes Ph(3)P=NCH(2)CO(2)Me (1a), Ph(3)P=NCH(2)C(O)NMe(2) (1b), Ph(3)P=NCH(2)CH(2)SMe (1c) and Ph(3)P=NCH(2)-2-NC(5)H(4) (1d), gives the orthopalladated dinuclear complex [Pd(mu-Cl){C(6)H(4)(PPh(2)=NCH(2)CO(2)Me-kappa-C,N)-2}](2) (2a) and the mononuclear derivatives [PdCl{C(6)H(4)(PPh(2)=NCH(2)CONMe(2)-kappa-C,N,O)-2}] (2b), [PdCl{C(6)H(4)(PPh(2)=NCH(2)CH(2)SMe-kappa-C,N,S)-2}] (2c) and [PdCl{C(6)H(4)(PPh(2)=NCH(2)-2-NC(5)H(4)-kappa-C,N,N)-2}] (2d). The reaction implies the activation of a C-H bond in a phenyl ring of the phosphonium group, this fact being worthy of note due to the strongly deactivating nature of the phosphonium unit. The palladacycle containing the metallated carbon atom is remarkably stable toward the coordination of incoming ligands, while that formed by the iminic N atom and another heteroatom (O, 2a and 2b; S, 2c; N, 2d) is less stable and the resulting complexes can be considered as hemilabile. The X-ray crystal structures of the cyclopalladated [Pd(mu-Cl){C(6)H(4)(PPh(2)=NCH(2)CO(2)Me-kappa-C,N)-2}](2) (2a), [PdCl{C(6)H(4)(PPh(2)=NCH(2)-2-NC(5)H(4)-kappa-C,N,N)-2}] (2d), [Pd{C(6)H(4)(PPh(2)=NCH(2)CONMe(2)-kappa-C,N,O)-2}(NCMe)](ClO(4)) (7b) and [Pd{C(6)H(4)(PPh(2)NCH(2)CONMe(2)-kappa-C,N,O)-2}(py)](ClO(4)) (3b), and the coordination compound cis-[Pd(Cl)(2)(Ph(3)P=NCH(2)CH(2)SMe-kappa-N,S)] (8) are also reported.     

Binuclear manganese compounds of potential biological significance. Part 2. Mechanistic study of hydrogen peroxide disproportionation by dimanganese complexes: the two oxygen atoms of the peroxide end up in a dioxo intermediate

The dimanganese(II,II) complexes 1a [Mn(2)(L)(OAc)(2)(CH(3)OH)](ClO(4)) and 1b [Mn(2)(L)(OBz)(2)(H(2)O)](ClO(4)), where HL is the unsymmetrical phenol ligand 2-(bis-(2-pyridylmethyl)aminomethyl)-6-((2-pyridylmethyl)(benzyl)aminomethyl)-4-methylphenol, react with hydrogen peroxide in acetonitrile solution. The disproportionation reaction was monitored by electrospray ionization mass spectrometry (ESI-MS) and EPR and UV-visible spectroscopies. Extensive EPR studies have shown that a species (2) exhibiting a 16-line spectrum at g approximately 2 persists during catalysis. ESI-MS experiments conducted similarly during catalysis associate 2a with a peak at 729 (791 for 2b) corresponding to the formula [Mn(III)Mn(IV)(L)(O)(2)(OAc)](+) ([Mn(III)Mn(IV)(L)(O)(2)(OBz)](+) for 2b). At the end of the reaction, it is partly replaced by a species (3) possessing a broad unfeatured signal at g approximately 2. ESI-MS associates 3a with a peak at 713 (775 for 3b) corresponding to the formula [Mn(II)Mn(III)(L)(O)(OAc)](+) ([Mn(II)Mn(III)(L)(O)(OBz)](+) for 3b). In the presence of H(2)(18)O, these two peaks move to 733 and to 715 indicating the presence of two and one oxo ligands, respectively. When H(2)(18)O(2) is used, 2a and 3a are labeled showing that the oxo ligands come from H(2)O(2). Interestingly, when an equimolar mixture of H(2)O(2) and H(2)(18)O(2) is used, only unlabeled and doubly labeled 2a/b are formed, showing that its two oxo ligands come from the same H(2)O(2) molecule. All these experiments lead to attribute the formula [Mn(III)Mn(IV)(L)(O)(2)(OAc)](+) to 2a and to 3a the formula [Mn(II)Mn(III)(L)(O)(OAc)](+). Freeze-quench/EPR experiments revealed that 2a appears at 500 ms and that another species with a 6-line spectrum is formed transiently at ca. 100 ms. 2a was prepared by reaction of 1a with tert-butyl hydroperoxide as shown by EPR and UV-visible spectroscopies and ESI-MS experiments. Its structure was studied by X-ray absorption experiments which revealed the presence of two or three O atoms at 1.87 A and three or two N/O atoms at 2.14 A. In addition one N atom was found at a longer distance (2.3 A) and one Mn at 2.63 A. 2a can be one-electron oxidized at E(1/2) = 0.91 V(NHE) (DeltaE(1/2) = 0.08 V) leading to its Mn(IV)Mn(IV) analogue. The formation of 2a from 1a was monitored by UV-visible and X-ray absorption spectroscopies. Both concur to show that an intermediate Mn(II)Mn(III) species, resembling 4a [Mn(2)(L)(OAc)(2)(H(2)O)](ClO(4))(2), the one-electron-oxidized form of 1a, is formed initially and transforms into 2a. The structures of the active intermediates 2 and 3 are discussed in light of their spectroscopic properties, and potential mechanisms are considered and discussed in the context of the biological reaction.     

Oxidative dinuclear addition of a PdI-PdI moiety to arenes: generation of μ-η3:η3-arene-Pd(II)2 species

We report the oxidative dinuclear addition of a Pd(I)-Pd(I) bond to arenes. The oxidative dinuclear addition products, which have a bi-π-allyl-type arene dipalladium(II) structure, were obtained from [2.2]paracyclophane, anthracene, tetracene, and pentacene. A systematic study of the reaction of [Pd(2)(CH(3)CN)(6)][BF(4)](2) with benzene and polyacenes showed that the larger polyacenes, tetracene and pentacene, afforded the oxidative dinuclear addition products, while benzene, naphthalene, and anthracene gave the π-sandwich Pd(I)-Pd(I) complexes.