共查询到20条相似文献,搜索用时 31 毫秒
1.
Visualization of the non-steady state oblique detonation wave phenomena around hypersonic spherical projectile 总被引:3,自引:0,他引:3
Shinichi Maeda Ryuichi Inada Jiro Kasahara Akiko Matsuo 《Proceedings of the Combustion Institute》2011,33(2):2343-2349
We studied experimentally the shock waves and combustion waves generated by a hypersonic spherical projectile in an explosive mixture. An acetylene/oxygen mixture diluted with argon (2C2H2 + 5O2 + 7Ar) was used with various initial pressures (detonation cell sizes) to observe optically with a shadowgraph imaging system a shock-induced combustion (SIC), a stable oblique detonation wave (ODW), and a wave called a Straw Hat type consisting of a strong SIC and ODW. The criticality of stabilizing an ODW around a projectile is expressed by the ratio of the projectile diameter, d, to the cell size, λ, as d/λ = 3.63–4.84. Although the Straw Hat type wave in the vicinity of criticality is an unstable phenomena, it has been mainly observed by a single frame picture to date, so that it is difficult to discuss the time history of its wave structure. In this study, it was remarkable to directly carry out continuous optical observations using a high speed video camera which can continuously film 100 pictures with a 1 μs frame speed so as to allow an investigation of the sustaining mechanism of the unstable wave structure. Our results allowed the identification of an increase in unsteadiness in the relative distance between the projectile fronts and the transition points to an ODW as the time increased. They also showed local explosions in the SIC region near transition point transformed the ODW front upstream. 相似文献
2.
凝聚炸药爆轰在边界高声速材料约束下传播时,爆轰波会在约束材料界面上产生复杂的折射现象.本文针对凝聚炸药爆轰波在高声速材料界面上的折射现象展开理论和数值模拟分析.首先通过建立在爆轰ZND模型上的改进爆轰波极曲线理论给出爆轰波折射类型,然后发展一种求解爆轰反应流动方程的基于特征理论的二阶单元中心型Lagrange计算方法来数值模拟典型的爆轰波折射过程.从改进爆轰波极曲线理论和二阶Lagrange方法数值模拟给出的结果看出,凝聚炸药爆轰波在高声速材料界面上的折射类型有四种:反射冲击波的正规折射、带束缚前驱波的非正规折射、带双Mach反射的非正规折射、带λ波结构的非正规折射. 相似文献
3.
Jeong-Yeol Choi Edward J.-R. Shin In-Seuck Jeung 《Proceedings of the Combustion Institute》2009,32(2):2387-2396
The instability of oblique shock wave (OSW) induced combustion is examined for a wedge with a flow turning angle greater than the maximum attach angle of the oblique detonation wave (ODW), where archival results rarely exist for this case in previous literatures. Numerical simulations were carried out for wedges of different length scales to account for the ratio of the chemical and fluid dynamic time scales. The results reveal three different regimes of combustion. (1) No ignition or decoupled combustion was observed if a fluid dynamic time is shorter than a chemical time behind an OSW. (2) Oscillatory combustion was observed behind an OSW if a fluid dynamic time is longer than a chemical time behind an OSW and the fluid dynamic time is shorter than the chemical time behind a normal shock wave (NSW) at the same Mach number. (3) Detached bow shock-induced combustion (or detached overdriven detonation wave) was observed if a fluid dynamic time is longer than a chemical time behind a NSW. Since no ignition or decoupled combustion occurs as a very slow reaction and the detached wave occurs as an infinitely fast reaction, the finite rate chemistry is considered to be the key for the oscillating combustion induced by an OSW over a wedge of a finite length with a flow turning angle greater than the maximum attach angle for an ODW. Since this case has not been previously reported, grid independency was tested intensively to account for the interaction between the shock and reaction waves and to determine the critical time scale where the oscillating combustion can be observed. 相似文献
4.
Two dimensional numerical simulation of the structure of gaseous detonation is investigated by utilizing the single step Arrhenius kinetic reaction mechanism in both high and low activation energy mixtures, characterized by their irregular and regular detonation structure, respectively. All the computations are performed on a small Beowulf cluster with six nodes. The dependency of the structure on the grid resolution is performed and it is found that, resolution of more than 300 cells per hrl is required to demonstrate the role of hydrodynamic instabilities, (KH and RM instabilities) in detonation propagation in irregular structures, while due to the absence of fine-scale structures, resolution of 50 cells per hrl, gives the physical structure of detonation with regular structures. Results show that the transverse waves in irregular structure are significantly stronger than the transverse wave in regular structure detonation, which can enhance the burning rate of the unburned pockets behind the shock front. Results for resolution of 600 cells per hrl illustrate that, in addition to the primary mode, the interaction of large vortices with the shock front provides secondary modes in the structure which leads to the irregularity of the structure in high activation energy mixture. In contrast with the results obtained for regular structure, which no unburned gas pockets and vortices observed behind the front, the results for irregular structure reveal that most portions of the gases, escape from shock compression and create large unburned gas pockets behind the both weak section of the Mach stem and the incident wave, which will burn eventually by the turbulent mixing due to the vortices associated with hydrodynamic instabilities. Therefore, the ignition mechanism in irregular structure is due to the both shock compression and by turbulent mixing associated with hydrodynamic instabilities, while the shock compression yields the ignition mechanism in regular structure detonation. 相似文献
5.
为了研究激光击穿空气产生的等离子体爆轰波形成机制和传播规律,利用高能量CO2激光器产生强激光,进行了空气中产生激光支持等离子体爆轰波实验。实验中:设置了诱导靶板,用于诱发和定位空气中的激光支持爆轰波;以激光器升压过程球隙放电产生的光信号作为触发源,触发高时间分辨率(纳秒级)的高速相机,记录了激光支持爆轰波的成长和传播全过程。分析了激光支持爆轰波的形成机理和传播规律。采用C-J爆轰理论,计算了激光支持爆轰波的压力和温度。研究结果表明:激光支持等离子体爆轰波形成初期,等离子体爆轰波发光体为球形;随着时间增加,等离子体爆轰波发光体的形状类似流星,且头部为等离子体前沿吸收层,亮度较高,而尾部等离子体温度较低,亮度较弱。等离子体爆轰波高速向激光源的方向移动,爆轰波速度高达18 km/s,温度约为107K。随着激光强度的减弱,爆轰波速度迅速按指数规律衰减,当爆轰波吸收的激光能量不能有效支持爆轰波传播时,爆轰波转变为冲击波。 相似文献
6.
考虑几何结构参数对激波聚焦触发爆轰波的复杂影响,对H2/Air预混气的环形射流激波聚焦起爆现象开展了数值模拟研究,详细分析了不同隔板深度条件下的激波聚焦过程、流场演化特征以及爆轰波参数变化规律。研究结果表明,凹腔内激波聚焦诱导的局部爆炸以及隔板前缘处射流形成"卷吸涡"是引起爆轰波触发的两个重要机制,而隔板深度是影响环形射流激波聚焦起爆性能的关键因素。随着隔板深度的增加,凹腔内激波聚焦的强度逐步增强,回传的能量损失有所减小,进而导致爆燃转爆轰的距离与时间显著缩短。此外,当隔板深度由1 mm逐渐增加至3 mm时,爆轰波自持传播稳定性呈现出先降低后升高的变化趋势,产生这一现象的主要原因是爆轰波强度与三波点运动的相互作用。 相似文献
7.
Brent A. Rankin Joshua R. Codoni John L. Hoke Frederick R. Schauer 《Proceedings of the Combustion Institute》2019,37(3):3479-3486
The structure of detonation waves propagating through the annular channel of an optically accessible non-premixed rotating detonation engine (RDE) are investigated using mid-infrared imaging. The RDE is operated on hydrogen–air mixtures for a range of air mass flow rates and equivalence ratios. Instantaneous images of the radiation intensity from water vapor are acquired using a mid-infrared camera and a band-pass filter (2.890?±?0.033?µm). The instantaneous mid-infrared images reveal the stochastic nature of the detonation wave structure, position and angle of oblique and reflected shock waves, presence of shear layer separating products from the previous and current cycles, and extent of mixing between the reactants and products in the reactant fill zone in front of the detonation wave. The images show negligible signal directly in front of the detonation waves suggesting that there is minimal mixing between the reactants and products from the previous cycle ahead of the detonation wave for most operating conditions. The mid-infrared images provide insights useful for improving fundamental understanding of the detonation structure in RDEs and benchmark data for evaluating modeling and simulation results of RDEs. 相似文献
8.
以超声速预混气中的斜爆轰波为研究对象,对其在来流边界层效应下的特性进行了实验研究.在马赫数为3的超声速预混风洞中,通过斜坡诱导产生了斜爆轰波.当来流的当量比较低时,预混气中产生的是化学反应锋面与激波面非耦合的激波诱导燃烧现象.此时边界层分离区中的化学反应放热将使分离区尺度显著增大,流场非定常性显著增强,激波位置剧烈振荡.当来流的当量比较高时,预混气将产生斜爆轰波.此时边界层分离区会影响到斜爆轰波起爆时的形态.在小尺度分离区下,斜爆轰波起爆时呈突跃结构(有横波);在中等尺度分离区下,流场固有的非定常性使斜爆轰波呈间歇突跃结构;在大尺度分离区下,斜爆轰波起爆则呈完全的平滑结构(无横波). 相似文献
9.
We examine detonation waves with a four-step chain-branching reaction model that exhibits explosion limits close to the two lower limits of hydrogen–oxygen chemistry. The reaction model consists of a chain-initiation step and a chain-branching step, both temperature-dependent with Arrhenius kinetics, followed by two pressure-dependent termination steps. Increasing the chain-branching activation energy or the overdrive shortens the reaction length in the ZND wavelength and leads to more unstable detonations, according to multi-dimensional linear stability analysis. Corresponding numerical simulations show that detonations with weak chain-branching reactions have a wave structure similar to those with a single-step reaction; strong chain-branching detonations show distinct keystone features. Keystone regions are bounded by a discontinuity in reactivity across the shear layers emanating from the triple points at the intersection of the transverse waves and the main front. Especially in the strong case, chain-branching occurs within a thin front at the back side of the keystone figure, or immediately behind Mach stems. 相似文献
10.
Experimental investigations of detonation initiation by hot jets in supersonic premixed flows 下载免费PDF全文
<正>A new method to initiate and sustain the detonation in supersonic flow is investigated.The reaction activity of coming flow may influence the result of detonation initiation.When a hot jet initiates a detonation wave successfully, there may exist two types of detonations.If the detonation velocity is greater than the velocity of coming flow,there will be a normal detonation here.Because of the influence of boundary layer separation,the upstream detonation velocity is much greater than the Chapman-Jouguet(CJ) detonation velocity.On the other hand,if the detonation velocity is less than the velocity of coming flow,an oblique detonation wave(ODW) will form.The ODW needs a continuous hot jet to sustain itself.If the jet pressure is lower than a certain value,the ODW will decouple.In contrast,the normal detonation wave can sustain itself without the hot jet. 相似文献
11.
Jason R. Burr 《Proceedings of the Combustion Institute》2019,37(3):3471-3478
An experimental study was conducted to characterize fundamental behavior of detonation waves propagating across an array of reactant jets inside a narrow channel, which simulated an unwrapped rotating detonation engine (RDE) configuration. Several key flow features in an ethylene-oxygen combustor were explored by sending detonation waves across reactant jets entering into cold bounding gas as well as hot combustion products. In this setup, ethylene and oxygen were injected separately into each recessed injector tube, while a total of 15 injectors were used to establish a partially premixed reactant jet array. The results revealed various details of transient flowfield, including a complex detonation wave front leading a curved oblique shock wave, the unsteady production of transverse waves at the edge of the reactant jets, and the onset of suppressed reactant jets re-entering the combustor following a detonation wave passage. The visualization images showed a complex, multidimensional, and highly irregular detonation wave front. It appeared non-uniform mixing of reactant jets lead to dynamic transverse wave structure. The refreshed reactant jets evolving in the wake of the detonation wave were severely distorted, indicating the effect of dynamic flowfield and rapid pressure change. The results suggest that the mixing between the fuel and oxidizer, as well as the mixing between the fresh reactants and the background products, should affect the stability of the RDE combustor processes. 相似文献
12.
用两相流模型对悬浮RDX炸药粉尘爆轰波进行了数值模拟。RDX炸药颗粒在爆轰波阵面后的高温高速气流中加速并升温,颗粒表面发生熔化。参考液滴在高速气流作用下剥离的效应,假设炸药熔化部分在高速气流的作用下发生剥离,破碎成极小的颗粒,瞬时发生分解反应,释放出能量支持爆轰波传播。数值模拟了在不同粒径和浓度的悬浮RDX炸药粉尘中爆轰波的发展与传播过程,得到了爆轰波流场中气-固两相的物理量分布,并确定了爆轰波参数。在较低的RDX粉尘浓度条件下,爆轰波阵面压力的峰值曲线出现振荡。当RDX粉尘浓度在80~150 g/m3时,数值模拟得到的爆轰波阵面压力峰值曲线的振荡是规则的;当RDX粉尘浓度为70 g/m3时,爆轰波阵面压力峰值曲线出现不规则振荡。 相似文献
13.
Acoustic timescale Deflagration-to-Detonation Transition (DDT) has been shown to occur through the generation of compression waves emitted by a hot spot or reaction centre where the pressure and temperature increase with little diminution of density. In order to compensate for the multi-scale nature of the physico-chemical processes, previous numerical simulations in this area have been limited to relatively small activation energies. In this work, a computational study investigates the effect of increased activation energy on the time required to form a detonation wave and the change in behaviour of each hot spot as the activation energy is increased. The simulations use a localised spatially distributed thermal power deposition of limited duration into a finite volume of reactive gas to facilitate DDT. The Adaptive Wavelet-Collocation Method is used to solve efficiently the 1-D reactive Euler equations with one-step Arrhenius kinetics. The DDT process as described in previous work is characterised by the formation of hot spots during an initial transient period, explosion of the hot spots and creation of an accelerating reaction front that reaches the lead shock and forms an overdriven detonation wave. Current results indicate that as the activation energy is raised the chemical heat release becomes more temporally distributed. Hot spots that produce an accelerating reaction front with low activation energies change behaviour with increased activation energy so that no accelerating reaction front is created. An acoustic timescale ratio is defined that characterises the change in behaviour of each hot spot. 相似文献
14.
Detonation waves in gases are unstable and form cellular structures. The cellular structure can range from being very regular, to very irregular, where new modes are continuously formed on the front of the detonation wave. The present work addresses the mechanism of new cell formation in irregular structure detonations. Using idealized one-step chemistry calculations on sufficiently wide domains, as to avoid mode-locking, the present work reveals a novel mechanism for new mode formation in cellular detonations. The mechanism involves the creation of wave bifurcations on the front of the Mach shock following triple shock collisions. The numerical simulations reveal that these new triple points, through further reflections with pre-existing modes in asymmetric cells, can give rise to cell multiplication. Parameters favourable to this mechanism were found in good correlation with parameters leading to irregular cellular structures, as observed in previous experiments. 相似文献
15.
16.
17.
Formation of transverse waves in oblique detonations 总被引:1,自引:0,他引:1
Jimmy Verreault Andrew J. Higgins Robert A. Stowe 《Proceedings of the Combustion Institute》2013,34(2):1913-1920
The structure of oblique detonation waves stabilized on a hypersonic wedge in mixtures characterized by a large activation energy is investigated via steady method of characteristics (MoC) calculations and unsteady computational flowfield simulations. The steady MoC solutions show that, after the transition from shock-induced combustion to an overdriven oblique detonation, the shock and reaction complex exhibit a spatial oscillation. The degree of overdrive required to suppress this oscillation was found to be nearly equal to the overdrive required to force a one-dimensional piston-driven detonation to be stable, demonstrating the equivalence of two-dimensional steady oblique detonations and one-dimensional unsteady detonations. Full unsteady computational simulations of the flowfield using an adaptive refinement scheme showed that these spatial oscillations are transient in nature, evolving in time into transverse waves on the leading shock front. The formation of left-running transverse waves (facing upstream) precedes the formation of right-running transverse waves (facing downstream). Both sets of waves are convected downstream away from the wedge in the supersonic flow behind the leading oblique front, such that the mechanism of instability must continuously generate new transverse waves from an initially uniform flow. Together, these waves define a cellular structure that is qualitatively similar to a normal propagating detonation. 相似文献
18.
19.
C. M. Tarver J. W. Forbes P. A. Urtiew 《Russian Journal of Physical Chemistry B, Focus on Physics》2007,1(1):39-45
This paper discusses the Nonequilibrium Zeldovich-von Neumann-Doring (NEZND) theory of self-sustaining detonation waves and
the Ignition and Growth reactive flow model of shock initiation and detonation wave propagation in solid explosives. The NEZND
theory identified the nonequilibrium excitation processes that precede and follow the exothermic decomposition of a large
high explosive molecule into several small reaction product molecules. The thermal energy deposited by the leading shock wave
must be distributed to the vibrational modes of the explosive molecule before chemical reactions can occur. The induction
time for the onset of the initial endothermic reactions can be calculated using high pressure-high temperature transition
state theory. Since the chemical energy is released well behind the leading shock front of a detonation wave, a physical mechanism
is required for this chemical energy to reinforce the leading shock front and maintain its overall constant velocity. This
mechanism is the amplification of pressure wavelets in the reaction zone by the process of de-excitation of the initially
highly vibrationally excited reaction product molecules. This process leads to the development of the three-dimensional structure
of detonation waves observed for all explosives. For practical predictions of shock initiation and detonation in hydrodynamic
codes, phenomenological reactive flow models have been developed. The Ignition and Growth reactive flow model of shock initiation
and detonation in solid explosives has been very successful in describing the overall flow measured by embedded gauges and
laser interferometry. This reactive flow model uses pressure and compression dependent reaction rates, because time-resolved
experimental temperature data is not yet available. Since all chemical reaction rates are ultimately controlled by temperature,
the next generation of reactive flow models will use temperature dependent reaction rates. Progress on a statistical hot spot
ignition and growth reactive flow model with multistep Arrhenius chemical reaction pathways is discussed.
The text was submitted by the authors in English. 相似文献
20.
《Combustion Theory and Modelling》2013,17(4):557-574
Very-long-time numerical simulations of an idealized pulsating detonation with one irreversible reaction having an Arrhenius form are performed using a hierarchical adaptive second-order Godunov-type scheme. The initial data are given by the steady solution and the truncation error produces the perturbation to trigger the instability. The detonation is allowed to run for thousands of half-reaction times of the underlying steady wave to ensure that the final amplitudes and periods of the nonlinear oscillations are achieved. Thorough resolution studies are performed for various representative regimes of the instability. It is shown that to obtain quantitatively good solutions over 50 numerical grid points in the half-reaction length of the steady detonation are required, while to obtain a converged solution over 100 points are required, even near the stability boundary. This is much higher resolution than has generally been used in previous papers in either one or two dimensions. Resolutions of less than approximately 20 points per half-reaction length give very poor predictions of the periods and amplitudes near the stability boundary or entirely spurious solutions for more unstable detonations. The evolution of the converged solutions as the activation energy increases, and the detonation becomes more unstable, is also investigated. 相似文献