Structural,electronic, elastic,thermodynamic and vibration properties of TbN compound from first principles calculations

We have predicted structural, electronic, elastic, thermodynamic and vibration characteristics of TbN, using density functional theory within generalized-gradient (GGA) apraximation. For the total energy calculation we have used the projected augmented plane-wave (PAW) implementation of the Vienna Ab initio Simulation Package (VASP). We have used to examine structure parameter in eight different structures such as in NaCl (B1), CsCl (B2), ZB (B3), Tetragonal (L1₀), WC (Bh), NiAs (B8), PbO (B10) and Wurtzite (B4). We have performed the thermodynamics properties for TbN by using quasi-harmonic Debye model. We have, also, predicted the temperature and pressure variation of the volume, bulk modulus, thermal expansion coefficient, heat capacities and Debye temperatures in a wide pressure (0–130 GPa) and temperature ranges (0–2000 K). Furthermore, the band structure, phonon dispersion curves and corresponding density of states are computed. Our results are compared to other theoretical and experimental works, and excellent agreement is obtained.     

First principles calculations of electronic and optical properties of Ag2S

A theoretical study of structural, electronic and optical properties of Ag₂S is presented using the full potential linearized augmented plane wave (FP-LAPW) method within density functional theory (DFT). In this approach, the modified Becke Johnson (MBJ) potential coupled with Local Density Approximation (LDA) was used for the exchange-correlation potential calculation. Ground state properties are determined for the bulk material in monoclinic phase. Band structure reveals that this compound is a direct energy band gap semiconductor. MBJLDA results for the band gap of this compound are much better than those obtained using LDA, Perdew–Burke–Ernzerhof generalized gradient approximation (PBE-GGA) and Engel–Vosko's GGA (EV-GGA). A very good agreement is observed between MBJLDA band gap and corresponding experimental values as compared to other calculations. Optical constants including the dielectric function, refractive index, extinction coefficient, electron energy loss function, reflectivity and absorption coefficient are obtained and discussed.     

Oxygen vacancies on TiO2 (110) from first principles calculations

We have carried out a systematic study of oxygen vacancy formation on the TiO2 (110) surface by means of plane-wave pseudopotential density-functional theory calculations. We have used models with the mean number of vacancies per surface unit cell being theta=0.25 and theta=0.5. The study comprises several kind of vacancies within the outermost layers of the surface. The use of a suitable set of technical parameter is often essential in order to get accurate results. We find that the presence of bridging vacancies is energetically favored in accordance to experimental data, although the formation of sub-bridging vacancies might be possible at moderate temperatures. Surprisingly, the spin state of the vacancy has little influence on the results. Atomic displacements are also analyzed and found to be strongly dependent on the particular arrangement of vacancies.     

Crystal chemistry of AB2X4 (X = S,Se, Te) compounds

An attempt is made to correlate the crystal structures of ternary chalcogenides of composition AB₂X₄ with the cationic radius ratio and a pseudo force-constant involving their electronegativities. The resultant diagram adequately resolves structures based on the types K₂SO₄, monoclinic, olivine, MnY₂S₄, Th₃P₄, and CaFe₂O₄ but structure types based on spinel, Cr₃Se₄, and Ag₂HgI₄ are not resolved. Crystal chemical arguments are used to explain these observations and to advance reasons for the successes and failures of this method for predicting structure types.     

Elimination of HX (X = Cl,Br) from haloalkenes on the Ru2Q2 (Q = S,Se) core complex

Treatment of [[Ru(P(OCH3)3)2(CH3CN)3]2(mu-Q2)](CF3SO3)4 (1, Q = S; 2, Q = Se) with haloalkenes resulted in the formation of complexes carrying unsaturated C3Q2 five-membered or C4Q2 six-membered rings via elimination of HX (X = Cl, Br). The reactions of 1 and 2 with allyl bromide gave the corresponding addition products, [[Ru(P(OCH3)3)2(CH3CN)3]2(mu-QCH=CHCH2Q)](CF3SO3)4 (3, Q = S; 4, Q = Se), via elimination of HBr. The elimination process seems to be thermodynamically controlled and takes place at the final stage of the reaction. The steric effect of the halogen atoms seems more operative than the electronic one.     

Synthetic applications of (Me3SiNSN)2E (E = S, Se) in chalcogen-nitrogen chemistry: formation and structural characterization of Cl2TeESN2 (E = S, Se) and [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, Br)

The reaction of (Me3SiNSN)2S with TeCl4 in CH2Cl2 affords Cl2TeS2N2 (1) and that of (Me3SiNSN)2Se with TeCl4 produces Cl2TeSeSN2 (2) in good yields. The products were characterized by X-ray crystallography, as well as by NMR and vibrational spectroscopy and EI mass spectrometry. The Raman spectra were assigned by utilizing DFT molecular orbital calculations. The pathway of the formation of five-membered Cl2TeESN2 rings by the reactions of (Me3SiNSN)2E with TeCl4 (E = S, Se) is discussed. The reaction of (Me3SiNSN)2Se with [PPh4]2[Pd2X6] yields [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, 4a; Br, 4b), the first examples of complexes of the (Se2N2S)2- ligand. In both cases, this ligand bridges the two palladium centers through the selenium atoms.     

Chemisorption of barrelene on Si(100) from first principles calculations

The chemisorption of C8H8 bicyclo[2.2.2]-2,5,7-octatriene (barrelene) on the Si(100) surface is studied from first principles calculations. We find that, in the most stable configuration, barrelene is bonded to Si(100) through four Si-C bonds, with the C-C bonds which are orthogonal to the underlying Si dimers. The chemisorption reaction responsible for this structure is driven by the biradical nature of the Si-Si dimer bond. Two others, slightly less stable configurations, exist which are also characterized by four Si-C bonds but have a different orientation or location with respect to the Si(100) surface. The properties of these and other, less stable configurations have been investigated. For the most stable structures, the effect of different surface coverages has been also studied, showing a tendency to easily form complete monolayers of barrelene on the Si surface. On the basis of energetic and kinetic considerations, we expect that chemisorption of barrelene monolayers on the Si(100) surface will be characterized however by a certain amount of disorder. Finally, several possible reaction pathways, leading from one stable structure to another of lower energy or from a molecule in the gas phase to a chemisorbed configuration, have been investigated in detail and estimates of the relative energy barriers are given.     

Elastic, electronic and thermal properties of YSZ from first principles

First principles calculations were performed to investigate the elastic, electronic and thermal properties of 14% cubic yttria-stabilized zirconia (YSZ) using the pseudo potential plane-wave method within the gradient generalized approximation (GGA) for the exchange and correlation potential. Computed lattice constant parameters are in good agreement with the available experimental results. The three independent elastic constants were computed by means of the stress-strain method, indicating that 14% cubic YSZ is a mechanically stable structure. From the knowledge of the elastic constants, a set of related properties, namely bulk, shear modulus, Young’s modulus, sound velocity, Debye temperature, thermal capacity and minimum thermal conductivity are numerically estimated in the frame work of the Voigt-Reuss-Hill approximation for YSZ polycrystalline. The calculated bulk modulus, shear modulus, Young’s modulus, sound velocity, Debye temperature, thermal capacity and minimum thermal conductivity are in reasonable agreement with the available experimental and theory data. Density of states, charge density and Mulliken population analysis show that the 14% cubic YSZ is covalent and possess ionic character.     

Structural,elastic, electronic and magnetic properties of perovskite-like Co3WC,Rh3WC and Ir3WC from first principles calculations

We have performed ab initio total energy calculations using the full-potential linearized augmented plane wave method (FP-LAPW) with the generalized gradient approximation (GGA) for the exchange-correlation potential to predict the structural, elastic, cohesive, electronic and magnetic properties of perovskite-like phases Co₃WC, Rh₃WC and Ir₃WC. The optimized lattice parameters, density, independent elastic constants (C_ij), bulk moduli, shear moduli, tetragonal shear moduli, compressibility, and Cauchy pressure, as well as electronic densities of states, cohesive and formation energies, atomic magnetic moments have been obtained and analyzed for the first time.     

X- (X = O, S, Se) Ions in alkali halide lattices through density functional calculations. 2. Interstitial defect models

Density functional theory techniques are used to investigate the defect structure of X- (X = O, S, Se) ions in MZ (M = Na, K, Rb and Z = Cl, Br) alkali halides which exhibit monoclinic-I g-tensor symmetry, using cluster in vacuo, embedded cluster, and periodic embedding schemes. Although a perturbed interstitial defect model was suggested from electron paramagnetic resonance experiments (EPR), the nature of the perturbation is still unknown. An appropriate defect model is developed theoretically by comparing structural and energetical properties of various defect configurations. Further validation is achieved by cross referencing experimental and computed EPR data. On the basis of the computational results, the following defect model is proposed: the X- ion is located interstitially with a charge compensating halide vacancy in its first coordination shell.     

E2(CN)2 (E = S, Se) and related compounds

A synthetic, spectroscopic, and theoretical study of Ex(CN)2 (E = S, Se; x = 1-3) is described. The X-ray structures of Se2(CN)2 and Se3(CN)2 have been determined. Se2(CN)2 crystallizes in a chiral space group with the CN groups approximately gauche.     

Electrochemically selective double C(sp2)–X (X = S/Se,N) bond formation of isocyanides

The construction of C(sp²)–X (X = B, N, O, Si, P, S, Se, etc.) bonds has drawn growing attention since heteroatomic compounds play a prominent role from biological to pharmaceutical sciences. The current study demonstrates the C(sp²)–S/Se and C(sp²)–N bond formation of one carbon of isocyanides with thiophenols or disulfides or diselenides and azazoles simultaneously. The reported findings could provide access to novel multiple isothioureas, especially hitherto rarely reported selenoureas. The protocol showed good atom-economy and step-economy with only hydrogen evolution and theoretical calculations accounted for the stereoselectivity of the products. Importantly, the electrochemical reaction could exclusively occur at the isocyano part regardless of the presence of susceptible radical acceptors, such as a broad range of arenes and alkynyl moieties, even alkenyl moieties.

We have developed an efficient and sustainable electrochemical strategy for the double C(sp²)–X (S/Se, N) bond formation of isocyanides simultaneously. A series of novel isothio/selenoureas were obtained via a three-component cross-coupling.

The construction of C(sp²)–X (X = B, N, O, Si, P, S, Se, etc.) bonds has drawn increased attention from researchers since heteroatomic compounds play a prominent role in various fields.¹ Traditionally, the transition-metal-catalyzed cross-coupling of a nucleophile and an electrophile is an important method for the formation of C(sp²)–X bonds.² Obviously, the direct cross-coupling of C(sp²)–H/X–H is a time-, effort-, and resource-economical process to construct C(sp²)–X bonds as it avoids the pre-functionalization of substrates.³ Alternatively, radical chemistry provides greener and more mild strategies for the formation of C(sp²)–X bonds, and a variety of high added-value compounds can be afforded successfully.⁴ Despite the numerous advances, these reported reactions are limited as they involve only single C(sp²)–X bond formation. Access to double C(sp²)–X bonds formation of one carbon remains still a room for improvement stimultaneously.As an ideal connector, isocyanides could be inserted into metal–carbon and metal–heteroatom bonds to construct double C(sp²)–X bonds.⁵ On the other hand, isocyanides could transform into heteroatomic molecules with electrophiles, nucleophiles and radicals.⁶ Although many elegant studies have been reported, the above methods are largely limited by the pre-functionalization of the substrate, the toxicity of metals or tedious synthesis steps. From the point of synthetic efficiency and economy, exploiting a novel, efficient, and diverse radical strategy to access double C(sp²)–X bonds under mild conditions and with broad functional group tolerance is of paramount importance and in urgent demand.Radical transformation processes are ubiquitous throughout synthesis chemistry and provide new ideas for forging new bonds and novel molecules, especially valuable product motifs.⁷ As a complementary strategy to conventional radical-based reactions, electrochemistry, effectively transferring electrons from the electrode surface to the substance, has been developed into a powerful synthetic technique toward radical chemistry.⁸ This electrochemical strategy further stimulated a resurgence of interest in radical chemistry with good atom-economy and step-economy.⁹ Myriad electrochemical-induced radical reactions have been reported via single-electron oxidation/reduction with a plethora of radicals and radical acceptors. As reported, alkenes, alkynes, and cyano and aromatic compounds could be considered to be favorable radical acceptors in diverse transformations, such as cross-coupling, cyclization and difunctionalization reactions.¹⁰ However, the application of isocyanides as radical acceptors is limited in utility due to electrochemical tandem cyclization.¹¹ Therefore, on the basis of our research on electrochemical oxidative functionalization of isocyanides,¹² we continued to explore the properties of isocyanides as radical acceptors under electrochemical conditions.Initially, we commenced our investigations by using abundant and inexpensive phenyl disulfide (1), ethyl 2-isocyanoacetate (2) and 1H-benzo[d][1,2,3]triazole (3) as model substrates in a single operation via a three-component cross-coupling. After systematic optimization, the isothiourea 21 could been obtained in 90% isolated yield. To gain insights into the reaction process, we continued to carry out a series of control experiments as shown in Scheme 1. The control experiment demonstrated that electricity is indispensable. Under standard conditions, addition of 2.0 equivalents of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) showed no traces of product. Similarly, the reaction was suppressed in the presence of butylated hydroxytoluene (BHT). The P(OEt)₃-trapping product could be detected by gas chromatography mass spectrometry (GCMS). Simultaneously, a S-centred radical signal (g = 2.0070, AN = 13.40 G, AH = 14.88 G) was quickly trapped by 5,5-dimethyl-1-pyrroline N-oxide (DMPO) via electron paramagnetic resonance (EPR) experiments. The reported results revealed that this reaction might proceed via S-radical pathways.Open in a separate windowScheme 1Control experiments.For deeper research of the priority of interaction for isocyanides vs. other radical acceptors with radicals, we sought to conduct robustness screening of a wide range of radical acceptors as shown in Scheme 2.¹³ The addition of an aryl olefin led to the complete shutdown of product formation (21) and the products of difunctionalization of alkenes were also not detected. To our delight, the alkenyl moiety did not affect the reaction efficiency under the electrochemical conditions. Unlike the aryl olefin, the addition of phenylacetylene did not inhibit product formation (21), delivering a yield of 93%. Similarly, ethyl 2-isocyanoacetate could be transformed into product (21) smoothly with 1-heptyne. The addition of mesitylene preserved the yield, while the yield decreased slightly with anisole. With the addition of furan and thiophene, an excellent yield of product (21) could still be obtained. Beside electron-donating arenes, we continued to add electron-withdrawing arenes to the reaction system. As expected, a satisfactory yield was obtained with 4-cyanopyridine. The results revealed that the electrochemical reaction exclusively occurred at the isocyano part regardless of the presence of electron-withdrawing arenes, electron-donating arenes and the alkynyl moiety, even the alkenyl moiety, which are also susceptible to radical conditions.Open in a separate windowScheme 2Competitive experiments of isocyanides vs. other radical acceptors with radicals. Conditions: 1 (0.15 mmol), 2 (0.6 mmol), 3 (0.5 mmol), R. A. = radical acceptors (0.6 mmol), ⁿBu₄NBF₄ (0.5 mmol), MeCN (6 mL), cloth anode, Pt cathode, undivided cell, constant current = 10 mA, room temperature, N₂, 2.25 h. ¹HNMR yield, dibromomethane as an internal standard.In order to further investigate the compatibility, we firstly examined the substrate scope of alkyl disulfides for the synthesis of isothioureas with ethyl 2-isocyanoacetate (2) and 1H-benzo[d][1,2,3]triazole (3) as shown in Scheme 3. To our delight, the yields did not decrease significantly with the increase of the carbon chain from methyl to decyl in this transformation (4–7). Isopropyl, isobutyl, cyclopentyl and cyclohexyl were well tolerated with good to excellent yields (8–11). Substances, containing sensitive benzylic C–H bonds, were tolerated to access novel isothioureas in this electrochemical induced-radical process (12–14, 34). Afterwards, we continued to explore the applicability from alkyl disulfides to thiophenol and a series of molecule isothioureas were obtained successfully with satisfactory yield. Thiophenol, containing electron-neutral (F, Cl, Br, H), electron-withdrawing (OCF₃, CF₃, and CO₂Me) and electron-donating (Me, Et, ^tBu, OMe, and SMe) groups, could smoothly transform to realize this process with high stereoselectivity under mild conditions (15–26). The structure of Z-conformer (16) was confirmed by X-ray crystallographic analysis. In addition, this protocol was successfully applied to thiophenols bearing diverse groups at different positions with good yields, indicating that steric hindrance has no obvious effect (20, 27–31). With curiosity, we tried to evaluate the tolerance of diselenides to construct novel Se–C–N bonds simultaneously. Unexpectedly, regardless of alkyl diselenides (32–33), benzyl diselenide (34) or aryl diselenide (35), all were well tolerated under electrochemical conditions, providing a series of unprecedented isoselenoureas, which were inaccessible by conventional methods. The compatibility of sensitive functional groups provides an opportunity for further molecular modification. The sensitive functional architectures including but not limited to ester (36), benzyloxy (37), allyl and allyloxy as well as endene (38, 41–44), labile alkyl chloride (39) and alkyl bromide (40), propargyl (44), and thiophene (45), all remained intact, enriching the diversity of heteroatom compounds. The merit of this methodology was further demonstrated by elaboration of a wide gamut of functional molecules and drug molecules to diverse isothioureas. Natural products including l-menthol and geraniol (46–47), food additives including isopulegol and furfuryl alcohol (48–49), and pharmaceuticals including ibuprofen (50) were apt to give rise to the corresponding isothioureas in 50–78% yields.Open in a separate windowScheme 3Scope of thiophenols/disulfides/diselenides. Conditions: ^a disulfides/diselenides (0.15 mmol) or ^b thiophenols (0.3 mmol), isocyanides (0.6 mmol), 1H-benzotriazole (0.5 mmol), ⁿBu₄NBF₄ (0.5 mmol), MeCN (6 mL), cloth anode, Pt cathode, undivided cell, constant current = 10 mA, room temperature, N₂, 2.25 h. Isolated yield.After defining the scope of thiophenols and disulfides, we turned our attention to explore the substrate scope with respect to nucleophiles in Scheme 4. Benzotriazole, with mono-substitution or multi-substitution, could be efficiently converted to the corresponding skeletons in 55–75% yields (51–54). Under standard conditions, pyrazole also showed great reactivity with phenyl disulfide or ethyl disulfide (55–56). The introduction of a halogen group in pyrazolylcycle, especially a subtle C–I bond, was compatible with satisfactory results (57–59, 64–65). 4-Methyl-1H-pyrazole as a coupling partner also realized the aminosulfenylation of isocyanide, albeit less efficiently (62). Of note is that the yield was increased to 70% from 40% by replacing methyl with phenyl (63). In addition to benzotriazole and pyrazole derivatives, other triazoles and tetrazole were proved to be viable coupling partners as well, enabling access to the target products in synthetically useful yields (66–70). Subsequently, with this established-optimized condition, we set out to investigate substrates for isocyanide coupling partners. With methyl isocyanoacetate (71), a similar effect was observed in an electrochemical difunctionalization reaction. As expected, both tosylmethyl isocyanide and benzyl isocyanide were demonstrated to be competent substrates (72–73). Cyclohexyl isocyanide, as a representative of secondary isocyanides, converted into the corresponding product (74). Gratifyingly, isocyanides, regardless of the steric effect, could engage with thiophenols to give the corresponding adducts in good yields (75–76). Aryl isocyanides however afforded the desired products in low yields under standard reaction conditions (77–78).Open in a separate windowScheme 4Scope of azazoles. Conditions: ^a disulfides/diselenides (0.15 mmol) or ^b thiophenols (0.3 mmol), isocyanides (0.6 mmol), azazoles (0.5 mmol), ⁿBu₄NBF₄ (0.5 mmol), MeCN (6 mL), cloth anode, Pt cathode, undivided cell, constant current = 10 mA, room temperature, N₂, 2.25 h. Isolated yield.To evaluate the feasibility of this electrochemical protocol, we monitored the reaction on a 4.5 mmol scale as shown in Scheme 5. Under similar conditions, by prolonging the reaction time to 34 h, a good isolated yield of 72% was obtained, which provided an opportunity for further synthetic manipulations.Open in a separate windowScheme 5Gram-scale synthesis.In order to account for the stereoselectivity of products, theoretical calculations were performed. The result demonstrated that the free energy of the Z-conformer of the product 16 is 2.3 kcal mol⁻¹ smaller than that of the E-conformer.Based on a previously reported mechanistic study¹⁴ and these above observations, a synthetically possible mechanism for the electrochemical intermolecular difunctionalization reaction is depicted in Scheme 6. A sulfur radical was formed via single-electron-transfer (SET) reduction of the disulfide or SET oxidation of the thiophenol. Subsequently, the exclusive capture of the S-radical by the isocyano part yields the imine C-radical I. Further SET oxidation of this radical intermediate to the corresponding imine carbocation II, followed by nucleophilic trapping intermolecularly, affords the final isothioureas.Open in a separate windowScheme 6Proposed reaction mechanism.     

Structural and dynamical stability of cadmium nitride using first principles calculations

We report the results of a theoretical study on the behavior of the structural parameters, electronic band structure, vibrational and thermodynamical properties of transition metal nitride, CdN in the rocksalt (RS), NiAs (P63/mmc) and CuS (B₁₈) phases at ambient pressure. The calculations are based on the ab-initio plane-wave pseudopotential density functional theory (DFT), within the generalized gradient approximations (GGA) for the exchange and correlation functional. The calculated values of lattice parameters, bulk modulus and its first order pressure derivative are in good agreement with other reports. A linear response approach to the density functional theory is used to derive the phonon frequencies, phonon densities of states and thermodynamical properties. We discuss the contribution of the phonons in the dynamical stability of CdN and detailed analysis of thermodynamical properties of specific heat and Debye temperature for CdN in all considered structures.     

Structural and electronic properties of Al12X+ (X=C, Si, Ge, Sn, and Pb) clusters

Using the first-principles method with the generalized gradient approximation, the authors have studied the structural and electronic properties of Al(12)X(+) (X=C, Si, Ge, Sn, and Pb) clusters in detail. The ground state of Al(12)C(+) is a low symmetry C(s) structure instead of an icosahedron. However, the Si, Ge, Sn, and Pb atom doped cationic clusters favor icosahedral structures. The ground states for Al(12)Si(+) and Al(12)Ge(+) are icosahedra, while the C(5nu) structures optimized from an icosahedron with a vertex capped by a tetravalent atom have the highest binding energy for Al(12)Sn(+) and Al(12)Pb(+) clusters. The I(h) structure and the C(5nu) structure are almost degenerate for Al(12)Ge(+), whose binding energy difference is only 0.03 eV. The electronic properties are altered much by removing an electron from the neutral cluster. The binding strength of a valence electron is enhanced, while the binding energy of the cluster is reduced much. Due to the open electronic shell, the band gaps between the highest occupied molecular orbital and the lowest unoccupied molecular orbital are approximately 0.3 eV for the studied cationic clusters.     

Structural and electronic properties of amorphous bismuth calcium borate from first-principle calculations

Structural Chemistry - We investigatethe electronic and structural properties of two new amorphous materials, Bi6Ca2O28B12 and Bi6Ca2 O28B11:Tm, using density functional theory with a short-range...     

First principles prediction of the elastic,electronic, and optical properties of Sb2S3 and Sb2Se3 compounds

We have performed a first principles study of structural, mechanical, electronic, and optical properties of orthorhombic Sb₂S₃ and Sb₂Se₃ compounds using the density functional theory within the local density approximation. The lattice parameters, bulk modulus, and its pressure derivatives of these compounds have been obtained. The second-order elastic constants have been calculated, and the other related quantities such as the Young's modulus, shear modulus, Poisson's ratio, anisotropy factor, sound velocities, Debye temperature, and hardness have also been estimated in the present work. The linear photon-energy dependent dielectric functions and some optical properties such as the energy-loss function, the effective number of valence electrons and the effective optical dielectric constant are calculated. Our structural estimation and some other results are in agreement with the available experimental and theoretical data.     

水系锌离子电池嵌入负极材料TiX2 (X = S,Se)的储锌机制

水系锌离子电池(ZIBs)以其低成本、高安全性和环境友好的优点受到了研究者的广泛关注,成为大规模电化学储能系统的理想选择之一。然而锌金属负极在应用时面临着锌枝晶生长、腐蚀反应和副反应等难以克服的障碍,严重制约了水系锌离子电池的发展。探索可替代锌金属的储锌负极是应对上述问题的有效策略,因此研究者围绕过渡金属氧化物、硫化物和导电聚合物开展了深入研究。以TiX₂ (X = S, Se)为代表的二维过渡金属硫族化合物(TMDs)具有较大的层间距和快速的离子传输通道,可作为锌离子电池的负极,但其储锌反应机制尚未得到完整的揭示。在本文中,我们使用密度泛函理论(DFT)计算方法系统地研究锌离子在TiX₂中的嵌入反应。首先我们采用群论去描述嵌锌TiX₂的稳定层间构型的特点,定义了一个依赖于超胞并且只涉及平移旋转两种对称操作的群,其子群可以用来描述层间构型的对称性,而且用来描述最稳定构型的子群总是倾向于有最大的阶数。基于该计算得到的一系列对应于不同放电深度的TiX₂的稳定结构,我们发现TiS₂和TiSe₂两种材料在锌嵌入/脱出过程中的开路电压(OCV)均低于0.5 V。态密度(DOS)的计算结果表明TiX₂具有很好的电子导电性,而分波态密度(PDOS)的结果显示随着锌的嵌入闭壳层的Ti⁴⁺还原成开壳层的Ti³⁺,并且伴随着Zn―X键的生成。Bader电荷分析的结果表明随着X的嵌入,X相比Ti得到了更多的负电荷,意味着X也参与了TiX₂的氧化还原过程。爬坡弹性带方法(CINEB)计算的结果证实了Zn²⁺在TiX₂中具有较低的扩散能垒(对于TiS₂是0.333 eV,对于TiSe₂是0.338 eV)。本文的研究结果不仅从本质上证明了TiX₂适合作为锌离子电池的嵌锌负极材料,而且为其他高性能TMDs电池材料的DFT研究提供了新的见解。