Validated spectrophotometric method for quantitative determination of simvastatin in pharmaceutical formulations and human serum

A simple ultraviolet spectrophotometric method for the determination of simvastatin in methanol has been devised and compared with the existing pharmacopoeial RP-HPLC method for the estimation of the drug. Analytical parameters such as stability, selectivity, accuracy, and precision have been established for the method, using SIMS® tablets and human serum samples, and evaluated statistically to assess the application of the method. The method was validated under ICH and USP guidelines and was found to comprise the advantages for simplicity, stability, sensitivity, reproducibility, and accuracy for use as an alternative to existing nonspectrophotometric methods for the routine determination of the drug in pharmaceutical formulations and for pharmaceutical investigations involving simvastatin.     

Validated kinetic spectrophotometric method for the determination of metoprolol tartrate in pharmaceutical formulations

A kinetic spectrophotometric method has been described for the determination of metoprolol tartrate in pharmaceutical formulations. The method is based on reaction of the drug with alkaline potassium permanganate at 25+/-1 degrees C. The reaction is followed spectrophotometrically by measuring the change in absorbance at 610 nm as a function of time. The initial rate and fixed time (at 15.0 min) methods are utilized for constructing the calibration graphs to determine the concentration of the drug. Both the calibration graphs are linear in the concentration range of 1.46 x 10(-6)-8.76 x 10(-6) M (10.0-60.0 microg per 10 ml). The calibration data resulted in the linear regression equations of log (rate)=3.634+0.999 log C and A=6.300 x 10(-4)+6.491 x 10(-2) C for initial-rate and fixed time methods, respectively. The limits of quantitation for initial rate and fixed time methods are 0.04 and 0.10 microg ml(-1), respectively. The activation parameters such as E(a), DeltaH(double dagger), DeltaS(double dagger) and DeltaG(double dagger) are also evaluated for the reaction and found to be 90.73 kJ mol(-1), 88.20 kJ mol(-1), 84.54 J K(-1) mol(-1) and 63.01 kJ mol(-1), respectively. The results are validated statistically and through recovery studies. The method has been successfully applied to the determination of metoprolol tartrate in pharmaceutical formulations. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Simultaneous spectrophotometric determination of mefenamic acid and paracetamol in pharmaceutical preparations

A spectrophotometric procedure for the simultaneous determination of mefenamic acid and paracetamol in a mixture is described. Using 0.01 M methanolic hydrochloric acid as solvent, the absorbance of the mixture is measured at 248, 279 and 351 nm. The concentration of each component can be calculated by solving two equations using two wavelengths, either 248 and 279 nm or 248 and 351 nm.     

Simultaneous determination of iron and aluminium by differential kinetic spectrophotometric method and chemometrics

A differential kinetic spectrophotometric method was researched and developed for the simultaneous determination of iron and aluminium in food samples. It was based on the direct reaction kinetics and spectrophotometry of these two metal ions with Chrome Azurol S (CAS) in ethylenediamine-hydrochloric acid buffer (pH 6.3). The results were interpreted with the use of chemometrics. The kinetic runs and the visible spectra of the complex formation reaction were studied between 540 and 750 nm every 30 s over a total period of 285 s. A set of synthetic metal mixture samples was used to build calibrations models. These were based on the spectral and kinetic two-way data matrices, which were processed separately by the radial basis function-artificial neural network (global RBF-ANN) method. The prediction performance of these models was poorer than that from the combined kinetic-spectral three-way array, which was similarly processed by the same method (% relative prediction error (RPE_T) = 5.6). These results demonstrate that improved predictions can be obtained from the data array, which has more information, and that appropriate chemometrics methods can enhance analytical performance of simple techniques such as spectrophotometry.Other chemometrics models were then applied: N-way partial least squares (NPLS), parallel factor analysis (PARAFAC), back propagation-artificial neural network (BP-ANN), single radial basis function-artificial neural network (RBF-ANN), and principal component neural network (PC-RBF-ANN). There was no substantial difference between the methods with the overall %RPE_T range being 5.0-5.8. These two values corresponded to the NPLS and BP-ANN models, respectively. The proposed method was applied for the determination of iron and aluminium in some commercial food samples with satisfactory results.     

PLS-UV spectrophotometric method for the simultaneous determination of paracetamol, acetylsalicylic acid and caffeine in pharmaceutical formulations

 A simple and fast analytical procedure is proposed for the simultaneous determination of paracetamol, acetylsalicylic acid and caffeine in pharmaceuticals by means the partial least square treatment of the spectrophotometric absorbance data between 216 and 300 nm, taken at 5 nm intervals. The method involves the use of 8 standard mixtures of the three compounds assayed, considered at two concentration levels, and the measurement of the absorbance of samples in a 20% (v/v) ethanol in water solution previously filtered. In the analysis of real and synthetic samples precise and accurate values were obtained by the aforementioned procedure, providing in all cases variation coefficients and accuracy errors lower than 5% which agree with the tolerance level established by the pharmacopoeia for this kind of samples which is ±10%. Received: 10 May 1996 / Revised: 8 July 1996 / Accepted: 12 July 1996     

Simultaneous voltammetric determination of paracetamol and caffeine in pharmaceutical formulations using a boron-doped diamond electrode

A simple and highly selective electrochemical method was developed for the single or simultaneous determination of paracetamol (N-acetyl-p-aminophenol, acetaminophen) and caffeine (3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione) in aqueous media (acetate buffer, pH 4.5) on a boron-doped diamond (BDD) electrode using square wave voltammetry (SWV) or differential pulse voltammetry (DPV). Using DPV with the cathodically pre-treated BDD electrode, a separation of about 550 mV between the peak oxidation potentials of paracetamol and caffeine present in binary mixtures was obtained. The calibration curves for the simultaneous determination of paracetamol and caffeine showed an excellent linear response, ranging from 5.0 × 10⁻⁷ mol L⁻¹ to 8.3 × 10⁻⁵ mol L⁻¹ for both compounds. The detection limits for the simultaneous determination of paracetamol and caffeine were 4.9 × 10⁻⁷ mol L⁻¹ and 3.5 × 10⁻⁸ mol L⁻¹, respectively. The proposed method was successfully applied in the simultaneous determination of paracetamol and caffeine in several pharmaceutical formulations (tablets), with results similar to those obtained using a high-performance liquid chromatography method (at 95% confidence level).     

Flow-injection spectrophotometric determination of methyldopa in pharmaceutical formulations

A flow-injection spectrophotometric procedure is proposed for methyldopa determination in pharmaceutical preparations. The determination is based on formation of a yellow product (measured at 410 nm) after complexation of methyldopa with molybdate. Under optimal conditions, Beer's law is obeyed in a concentration range of 50-200 mg l⁻¹ methyldopa. Typical correlation between absorbance and analyte concentration was 0.9999. Usual excipients used as additives in pharmaceuticals do not interfere with the proposed method. The analytical frequency was 210 h⁻¹ and the relative standard deviation (R.S.D.) was ≤2% for sample solution containing 150 mg l⁻¹ methyldopa (n = 11). The analytical results obtained in commercial formulations by applying the proposed FIA method were in good agreement with labeled values and those obtained by the Brazilian Pharmacopoeia procedure at 95% confidence level.     

Simultaneous kinetic spectrophotometric determination of norfloxacin and rifampicin in pharmaceutical formulation and human urine samples by use of chemometrics approaches

A kinetic spectrophotometric method with aid of chemometrics is proposed for the simultaneous determination of norfloxacin and rifampicin in mixtures. The proposed method was applied for the simultaneous determination of these two compounds in pharmaceutical formulation and human urine samples,and the results obtained are similar to those obtained by high performance liquid chromatography.     

Simultaneous determination of paracetamol and caffeine in pharmaceutical formulations and synthetic urine using cork-modified graphite electrodes

Journal of Solid State Electrochemistry - Cork-modified graphite electrodes were used to develop a simple and selective sensor for the simultaneous determination of paracetamol (PAR) and caffeine...     

Simultaneous spectrofluorimetric determination of iron and manganese by a differential kinetic catalytic method

A kinetic method is presented for the simultaneous determination of iron(III) and manganese(II) based on the different reaction rates resulting from the catalytic effect of both metal ions on the oxidation of 2-hydroxybenzaldehyde thiosemicarbazone by hydrogen peroxide in an ammoniacal medium. The reaction is monitored spectrofluorimetrically at 440 nm and with excitation at 365 nm. Two sets of reaction conditions are established to maximize the effect of manganese compared to iron, and vice versa, and the data are evaluated from simultaneous equations. Mixtures of these metal ions at ng ml^?1 levels for iron/manganese ratios from 8:1 to 1:2 can be determined with an accuracy and precition of about 3% and 1%, respectively. The methods has been applied successfully to the determination of both metals in aluminium and copper alloys, beer, cheeses and soils.     

Simultaneous kinetic spectrophotometric determination of cephalexin and trimethoprim in pharmaceutical preparation and human urine with the aid of chemometrics

A procedure for the simultaneous kinetic spectrophotometric determination of cephalexin and trimethoprim was described. It was based on the different reaction rate of oxidation of these compounds with yellow ammonium cerous （Ⅳ） sulfate in acidic medium and colorless cerous （Ⅲ） sulfate was produced. The overlapped kinetic data was quantitatively resolved by the use of chemometric methods, partial least squares （PLS）, principal component regression （PCR） and radial basis function-artificial neural network （RBF-ANN）. The proposed method was also applied to the simultaneous determination of cephalexin and trimethoprim in pharmaceutical preparation and human urine with satisfied results, which compared well with those obtained by HPLC.     

Spectrophotometric method for quantitative determination of montelukast in bulk,pharmaceutical formulations and human serum

A simple ultraviolet spectrophotometric method for the estimation of montelukast in methanol has been devised and been compared with the existing pharmacopoeial RP-HPLC method for estimation of the drug. The limit of detection of montelukast at 283 nm was 75.2 ng/mL. The calibration was linear in the range of 3–45 μg/mL. Analytical parameters such as stability, selectivity, accuracy and precision have been established for the method in MONAKA® tablets and in human serum and evaluated statistically to assess the application of the method. The method was validated under the ICH and USP guidelines and found to comprise the advantages for simplicity, stability, sensitivity, reproducibility and accuracy for using as an alternate to the existing non-spectrophotometric methods for the routine analysis of the drug in pharmaceutical formulations and in pharmaceutical investigations involving montelukast.     

Simultaneous voltammetric determination of acetylsalicylic acid,caffeine and paracetamol in pharmaceutical formulations using screen-printed carbon electrode

Electrochemical oxidation of Paracetamol (PAR), Acetylsalicylic acid (ASA) and Caffeine (CAF) was investigated employing square wave stripping voltammetry (SWSV) using screen–printed carbon electrodes (SPCE). Determinations were performed in 0.1 mol L⁻¹ BR buffer (pH 2.0) without accumulation step. SWV were obtained by scanning the potential from 0.00 to 1.40 V employing a scan increment of 4 mV, pulse amplitude 25 mV and frequency of 25 Hz. PAR, ASA and CAF presents oxidation signals at 0.45, 1.03 and 1.32 V. The detection limits were 1.2, 1.7 and 1.7 mg L⁻¹, respectively. The method was applied in the PAR-ASA-CAF determination on pharmaceutical formulations.     

Simultaneous kinetic determination of beryllium and aluminium by spectrophotometric H-point standard addition method.

The H-point standard addition method (HPSAM), based on spectrophotometric measurements for simultaneous determination of beryllium and aluminium, is described. This method is based on the difference between their rates of reactions with Chrome Azurol S (CAS) in cetyltrimethylammonium bromide (CTAB) micellar media. The results showed that beryllium and aluminium could be determined simultaneously in the ranges of 10-200 and 10-300 ng mL(-1), respectively. Under working conditions, the proposed method was successfully applied to the simultaneous determination of beryllium and aluminium in environmental, geochemical and alloy samples.     

Four spectrophotometric methods for determination of nitrofurazone in pharmaceutical formulations

Four simple and sensitive visible spectrophotometric methods (A-D) for the determination of nitrofurazone in bulk samples and pharmaceutical formulations are described. They are based on the formation of colored species by treating either its reduction product with 3-methylbenzothiazolin-2-one hydrazone in the presence of ferric chloride (method A: _max 600 nm) or its hydrolysis product with thiobarbituric acid (method B: _max 520 nm, 440 nm) or barbituric acid (method C: _max 400 nm) or by oxidizing it with excess N-bromosuccinimide and determining the consumed NBS using metol-isonicotinic acid hydrazide (method D: _max 620 nm).     

Simultaneous determination of dapsone and pyrimethamine by derivative spectrophotometry in pharmaceutical formulations

A simple and fast method was developed for the simultaneous determination of dapsone and pyrimethamine by first-order digital derivative spectrophotometry. Acetonitrile was used as a solvent to extract the drugs from the pharmaceutical formulations, and the samples were subsequently evaluated directly by digital derivative spectrophotometry. The simultaneous determination of both drugs was performed by the zero-crossing method at 249.4 and 231.4 nm for dapsone and pyrimethamine, respectively. The best signal-to-noise ratio was obtained when the first derivative of the spectrum was used. The linear range of determination for the drugs was from 6.6 x 10(-7) to 2.0 x 10(-4) and from 2.5 x 10(-6) to 2.0 x 10(-4) mol/L for dapsone and pyrimethamine, respectively. The excipients of commercial pharmaceutical formulations did not interfere in the analysis. Chemical and spectral variables were optimized for determination of both analytes. A good level of repeatability, 0.6 and 1.7% for dapsone and pyrimethamine, respectively, was observed. The proposed method was applied for the simultaneous determination of both drugs in pharmaceutical formulations.     

Simultaneous spectrophotometric determination of paracetamol, ibuprofen and caffeine in pharmaceuticals by chemometric methods

In this study, the simultaneous determination of paracetamol, ibuprofen and caffeine in pharmaceuticals by chemometric approaches using UV spectrophotometry has been reported as a simple alternative to using separate models for each component. Spectra of paracetamol, ibuprofen and caffeine were recorded at several concentrations within their linear ranges and were used to compute the calibration mixture between wavelengths 200 and 400 nm at an interval of 1 nm in methanol:0.1 HCl (3:1). Partial least squares regression (PLS), genetic algorithm coupled with PLS (GA-PLS), and principal component-artificial neural network (PC-ANN) were used for chemometric analysis of data and the parameters of the chemometric procedures were optimized. The analytical performances of these chemometric methods were characterized by relative prediction errors and recoveries (%) and were compared with each other. The GA-PLS shows superiority over other applied multivariate methods due to the wavelength selection in PLS calibration using a genetic algorithm without loss of prediction capacity. Although the components show an important degree of spectral overlap, they have been determined simultaneously and rapidly requiring no separation step. These three methods were successfully applied to pharmaceutical formulation, capsule, with no interference from excipients as indicated by the recovery study results. The proposed methods are simple and rapid and can be easily used in the quality control of drugs as alternative analysis tools.     

Selective spectrophotometric determination of paracetamol with sodium nitroprusside in pharmaceutical and biological samples

A novel simple method to determine paracetamol with good selectivity has been established by using sodium nitroprusside as the chromogenic reagent. The experiment indicates that sodium nitroprusside can react with paracetamol in a basic solution to form a product with colored O-nitrosamines. The maximal absorption wavelength (λ_max) and the apparent molar absorption coefficient of the product are 700 nm and 3.4 × 10³ L/mol cm, respectively. A Good linear relationship is obtained between the absorbance and the concentration of paracetamol in a wide range of 0.19–96 μg/mL. The linear regression equation is A = 0.01695 + 0.02240C (μg/mL), with a correlation coefficient of 0.9993. The detection limit (3σ/κ) is 0.10 μg/mL, and the relative standard deviation (RSD) is 0.90% (n = 11). The parameters with regard to determination are optimized, and the reaction mechanism is discussed. The method has been successfully applied to the selective determination of paracetamol in pharmaceutical and biological samples.     

Enzymatic determination of vitamin A in pharmaceutical formulations with spectrophotometric detection

An enzymatic method for the determination vitamin A (retinol) is reported using soluble and immobilized alcohol dehydrogenase, isolated from rabbit liver. The reaction is based on the oxidation of retinol and simultaneous reduction of NAD⁺ to NADH followed by spectrophotometric detection at 340 nm. The calibration graph was linear over the range of 2.0–10 μM with correlation coefficients of 0.9967 and 0.9992 (n = 5) for soluble and immobilized alcohol dehydrogenase respectively, with relative standard deviations (n = 3) in the range of 0.5–1.2%. The limit of detection was lower than 1.0 μM. The proposed method was applied to determine vitamin A in pharmaceuticals, and the results obtained were in reasonable agreement with the amount labeled. The results were compared using spectrophotometric reference method, and no significant difference was found between the results of the both methods.