Effects of chromatography conditions on intact protein separations for top-down proteomics

A chiral stationary phase (CSP) has been prepared by chemically bonding a chiral pseudo-18-crown-6 type host having a 1-phenyl-1,2-cyclohexanediol unit to 3-aminopropyl silica gel. The chiral column was prepared by the slurry-packing method in a stainless steel HPLC column. Normal mobile phases can be used with this CSP in contrast to conventional dynamic coating type CSPs. Enantiomers of 20 out of 30 amino compounds, including 20 amino acids, 2 amino acid methyl esters, 6 amino alcohols, and 2 lipophilic amines, were efficiently separated on columns with this CSP. It is noteworthy that 15 amino compounds out of 30 were separated with better separation factors and shorter retention times compared to the corresponding CSP having pseudo-18-crown-6 with 1-phenyl-1,2-ethanediol as a chiral unit. In view of the correlation between the enantiomer selectivities observed in chromatography and those obtained in gas phase FABMS-EL methods and solution phase titrations, chiral recognition in the host-guest interaction likely contributes to enantiomer separation.     

Recent progress in enantiomer separation by capillary electrochromatography

Enantiomer separation by electrochromatography (CEC) can be performed in three modes: (i) open-tubular capillary electrochromatography (o-CEC), in which the chiral selector is physically adsorbed coated, and thermally immobilized or covalently attached to the internal capillary wall; (ii) packed capillary electrochromatography (p-CEC), in which the capillary is either filled with chiral modified silica particles or with an achiral packing material, and a chiral selector is added to the mobile phase; and (iii) monolithic (rod)-capillary electrochromatography (rod-CEC) in which the chiral stationary phase (CSP) consists of a single piece of porous solid. We present an overview on methods and new trends in the field of electrochromatographic enantiomer separation such as CEC with either nonaqueous mobile phases or stationary phases with incorporated permanent charges, or with packing beds consisting of nonporous silica particles or particles with very small internal diameters.     

Monolithic silica columns with chemically bonded β-cyclodextrin as a stationary phase for enantiomer separations of chiral pharmaceuticals

An enantioselective silica rod type chiral stationary phase (CSP) is presented; a novel combination of the well known enantiomer separation properties of -cyclodextrin and the unique properties concerning the flow behavior of silica monoliths. Two different synthesis routes are described, and it was found that the in situ modification of a plain silica rod column turned out to be the best. The chromatographic behaviour of the -cyclodextrin silica rod was studied and compared with a very similar commercially available -cyclodextrin bonded particulate material (ChiraDex^®). Even if the amount of -cyclodextrin bound to the silica rod was only about half of the amount of -cyclodextrin bound to ChiraDex^® particles, good resolutions were achieved for a set of chiral test components like Chromakalin, Prominal, Oxazepam, Methadone and some other drugs. By taking advantage of the unique features of the silica rods relating to their flat H/u (Van Deemter) curves, fast enantiomer separations could be demonstrated.     

Monolithic silica rod columns for high-efficiency reversed-phase liquid chromatography

Chromatographic properties of a new type of monolithic silica rod columns were examined. Silica rod columns employed for the study were prepared from tetramethoxysilane, modified with octadecylsilyl moieties, and encased in a stainless-steel protective column with two polymer layers between the silica and the stainless-steel tubing. A 25 cm column provided up to 45,000 theoretical plates for aromatic hydrocarbons, or a minimum plate height of about 5.5 μm, at optimum linear velocity of ca. 2.3 mm/s and back pressure of 7.5 MPa in an acetonitrile-water (80/20, v/v) mobile phase at 40°C. The permeability of the column was similar to that of a column packed with 5 μm particles, with K(F) about 2.4×10(-14) m(2) (based on the superficial linear velocity of the mobile phase), while the plate height value equivalent to that of a column packed with 2.5 μm particles. Generation of 80,000-120,000 theoretical plates was feasible with back pressure below 30 MPa by employing two or three 25 cm columns connected in series. The use of the long columns enabled facile generation of large numbers of theoretical plates in comparison with conventional monolithic silica columns or particulate columns. Kinetic plot analysis indicates that the monolithic columns operated at 30 MPa can provide faster separations than a column packed with totally porous 3-μm particles operated at 40 MPa in a range where the number of theoretical plates (N) is greater than 50,000.     

Preparation and evaluation of a chiral stationary phase covalently bound with a chiral pseudo-18-crown-6 ether having a phenolic hydroxy group for enantiomer separation of amino compounds

In order to develop a chiral stationary phase (CSP), which has even higher separation ability than the corresponding commercially available crown ether based CSP (OA-8000 having a pseudo-18-crown-6 ether with an OMe group as a selector), chemically bonded type CSP having a phenolic OH group on a crown ring was developed. Normal mobile phases with or without acid additive can be used with this OH type CSP in contrast to the conventional OMe type CSP which has a neutral chiral selector. Enantiomers of 25 out of 27 amino compounds, including 20 amino acids, 5 amino alcohols, and 2 lipophilic amines, were efficiently separated on a column with this CSP. Nine amino compounds out of 27 were separated with better separation factors than the corresponding OMe type CSP. It is noteworthy that the chromatography on this CSP exhibited excellent enantiomer-separations for amines and amino alcohols when triethyl amine was used as an additive in the mobile phase. Comparison of enantiomer separation ability on this OH type of CSP and on the OMe type of CSP and correlation between the enantioselectivity in chiral chromatography and that of the corresponding model compounds in solution imply that the chiral separation arose from chiral recognition in host guest interactions.     

硅胶负载手性氨基醇聚合物的合成及其应用

以L-亮氨酸(L-Leu)为手性源,经酯化、格氏化、酰胺化等步骤制备手性单体(L-NALAA),以该单体为手性识别基团,在引发剂偶氮二异丁腈和交联剂乙二醇二甲基丙烯酸酯(EDMA)的作用下,与烯化功能硅胶发生自由基共聚反应,制备了新型键合硅胶手性固定相,其结构经FT-IR、TGA、EA表征。以4种对映异构体为模型药物对手性材料手性固定相的手性拆分性能进行研究,结果表明,手性材料手性固定相对奥美拉唑和兰索拉唑的拆分效果较好。     

Cyclodextrin-modified monolithic columns for resolving dansyl amino acid enantiomers and positional isomers by capillary electrochromatography

We describe beta- and gamma-cyclodextrins (beta- and gamma-CD)-modified monolithic columns prepared by sol-gel process and chemical modifications. The monolithic silica column was fabricated inside a fused-silica capillary with 100 microm inner diameter by sol-gel process. The monolithic silica matrix was chemically modified chiral selectors of beta- or gamma-CDs with a spacer of 3-glycidoxypropyltrimethoxysilane by on-column reactions. Gamma-CD-modified monolithic column has successfully been applied for the separation of dansyl amino acid enantiomers. Beta-CD-modified monolithic column has been used for the separation of the positional isomers of o-, m-, and p-cresols and the enantioseparation of racemates of benzoin and several dansyl amino acids by capillary electrochromatography, respectively. For the separation of neutral positional isomers, a positive electric field was applied. However, for the separation of negatively charged analytes, a negative electric field was applied at the inlet of column. The separation efficiency of 5.0 x 10(4) theoretical plates/m for dansyl-L-threonine was obtained at electric field strength of -300 V/cm in the mobile phase of 50 mM 2-(N-morpholino)ethanesulfonic acid (MES)-Tris/methanol (70/30) buffer at pH 7.0. L-enantiomers were eluted as the first peak. Scanning electron micrograph showed that monolithic columns have the morphology of continuous skeleton and large through-pores.     

Chemically L-prolinamide-modified monolithic silica column for enantiomeric separation of dansyl amino acids and hydroxy acids by capillary electrochromatography and mu-high performance liquid chromatography

A silica-based chiral monolithic column prepared by sol-gel process and chemical modification of chiral selector was used for enantioseparation of dansyl amino acids and hydroxy acids by capillary electrochromatography (CEC) and mu-high-performance liquid chromatography (mu-HPLC). L-Prolinamide was modified as a chiral selector. The chiral stationary phase (CSP), the chiral complex of Cu(II) with L-prolinamide, provides an anodic electroosmotic flow (EOF) in CEC. The EOF was found to be dependent on applied electric field strength, the pH, and the composition of mobile phases. Scanning electron micrograph showed that monolithic columns have the morphology of continuous skeleton and large through-pore. D-Enantiomers migrated before L-enantiomers except for dansyl-(Dns)-DL-Ser. The separation efficiencies of up to 17600 (D) and 13,200 plates m(-1) (L) were achieved for the separation of DL-indole-3-lactic acid.     

金纳米粒子修饰的手性毛细管电色谱固定相的制备及性能表征

制备了粒径为15 nm的金纳米粒子(GNPs)并将其修饰到氨基衍生化的硅胶整体柱内,通过化学键合法将牛血清白蛋白(BSA)固载到GNPs的表面作为手性固定相。通过透射电子显微镜、扫描电子显微镜等方法进行表征,结果表明,GNPs分散性良好,并被成功地修饰到毛细管柱内,含量高达17.18%。优化了BSA手性柱的制备条件,最终确定了体积分数为10%的3-氨丙基三乙氧基硅烷(APTES)和15 g/L BSA为最佳反应条件。在毛细管电色谱分离模式下,对缓冲液pH值、电压等分离条件进行了考察,最终选择了10 mmol/L pH 7.4的磷酸缓冲液和15 kV运行电压作为最佳分离条件。手性柱对3种手性化合物(色氨酸、阿替洛尔和麻黄碱)有拆分效果,对色氨酸能实现基线分离。与物理吸附法相比,化学键合法制备的手性柱拆分效果好,分析物无需柱前衍生化,且色谱柱稳定性良好。该文的制备方法也为其他类型手性选择剂的引入提供了良好的思路。     

Enantioseparation of aromatic amino acids using CEC monolith with novel chiral selector,N‐methacryloyl‐l‐histidine methyl ester

A new type of polymethacrylate‐based monolithic column with chiral stationary phase was prepared for the enantioseparation of aromatic amino acids, namely d ,l ‐phenylalanine, d ,l ‐tyrosine, and d ,l ‐tryptophan by CEC. The monolithic column was prepared by in situ polymerization of butyl methacrylate (BMA), N‐methacryloyl‐l ‐histidine methyl ester (MAH), and ethylene dimethacrylate (EDMA) in the presence of porogens. The porogen mixture included DMF and phosphate buffer. MAH was used as a chiral selector. FTIR spectrum of the polymethacrylate‐based monolith showed that MAH was incorporated into the polymeric structure via in situ polymerization. Some experimental parameters including pH, concentration of the mobile phase, and MAH concentration with regard to the chiral CEC separation were investigated. Single enantiomers and enantiomer mixtures of the amino acids were separately injected into the monolithic column. It was observed that l ‐enantiomers of aromatic amino acids migrated before d ‐enantiomers. The reversal enantiomer migration order for tryptophan was observed upon changing of pH. Using the chiral monolithic column (100 μm id and 375 μm od), the best chiral separation was performed in 35:65% ACN/phosphate buffer (pH 8.0, 10 mM) with an applied voltage of 12 kV in CEC. SEM images showed that the chiral monolithic column has a continuous polymeric skeleton and large through‐pore structure.     

Enantiomer separation by reversed-phase liquid chromatography with novel hydrophobic phases composed of chiral cationic surfactants

This paper describes enantiomer separation using four kinds of chiral stationary phases (CSPs) where quaternary ammonium surfactants containing L-valine diamide moieties into long alkyl chains were bound to silicagel supports by reversed phase liquid chromatography. Our aim was to examine hydrogen bonding association of the chiral moiety in hydrophobic phase brought about by aggregation of the micelle-forming surfactants on the surface. The following CSPs were thus derived from the vinyl-terminated chiral surfactants via hydrosilylation: CSP 1 from N-[3-(10-undecenoyl-L-valylamino)propyl]-N,N,N-trimethylammonium bromide, CSP 2 from N-[6-(10-undecenoyl-L-valylamino)hexyl]-N,N,N-trimethyl-ammonium bromide, CSP 3 from N-[3-(10-undecenoyl-L-valylamino)propyl]-N-octadecanyl-N,N-dimethyl-ammonium bromide and CSP 4 from N-[6-(10-undecenoyl-L-valylamino)hexyl]-N-octadecanyl-N,N-dimethylammonium bromide. The degree of hydrophobicity in the interfacial phase was observed by measuring pyrene fluorescence in aqueous media including an organic modifier. Retention of racemic N-acylleucine isopropyl esters was highest in CSP 4, followed by 3, 2, and 1. Largest alpha values toward enantiomer separation were observed for CSP 4 where the chiral moieties were kept through a hexamethylene unit apart from the polar head groups and to which another long alkyl chain was attached, as compared with those for CSP 4. In CSP 4, the chiral moiety to interact with enantiomeric solutes should be buried into the interfacial phase deeply in more extent than CSP 3. In a similar manner, CSP 2 has more effective for enantiomer separation than CSP 1. The interfacial phase of these CSPs was easily exposed to the bulk phase because of the affinity between the bulk phase and the polar head groups as well as their electrostatic repulsion. However, degree of the enantiomer separation can be controlled by the depth of the chiral moiety in the hydrophobic interfacial phase.     

Chiral Monolithic Silica-Based HPLC Columns for Enantiomeric Separation and Determination: Functionalization of Chiral Selector and Recognition of Selector-Selectand Interaction

This review draws attention to the use of chiral monolithic silica HPLC columns for the enantiomeric separation and determination of chiral compounds. Properties and advantages of monolithic silica HPLC columns are also highlighted in comparison to conventional particle-packed, fused-core, and sub-2-µm HPLC columns. Nano-LC capillary monolithic silica columns as well as polymeric-based and hybrid-based monolithic columns are also demonstrated to show good enantioresolution abilities. Methods for introducing the chiral selector into the monolithic silica column in the form of mobile phase additive, by encapsulation and surface coating, or by covalent functionalization are described. The application of molecular modeling methods to elucidate the selector–selectand interaction is discussed. An application for enantiomeric impurity determination is also considered.     

Enantioseparation of dansyl amino acids by HPLC on a monolithic column dynamically coated with a vancomycin derivative

In this work a chiral stationary phase was prepared by dynamically coating a monolithic reversed-phase HPLC column with a vancomycin-derivative as chiral selector. A hydrophobic alkyl-chain was attached to the vancomycin molecule, providing the immobilization of the chiral selector on the reversed-phase material. Dansyl amino acids were chosen as model analytes for testing the separation power of the dynamically coated phase. All investigated compounds were separated into their enantiomers. Compared with a conventionally packed vancomycin-CSP, a reversal of the enantiomer elution order was obtained.     

Chemically modified chiral monolithic silica column prepared by a sol-gel process for enantiomeric separation by micro high-performance liquid chromatography

In this work a new type of chiral monolith silica column was developed for the chiral separation by micro high-performance liquid chromatography (micro-HPLC). The chiral monolith column with a continuous skeleton and a large through-pore structure was prepared inside a capillary of 100 microm I.D. by a sol-gel process, and chemically modified with chiral selectors, such as L-phenylalaninamide, L-alaninamide and L-prolinamide, on the surface of the monolithic silica column. Based on the principle of ligand exchange, these chiral monolithic columns were successfully used for the separation of dansyl amino acid enantiomers, as well as hydroxy acid enantiomers by micro-HPLC. The chromatographic conditions, the enantioselectivity and the performance of columns are discussed.     

How to utilize the true performance of monolithic silica columns

Ways of utilizing the true separation efficiency of monolithic silica (MS) columns were studied. The true performance of MS columns, both regular-sized (rod-type clad with PEEK resin, 4.6 mm ID, 10 cm) and capillary sized (in 100 or 200 microm ID fused silica capillary, 25-140 cm) was evaluated by calculating the contribution of extra-column effects. HETP values of 7-9 microm were observed for solutes having retention factors (kvalues) of up to 4 for rod columns and up to 15 for a capillary column. The high permeability of MS columns allowed the use of long columns, with several connected together in the case of rod columns. Narrow-bore connectors gave good results. Peak variance caused by a column connector ranges from 50 to 70% of that caused by one rod-type column for up to three connectors or four columns in 80% methanol, but the addition of a 4th or 5th connector to add a 5th and 6th column, respectively, caused a much greater increase in peak variance, especially for long-retained solutes, which is greater than the variance caused by one rod column. Rod columns seem to show slightly lower efficiency at a pressure higher than 10 MPa or so. The use of acetonitrile-water as a mobile phase better preserved the ability of individual rod columns to generate up to 100,000 theoretical plates with 14 columns connected. Methods for eliminating extra-column effects in micro-HPLC were also studied. Split injection and on-column detection resulted in optimum performance. A long MS capillary measuring 140 cm produced 160,000 theoretical plates. The column efficiency of a capillary column was not affected by the pressure, showing advantages over the rod columns that exhibited peak broadening caused by connectors and pressure.     

Preparation and evaluation of monodispersed,submicron, non‐porous silica particles functionalized with β‐CD derivatives for chiral‐pressurized capillary electrochromatography

Submicron, non‐porous, chiral silica stationary phase has been prepared by the immobilization of functionalized β‐CD derivatives to isocyanate‐modified silica via chemical reaction and applied to the pressurized capillary electrochromatography (pCEC) enantio‐separation of various chiral compounds. The submicron, non‐porous, cyclodextrin‐based chiral stationary phases (sub_μm‐CSP2) exhibited excellent chiral recognition of a wide range of analytes including clenbuterol hydrochloride, mexiletine hydrochloride, chlorpheniramine maleate, esmolol hydrochloride, and metoprolol tartrate. The synthesized submicron particles were regularly spherical and uniformly non‐porous with an average diameter of around 800 nm and a mean pore size of less than 2 nm. The synthesized chiral stationary phase was packed into 10 cm × 100 μm id capillary columns. The sub_μm‐CSP2 column used in the pCEC system showed better separation of the racemates and at a higher rate compared to those used in the capillary liquid chromatography mode (cLC) system. The sub_μm‐CSP2 possessed high mechanical strength, high stereoselectivity, and long lifespan, demonstrating rapid enantio‐separation and good resolution of samples. The column provided an efficiency of up to 170 000 plates/m for n‐propylbenzene.     

万古霉素手性固定相的制备与对映体分离研究

采用双官能团试剂4,4′-二苯基甲烷二异氰酸酯在无水二甲基甲酰胺(DMF)中直接与大环糖肽类抗生素万古霉素及γ-氨丙基硅胶键合,得到环状抗生素手性固定相(CSP)并用于高效液相色谱手性分析。实验结果证实,合成的万古霉素CSP在正相和反相条件下均有一定的拆分能力,其中在反相条件下拆分了17种对映体,显示出其较为广泛的拆分范围,且磷酸缓冲体系略优于三乙胺-乙酸缓冲体系;对一些物质,如D,L-丹酰化氨基酸的拆分有一定的规律,能给出绝对构型信息。所制备的CSP在相体系转化时不发生老化和变性,显示了一定的稳定性。对该CSP的拆分机理进行分析所得到的结果与Armstrong等的分析结果基本一致。     

纤维素三(3, 5-二硝基)苯甲酸酯手性固定相的制备和应用研究

纤维素三(3,5-二硝基)苯甲酸酯用超声反应合成,具有反PirkleI型手性固定相的结构,将其涂布在大孔硅胶载体上,用作一种新的高效液相色谱手性固定相,成功地拆分了布洛芬和氰戊菊酯的中间体。讨论了其分离的机理。     

Enantiomer separation by capillary electrochromatography on a cyclodextrin-modified monolith

A chiral monolithic stationary phase was prepared by packing a capillary with bare porous silica and sintering the silica bed at high temperature. The resulting silica monolith was polymer-coated with Chirasil-Dex, a permethylated beta-cyclodextrin covalently linked via an octamethylene spacer to dimethylpolysiloxane. Subsequently, Chirasil-Dex was thermally immobilized on the silica support and a chiral monolith of very high stability (30 kV, more than 400 bar pressure) was obtained. The enantiomer separation of various chiral compounds by monolithic (rod) capillary electrochromatography (rod-CEC) was feasible. This method was compared with capillary liquid chromatography (LC) in a single-column mode using unified equipment. About two to three times higher efficiency was found in the rod-CEC mode as compared to rod-LC. The influence of pressure-driven flow support on efficiency, resolution, elution time and baseline stability was investigated. The amount and nature of organic modifier strongly influences efficiency and resolution.     

Separation of racemic 2,4-dinitrophenyl amino acids on zirconia-immobilized quinine carbamate in reversed-phase liquid chromatography

Zirconia is known to be one of the best chromatographic support materials due to its excellent chemical, thermal, and mechanical stability. A quinine carbamate-coated zirconia was prepared as a chiral stationary phase for separation of enantiomers of DNP-amino acids in reversed-phase liquid chromatography. Retention and enantioselectivity of this phase were compared to those for quinine carbamate bonded onto silica. Most amino acids studied were separated on the quinine carbamate-zirconia CSP although retention was longer and chiral selectivity was somewhat lower than on the corresponding silica CSP. Increased retention and decreased selectivity are probably due to strong non-enantioselective Lewis acid-base interactions between the amino acid molecule and the residual Lewis acid sites on the zirconia surface.