Modelling the Influence of Nanoparticles in the Phase Behaviour of an Epoxy/Polystyrene Mixture, 2

The influences of nanoparticle size and concentration on the thermodynamic behaviour of epoxy/polystyrene blends are evaluated in the framework of Ginzburg's simple analytical theory. Two approaches have been employed: NPEPO (for particles coated with epoxy groups) and NPFEN (for particles coated with phenyl groups). Using NPEPO, the particles are found to prefer the phase richer in epoxy, whereas the opposite occurs for NPFEN. The particles size significantly influences blend compatibility. When the particle radius R_p is about the same size as the radius of gyration R_g of PS, the compatibility of blends increases with particle concentration, whereas for R_p > R_g, higher particle concentrations do not clearly stabilize the polymeric blends.

     

Particle size characterization by quadruple-detector hydrodynamic chromatography

Particle size and shape and their distribution directly influence a variety of end-use material properties related to packing, mixing, and transport of powders, solutions, and suspensions. Many of the techniques currently employed for particle size characterization have found limited applicability for broadly polydisperse and/or nonspherical particles. Here, we introduce a quadruple-detector hydrodynamic chromatography (HDC) method utilizing static multiangle light scattering (MALS), quasi-elastic light scattering (QELS), differential viscometry (VISC), and differential refractometry (DRI), and apply the technique to characterizing a series of solid and hollow polystyrene latexes with diameters in the approximate range of 40–400 nm. Using HDC/MALS/QELS/VISC/DRI, we were able to determine a multiplicity of size parameters and their polydispersity and to monitor the size of the particles across the elution profile of each sample. Using self-similarity scaling relationships between the molar mass and the various particle radii, we were also able to ascertain the shape of the latexes and the shape constancy as a function of particle size. The particle shape for each latex was confirmed by the dimensionless ratio ρ ≡ R _G,z /R _H,z which, in addition, provided information on the structure (compactness) of the latexes as a function of particle size. Solid and hollow polystyrene latex samples were also differentiable using these methods. Extension of this method to nonspherical, fractal objects should be possible.       

The Effect of Polydispersity on the Size of Colloidal Particles Determined by the Dynamic Light Scattering

An attempt is made to allow for a sample polydispersity while measuring particle size distribution by the dynamic light scattering. The scattering ability R(r) is calculated for monodisperse samples and samples with rectangular, bell-shaped, and triangular (increasing and decreasing) particle size distributions. It is shown that, when the processing program for the data of light bearing spectroscopy assumes a linear scale of particle sizes, the scattering ability, irrespective of the distribution pattern, is proportional to the sixth power of the particle size for the Rayleigh region and to the second power, for larger particles. However, when the scale of the half-width of the Rayleigh spectrum is linear, the pattern of the curve describing the particle scattering capability substantially changes upon passing from monodisperse to polydisperse samples. This curve can be approximated by a function R r ⁷ in the Rayleigh region and by a function R r ³ in the range of large (as compared with the wavelength) particles.     

Rapid analysis of pyrethroids in whole urine by high-performance liquid chromatography using a monolithic column and off-line preconcentration in a restricted access material cartridge

A rapid high-performance liquid chromatography (HPLC) method using a monolithic column with UV detection at 238 nm was developed for the determination of fenpropathrin, betacyfluthrin, deltamethrin, and permethrin (cis and trans isomers) in whole urine. The method is based on the use of a monolithic chromatographic column and a restricted access material (RAM) cartridge for sample preparation. The mobile phase was water/acetonitrile (42:58 v/v), the flow rate was 3 mL min^–1, and chromatographic separation was carried out in 10 min. The separation of cis and trans isomers of permethrin was also possible under the above-mentioned conditions. Detection limits in reconstituted whole urine samples were between 0.9 g L^–1 for betacyfluthrin and 4.4 g L^–1 for fenpropathrin and trans-permethrin. Recoveries for urine samples spiked with different amounts of pyrethroids (between 19 g L^–1 and 75 g L^–1) were in the 70±6 to 90±7% range.     

Preparation of the novel fluorine-18-labeled VIP analog for PET imaging studies using two different synthesis methods

Vasoactive intestinal peptide (VIP) receptors are expressed on various tumor cells in much higher density than somatostatin receptors, which provides the basis for radiolabeling VIP as tumor diagnostic agent. However, fast proteolytic degradation of VIP in vivo limits its clinical application. With the aim to develop and evaluate new ligands for depicting the VIP receptors with positron emission tomography (PET), the structure modified [R^8,15,21, L¹⁷]-VIP analog was radiolabeled with ¹⁸F using two different methods. With the first method, N-4-[¹⁸F]fluorobenzoyl-[R^8,15,21, L¹⁷]-VIP ([¹⁸F]FB-[R^8,15,21, L¹⁷]-VIP 7) was produced in a decay-corrected radiochemical yield (RCY) of 33.6 ± 3%, a specific radioactivity of 255 GBq/μmol (n = 5) within 100 min in four steps. Similarly, N-4-[¹⁸F](fluoromethyl)-benzoyl-[R^8,15,21, L¹⁷]-VIP ([¹⁸F]FMB-[R^8,15,21, L¹⁷]-VIP 8) was synthesized in a RCY of 34.85 ± 5%, a specific radioactivity of 180 GBq/μmol (n = 5) within 60 min in only one step. The two products 7 and 8 were both shown good stability in HSA. Moreover, the low bone uptakes of 7 and 8 in vivo of mice showed good defluorination stability.     

Relationships between Fe NMR, Mössbauer parameters, electrochemical properties and the structures of ferrocenylketimines

A comparative study of the electrochemical properties, ⁵⁷Fe NMR and Mössbauer spectroscopic data of compounds [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-C(R¹)N-R²}] {R¹ = H, R² = CH₂-CH₂OH (1a), CH(Me)-CH₂OH (1b), CH₂C₆H₅ (1c), C₆H₄-2Me (1d), C₆H₄-2SMe (1e) or C₆H₄-2OH (1f) and R¹ = C₆H₅, R² = C₆H₄-2Me (2d)} is reported. The X-ray crystal structure of [(η⁵-C₅H₅)Fe{(η⁵-C₅H₄)-CHN-C₆H₄-2OH}] (1f) is also described. Density functional theoretical (DFT) studies of these systems have allowed us to examine the effects induced by the substituents of the “-C(R¹)N-R²” moiety or the aryl rings (in 1d-1f) upon the electronic environment of the iron(II) centre.     

Sr4PbPt4O11, the first platinum oxide containing Pt2 ions

We report the synthesis and crystal structure of the new compound Sr₄PbPt₄O₁₁, containing platinum in highly unusual square pyramidal coordination. The crystals were obtained in molten lead oxide. The structure was solved by X-ray single crystal diffraction techniques on a twinned sample, the final R factors are R=0.0260 and wR=0.0262. The symmetry is triclinic, space group P1¯, with , , , α=90.421(3)°, β=89.773(8)°, γ=90.140(9)° and Z=2. The structure is built from dumbell-shaped Pt₂O₉ entities formed by a dinuclear metal-metal bonded Pt₂⁶⁺ ion with asymmetric environments of the two Pt atoms, classical PtO₄ square plane and unusual PtO₅ square pyramid. Successive Pt₂O₉ entities deduced from 90° rotations are connected through the oxygens of the PtO₄ basal squares to form [Pt₄O₁₀⁸⁻]_∞ columns further connected through Pb²⁺ and Sr²⁺ ions. Raman spectroscopy confirmed the peculiar platinum coordination environment.     

Phase Transition in Cs2KMnF6: Crystal Structures of Low- and High-Temperature Modifications

Crystalline Cs₂KMnF₆, when prepared below 500°C, adopts a tetragonal elpasolite structure type. Differential scanning calorimetric investigations indicated that Cs₂KMnF₆ undergoes a phase transition from the low-temperature tetragonal phase (LT) to a high-temperature phase (HT) at about 530°C. Single crystals of the new HT phase could be obtained by annealing a crystalline LT specimen at 600°C followed by rapid quenching to room temperature. In the present study the structures of both phases have been studied by single-crystal X-ray diffraction techniques. The LT phase has the tetragonal space group symmetry I4/mmm, with unit-cell parameters a=6.319(1) (a· =8.936) and c=9.257(2) Å, and Z=2. The HT phase has the cubic symmetry Fm3m, with the cell parameter a=9.067 Å and Z=4. Structural models of the LT and HT phases have been refined vs collected single-crystal X-ray reflection data to R values of 0.034 and 0.022, respectively. The uneven Mn–F bond distance distribution in the LT form, four bonds of 1.860(6) two of 2.034(9) Å, are typical for an octahedrally coordinated high-spin Mn³⁺ ion affected by Jahn–Teller effects. Due to symmetry constraints, all six octahedral Mn–F bonds in the HT form are equal to 1.931(5) Å. However, the mean square atomic displacement parameters of the fluorine atoms increases significantly from about 0.022 Ų for the LT phase to 0.042 Ų for the HT phase. The increased displacement parameters indicate that the phase transition from the LT to the HT form is associated with a directional disorder of the Jahn–Teller distortions around the Mn³⁺ ions.     

Surfactant-free emulsion polymerization of styrene using crosslinked seed particles

The aim of this research was to prepare a monodisperse polystyrene latex without surfactants adsorbed at the particle surface. Conventional polymerization formulations usually lead to large amounts of oligomers. Furthermore, they are characterized by a low reproducibility with respect to particle size. This was overcome by using a seed latex that was crosslinked in order to overcome dissolution in the monomer phase. By adjusting the seed concentration, any desired particle size in the range 0.5–1.2 m could be obtained. The monodispersity was very good.     

Stereoselective tandem iridium-catalyzed alkene isomerization-cope rearrangement of ω-diene epoxides: efficient access to acyclic 1,6-dicarbonyl compounds

The Cope rearrangement of 2,3-divinyloxiranes, a rare example of epoxide C–C bond cleavage, results in 4,5-dihydrooxepines which are amenable to hydrolysis, furnishing 1,6-dicarbonyl compounds containing two contiguous stereocenters at the 3- and 4-positions. We employ an Ir-based alkene isomerization catalyst to form the reactive 2,3-divinyloxirane in situ with complete regio- and stereocontrol, which translates into excellent control over the stereochemistry of the resulting oxepines and ultimately to an attractive strategy towards 1,6-dicarbonyl compounds.

Iridium catalyzed alkene isomerization-cope rearrangement of ω-diene epoxide furnishes 3,4-dihydrooxepines. These oxepines are hydrolyzed to diastereomerically pure 1,6-dicarbonyl compound containing two contiguous stereocenters within acyclic system.

1,6-Dicarbonyl compounds are widespread as targets and intermediates in organic synthesis.¹ Due to the “dissonant” polarizing effect induced by the two carbonyl groups,² these motifs are challenging to retrosynthetically disconnect into classical synthons. Unsurprisingly, many approaches toward 1,6-dicarbonyls rely on dimerization of α,β-unsaturated carbonyl compounds (Scheme 1a)³ or oxidative cleavage of substituted cyclohexene derivatives⁴ which significantly limits the range of possible products. Alternative strategies, such as the ring-opening of donor–acceptor cyclopropanes with enolate nucleophiles, efficiently form the 1,6-dicarbonyl skeleton, albeit with limited substrate scope (Scheme 1b).⁵ The Cope rearrangement of 1,5-dienes, featuring oxygen functionality in the 3- and 4-positions,⁶ represents a promising strategy towards 1,6-dicarbonyl compounds but suffers from lack of stereocontrol over the diene substrates, resulting in diastereomeric mixtures of products (Scheme 1c).Open in a separate windowScheme 1Selected approaches towards the formation of 1,6-dicarbonyl compounds and our proposed approach.A conceptually related approach towards the preparation of 1,6-dicarbonyl compounds is through the hydrolysis of 3,4-dihydrooxepines (Scheme 1d), which are in turn generated through the Cope rearrangement of 2,3-divinyloxiranes.⁷ Such a sigmatropic rearrangement is also noteworthy as a rare example where an epoxide C–C bond is selectively cleaved over the usually more reactive C–O bond. This intriguing rearrangement has been studied but its use in synthesis is scarce, presumably due to difficulties in the stereoselective synthesis and handling of the key divinyl epoxides.In line with our interest in the strategic application of alkene isomerization to generate reactive synthetic intermediates in stereodefined form,⁸ we posited to form the reactive 2,3-divinyloxiranes in situ, through alkene isomerization^9,10 of the simpler allyl epoxides, which are accessible in enantiomerically enriched form.¹¹ Such a strategy might greatly facilitate access to these intermediates and therefore uncover a synthetically attractive route toward 1,6-dicarbonyl compounds featuring two contiguous stereocenters.With this idea in mind, we first explored the isomerization and subsequent Cope rearrangement of allyl-vinyl epoxides 1 (Scheme 2). To induce isomerization, we employed a cationic iridium-based catalytic system,¹² which is known to reliably isomerize alkenes with high degrees of regio- and stereocontrol.¹³Open in a separate windowScheme 2Substrate scope for the tandem iridium-catalyzed alkene isomerization-Cope rearrangement of allyl-vinyl epoxides.In line with our expectations, our model substrate 1a (R² = R³ = H, R⁴ = Me, R⁵ = CO₂Et) was smoothly isomerized at 65 °C in the presence of 1.5 mol% of Ir dimer to obtain the corresponding divinyl epoxide with a complete E-selectivity. With suitable conditions for alkene isomerization in hand, we exposed substrate 1a to the Ir-based catalytic system at 120 °C and were equally pleased to observe the 4,5-dihydrooxepine product 2a, resulting from the tandem isomerization-Cope rearrangement as a single diastereoisomer in 81% yield. We proceeded to test the generality of our protocol with respect to different alkene and epoxide substitution patterns. Pleasingly, product 2b was generated with complete stereoselectivity, showcasing the compatibility of the reaction conditions with potentially labile tertiary stereocenters α to the ester group. We then wondered whether the anti-diastereomer could be accessed starting from the corresponding cis allyl-vinyl epoxide. Indeed, in line with the known stereospecific behavior of the Cope rearrangement, we obtained the complementary diastereomer 2c. Turning our attention to more highly substituted epoxides, we were pleased to observe the formation of dihydrooxepines 2d and 2e, which correspond to 1,6-keto-aldehyde and diketone products, respectively. Substrate 1f (R² = R⁴ = R⁵ = H, R³ = Ph), which features an unactivated vinyl group, also underwent the rearrangement, demonstrating that an activated alkenyl group is not required for a successful outcome. Similarly, product 2g featuring two alkyl groups is also generated, with high diastereoselectivity albeit in moderate yield. Products featuring ethyl and methyl ester 2h, 2i could also be obtained in good yields and diastereoselectivity. We next tested substrate 1j (R² = Me, R³ = Ph, R⁴ = CH₂CH₂Ph, R⁵ = H), as a geometric-mixture of the double bond (E : Z = 1.1 : 1) and in accordance with the stereospecificity of the process, the oxepine 2j was obtained as a mixture of two diastereomers with the same ratio. Disappointingly, substrate 1k did not undergo isomerization, presumably due to the Lewis basic nature of the ketone, likely poisoning the Ir-catalyst.During our study, we noticed that allyl-vinyl epoxides bearing electron donating groups on the vinyl moiety tend to decompose during purification by column chromatography on silica gel. This obstacle further motivated us to explore diallyl epoxides 3 as substrates, where the reactive divinyl epoxide would be generated by isomerization of both allyl fragments. Notably, these diallyl epoxides are much more stable compared to their vinyl counterparts and can be readily prepared in two steps from simple alkynes.¹⁴ To our delight, diallyl epoxide 3a (R = CH₂OMe) smoothly underwent the double isomerization-Cope rearrangement cascade at 140 °C, furnishing oxepine 2l with impressive yield and diastereoselectivity (Scheme 3). The use of alkene isomerization to form the reactive divinyl epoxide in situ avoids the isolation of the unstable divinyl epoxide, while controlling the stereochemistry of both double bonds, particularly not trivial to achieve using classical olefination reactions. Products 2m and 2n feature ester and silyl groups, highlighting the functional group tolerance of the catalytic system.Open in a separate windowScheme 3Substrate scope for tandem iridium-catalyzed double alkene isomerization-Cope rearrangement of diallyl epoxides.Our next objective was to hydrolyze the diastereomerically pure oxepines obtained through the rearrangement in a stereoretentive fashion, revealing the acyclic 1,6-dicarbonyl motif. Pleasingly, diversely substituted oxepines 2 underwent smooth hydrolysis either using 5 mol% of Pd(MeCN)₂Cl₂¹⁵ at 50 °C or an acidic aqueous solution to form 1,6-dicarbonyls 4 in diastereomerically pure form (Scheme 4).¹⁶ Dicarbonyl products featuring labile tertiary centers 4a and 4b are formed under these conditions with excellent diastereoselectivities and yields. Without surprise, oxepine 2f (R² = R⁴ = R⁵ = H, R³ = Ph) furnished the keto-substituted product 4c in good yield. The relative stereochemistry of 4b was unambiguously confirmed by single crystal X-ray diffraction analysis of the corresponding carboxylic acid 7 (Scheme 4b).¹⁷ The reaction is scalable to ½ gram of substrate and could be performed in a single-pot operation without isolation of the intermediate oxepine (Scheme 4b). By using this approach, 1h provides 4b in 61% yield as a single diastereomer, underlining the synthetic potential and efficiency of this method.Open in a separate windowScheme 4Hydrolysis of oxepines and one-pot sequence.     

Particle size measurements of heterogeneous film-forming latexes

Two-phase latex particles consisting of mainly polystyrene (PS) and polyisoprene (PI) in ratios varying from 7030 to 2080 were prepared using different polymerization techniques. Methacrylic acid (MAA) was used in small amounts as a comonomer. The latexes had narrow size distributions, and showed different particle morphologies depending on the monomer composition and the polymerization conditions used. In most cases the latexes were filmforming at room temperature. Particle size distributions and average particle sizes of the latexes have been determined using different particle sizing methods.Size determination by TEM was performed after staining with osmium tetroxide (OsO₄) or uranyl acetate (UAc). The staining methods showed no significant differences in particle size averages and particle size distributions when the ratio between the PI and PS phase did not exceed 5050. At higher phase ratios OsO₄ staining was preferred. The glass transition temperature of the PI phase increased after OsO₄ staining, which prevented deformation of the latex particles. Particle morphologies for the heterogeneous latex particles were also determined after OsO₄ staining.Particle sizes measured by TEM were generally smaller than the corresponding sizes measured by quasielastic light scattering (QELS). The difference in the measured diameters increased with increasing PI and PMAA content in the latex particles. The larger sizes observed by QELS are results of the presence of an immobilized water layer surrounding the particles in the aqueous environment, water absorption and swelling due to the presence of carboxylic acid groups, and adsorption of soluble carboxylated polymers forming a hydrophilic corona around the particles. By TEM the hard sphere diameters of dehydrated particles are measured.     

Structure and thermodynamic aspects of macrobicyclic polyether-metal ion interactions

The crystals structure of a K⁺-diptychand-15C5-18C6 iodide complex has been determined from X-ray data. The complexed bicyclic molecule crystallizes in the triclinic space group witha = 9.995(4) Å,b = 10.097(4) Å,c = 13.725(6) Å, = 90.12(3)°, = 93.62(4)°, = 97.56(3)°. The structure was solved using heavy atom methods and refined toR = 0.032 for 3262 independent reflections. In the crystal structure, the K⁺ lies between the two crown ether rings, and is coordinated by the nine donor atoms of the ligand molecule. The complexation properties of the ligand with K⁺ and Na⁺ were studied by titration calorimetry in 90% (v/v) MeOH/H₂O solution. The studies indicate the formation of 1 : 1 ligand : metal ion complexes in both solid state and solution.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Ruthenium(ii) complexes with tetra-15-crown-5-phthalocyanine: synthesis and spectroscopic investigation

The ruthenium complexes with tetra-15-crown-5-phthalocyanine and various axial ligands were synthesized and characterized by spectroscopy. A method for the synthesis of bisaxially coordinated ruthenium(ii) tetra-15-crown-5-phthalocyaninates with the N-donor ligands (R₄Pc)Ru(L₂) (R₄Pc^2– = [4,5,4",5",4,5,4,5-tetrakis(1,4,7,10,13-pentaoxotridecamethylene)phthalocyaninate-ion], L is trimethylamine (Me₃N), pyridine (py), isoquinoline (iqnl), triethylamine (Et₃N), pyrazine (pyz)) was developed. The preparation technique involves selective decarbonylation of (R₄Pc)Ru(CO)(MeOH) on treatment with Me₃NO in excess N-donor solvent.     

123Sb NQR and 19F NMR study of potassium,rubidium, and cesium heptafluorodiantimonates(iii)

The dynamics of crystal lattices of potassium, rubidium, and cesium heptafluorodiantimonates(iii) and specific features of internal rotations of the Sb₂F₇ fluoride groups in these compounds were studied using ¹²³Sb NQR in the temperature interval from 77 to 325 K and ¹⁹F NMR in the temperature interval from 240 to 470 K in combination with X-ray diffraction and thermogravimetric analyses. The distinctions in the dynamic behavior of the fluoride ions with changing the size (polarizability) of outer-sphere cations are discussed. The structural phase transition in CsSb₂F₇ was revealed at 425—430 K accompanied by the appearance of a high ion conductivity ( 1.3·10^–3 S cm^–1 at 450 K). A second type phase change can exist at 220—270 K.     

The crystal structure of dibenzo-14-crown-4, a preorganized basis of square pyramid coordination for lithium ions

Dibenzo-14-crown-4 (DB14C4) has a high selectivity for Li⁺. The rigidity of the molecule caused by the two benzene rings suggests that this is a preorganized ligand for metal ions and particularly for Li⁺. A single crystal structure study of the molecule was performed. The crystal data are: space groupP2₁,a = 12.811(2),b = 5.106(1),c = 12.816(3)Å, = 115.44(1)°,V = 757.0(2)ų withZ = 2. The structure was refined toR = 0.049 andR _w, = 0.058 using 1804 unique data withF < 4(F). The conformation of the free ligand was found to be similar to that of the complexed ligand and the conformational parameters of the free ligand and its derivatives are compared to Li⁺ complexes of the ligand and its derivatives.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

The stereochemistry of a nine-membered ring analogue of nefopam,a nonnarcotic analgesic drug

The solid-state structure of a (±)-homonefopam hydrogenfumarate salt having an-O(CH₂)₃N-fragment was determined by single-crystal X-ray diffraction analysis. Homonefopam hydrogenfumarate gave crystals belonging to the monoclinicP2₁/c space group, and at ambient temperaturea=10.220(1),b=18.187(2),c=10.687(2)A,=94.43(1),V=1980.5(5)å³ Z=4,R(F)=0.039,R _w =0.039,R _W (F)=0.025. The¹H NMR spectrum of homonefopam hydrochloride in CD₂Cl₂ solution showed two species (7:1 ratio) at the prototropic shift-nitrogen inversion slow exchange limit. The solution-state major species has the same conformation andtrans-to-phenyl axial N-methyl disposition found in the crystal as evidenced by three antiperiplanar vicinal³ J (HH) coupling constants in the oxytrimethyleneamino fragment and vicinal coupling constants involving theN-H proton. TheR-ratio method was used to estimate 64(2) O-C(3)-C(4)-C(5) and 75(3) C(3)-C(4)-C(5)-N(6) dihedral angles for the major species in CD₂Cl₂ solution in accord with its proposed structure. The finding of C(3)-C(4) bond time-averaged magnitude³ J (HH) values and severe broadening of signals from other minor species protons suggests conformational heterogeneity for the solution-state minor species.     

Dielectric properties of cleaned and monodisperse polystyrene latexes in microwaves

The dielectric behavior (, ) of three well-cleaned monodisperse polystyrene latexes having the same particle size and the same number of chemically-bound surface groups has been studied at a fixed microwave frequency (9.4 GHz), as a function of temperature and surface group (SO ₄ ^– , COO^–, OH).A large dielectric relaxation was observed in the sulfate-stabilized latex, which has the most polar surface end-group. The anomalous behavior in the thermal dependence of the hydroxyl and carboxyl-stabilized latexes (the OH latex being more pronounced than the COO^– latex) may originate from differences in the experimental conditions used for the preparation of such polymer colloids, or due to the presence of ionic species.On the basis of various dielectric models, the apparent volume fractions of the latexes were calculated. The amount of bound water around the latex particle was quantitatively correlated to the polarity of surface end-group (SO ₄ ^– > COO^– > OH). The differences between the calculated and actual values were not only a reflection of the thickness of vicinal water, but could also be indicative of the presence of oligomeric species in the suspension's medium (serum) of the latex. The permittivities of hydrated particle and of bound water were obtained with a non-linear iterative procedure.     

Formation of closo-rhodacarboranes containing η2,η3-(CH2=CHC5H6) ligand in the reaction of μ-dichloro-bis[(η4-norbornadiene)rhodium] with nido-dicarbaundecaborates [K][nido-7-R1-8-R2-7,8-C2B9H10]

The reactions of a complex [(⁴-C₇H₈)RhCl]₂ (C₇H₈ is norbornadiene) with salts of substituted nido-dicarbaundecaborates, [K][nido-7-R¹-8-R²-7,8-C₂B₉H₁₀] (R¹ = R² = H (a); R¹ = R² = Me (b); R¹, R² = 1,2-(CH₂)₂C₆H₄ (c); R¹ = Me, R² = Ph (d)), in CH₂Cl₂ afforded new closo-(²,³-(4-vinylcyclopenten-3-yl))rhodacarboranes. The structures of the compounds were studied by multinuclear NMR spectroscopy. A probable mechanism of the rearrangement of the norbornadiene ligand is discussed.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1875–1878, September, 2004.     

Salicylaldehydo chelates of bis(cyclopentadienyl) zirconium(IV)

A new series of organometallic ionic chelates of the type [Cp ₂Zr(sal)]⁺ [ROCS₂/RRNCS₂]^–, where Hsal = salicylaldehyde;R =Me, Et, i-Pr ori-Bu andR =R =Me, Et, i-Pr;R =Me,R = benzyl orR =Et,R =m-tolyl, have been synthesized in aqueous medium by the reaction of [Cp ₂Zr(sal)]⁺Cl^– andROCS ₂ ^– K⁺/RRNCS ₂ ^– Na⁺. These compounds have been characterized by chemical analyses, electrical conductance, electronic, IR and¹H-NMR spectral studies. These studies indicate that the complexes are 1:1 electrolytes and the salicylaldehyde ligand is chelating in all these complexes. Therefore, a tetrahedral coordination about the zirconium atom is proposed.

---

Salicylaldehydo-Chelate von Bis(cyclopentadienyl)-zirkonium(IV)

Zusammenfassung Eine neue Gruppe von organometallischen ionischen Chelaten vom Typ [Cp ₂Zr(sal)]⁺ [ROCS₂/RRNCS₂]^– (mit Hsal = Salicyladehyd;R =Me, Et, i-Pr oderi-Bu undR =R =Me, Et, i-Pr;R =Me,R = Benzyl oderR =Et,R =m-Tolyl) wurde in wäßrigem Medium mittels der Reaktion von [Cp ₂Zr(sal)]⁺Cl^– mitROCS ₂ ^– K⁺/RRNCS ₂ ^– Na⁺ hergestellt. Die erhaltenen Verbindungen wurden mittels chemischer Analyse, elektrischer Leitfähigkeit und der IR- sowie¹H-NMR-Spektren charakterisiert. Diese Untersuchungen zeigen, daß die Komplexe 1:1-Elektrolyte sind, wobei der Salicylaldehyd-Ligand in allen Fällen an der Chelatbildung beteiligt ist. Es wird daher für das Zirkoniumatom eine tetrahedrale Koordination vorgeschlagen.