超临界CO_2溶胀聚合物的研究及其应用

本文介绍超临界CO2 溶胀聚合物的研究及其应用 ,包括聚合物与超临界CO2 相互作用 ,溶胀行为的理论模型以及溶胀后的聚合物的用途 ,如制备微孔聚合物材料、渗透小分子和超临界溶胀聚合等     

超临界CO2在微孔聚合物制备中的应用

微孔聚合物是80年代初发明的一种新型材料,在90年代由于超临界CO2的使用而得到了很大发展,并被誉为“二十一世纪的新型材料”。本文介绍了微孔聚合物的基本制备方法、结构特点和性能,以及研究现状。特别介绍了在微孔聚合物制备中应用超临界CO2的优点,详细介绍了分步快速升温法、快速降压法和连续法的基本过程和研究成果,并对微孔聚合物的进一步发展进行了展望。     

热致相分离法制备聚烯烃微孔膜研究进展

非极性及弱极性的结晶高聚物常温下无合适的良溶剂,所以无法使用传统的非溶剂致相分离法制取微孔膜,而近年来发展的热致相分离法解决了这一问题。研究发现聚乙烯、聚丙烯、乙烯．乙烯醇共聚物、乙烯．丙烯酸共聚物、聚(4-甲基-1-戊烯)等聚烯烃是可采用热致相分离法制备微孔膜的材料。本文综述了近年来在热致相分离法制备聚烯烃微孔膜方面的研究进展,重点介绍各种制膜材料(聚合物、稀释剂、萃取剂和助剂)与各种制膜工艺对制得的聚烯烃微孔膜孔径、膜通量和非对称结构等的影响。     

用超临界CO_2制备微孔聚苯乙烯/热致液晶聚合物原位复合材料

微孔聚合物是80年代初发明的一种新型多孔材料,其特征为:泡孔直径1～10 μm,泡孔密度109～1012cells/cm3,相对密度0.05～0.95.具有缺口冲击强度高、韧性高、比强度高、疲劳寿命长、热稳定性高、介电常数低和导热系数低等优异性能.同时,制备微孔聚合物使用无公害、易回收的CO2和N2替代对臭氧层有害的氯氟烃(氟利昂)和易燃的碳氢化合物等作为发泡剂,是一种新型绿色材料[1].在微孔聚合物中使用超临界流体是90年代初提出的新方法[2～4],可缩短加工时间,同时制得泡孔直径更小、泡孔密度更大的微孔材料.目前研究中,对聚合物多相体系的研究报道很少,只有HIPS[5]、PE/iPP[6]和PVC/木纤维复合材料[7]等少数体系的报道,而聚合物多相体系的研究是材料科学的主要研究领域.可以预见,加入少量第二组分的共混物为基体的微孔材料可以达到更为优异的性能.本工作选择聚苯乙烯与热致液晶聚合物的原位复合材料为研究对象,采用超临界CO2快速降压法[3]制备微孔材料.在前期工作中,报道了该材料是一种综合了液晶聚合物的高强度和聚苯乙烯微孔材料轻质、高抗冲、保温隔音性能的具有仿生结构的新型复合材料[8].本文在此基础上,进一步研究热致液晶聚合物的加入对微孔结构的影响以及界面相容剂在微孔成型中的作用.     

热致相分离法制备聚苯硫醚微孔膜

采用热致相分离法,以己内酰胺为溶剂,制备得到了聚苯硫醚微孔膜并对薄膜性能表征.聚苯硫醚-己内酰胺体系制膜的优点之一是溶剂己内酰胺是水溶性的,可以采用纯水作为后处理的萃取剂.选择了合适的浓度,利用压制成型法制备聚苯硫醚平板膜;研究了体系冷却时的相行为,并考察了降温速率、聚合物浓度等因素对微孔形态与薄膜性能的影响.研究表明,聚苯硫醚-己内酰胺体系以固液分相为主,萃取后形成球晶状的微孔结构.降温速率对薄膜的微孔形态、孔径以及连通性有重要影响;当体系以较低降温速率冷却时,多孔形态为枝叶状,形成了更多的开孔结构并获得了更大的孔径,这是获得高通量微孔膜的主要原因.通过控制降温速率可以制备纯水通量大于100 L/m2h,孔径约4～5μm且连通性良好的聚苯硫醚微孔膜;研究了聚合物浓度的影响,薄膜的纯水通量随着聚合物浓度的增大而减小,并且当聚苯硫醚浓度>50 wt%时,由于大于临界浓度而失去渗透性.     

共溶剂对超临界CO2注入技术制备聚丙烯/SiO2纳米复合材料的影响

采用超临界CO2注入技术制备聚合物-无机纳米粒子复合材料, 以乙醇作为共溶剂, 在超临界CO2中将正硅酸乙酯(TEOS)注入到聚丙烯(PP)中, 重点研究共溶剂乙醇对TEOS在PP中注入率的影响. 实验结果表明注入率随着共溶剂加入先增加后减小. 同时研究了在共溶剂的存在下其他实验条件对注入率的影响. 并采用卢瑟福背散射能谱法(RBS)分析了聚丙烯/SiO2纳米复合材料的注入元素深度分布, 发现Si元素在PP中的浓度分布不均匀, 随着深度的增加而减小.     

共溶剂对超临界CO_2注入技术制备聚丙烯/SiO_2纳米复合材料的影响(英文)

采用超临界CO2注入技术制备聚合物-无机纳米粒子复合材料,以乙醇作为共溶剂,在超临界CO2中将正硅酸乙酯(TEOS)注入到聚丙烯(PP)中,重点研究共溶剂乙醇对TEOS在PP中注入率的影响.实验结果表明注入率随着共溶剂加入先增加后减小.同时研究了在共溶剂的存在下其他实验条件对注入率的影响.并采用卢瑟福背散射能谱法(RBS)分析了聚丙烯/SiO2纳米复合材料的注入元素深度分布,发现Si元素在PP中的浓度分布不均匀,随着深度的增加而减小.     

聚乙二醇对聚醚砜微孔膜致孔作用的研究

以聚醚砜聚乙二醇溶剂为铸膜液体系、采用干湿相转化法制备微孔滤膜,研究了各种制膜条件对膜孔径结构的影响.实验发现聚乙二醇在体系中起到分散稳定的作用,只有到浓度大于70%时,才会对铸膜液的粘度产生明显影响,聚合物在铸膜液中的溶解状态也随之改变,进而影响膜的结构.不同溶剂NMP、DMF、DMAc、DMSO等极性溶剂或固体溶剂己内酰胺均可制得开孔率较高的微孔膜,但对膜的结构和性能影响差别不大.在本研究体系中,膜的结构取决于聚乙二醇、溶剂的浓度比例关系.     

聚合物/TiO2杂化纳米纤维微孔膜的制备及其在染料敏化太阳能电池中的应用

利用静电纺丝技术,制备了不同的聚合物/TiO2杂化纳米纤维微孔膜,吸附液体电解质后形成聚合物/TiO2杂化纳米纤维微孔膜准固态电解质,应用于制备准固态染料敏化太阳能电池(DSSCs).测试了电纺聚合物纳米纤维微孔膜电解质的吸液率、孔隙率、离子电导率等参数,研究了纳米纤维微孔膜准固态电解质DSSCs的光伏性能.结果显示,TiO2的掺入可提高聚合物/TiO2杂化纳米纤维微孔膜对液态电解质的浸润扩散性能,从而提高纳米纤维微孔膜对液态电解质的吸附能力.组装的DSSCs的光电转换效率可达液态电解质的90%以上,并具有较好的长期工作稳定性.     

基于静态呼吸图技术的图案化方法

对呼吸图技术制备二维有序多孔结构的研究进展进行了综合评述, 并重点介绍了本课题组发展的静态呼吸图技术. 利用静态呼吸图法, 可制备高度有序的聚合物、聚合物/无机物微孔膜. 这些有序的结构可以直接应用于光掩膜. 进一步, 多孔聚合物膜可以被紫外光交联和改性. 表面改性的多孔聚合物膜可以用于细胞支架. 而交联的聚合物/无机物前驱体微孔膜可以用来制备无机纳米材料阵列. 结果表明, 静态呼吸图技术是一种简单、高效的对聚合物、聚合物/无机物薄膜进行图案化的通用方法,并展示了图案化薄膜广阔的功能化前景.     

Tuning microcavities in thermally rearranged polymer membranes for CO2 capture

Microporous materials have a great importance in catalysis, delivery, storage and separation in terms of their performance and efficiency. Most microporous materials are comprised of inorganic frameworks, while thermally rearranged (TR) polymers are a microporous organic polymer which is tuned to optimize the cavity sizes and distribution for difficult separation applications. The sub-nano sized microcavities are controlled by in situ thermal treatment conditions which have been investigated by positron annihilation lifetime spectroscopy (PALS). The size and relative number of cavities increased from room temperature to 230 °C resulting in improvements in both permeabilities and selectivities for H(2)/CO(2) separation due to the significant increase of gas diffusion and decrease of CO(2) solubility. The highest performance of the well-tuned TR-polymer membrane was 206 Barrer for H(2) permeability and 6.2 of H(2)/CO(2) selectivity, exceeding the polymeric upper bound for gas separation membranes.     

氯化锂为添加剂制得的疏水聚偏氟乙烯不对称微孔膜的形态结构及其膜蒸馏性能

结合膜的形态结构研究了以 LiCl为添加剂制得的疏水 PVDF膜的膜蒸馏性能。与来用水溶液高分子添加剂制得的PVDF微孔膜相比,膜蒸馏性能有了较大提高,尤其具有更高的截留率。制得的微孔膜的蒸馏通量已接近商品膜的膜蒸馏通量,表明以LiCl为添加剂制得的PVDF疏水微孔膜是一种适用于膜蒸馏的较理想的疏水微孔膜。     

膜相渗透原位化学聚合法制备PAn/CA复合透膜

采用膜相渗透原位化学聚合法,使苯胺(An)原位化学聚合于醋酸纤维素(CA)基体膜的微孔壁中,得到均匀分布的PAn/CA复合导电透膜.通过研究聚合反应条件对复合透膜的导电性能和CO₂/O₂表观分离性能的影响,获得了制备性能较优的PAn/CA复合导电透膜的适宜条件.结果表明,采用膜相渗透化学原位聚合法制备的PAn/CA复合导电透膜,平均孔径明显变小,孔径分布变窄,具有优于CA基体膜的微孔结构形态.     

GAS PERMEATION THROUGH COMMERCIAL MICROPOROUS NICKEL MEMBRANES

An experimental study of gas permeation through a commercial microporous nickel membrane was carried out. The membrane used in the study has an asymmetrical two-layer structure with an effective pore diameter of 20 nm, a porosity of about 37% and a total thickness of about 50 urn. The permeabilities of pure H2, N2, CH4, CO, CO2 and Ar through the membrane were measured at various temperatures (range 298 - 573 K) and pressures (range 5 - 86 kPa). The temperature influence on the membrane structure was also initially analysed by a DSC method.     

微孔型聚丙烯腈固体电解质的结构与导电性能研究

用蒸汽相沉析法和液相沉析法分别制备了两类高孔隙率的聚丙烯腈 (PAN)微孔膜 .用扫描电子显微镜对微孔膜的形态进行了观察 ,发现前者为均匀的蜂窝状结构 ,而后者则具有不对称的三层次结构 .又用这两类微孔膜分别制备了两个系列的微孔型PAN电解质 .电性能测试表明前者的室温电导率较高 ,可以达到 4×10 - 3 S cm ,后者的电导率则相对较低 .微孔膜本身诸因素对微孔型PAN电解质电导率的影响顺序为微孔膜结构—孔隙率—微孔孔径     

Synthesis of Pd particle-deposited microporous silica membranes via a vacuum-impregnation method and their gas permeation behavior

Pd particle-deposited microporous silica membranes were synthesized to improve hydrogen permselectivity of the microporous silica membrane and to overcome high cost of palladium and crack formation through hydrogen embrittlement. Pd particles below 400 nm in diameter were readily deposited on the microporous silica membrane via a vacuum-impregnation method by using a Pd(C(3)H(5))(C(5)H(5)) precursor. After deposition of Pd particles on the microporous silica membrane, hydrogen permselectivity over nitrogen considerably increased from 11-28 to 30-115 in a permeation temperature range of 25-350 degrees C due to plugging membrane defects and hydrogen adsorption diffusion through the interface between the Pd and silica layer. The activation energy of the Pd-deposited silica membrane (6.32 kJ mol(-1)) was higher than that of the microporous silica membrane (4.22 kJ mol(-1)). In addition, the Pd-particle deposition led to an increase in the permselectivity of He and CO(2) with little chemical affinity for the Pd particles, which indicates that Pd-particle deposition gives the effect of plugging defects such as pinholes or cracks, which could be formed during the membrane preparation. Therefore it is demonstrated that Pd-particle deposition on the silica membrane is effective for induction of the hydrogen adsorption diffusion and plugging membrane defects.     

Selective Carbon Dioxide Capture in Antifouling Indole-based Microporous Organic Polymers

Intermolecular synergistic adsorption of indole and carbonyl groups induced by intermolecular hydrogen bonding makes microporous organic polymer(PTICBL)exhibit high CO2 uptake capacity(5.3 mmol·g^-1at 273 K)and selectivities(CO2/CH4=53,CO2/N2=107 at 273 K).In addition,we find that indole units in the PTICBL networks inhibit the attachment of bacteria(E.coil and S.aureus)on the surface of PTICBL and extend its service life in CO2 capture.     

Microporous Polyamide Membranes for Molecular Sieving of Nitrogen from Volatile Organic Compounds

Microporous polymer membranes continue to receive tremendous attention for energy-efficient gas separation processes owing to their high separation performances. A new network microporous polyamide membrane with good molecular-sieving performance for the separation of N₂ from a volatile organic compound (VOC) mixture is described. Triple-substituted triptycene was used as the main monomer to form a fisherman's net-shaped polymer, which readily forms a composite membrane by solution casting. This membrane exhibited outstanding separation performance and good stability for the molecular-sieving separation of N₂ over VOCs such as cyclohexane. The rejection rate of the membrane reached 99.2 % with 2098 Barrer N₂ permeability at 24 °C under 4 kPa. This approach promotes development of microporous membranes for separation of condensable gases.     

MICROPOROUS PVDF-HFP-BASED POLYMER MEMBRANES FORMED FROM SUPERCRITICAL CO2 INDUCED PHASE SEPARATION

Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were formed by microporous PVDF-HFP membranes filled and swollen by a liquid electrolyte.The effect of the solvents on the morphology and structure,electrolyte absorptions and lithium ionic conductivity of the activated membranes were investigated.It was approved that all the membrane had the simi...