Existence of fast traveling waves for some parabolic equations: A dynamical systems approach

We study semilinear elliptic equationsu + cu _x =f(u,u) and ² u + cu _x =f(u,u, ² u) in infinite cylinders (x,y) × ⁿ⁺¹ using methods from dynamical systems theory. We construct invariant manifolds, which contain the set of bounded solutions and then study a singular limitc, where the equations change type from elliptic to parabolic. In particular we show that on the invariant manifolds, the elliptic equation generates a smooth dynamical system, which converges to the dynamical system generated by the parabolic limit equation. Our results imply the existence of fast traveling waves for equations like a viscous reactive 2d-Burgers equation or the Cahn-Hillard equation in infinite strips.     

Extended approaches to covariant Maxwell electrodynamics

The field equations of covariant Maxwell electrodynamics are a set I of 8 equations for the determination of 6 variables, i.e., the independent components of the skew-symmetric Maxwell tensorF . Obviously 2 of these equations are not evolutive; however they cannot be eliminated without losing manifest covariance. This paper presents a new hyperbolic set S of 8 equations in the 8 variablesF ,x, y, wherex, y are new auxiliary quantities. The solutions of S withx =y = 0 are those of the set I. Moreover, S is expressed in covariant form and is equivalent to a symmetric hyperbolic system.     

Two-phase flow in heterogeneous porous media II: Numerical experiments for flow perpendicular to a stratified system

In this work, we make use of numerical experiments to explore our original theoretical analysis of two-phase flow in heterogeneous porous media (Quintard and Whitaker, 1988). The calculations were carried out with a two-region model of a stratified system, and the parameters were chosen be consistent with practical problems associated with groundwater flows and petroleum reservoir recovery processes. The comparison between theory (the large-scaled averaged equations) and experiment (numerical solution of the local volume averaged equations) has allowed us to identify conditions for which the quasi-static theory is acceptable and conditions for which a dynamic theory must be used. Byquasi-static we mean the following: (1) The local capillary pressure,everywhere in the averaging volume, can be set equal to the large-scale capillary pressure evaluated at the centroid of the averaging volume and (2) the large-scale capillary pressure is given by the difference between the large-scale pressures in the two immiscible phases, and is therefore independent of gravitational effects, flow effects and transient effects. Bydynamic, we simply mean a significant departure from the quasi-static condition, thus dynamic effects can be associated with gravitational effects, flow effects and transient effects. To be more precise about the quasi-static condition we need to refer to the relation between the local capillary pressure and the large-scale capillary pressure derived in Part I (Quintard and Whitaker, 1990). Herep _c ¦_y represents the local capillary pressure evaluated at a positiony relative to the centroid of the large-scale averaging volume, and {p _c }¦_x represents the large-scale capillary pressure evaluated at the centroid.In addition to{p _c } ^c being evaluated at the centroid, all averaged terms on the right-hand side of Equation (1) are evaluated at the centroid. We can now write the equations describing the quasi-static condition as , , This means that the fluids within an averaging volume are distributed according to the capillary pressure-saturation relationwith the capillary pressure held constant. It also means that the large-scale capillary pressure is devoid of any dynamic effects. Both of these conditions represent approximations (see Section 6 in Part I) and one of our main objectives in this paper is to learn something about the efficacy of these approximations. As a secondary objective we want to explore the influence of dynamic effects in terms of our original theory. In that development only the first four terms on the right hand side of Equation (1) appeared in the representation for the local capillary pressure. However, those terms will provide an indication of the influence of dynamic effects on the large-scale capillary pressure and the large-scale permeability tensor, and that information provides valuable guidance for future studies based on the theory presented in Part I.Roman Letters A scalar that maps {}*/t onto - A scalar that maps {}*/t onto - A interfacial area between the -region and the -region contained within, m² - A interfacial area between the -region and the -region contained within, m² - A interfacial area between the -region and the -region contained within, m² - a vector that maps ({}*/t) onto , m - a vector that maps ({}*/t) onto , m - b vector that maps ({p}– g) onto , m - b vector that maps ({p}– g) onto , m - B second order tensor that maps ({p}– g) onto , m² - B second order tensor that maps ({p}– g) onto , m² - c vector that maps ({}*/t) onto , m - c vector that maps ({}*/t) onto , m - C second order tensor that maps ({}*/t) onto , m² - C second order tensor that maps ({}*/t) onto . m² - D third order tensor that maps ( ) onto , m - D third order tensor that maps ( ) onto , m - D second order tensor that maps ( ) onto , m² - D second order tensor that maps ( ) onto , m² - E third order tensor that maps () onto , m - E third order tensor that maps () onto , m - E second order tensor that maps () onto - E second order tensor that maps () onto - p _c =(), capillary pressure relationship in the-region - p _c =(), capillary pressure relationship in the-region - g gravitational vector, m/s² - largest of either or - - - i unit base vector in thex-direction - I unit tensor - K local volume-averaged-phase permeability, m² - K local volume-averaged-phase permeability in the-region, m² - K local volume-averaged-phase permeability in the-region, m² - {K } large-scale intrinsic phase average permeability for the-phase, m² - K –{K }, large-scale spatial deviation for the-phase permeability, m² - K –{K }, large-scale spatial deviation for the-phase permeability in the-region, m² - K –{K }, large-scale spatial deviation for the-phase permeability in the-region, m² - K ^* large-scale permeability for the-phase, m² - L characteristic length associated with local volume-averaged quantities, m - characteristic length associated with large-scale averaged quantities, m - I _i i = 1, 2, 3, lattice vectors for a unit cell, m - l characteristic length associated with the-region, m - ; characteristic length associated with the-region, m - l _H characteristic length associated with a local heterogeneity, m - - n unit normal vector pointing from the-region toward the-region (n =–n ) - n unit normal vector pointing from the-region toward the-region (n =–n ) - p pressure in the-phase, N/m² - p local volume-averaged intrinsic phase average pressure in the-phase, N/m² - {p } large-scale intrinsic phase average pressure in the capillary region of the-phase, N/m² - p local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m² - p local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m² - p –{p }, large scale spatial deviation for the-phase pressure, N/m² - p –{p }, large scale spatial deviation for the-phase pressure in the-region, N/m² - p –{p }, large scale spatial deviation for the-phase pressure in the-region, N/m² - P _c p –{p }, capillary pressure, N/m² - {p_c}^c large-scale capillary pressure, N/m² - r ₀ radius of the local averaging volume, m - R ₀ radius of the large-scale averaging volume, m - r position vector, m - , m - S /, local volume-averaged saturation for the-phase - S ^* {}*{}*, large-scale average saturation for the-phaset time, s - t time, s - u , m - U , m² - v -phase velocity vector, m/s - v local volume-averaged phase average velocity for the-phase in the-region, m/s - v local volume-averaged phase average velocity for the-phase in the-region, m/s - {v } large-scale intrinsic phase average velocity for the-phase in the capillary region of the-phase, m/s - {v } large-scale phase average velocity for the-phase in the capillary region of the-phase, m/s - v –{v }, large-scale spatial deviation for the-phase velocity, m/s - v –{v }, large-scale spatial deviation for the-phase velocity in the-region, m/s - v –{v }, large-scale spatial deviation for the-phase velocity in the-region, m/s - V local averaging volume, m³ - V volume of the-phase in, m³ - V large-scale averaging volume, m³ - V capillary region for the-phase within, m³ - V capillary region for the-phase within, m³ - V _c intersection of m³ - V volume of the-region within, m³ - V volume of the-region within, m³ - V () capillary region for the-phase within the-region, m³ - V () capillary region for the-phase within the-region, m³ - V () , region in which the-phase is trapped at the irreducible saturation, m³ - y position vector relative to the centroid of the large-scale averaging volume, m Greek Letters local volume-averaged porosity - local volume-averaged volume fraction for the-phase - local volume-averaged volume fraction for the-phase in the-region - local volume-averaged volume fraction for the-phase in the-region - local volume-averaged volume fraction for the-phase in the-region (This is directly related to the irreducible saturation.) - {} large-scale intrinsic phase average volume fraction for the-phase - {} large-scale phase average volume fraction for the-phase - {}* large-scale spatial average volume fraction for the-phase - –{}, large-scale spatial deviation for the-phase volume fraction - –{}, large-scale spatial deviation for the-phase volume fraction in the-region - –{}, large-scale spatial deviation for the-phase volume fraction in the-region - a generic local volume-averaged quantity associated with the-phase - mass density of the-phase, kg/m³ - mass density of the-phase, kg/m³ - viscosity of the-phase, N s/m² - viscosity of the-phase, N s/m² - interfacial tension of the - phase system, N/m - , N/m - , volume fraction of the-phase capillary (active) region - , volume fraction of the-phase capillary (active) region - , volume fraction of the-region ( + =1) - , volume fraction of the-region ( + =1) - {p }– g, N/m³ - {p }– g, N/m³     

A general model for the effective viscosity of pseudoplastic and dilatant fluids

Summary A new and very general expression is proposed for correlation of data for the effective viscosity of pseudoplastic and dilatant fluids as a function of the shear stress. Most of the models which have been proposed previously are shown to be special cases of this expression. A straightforward procedure is outlined for evaluation of the arbitrary constants.

---

Zusammenfassung Eine neue und sehr allgemeine Formel wird für die Korrelation der Werte der effektiven Viskosität von strukturviskosen und dilatanten Flüssigkeiten in Abhängigkeit von der Schubspannung vorgeschlagen. Die meisten schon früher vorgeschlagenen Methoden werden hier als Spezialfälle dieser Gleichung gezeigt. Ein einfaches Verfahren für die Auswertung der willkürlichen Konstanten wird beschrieben.

---

Nomenclature b arbitrary constant inSisko model (eq. [5]) - n arbitrary exponent in eq. [1] - x independent variable - y(x) dependent variable - y ₀(x) limiting behavior of dependent variable asx 0 - y(x) limiting behavior of dependent variable asx - z original dependent variable - arbitrary constant inSisko model (eq. [5]) andBird-Sisko model (eq. [6]) - arbitrary exponent in eqs. [2] and [8] - effective viscosity = shear stress/rate of shear - _A effective viscosity at = _A - _B empirical constant in eqs. [2] and [8] - ₀ limiting value of effective viscosity as 0 - ₀() limiting behavior of effective viscosity as 0 - limiting value of effective viscosity as - () limiting behavior of effective viscosity as - rate of shear - arbitrary constant inBird-Sisko model (eq.[6]) - shear stress - _A arbitrary constant in eqs. [2] and [8] - ₀ shear stress at inBingham model - _1/2 shear stress at = ( ₀ + )/2 With 8 figures     

Filament stretching equation in Lagrangian coordinates

The general integral of the very simple equation ^21/n/() was found to describe the cross sectional area of filaments of isothermal power law fluids while in transient stretching where is time and is the initial location of fluid molecules at time = 0 given as the distance from a reference point fixed in space. Any such stretching transient given as a solution of the above equation is physically realizable subject to the restrictions > 0 and/ < 0.     

On an inversion theorem for conical regions in elasticity theory

Summary Two-dimensional stress singularities in wedges have already drawn attention since a long time. An inverse square-root stress singularity (in a 360° wedge) plays an important role in fracture mechanics.Recently some similar three-dimensional singularities in conical regions have been investigated, from which one may be also important in fracture mechanics.Spherical coordinates are r, , . The conical region occupied by the elastic homogeneous body (and possible anisotropic) has its vertex at r=0. The mantle of the cone is described by an arbitrary function f(, )=0. The displacement components be u. For special values of (eigenvalues) there exist states of displacements (eigenstates) % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqef0uAJj3BZ9Mz0bYu% H52CGmvzYLMzaerbd9wDYLwzYbItLDharqqr1ngBPrgifHhDYfgasa% acOqpw0xe9v8qqaqFD0xXdHaVhbbf9v8qqaqFr0xc9pk0xbba9q8Wq% Ffea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8frFve9Fve9Ff0dme% GabaqaaiGacaGaamqadaabaeaafiaakabbaaa6daaahjxzL5gapeqa% aiaadwhadaWgaaWcbaGaeqOVdGhabeaakiabg2da9iaadkhadaahaa% WcbeqaaiabeU7aSbaakiaadAgadaWgaaWcbaGaeqOVdGhabeaakiaa% cIcacqaH7oaBcaGGSaGaeqiUdeNaaiilaiabfA6agjaacMcaaaa!582B!\[u_\xi = r^\lambda f_\xi (\lambda ,\theta ,\Phi )\],which may satisfy rather arbitrary homogeneous boundary conditions along the generators.The paper brings a theorem which expresses that if is an eigenvalue, then also-1- is an eigenvalue. Though the theorem is related to a known theorem in Potential Theory (Kelvin's theorem), the proof has to be given along quite another line.

---

Zusammenfassung Zwei-dimensionale Spannungssingularitäten in keilförmigen Gebieten sind schon längere Zeit untersucht worden und neuerdings auch ähnliche drei-dimensionale Singularitäten in konischen Gebieten.Kugelkoordinaten sind r, , . Das konische Gebiet hat seine Spitze in r=0. Der Mantel des Kegels lässt sich beschreiben mittels einer willkürlichen Funktion f(, )=0. Die Verschiebungskomponenten seien u. Für spezielle Werte von (Eigenwerte) bestehen Verschiebunszustände % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqef0uAJj3BZ9Mz0bYu% H52CGmvzYLMzaerbd9wDYLwzYbItLDharqqr1ngBPrgifHhDYfgasa% acOqpw0xe9v8qqaqFD0xXdHaVhbbf9v8qqaqFr0xc9pk0xbba9q8Wq% Ffea0-yr0RYxir-Jbba9q8aq0-yq-He9q8qqQ8frFve9Fve9Ff0dme% GabaqaaiGacaGaamqadaabaeaafiaakabbaaa6daaahjxzL5gapeqa% aiaadwhadaWgaaWcbaGaeqOVdGhabeaakiabg2da9iaadkhadaahaa% WcbeqaaiabeU7aSbaakiaadAgadaWgaaWcbaGaeqOVdGhabeaakiaa% cIcacqaH7oaBcaGGSaGaeqiUdeNaaiilaiabfA6agjaacMcaaaa!582B!\[u_\xi = r^\lambda f_\xi (\lambda ,\theta ,\Phi )\],welche homogene Randwerte der Beschreibenden des Kegels entlang genügen.Das Bericht bringt ein Theorem, welches aussagt, das und =–1– beide Eigenwerte sind.

     

LDA measurements in low Reynolds number turbulent boundary layer

LDA measurements of the mean velocity in a low Reynolds number turbulent boundary layer allow a direct estimate of the friction velocity U from the value of /y at the wall. The trend of the Reynolds number dependence of / is similar to the direct numerical simulations of Spalart (1988).     

On the effects of a periodic, spanwise variation of suction upon asymptotic suction flow

Summary The effects of superposing streamwise vorticity, periodic in the lateral direction, upon two-dimensional asymptotic suction flow are analyzed. Such vorticity, generated by prescribing a spanwise variation in the suction velocity, is known to play an important role in unstable and turbulent boundary layers. The flow induced by the variation has been obtained for a freestream velocity which (i) is steady, (ii) oscillates periodically in time, (iii) changes impulsively from rest. For the oscillatory case it is shown that a frequency can exist which maximizes the induced, unsteady wall shear stress for a given spanwise period. For steady flow the heat transfer to, or from a wall at constant temperature has also been computed.Nomenclature (x, y, z) spatial coordinates - (u, v, w) corresponding components of velocity - (, , ) corresponding components of vorticity - t time - stream function for v and w - v _w mean wall suction velocity - nondimensional amplitude of variation in wall suction velocity - characteristic wavenumber for variation in direction of z - T temperature - P pressure - density - coefficient of kinematic viscosity - coefficient of thermal diffusivity - (/v _w)² - frequency of oscillation of freestream velocity - nondimensional amplitude of freestream oscillation - /v _w ² - z z - y –v _w y/ - v _w ² t/4 - /v _w - U ₀ characteristic freestream velocity - u/U ₀ - coefficient of viscosity - _w wall shear stress - Prandtl number (/) - q heat transfer to wall - T _w wall temperature - T (T _w–T)/(T _w–)     

Analysis of suddenly started laminar flow in the entrance region of a circular tube

Suddenly started laminar flow in the entrance region of a circular tube, with constant inlet velocity, is investigated analytically by using integral momentum approach. A closed form solution to the integral momentum equation is obtained by the method of characteristics to determine boundary layer thickness, entrance length, velocity profile, and pressure gradient.Nomenclature M(, , ) a function - N(, , ) a function - p pressure - p* p/1/2U ², dimensionless pressure - Q(, , ) a function - R radius of the tube - r radial distance - Re 2RU/, Reynolds number - t time - U inlet velocity, constant for all time, uniform over the cross section - u velocity in the boundary layer - u* u/U, dimensionless velocity - u ₁ velocity in the inviscid core - x axial distance - y distance perpendicular to the axis of the tube - y* y/R, dimensionless distance perpendicular to the axis - boundary layer thickness - * displacement thickness - /R, dimensionless boundary layer thickness - momentum thickness - absolute viscosity of the fluid - /, kinematic viscosity of the fluid - x/(R Re), dimensionless axial distance - density of the fluid - tU/(R Re), dimensionless time - _w wall shear stress     

Transport in ordered and disordered porous media II: Generalized volume averaging

In this paper we develop the averaged form of the Stokes equations in terms of weighting functions. The analysis clearly indicates at what point one must choose a media-specific weighting function in order to achieve spatially smoothed transport equations. The form of the weighting function that produces the cellular average is derived, and some important geometrical theorems are presented.Roman Letters A interfacial area of the- interface associated with the local closure problem, m² - A _e area of entrances and exits for the-phase contained within the averaging system, m² - A _p surface area of a particle, m² - d _p 6V _p/A_p, effective particle diameter, m - g gravity vector, m/s² - I unit tensor - K _m permeability tensor for the weighted average form of Darcy's law, m² - L general characteristic length for volume averaged quantities, m - L _p general characteristic length for volume averaged pressure, m - L characteristic length for the porosity, m - L _v characteristic length for the volume averaged velocity, m - l characteristic length (pore scale) for the-phase - l _i i=1, 2, 3 lattice vectors, m - (y) weighting function - m(–y) (y), convolution product weighting function - _v special weighting function associated with the traditional averaging volume - m _v special convolution product weighting function associated with the traditional averaging volume - m _g general convolution product weighting function - m _V unit cell convolution product weighting function - m _C special convolution product weighting function for ordered media which produces the cellular average - m _D special convolution product weighting function for disordered media - m _M master convolution product weighting function for ordered and disordered media - n unit normal vector pointing from the-phase toward the-phase - p pressure in the-phase, N/m² - p_m superficial weighted average pressure, N/m² - p _m intrinsic weighted average pressure, N/m² - p traditional intrinsic volume averaged pressure, N/m² - p p p _m , spatial deviation pressure, N/m² - r ₀ radius of a spherical averaging volume, m - r _m support of the convolution product weighting function, m - r position vector, m - r position vector locating points in the-phase, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ - V _cell volume of a unit cell, m³ - V velocity vector in the-phase, m/s - vm superficial weighted average velocity, m/s - v _m intrinsic weighted average velocity, m/s - V volume of the-phase contained in the averaging volume, m³ - V _p volume of a particle, m³ - v traditional superficial volume averaged velocity, m/s - v v p _m spatial deviation velocity, m/s - x position vector locating the centroid of the averaging volume or the convolution product weighting function, m - y position vector relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - _m m * . weighted average porosity - mass density of the-phase, kg/m³ - viscosity of the-phase, Ns/m² - V /V, volume fraction of the-phase     

Das erweiterte Korrespondenzgesetz für die dynamische Idealviskosität und die Idealwärmeleitfähigkeit reiner Stoffe

Zusammenfassung Zur Berechnung der dynamischen Idealviskosität Ideal (T) und der Idealwärmeleitfähigkeit ideal (T) benötigt man die kritische TemperaturT _kr, das kritische spezifische Volum _kr, die MolmasseM, den kritischen Parameter _kr und die molare isochore WärmekapazitätC _v(T). Sowohl das theoretisch, als auch das empirisch abgeleitete erweiterte Korrespondenzgesetz ergeben eine für praktische Zwecke ausreichende Genauigkeit für die Meßwertwiedergabe, die bei den assoziierenden Stoffen und den Quantenstoffen jedoch geringer ist als bei den Normalstoffen.

---

The extended correspondence law for the ideal dynamic viscosity and the ideal thermal conductivity of pure substances

For the calculation of the ideal dynamic viscosity Ideal (T) and the ideal thermal conductivity ideal (T) the critical temperatureT _kr, the critical specific volumev _kr, the molecular massM, the critical parameter _kr, and the molar isochoric heat capacityC _v(T) is needed. Not only the theoretically determined but also the empirically determined extended correspondence law gives for practical use a good representation of the measured data, which for the associating substances and the quantum substances is not so good as for the normal substances.

     

Time-resolved, 3D, laser-induced fluorescence measurements of fine-structure passive scalar mixing in a tubular reactor

A three-dimensional, time-resolved, laser-induced fluorescence (3D-LIF) technique was developed to measure the turbulent (liquid-liquid) mixing of a conserved passive scalar in the wake of an injector inserted perpendicularly into a tubular reactor with Re=4,000. In this technique, a horizontal laser sheet was traversed in its normal direction through the measurement section. Three-dimensional scalar fields were reconstructed from the 2D images captured at consecutive, closely spaced levels by means of a high-speed CCD camera. The ultimate goal of the measurements was to assess the downstream development of the 3D scalar fields (in terms of the full scalar gradient vector field and its associated scalar energy dissipation rate) in an industrial flow with significant advection velocity. As a result of this advection velocity, the measured 3D scalar field is artificially skewed during a scan period. A method to correct for this skewing was developed, tested and applied. Analysis of the results show consistent physical behaviour.List of symbols  A  Deformation tensor - D_t, D_f  Reactor and injector diameter - L_x, L_y, L_z  Dimensions of the 3D-LIF measurement volume - N_x, N_y, N_z  Number of data samples per measurement volume - Re_m  Reynolds number based on mean velocity - Sc  Schmidt number - f  Focal length - f_c,lens, f_c,array  Cut-off frequency for camera lens and sensor array - f, f  Marginal probability density function for and - f  Joint probability density function of and -  Temporal separation of the 2D data planes -  Temporal resolution of the measurement volume -  Spatial resolution of the measurement volume - ,  Deformation angle and deformation, where =tan -  Fluid energy dissipation rate - ,  Strain limited vorticity and scalar diffusion layers -  Scalar concentration - , _B Kolmogorov and Batchelor length scale - ,  Spherical angles of the scalar gradient vector, -  Kinematic viscosity - _e^–2 Half-thickness (1/e²) of the laser sheet - , _a Kolmogorov and Kolmogorov advection time scales -  Scalar energy dissipation rate -  Scalar diffusivity - 2D, 3D Two- and three-dimensional - DNS Direct numerical simulation - LIF Laser-induced fluorescence - SED Scalar energy dissipation rate - TR Tubular reactor

---

A Strongly Degenerate Quasilinear Equation: the Parabolic Case

We prove the existence and uniqueness of entropy solutions of the Neumann problem for the quasilinear parabolic equation u_t=÷ a(u, Du), where a(z,)=f(z,), and f is a convex function of with linear growth as ||||, satisfying other additional assumptions. In particular, this class includes the case where f(z,)=(z)(), >0, and is a convex function with linear growth as ||||.     

Flow in porous media II: The governing equations for immiscible,two-phase flow

The Stokes flow of two immiscible fluids through a rigid porous medium is analyzed using the method of volume averaging. The volume-averaged momentum equations, in terms of averaged quantities and spatial deviations, are identical in form to that obtained for single phase flow; however, the solution of the closure problem gives rise to additional terms not found in the traditional treatment of two-phase flow. Qualitative arguments suggest that the nontraditional terms may be important when / is of order one, and order of magnitude analysis indicates that they may be significant in terms of the motion of a fluid at very low volume fractions. The theory contains features that could give rise to hysteresis effects, but in the present form it is restricted to static contact line phenomena.Roman Letters (, = , , and ) A interfacial area of the- interface contained within the macroscopic system, m² - A _e area of entrances and exits for the -phase contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - g gravity vector, m²/s - H mean curvature of the- interface, m^–1 - H area average of the mean curvature, m^–1 - H – H , deviation of the mean curvature, m^–1 - I unit tensor - K Darcy's law permeability tensor, m² - K permeability tensor for the-phase, m² - K viscous drag tensor for the-phase equation of motion - K viscous drag tensor for the-phase equation of motion - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the-phase, m - n unit normal vector pointing from the-phase toward the-phase (n = –n ) - p _c p – P , capillary pressure, N/m² - p pressure in the-phase, N/m² - p intrinsic phase average pressure for the-phase, N/m² - p – p , spatial deviation of the pressure in the-phase, N/m² - r ₀ radius of the averaging volume, m - t time, s - v velocity vector for the-phase, m/s - v phase average velocity vector for the-phase, m/s - v intrinsic phase average velocity vector for the-phase, m/s - v – v , spatial deviation of the velocity vector for the-phase, m/s - V averaging volume, m³ - V volume of the-phase contained within the averaging volume, m³ Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - viscosity of the-phase, Nt/m² - surface tension of the- interface, N/m - viscous stress tensor for the-phase, N/m² - / kinematic viscosity, m²/s     

Determination of permeability tensors for two-phase flow in homogeneous porous media: Theory

In this paper we continue previous studies of the closure problem for two-phase flow in homogeneous porous media, and we show how the closure problem can be transformed to a pair of Stokes-like boundary-value problems in terms of pressures that have units of length and velocities that have units of length squared. These are essentially geometrical boundary value problems that are used to calculate the four permeability tensors that appear in the volume averaged Stokes' equations. To determine the geometry associated with the closure problem, one needs to solve the physical problem; however, the closure problem can be solved using the same algorithm used to solve the physical problem, thus the entire procedure can be accomplished with a single numerical code.Nomenclature a a vector that maps V onto , m^-1. - A a tensor that maps V onto . - A area of the - interface contained within the macroscopic region, m². - A area of the -phase entrances and exits contained within the macroscopic region, m². - A area of the - interface contained within the averaging volume, m². - A area of the -phase entrances and exits contained within the averaging volume, m². - Bo Bond number (= (=(–)g²/). - Ca capillary number (= v/). - g gravitational acceleration, m/s². - H mean curvature, m^-1. - I unit tensor. - permeability tensor for the -phase, m². - viscous drag tensor that maps V onto V. - ^* dominant permeability tensor that maps onto v , m². - ^* coupling permeability tensor that maps onto v , m². - characteristic length scale for the -phase, m. - l characteristic length scale representing both and , m. - L characteristic length scale for volume averaged quantities, m. - n unit normal vector directed from the -phase toward the -phase. - n unit normal vector representing both n and n . - n unit normal vector representing both n and n . - P pressure in the -phase, N/m². - p superficial average pressure in the -phase, N/m². - p intrinsic average pressure in the -phase, N/m². - p –p , spatial deviation pressure for the -phase, N/m². - r ₀ radius of the averaging volume, m. - r position vector, m. - t time, s. - v fluid velocity in the -phase, m/s. - v superficial average velocity in the -phase, m/s. - v intrinsic average velocity in the -phase, m/s. - v –v , spatial deviation velocity in the -phase, m/s. - V volume of the -phase contained within the averaging volmue, m³. - averaging volume, m³. Greek Symbols V /, volume fraction of the -phase. - viscosity of the -phase, Ns/m². - density of the -phase, kg/m³. - surface tension, N/m. - (v +v ^T ), viscous stress tensor for the -phase, N/m².     

Existence theorem for a minimum problem with free discontinuity set

We study the variational problem Where is an open set in ⁿ ,n2gL ^q () L (), 1q<+, O<, <+ andH _n–1 is the (n–1)-dimensional Hausdorff Measure.     

Two-phase flow in heterogeneous porous media III: Laboratory experiments for flow parallel to a stratified system

Two-phase flow in stratified porous media is a problem of central importance in the study of oil recovery processes. In general, these flows are parallel to the stratifications, and it is this type of flow that we have investigated experimentally and theoretically in this study. The experiments were performed with a two-layer model of a stratified porous medium. The individual strata were composed of Aerolith-10, an artificial: sintered porous medium, and Berea sandstone, a natural porous medium reputed to be relatively homogeneous. Waterflooding experiments were performed in which the saturation field was measured by gamma-ray absorption. Data were obtained at 150 points distributed evenly over a flow domain of 0.1 × 0.6 m. The slabs of Aerolith-10 and Berea sandstone were of equal thickness, i.e. 5 centimeters thick. An intensive experimental study was carried out in order to accurately characterize the individual strata; however, this effort was hampered by both local heterogeneities and large-scale heterogeneities.The theoretical analysis of the waterflooding experiments was based on the method of large-scale averaging and the large-scale closure problem. The latter provides a precise method of discussing the crossflow phenomena, and it illustrates exactly how the crossflow influences the theoretical prediction of the large-scale permeability tensor. The theoretical analysis was restricted to the quasi-static theory of Quintard and Whitaker (1988), however, the dynamic effects described in Part I (Quintard and Whitaker 1990a) are discussed in terms of their influence on the crossflow.Roman Letters A interfacial area between the -region and the -region contained within V, m² - a vector that maps onto , m - b vector that maps onto , m - b vector that maps onto , m - B second order tensor that maps onto , m² - C second order tensor that maps onto , m² - E energy of the gamma emitter, keV - f fractional flow of the -phase - g gravitational vector, m/s² - h characteristic length of the large-scale averaging volume, m - H height of the stratified porous medium , m - i unit base vector in the x-direction - K local volume-averaged single-phase permeability, m² - K - {K}, large-scale spatial deviation permeability - { K} large-scale volume-averaged single-phase permeability, m² - K ^* large-scale single-phase permeability, m² - K ^** equivalent large-scale single-phase permeability, m² - K local volume-averaged -phase permeability in the -region, m² - K local volume-averaged -phase permeability in the -region, m² - K - {K } , large-scale spatial deviation for the -phase permeability, m² - K ^* large-scale permeability for the -phase, m² - l thickness of the porous medium, m - l characteristic length for the -region, m - l characteristic length for the -region, m - L length of the experimental porous medium, m - characteristic length for large-scale averaged quantities, m - n outward unit normal vector for the -region - n outward unit normal vector for the -region - n unit normal vector pointing from the -region toward the -region (n = - n ) - N number of photons - p pressure in the -phase, N/m² - p ₀ reference pressure in the -phase, N/m² - local volume-averaged intrinsic phase average pressure in the -phase, N/m² - large-scale volume-averaged pressure of the -phase, N/m² - large-scale intrinsic phase average pressure in the capillary region of the -phase, N/m² - - , large-scale spatial deviation for the -phase pressure, N/m² - p_c , capillary pressure, N/m² - p _c capillary pressure in the -region, N/m² - p capillary pressure in the -region, N/m² - {p _c } ^c large-scale capillary pressure, N/m² - q -phase velocity at the entrance of the porous medium, m/s - q -phase velocity at the entrance of the porous medium, m/s - S_wi irreducible water saturation - S /, local volume-averaged saturation for the -phase - S _i initial saturation for the -phase - S _r residual saturation for the -phase - S ^* { }^*/}^*, large-scale average saturation for the -phase - S saturation for the -phase in the -region - S saturation for the -phase in the -region - t time, s - v -phase velocity vector, m/s - v local volume-averaged phase average velocity for the -phase, m/s - {v } large-scale averaged velocity for the -phase, m/s - v local volume-averaged phase average velocity for the -phase in the -region, m/s - v local volume-averaged phase average velocity for the -phase in the -region, m/s - v -{v } , large-scale spatial deviation for the -phase velocity, m/s - v -{v } , large-scale spatial deviation for the -phase velocity in the -region, m/s - v -{v } , large-scale spatial deviation for the -phase velocity in the -region, m/s - V large-scale averaging volume, m³ - y position vector relative to the centroid of the large-scale averaging volume, m - {y}^c large-scale average of y over the capillary region, m Greek Letters local porosity - local porosity in the -region - local porosity in the -region - local volume fraction for the -phase - local volume fraction for the -phase in the -region - local volume fraction for the -phase in the -region - {}^* { }^*+{ }^*, large-scale spatial average volume fraction - { }^* large-scale spatial average volume fraction for the -phase - mass density of the -phase, kg/m³ - mass density of the -phase, kg/m³ - viscosity of the -phase, N s/m² - viscosity of the -phase, Ns/m² - V /V , volume fraction of the -region ( + =1) - V /V , volume fraction of the -region ( + =1) - attenuation coefficient to gamma-rays, m^-1 - -      

The value of the critical exponent for reaction-diffusion equations in cones

Let D R ^N be a cone with vertex at the origin i.e., D = (0, )x where S ^N–1 and x D if and only if x = (r, ) with r=¦x¦, . We consider the initial boundary value problem: u _t = u+u ^p in D×(0, T), u=0 on Dx(0, T) with u(x, 0)=u ₀(x) 0. Let ₁ denote the smallest Dirichlet eigenvalue for the Laplace-Beltrami operator on and let ₊ denote the positive root of (+N–2) = ₁. Let p ^* = 1 + 2/(N + ₊). If 1 < p < p ^*, no positive global solution exists. If p>p ^*, positive global solutions do exist. Extensions are given to the same problem for u _t=+¦x¦ u ^p .This research was supported in part by the Air Force Office of Scientific Research under Grant # AFOSR 88-0031 and in part by NSF Grant DMS-8 822 788. The United States Government is authorized to reproduce and distribute reprints for governmental purposes not withstanding any copyright notation therein.     

On laminar flow through a uniformly porous pipe

Numerous investigations ([1] and [4–9]) have been made of laminar flow in a uniformly porous circular pipe with constant suction or injection applied at the wall. The object of this paper is to give a complete analysis of the numerical and theoretical solutions of this problem. It is shown that two solutions exist for all values of injection as well as the dual solutions for suction which had been noted by previous investigators. Analytical solutions are derived for large suction and injection; for large suction a viscous layer occurs at the wall while for large injection one solution has a viscous layer at the centre of the channel and the other has no viscous layer anywhere. Approximate analytic solutions are also given for small values of suction and injection.

Nomenclature

General r distance measured radially - z distance measured along axis of pipe - u velocity component in direction of z increasing - v velocity component in direction of r increasing - p pressure - density - coefficient of kinematic viscosity - a radius of pipe - V velocity of suction at the wall - r ²/a ² - R wall or suction Reynolds number, Va/ - f() similarity function defined in (6) - u ₀() eigensolution - U(0) a velocity at z=0 - K an arbitrary constant - B _K Bernoulli numbers Particular Section 5 perturbation parameter, –2/R - ² a constant, –K - x / - g(x) f()/ Section 6 perturbation parameter, –R/2 - ² a constant, –K - g() f() - g _c ()=g() near centre of pipe - * point where g()=0 Section 7 2/R - ² K - t (1–)/ - w(t, ) [1–f(t)]/ - ₀, ₁ constants - g() f()– ₀ - ₀/ - ₀ a constant - * point where f()=0