Axisymmetric vibrations of polar orthotropic mindlin annular plates of variable thickness

Analysis and numerical results are presented for the axisymmetric vibrations of polar orthotropic annular plates with linear variation in thickness, according to Mindlin's shear theory of plates. A chebyshev collocation technique has been employed to obtain the frequency equations for the transverse motion of such plates, for three different boundary conditions. Frequencies, mode shapes and moments for the first three modes of vibration have been computed for different plate parameters. A comparison of frequencies with the corresponding values obtained by classical plate theory leads to some interesting conclusions.     

Transverse vibrations of a non-uniform rectangular plate on an elastic foundation

Free transverse vibrations of an isotropic rectangular plate of variable thickness resting on an elastic foundation has been studied on the basis of classical plate theory. The fourth-order differential equation governing the motion is solved by using the quintic spline interpolation technique. Characteristic equations for plates of exponentially varying thickness have been obtained for three combinations of boundary conditions at the edges. Frequencies, mode shapes and moments have been computed for different values of the taper constant and the foundation moduli for the first three modes of vibration.     

Axisymmetric vibrations of an isotropic elastic non-homogeneous circular plate of linearly varying thickness

Free axisymmetric vibrations of an isotropic, elastic, non-homogeneous circular plate of linearly varying thickness have been studied on the classical theory of plates. The non-homogeneity of the material of the plate is assumed to arise due to the variation of Young's modulus and density with the radius vector whereas Poisson's ratio is assumed to remain constant. The governing differential equation of motion is solved by the method of Frobenius. The transverse displacement of the plate has been expressed as a power series in terms of the radial co-ordinate. The frequency parameters corresponding to the first two modes of vibration have been computed for different values of the non-homogeneity parameter and taper constant and for clamped and simply supported edge conditions of the plate. A comparison between the numerical results for homogeneous and non-homogeneous material of the plate is also made.     

Magneto-elastic dynamics and bifurcation of rotating annular plate

In this paper, magneto-elastic dynamic behavior, bifurcation, and chaos of a rotating annular thin plate with various boundary conditions are investigated. Based on the thin plate theory and the Maxwell equations, the magneto-elastic dynamic equations of rotating annular plate are derived by means of Hamilton's principle. Bessel function as a mode shape function and the Galerkin method are used to achieve the transverse vibration differential equation of the rotating annular plate with different boundary conditions. By numerical analysis, the bifurcation diagrams with magnetic induction, amplitude and frequency of transverse excitation force as the control parameters are respectively plotted under different boundary conditions such as clamped supported sides, simply supported sides, and clamped-one-side combined with simply-anotherside. Poincare′ maps, time history charts, power spectrum charts, and phase diagrams are obtained under certain conditions,and the influence of the bifurcation parameters on the bifurcation and chaos of the system is discussed. The results show that the motion of the system is a complicated and repeated process from multi-periodic motion to quasi-period motion to chaotic motion, which is accompanied by intermittent chaos, when the bifurcation parameters change. If the amplitude of transverse excitation force is bigger or magnetic induction intensity is smaller or boundary constraints level is lower, the system can be more prone to chaos.     

含周期性空腔结构吸声机理的研究

为了研究水下含周期性空腔结构的吸声机理,建立并验证了含轴对称空腔周期性结构吸声特性计算的简化有限元仿真方法,用简化的有限元模型结合遗传算法对水下环境含周期性圆柱空腔结构的吸声性能进行了优化设计.从能量耗散、变形和模态的角度分析了含周期性空腔结构的吸声机理.空腔结构谐振包括表层的弯曲振动和空腔附近的径向变形,且径向运动也...     

Vibration and damping analysis of multilayered rectangular plates with constrained viscoelastic layers

Governing equations of motion for vibrations of a general multilayered plate consisting of an arbitrary number of alternate stiff and soft layers of orthotropic materials are derived by using variational principles. Extension, bending and in-plane shear deformations in stiff layers and only transverse shear deformations in soft layers are considered as in conventional sandwich structural analysis. In addition to transverse inertia, longitudinal translatory and rotary inertias are included, as such analysis gives higher order modes of vibration and leads to accurate results for relatively thick plates. Vibration and damping analysis of rectangular simply supported plates consisting of alternate elastic and viscoelastic layers is carried out by taking a series solution and applying the correspondence principle of linear viscoelasticity. The damping effectiveness, in term of the system loss factor, for all families of modes for three-, five- and seven-layered plates is evaluated and its variations with geometrical and material property parameters are investigated.     

Vibrations of non-uniform rectangular plates: A spline technique method of solution

The fourth order differential equation governing the transverse motion of an elastic rectangular plate of variable thickness has been solved, by using the quintic spline interpolation technique. An algorithm for computing the solution of this differential equation is presented, for the case of equal intervals. Frequencies, mode shapes and moments for doubly symmetric, antisymmetric-symmetric and second symmetric-symmetric modes of vibration are presented for various cases of boundary conditions.     

Sound radiation from shear deformable stiffened laminated plates

Sound radiation from shear deformable stiffened laminated plates is studied theoretically. The equations of motion for the composite laminated plate are derived on the basis of the first-order shear deformation plate theory. Two sets of parallel stiffeners interact with the laminated plate only through the normal line forces. By using the Fourier wavenumber transform and the stationary phase method, the far-field sound pressure is described analytically. Sound pressure given by the first-order shear deformation plate theory and the classical thin plate theory is compared, and the differences of sound pressure are shown in the high frequency range for an isotropic plate. Sound pressure and the transverse displacement spectra are presented to illustrate the effects of force location, stiffeners and angle-ply layers. Sound radiation from symmetric and antisymmetric composite plates with multiple loadings is also investigated.     

Analytical study of an active piezoelectric absorber on vibration attenuation of a plate

The attenuation of the transverse vibration of a plate, subjected to a harmonic force, is studied. This goal can be achieved by using an active dynamic absorber. The active absorber is made of a pair of piezoelectric sheets, attached to both sides of the plate, and closed electric circuits. One piece of the piezoelectric material provides a sensor for detecting the motion of the plate. Another piece serves as an active dynamic absorber. The equations of motion of the composite plate, including the plate and the piezoelectric material, and the circuit equations of the sensor and the absorber are derived. The displacements of the plate and the currents in the circuits are calculated. The active absorber can successfully attenuate the vibration. The numerical results show that the proposed active absorber can offer more reduction than that using a passive absorber while the absorber is designed to suppress the resonance of a particular vibration mode. Moreover, the active absorber can also reduce the displacements corresponding to other uncontrolled modes. The effects of altering various parameters of the active absorber are studied and discussed.     

转移矩阵法在负折射率介质材料平板波导中的应用研究

利用严格电磁理论,推导出了适用于负折射率介质材料光波导的转移矩阵,分析讨论了转移矩阵的性质和应用.利用转移矩阵方法,推导出导波层为负折射率介质材料、覆盖层和衬底为右手材料的三层对称介质光波导的本征色散方程.用图解法研究了负折射率介质波导中TE波的异常色散特性.在负折射材料介质波导中没有零阶模,最低阶为1阶模,并且有截止频率,只有波导参量满足一定条件的时候才会存在,导模的横向波数可以为实数和纯虚数,而正折射率介质波导导模的横向波数只能为实数.     

Surface plasmon–polariton modes of metallic single-walled carbon nanotubes

Propagation of surface plasmon–polariton modes in metallic single-walled carbon nanotubes is investigated within the framework of the classical electrodynamics. Electronic excitations on the nanotube's surface are modeled by an infinitesimally thin layer of free-electron gas which is described by means of the linearized hydrodynamic theory. General expression of surface modes dispersion is obtained by solving Maxwell and hydrodynamic equations with appropriate boundary conditions. It is shown that the system generally disallows the separation of the transverse electric (TE) modes and transverse magnetic (TM) modes, except for the case of modes with no angular dependence.     

横向磁场中大挠度金属薄板的混沌振动

利用Karman关于板的大挠度理论,考虑涡电流在板中引起的Lorentz力,导出了在横向磁场和横向载荷共同作用下薄板的非线性运动方程.借助Bubnov-Galerkin法将非线性偏微分方程转化为含三次非线性项的常微分方程.在定性分析的基础上,利用次谐轨道的Melnikov函数给出了发生Smale马蹄型混沌运动的阈值条件,进而数值计算了系统的分岔图、相应的相图、Poincaré映射和时程曲线,给出了混沌运动的数字特征.分析结果表明:磁感应强度和外载荷都会影响系统的振动特性. 关键词： 金属薄板 大挠度 横向磁场 混沌振动     

Axisymmetric vibrations of a circular plate of linearly varying thickness on an elastic foundation according to Mindlin theory

Free axisymmetric vibrations of an elastic circular plate of linearly varying thickness on an elastic foundation have been studied on the basis of shear theory [1,2]. The transverse displacement and local rotation are expressed as an infinite series. The frequencies corresponding to the first two modes of vibrations are obtained for a circular plate with clamped and simply supported edge conditions for various values of the taper constant and the foundation modulus. The results have been compared with those of reference [3].     

Non-diffuseness of vibration fields in ribbed plates

This paper presents numerical simulations of structural intensity in a rib-reinforced plate, investigating the diffuseness. Many prediction models of building and structural acoustics, such as statistical energy analysis or energy flow methods, assume the vibrational wave fields to be diffuse. However, the diffuseness assumption is not always valid. One such example is a rib-reinforced plate typically found in a lightweight floor with wooden joists. Other examples can be found in aircraft and ship structures. The structural intensity of a ribbed plate is computed at low to mid frequencies using the Fourier sine expansion of the transverse displacement of the plate. Hamilton's principle is used in combination with thin plate theory and Euler beam theory. The model takes into account interactions between components. The Fourier sine modes are re-formulated as plane waves in a radial coordinate system, which can express the structural intensity in terms of the angular component of the modes. In the simulations, ensemble averages and rain-on-the-roof excitations are used. The numerical results show that the structural intensity varies significantly as the angle of propagation changes and cannot be assumed to form a diffuse field.     

An exact frequency analysis of annular plates with small core having elastically restrained outer edge and sliding inner edge

The present study deals with an exact analysis of free transverse vibrations of annular plates having small core and sliding inner edge and the outer edge being elastically restrained based on classical plate theory. This study focuses mainly on the influence of variations in the elastic restraint parameters on the fundamental frequencies of plate vibration. The natural frequencies for the first six modes of annular plate vibrations are computed for different materials and varying values of the radius parameter and these natural frequencies may correspond to either axisymmetric and/or non-axisymmetric modes of plate vibration. The extensive data of values of fundamental frequency parameter presented in this paper is believed to be of use in the design of acoustic underwater transducers, ocean and naval structures, compressor and pump elements, offshore platforms. These results may serve as bench mark values for researchers to validate their results obtained using approximate numerical methods.     

管板式大功率横流CO2激光横模测量及数值模拟

为了提高激光稳定性和激光加工质量,实验测量了大功率横流CO2激光横模,并理论分析了横模形成机理。针对大功率横流CO2激光器管板式电极结构,由麦克斯韦方程给出电场的横向分布,并通过数值计算得到了激光强度的横向分布。实验结果与数值模拟得到的激光能量分布基本一致。结果表明,在给定放电电压条件下,电极结构和气体流动速率决定了激光横模峰值大小,激光峰值的横向位置取决于气体流动的速率。     

Prediction and measurement of nonpropagating Lamb modes at the free end of a plate when the fundamental antisymmetric mode A0 is incident

Reflection of Lamb waves when the fundamental mode A0 is incident at the free end of a plate is studied, in order to identify the extent to which the generation of nonpropagating modes influences the field local to the end of the plate. Semi-analytical predictions, finite element simulations, and experimental measurements are presented for frequencies below the A2 cutoff. First it is shown, for frequencies below the A1 cutoff, that reflection of the A0 mode is accompanied by a delay in phase, and that there is significant additional motion due to nonpropagating modes within about five plate thicknesses of the end. The extend of this additional motion in the vicinity of the end of the plate is demonstrated by subtracting the contribution of the propagating modes from the displacement field. The wave field at frequencies above the A1 cutoff is more complex because the A1 as well as the A0 propagating modes are present at the end of the plate. Nevertheless, it has still been possible, using semi-analytical predictions and finite element simulations, to demonstrate the additional motion due to the nonpropagating modes.     

Brillouin scattering study of multilayer cobalt-niobium films

Spin waves which are characteristic of periodic structures of thin ferromagnetic Co films alternating with nonmagnetic Nb films have been investigated by means of Brillouin light scattering. The dependence of the magnon frequencies on the magnetic inplane field and on the wave-vector was measured for several samples with different numbers and thicknesses of the layers. The experimental data are in good agreement with a theory of magnetostatic surface spin waves in such media elaborated by Grünberg and Mika. The amplitudes of the transverse magnetization in the different layers of the stack have been calculated. The highest frequency branch resembles the Damon-Eshbach surface magnon. With decreasing frequency the branches acquire volume mode character. In addition, a number of phonon branches has been observed which are interpreted as plate modes of the combined Co-Nb layer on the Si substrate.     

Second quantization in a waveguide with variable cross section

The motion of a system consisting of noninteracting bosons in a waveguide with variable cross section is studied. These particles have transverse as well as longitudinal degrees of freedom, but only a finite number of transverse modes can propagate in the waveguide. While for a waveguide with constant cross section, the numbers of particles in a given state of longitudinal and transverse modes remain constant, in the case of a waveguide with variable cross section there is conversion between these modes, although the total number of particles is conserved. By considering the equations of motion for the annihilation (or creation) operator, it is shown that the boundaries act as an external force, and thus generate localized transverse modes in the waveguide.     

Flexural and transversal wave motion in homogeneous isotropic thermoelastic plates by using asymptotic method

The present investigation is concerned with the flexural and transversal wave motion in an infinite, transversely isotropic, thermoelastic plate by asymptotic method. The governing equations for the flexural and transversal motions have been derived from the system of three-dimensional dynamical equations of linear theory of coupled thermoelasticity. The asymptotic operator plate model for free vibrations; both flexural and transversal, in a homogenous thermoelastic plate leads to fifth degree and cubic polynomial secular equations, respectively, that governs frequency and phase velocity of various possible modes of wave propagation at all wavelengths. All the coefficients of differential operator have been expressed as explicit functions of the material parameters. The velocity dispersion equations for the flexural and transversal wave motion have been deduced from the three-dimensional analog of Rayleigh-Lamb frequency equation for thermoelastic plate waves. The approximations for long and short waves and expression for group velocity have also been derived. The thermoelastic Rayleigh-Lamb frequency equations for the considered plate are expanded in power series in order to obtain polynomial frequency and velocity dispersion relations whose equivalence is established with that of asymptotic method. The dispersion curves for phase velocity, group velocity and attenuation coefficient of various flexural and transversal wave modes are shown graphically for aluminum-epoxy material elastic and thermoelastic plates.