首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 46 毫秒
1.
研究Euler杆大挠度屈曲问题,将控制方程的线性化与谐波平衡法组合起来,分别建立以杆端转角形式表示的屈曲荷载及最大挠度的解析逼近公式,这些公式既适用于小变形又适用于大变形。  相似文献   

2.
本文用传递矩阵法在初始缺陷法的概念下对圆柱壳的一端有四个类似集中力的局部轴压作用下的失稳问题进行了研究。  相似文献   

3.
两参数轴向冲击载荷作用下圆柱壳弹塑性动力屈曲   总被引:4,自引:0,他引:4  
研究圆柱壳在两参数轴向冲击载荷下的弹塑性动力屈曲问题,基本控制方程由弹塑性连续介质中关于加速度的最小原理获得,本构关系采用增量理论。研究表明:屈曲过程可划分为两相,两相之间由临界时间t表征,并分别讨论了应力波对屈曲的影响,压缩波与弯曲波的相互作用及几何尺寸,材料参数,初始缺陷,载荷峰值及持续时间等诸多因素与动力屈曲的关系。  相似文献   

4.
The Initial Imperfection Amplified Criterion is applied to investigate the geometric nonlinear dynamic buckling of statically preloaded ring-stiffened cylindrical shells under axial fluid-solid impact. Taking account of the effects of large deformation and initial geometric imperfection, the governing equations are obtained by the Galerkin method and solved by the Runge-Kutta method. The effects of static preloading (uniform external radial pressure) on the buckling features and the load-carrying ability of ring-stiffened cylindrical shells against axial impact are discussed. The project is supported by the National Natural Sciences Foundation of China (No. 19802017).  相似文献   

5.
主要研究受轴向冲击圆柱壳非对称屈曲耗能,从轴向屈曲变形、环向屈曲变形和轴向压缩变形3个角度进行理论推导. 结果表明: 环向屈曲变形能随屈曲折叠边数增加有减小趋势, 且占总耗能比例很小,可知圆柱壳受轴向冲击屈曲过程中外力做功主要转变为轴向变形能,环向屈曲变形消耗外力功很少.  相似文献   

6.
静力预加载环向加筋圆柱壳的轴向流-固冲击屈曲   总被引:1,自引:0,他引:1  
将初缺陷放大准则应用于静力预加载环向加筋圆柱壳结构受轴向流-固冲击加载作用时的几何非线性动力屈曲研究中。运用Galerkin方法推导出壳体-肋骨系统的动力屈曲控制方程,并且采用Runge-Kutta法进行数值求解。着重分析了静力预加载荷对结构屈曲性态及抗轴向冲击能力的影响。  相似文献   

7.
Bubble functions are finite element modes that are zero on the boundary of the element but nonzero at the other point. The present paper adds bubble functions to the ordinary Complex Finite Strip Method(CFSM) to calculate the elastic local buckling stress of plates and plate assemblies. The results indicate that the use of bubble functions greatly improves the convergence of the Finite Strip Method(FSM) in terms of strip subdivision, and leads to much smaller storage required for the structure stiffness and stability matrices. Numerical examples are given, including plates and plate structures subjected to a combination of longitudinal and transverse compression, bending and shear. This study illustrates the power of bubble functions in solving stability problems of plates and plate structures. The work was partly supported by the Natural Science Foundation of Jiangxi Province of China and by the Basic Theory Research Foundation of Nanchang University.  相似文献   

8.
An approximate method is presented in this paper for studying the dynamic buckling of double-walled carbon nanotubes (DWNTs) under step axial load. The analysis is based on the continuum mechanics model, which takes into account the van der Waals interaction between the outer and inner nanotubes. A buckling condition is derived, from which the critical buckling load and associated buckling mode can be determined. As examples, numerical results are worked out for DWNTs under fixed boundary conditions. It is shown that, due to the effect of van der Waals forces, the critical buckling load of a DWNT is enhanced when inserting an inner tube into a single-walled one. The paper indicates that the critical buckling load of DWNTs for dynamic buckling is higher than that for static buckling. The effect of the radii is also examined. In addition, some of the results are compared with the previous ones.  相似文献   

9.
王德禹 《力学季刊》1996,17(2):142-146
本文研究刚粘塑性圆环受法向冲击时的动力屈曲,文中考虑了冲击过程中圆环厚度的变化,环向力的变化以及基本变形速度的变化。通过用数值方法求解扰动运动微分方程,结果表明,当规定了临界放大函数后,仅当冲击速度位于某一范围之内时,才会发生动力屈曲。  相似文献   

10.
轴压作用下充液圆柱壳屈曲的实验研究   总被引:2,自引:0,他引:2  
本文从实验及理论两个方面对充满液体的圆柱壳在轴向压力作用下液体内压的变化进行了实际测试及理论定性分析.采用薄壳理论分析了屈曲前液体内压随轴向压力的变化规律,讨论了壳材料、几何参数及边界约束对内压的影响.通过实验实际测定了内压随轴向压力的变化规律.通过实验手段测定了充满液体的圆柱壳临界载荷、屈曲模态,讨论了充满液体的圆柱壳的承载能力等问题.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号