压缩感知光谱成像技术的编码孔径与探测器匹配优化

编码孔径光谱成像仪在实际应用中存在着编码模板与探测器分辨率不匹配从而降低系统分辨率的问题。针对该问题进行了两种情况分析,并通过数学理论建模给出了相应的解决方案。对于编码模板分辨率高于探测器分辨率这一情况,提出引入邻域嵌入超分辨技术的方法,实现了基于压缩感知的超分辨光谱成像。对于编码模板分辨率低于探测器分辨率这一情况,提出区块阈值划分的编码孔径,将编码微元按照区块阈值重新划分并进行灰度分级,从而实现低分辨率编码模板的高分辨率编码孔径。利用梯度投影稀疏重构(GPSR)算法进行数据立方体重建,实验结果表明:运用基于超分辨理论的编码孔径快照光谱成像系统所测得的光谱图像更精准,内容更丰富;采用基于区块阈值划分的编码孔径的编码孔径快照光谱成像系统具有更高的空间分辨率和光谱分辨率。结果证实优化后的编码孔径快照光谱成像系统,其分辨率和成像质量大幅度提升,并实现了高分辨率元件的100%利用。     

球面参考光预放大数字全息成像系统分辨力

为了提高数字全息成像系统的成像分辨力,对以球面波作为参考光波的预放大数字全息成像系统的记录和再现过程进行了理论推导,得出了该系统的脉冲响应表达式,并由此分析了决定该系统成像分辨力的因素。在CCD成像分辨力高于显微物镜分辨力的情况下,通过对分辨力测试板进行实验,讨论了系统分辨力与记录距离的关系。结果表明:再现像的分辨力对记录距离不敏感;但在记录距离为零,即像面数字全息系统下,再现像具有更高的分辨力。实验结果与理论分析一致。     

高分辨率CCD图像传感器及CCD摄像机的性能评价

研究了ＣＣＤ图像传感器及ＣＣＤ摄像机的性能及测试方法。重点探讨了高分辨率的ＣＣＤ摄像机的成像特点。论述了高分辨率ＣＣＤ图像传感器和高分辨率ＣＣＤ摄像机的性能。这些性能与当前厂商提供的商用ＣＣＤ摄像机有许多不同之处。评价高分辨率ＣＣＤ图像传感器的性能主要有灵敏度、动态范围、分辨率和拖影。评价高分辨率ＣＣＤ摄像机性能有灵敏度、最小照度、分辨率和光学格式等。给出了高分辨ＣＣＤ摄像机的性能评价实例,简述了其工艺特点和技术特点。     

条纹管激光成像系统空间分辨力实验研究

简要分析了非扫描激光成像的技术优势,介绍了利用条纹管实现非扫描激光成像的工作原理,说明了图像空间分辨力与系统距离精度的对应关系。对影响图像空间分辨力的主要因素进行了理论分析,得到了系统总空间分辨力与各单元器件空间分辨力和放大倍率的对应关系,在此基础上,对现有条纹管成像系统进行了相应的计算,得到了空间分辨力的理论预期值;最后,提出了一种基于分辨力板成像的系统空间分辨力测试方法,设计了相应的验证实验,对实测图像进行了去噪处理和数据分析,得到了图像的衬比度传递函数(CTF)曲线,通过衬比度传递函数分析,计算出了成像系统的实际空间分辨力,并将实测的分辨力数据与理论值进行了对比分析。     

荧光谱线分布对共焦荧光显微镜分辨率的影响

研究了荧光谱线分布对共焦荧光显微镜中分辨率的影响,导出了荧光谱线分布的荧光功率传输函数、三维脉冲响应函数.数值计算了荧光谱线均匀分布的情况,结果表明：与采用单一中心荧光波长的分辨率比较,共焦荧光显微镜的横向分辨率、纵向分辨率随着荧光谱线范围和色散的增大而下降;谱线响应范围小的探测器有利于分辨率.     

Performance of third-order ghost imaging with second-order intensity correlation

The third-order ghost imaging with the second-order intensity correlation is theoretically and experimentally demonstrated.The resolution and visibility of the reconstructed image are discussed,and the relationship between resolution and visibility is analyzed.The theoretical results show that a tradeoff exists between the visibility and resolution of the reconstructed image;the better the image resolution,the worse the image visibility.Numerical simulations are carried out to verify this theory,and a ghost...     

Photothermal deflection microscopy for imaging sub-micronic defects in optical materials

Photothermal deflection is widely used to study defects in optical coatings and role of these defects in laser damage. Because defects responsible for laser damage are assumed to be nanometer-sized and lowly absorbing, both high spatial resolution and high sensitivity are required to detect them. In this work we theoretically and experimentally explore the capability of collinear photothermal deflection to give micronic resolution by reduction of the pump beam diameter. Thanks to a model describing temperature distribution and photothermal deflection, we have studied the effects of pump beam focusing on photothermal deflection. Then, we have developed a high resolution, high sensitivity microscope based on the photothermal deflection of a transmitted probe beam. The setup is characterized and the theoretical predictions are checked. We present a test of lateral spatial resolution obtained on specially prepared absorbing resolution targets and show that a lateral spatial resolution of 1 μm is reached on non-isolated defects. In case of single defects, we expect that 10 nm sized defects could be detected.     

Perfect digital holographic imaging with high resolution using a submillimeter-dimension CCD sensor

In order to improve the resolution of digital holography with a common-dimension charge-coupled device (CCD) sensor, the point spread functions are briefly derived for the commonly used and practical post-magnification, pre-magnification, and image-plane digital holographic microscopic systems. The ultimate resolutions of these systems are analyzed and compared. The results show that the ultimate lateral resolution of pre-magnification digital holography is superior to that of post-magnification digital holography in the same conditions. We also demonstrate that the ultimate lateral resolution of image-plane digital holography has no correlation with the photosensitive dimension of the CCD sensor, and it is not significantly related to the pixel size of the sensor. Moreover, both the ultimate resolution and the imaging quality of image-plane digital holography are superior to that of pre- and post-magnification digital holographic microscopy. High-resolution imaging, whose resolution is close to the ultimate resolution of the microscope objective, can be achieved by image-plane digital holography even with a submillimeter-dimension sensor. This system, by which perfect imaging can be achieved, is optimal for commonly used digital holographic microscopy. Experimental results demonstrate the correctness of the theoretical analysis.     

碳水混合物冲击压缩特性研究

 利用二级轻气炮加载技术研究了碳水混合物的冲击压缩特性。研究发现：冲击压力p低于19.0 GPa时，石墨与水混合物冲击压缩特性明显不同于金刚石与水混合物的冲击压缩；p大于23.0 GPa后，它们的特性十分接近，这说明有较多的石墨转变为金刚石；当p为52.9 GPa时石墨与水混合物的冲击压缩特性出现明显偏离，这和高压下碳水混合物产生气体成份有关。     

Resolution in X-ray Holography

Ｒｅｃｅｉｖｅｄ２６Ｊａｎ．１９９５；Ｒｅｖｉｓｅｄｍａｎｕｓｃｒｉｐｔｒｅｃｅｉｖｅｄ１８Ａｐｒ．１９９５ＲｅｓｏｌｕｔｉｏｎｉｎＸ－ｒａｙＨｏｌｏｇｒａｐｈｙ￥ＺＨＵＰｅｉｐｉｎｇ；ＸＩＡＯＴｉｑｉａｏ；ＣＨＥＮＪｉａｎｗｅｎ；ＸＵＺｈｉｚｈａｎ...     

利用小尺寸电荷耦合器件实现数字全息高分辨成像

为了在降低数字全息显微成像系统成本的同时实现高分辨成像,对像面数字全息显微术的记录与再现过程进行了理论分析,结合系统的点扩散函数,对该系统的横向分辨率进行了分析. 得到了如下结论：像面数字全息显微系统的横向分辨率对电荷耦合器件（CCD）光敏面尺寸变化不敏感;对于常见的CCD 器件,其像元尺寸的变化对该系统的横向分辨率影响甚微. 此外,对像面数字全息显微系统的成像特点进行了分析,结果表明：利用像面数字全息系统可以实现物体信息的完整记录与再现,其成像分辨率及像质优于预放大数字全息系统. 利用搭建的数字全息实验记录系统,从强度及位相两方面对理论分析结果进行了验证,实验结果表明了理论分析的正确性. 关键词： 像面数字全息术 横向分辨率 点扩散函数 小尺寸电荷耦合器件     

A note on the proper frequency resolution for the room transfer function in the phased beam tracing method

In the simulation of acoustic response of a room, one cannot satisfactorily estimate the transfer function or the impulse response with a sparse frequency resolution. We have studied about the frequency resolution for a satisfactory estimation of room transfer function or the reverberation time using the phased beam tracing method. In order to investigate what happens with the frequency resolution, a number of frequency resolution (0.01-1 Hz), which are usually employed in the numerical analysis, was tested for a room model. It was found that the total accumulated phase in a transfer function and the late part of an impulse response of a room are influenced by the frequency resolution. Main reason for the difference is the correct detection of non-minimum phase zeros, depending on the frequency resolution. A criterion for a proper frequency resolution was suggested by considering the modal density of three-dimensional space. When a sparse dataset was initially given, we showed that cubic spline interpolation can be used to enhance the precision of detection for non-minimum phase zeros.     

Noncollinear phase matching in fluorescence upconversion

We investigate noncollinear sum-frequency generation in a time-resolved fluorescence upconversion experiment to eliminate group-velocity mismatch (GVM), a major mechanism that deteriorates time resolution. The noncollinear geometry inherently causes phase-front mismatch (PFM) that also spoils time resolution. The effects of GVM and PFM on the time resolution are studied by numerical calculations and experiments. Based on the investigation, a fluorescence upconversion apparatus with time resolution better than 45 fs (FWHM) is demonstrated.     

Resolution of objects within subwavelength range by using the near field of a dipole

We analyze the far-field resolution of apertures that are illuminated by a point dipole located at subwavelength distances. It is well known that radiation emitted by a localized source can be considered a combination of traveling and evanescent waves, when represented by the angular spectrum method. The evanescent wave part of the source can be converted to propagating waves by diffraction at the aperture; thereby it contributes to the far-field detection. Therefore one can expect an increase in the resolution of objects. We present explicit calculations showing that the resolution at the far zone is improved by decreasing the source-aperture distance. We also utilize the resolution enhancement by the near field of a dipole to resolve two closely located apertures. The results show that without the near field (evanescent field) the apertures are not resolved, whereas with the near field of the dipole the far zone intensity distribution shows improved resolution. This method eliminates the requirements of near-field techniques such as controlling and scanning closely located tip detectors.     

An optimized two crystal arrangement for X-ray optics

Modification of the Schwarzschild optics for applications in hard X-ray imaging is discussed. The conditions necessary to achieve a high spatial resolution with two toroidally bent crystals in the Bragg geometry are formulated, and the focusing properties of the system are numerically simulated using the ray tracing method. It is predicted that such a system could provide a spatial resolution considerably higher than the resolution of the presently available X-ray optics.     

X射线全息记录过程中影响分辨率的主要因素分析

分析了Ｘ射线全息记录过程中影响分辨率的一些主要因素。在完全相干的条件下，Ｘ射线无透镜傅里叶变换全息图的最小分辨距离不可能小于记录时用的Ｘ射线聚束器的焦斑或滤波小孔的半径，而Ｘ射线同轴全息图不可能获得比记录介质的截止频率更高的分辨率。在部分相干的条件下，Ｘ射线无透镜傅里叶变换全息所要求的相干长度和分辨率与样品半径成二次线型关系。Ｙ射线同轴全息所要求的相干长度和分辨率的平方以及样品到全息图的距离成正比，而与样品尺寸无关。随着Ｘ射线全息图分辨率的提高，其所要求的相干长度将大幅度增长。 关键词：     

Submicrometer tomographic resolution examined using a micro-fabricated test object

To estimate the spatial resolution of microtomographs, a test object on the submicrometer scale was prepared by focused ion beam milling and subjected to microtomographic analysis. Since human tissues are composed of cells and extracellular matrices with micrometer and submicrometer structures, it is important to investigate the three-dimensional spatial resolution of microtomographs used to visualize microstructures of human tissues. The resolutions along the direction within the tomographic slice plane (in-plane resolution) and perpendicular to it (through-plane resolution) were determined from the modulation transfer function of square-wave patterns. The in-plane resolution was estimated to be 1.2 μm from the modulation transfer function of the non-zoom image. In contrast, the zoom image gave the in-plane resolution of 0.8 μm. This in-plane resolution is comparable to the through-plane resolution, which was estimated to be 0.8 μm. Although the two-dimensional radiographs were taken with the pixel width of half the X-ray optics resolution, these three-dimensional resolution analyses indicated that the zoom reconstruction should be performed to achieve the in-plane resolution comparable to the X-ray optics resolution. The submicrometer three-dimensional analysis was applied in the structural study of human cerebral tissue stained with high-Z elements and the obtained tomograms revealed that the microtomographic analysis allows visualization of the subcellular structures of the cerebral tissue.     

中子散射成像探测角分辨研究

中子散射成像技术是近年来国外正在发展的一项新型辐射成像技术, 在深空宇宙探测、核材料监控等方面具有广阔的应用前景. 角分辨是衡量该技术成像能力的一项重要参数. 研究了位置不确定度和能量分辨对角分辨的影响. 理论分析表明: 以不同角度散射, 成像的角分辨不同; 位置不确定不仅直接影响角分辨, 还通过影响能量不确定度对角分辨间接贡献; 位置分辨主要来源于探测器的结构尺寸, 当探测器尺寸小于5 cm, 影响角分辨的主要来源是能量不确定度. 利用所获得的理论结果指导设计了原理探测系统, 并对设计的原理系统开展了初步实验研究. 结果表明, 分析结果与实验得到的角分辨参数基本一致.     

具有高空间分辨力的整形环形光式差动共焦测量法

提出一种新的具有高空间分辨力的整形环形光式差动共焦测量方法。该方法通过整形环形光式共焦测量法和锐化爱里斑主瓣，改善系统横向分辨力；通过差动共焦测量法改善系统的轴向分辨力，最终达到提高系统空间分辨能力的目的。理论分析和实验表明：整形环形光内孔归一化半径ε越大，横向分辨力改善越明显，量程扩展范围越宽；当入射光波长λ=632.8nm，物镜数值孔径取NA=0.85，ε=0.5时，该系统的横向分辨力优于0.2μm，轴向分辨力优于2nm。该方法为光触针测量系统空间分辨力的提高提供了1种新的方法，可广泛应用于超精密三维微细结构工件的超精密测量。     

Acquisition and processing of backscatter data for habitat mapping - Comparison of multibeam and sidescan systems

Often marine habitat surveys use multibeam bathymetry systems to model the seafloor. This describes the morphology but not the terrain lithology or substrate. Backscatter imagery helps the interpreter to better classify the physical environment that may support a particular biological community. In this contribution, the acquisition performance of both multibeam and sidescan sonar backscatter imagery are contrasted and examples shown. The logistical factors affecting the two systems during surveying are discussed and data from both systems compared.Choice of systems for habitat mapping is discussed. A relative cost analysis of the various survey systems is presented with varying resolution and coverage. The size and shape of the footprint, and thus resolution, is variable dependant on many factors, including ship speed, data processing and sampling. The resolution and formation of imagery is important, but high sampling rates are shown not to be a complete solution as over-sampling can present a false impression of high resolution. However, it is suggested that backscatter imagery should have least 7 bit sensitivity to aid visual and digital inspection. Habitat mapping examples are shown using multibeam backscatter and sidescan sonar, where the processing has been optimised for backscatter imagery. A key question is how much of high resolution bathymetry data is essential for habitat mapping, and whether backscatter imagery can provide more of the information required at a higher resolution than a bathymetric morphology map.