Study of numerical errors in direct numerical simulation and large eddy simulation

By comparing the energy spectrum and total kinetic energy, the effects of numerical errors (which arise from aliasing and discretization errors), subgrid-scale (SGS) models, and their interactions on direct numerical simulation (DNS) and large eddy simulation (LES) are investigated. The decaying isotropic turbulence is chosen as the test case. To simulate complex geometries, both the spectral method and Pade compact difference schemes are studied. The truncated Navier-Stokes (TNS) equation model with Pade discrete filter is adopted as the SGS model. It is found that the discretization error plays a key role in DNS. Low order difference schemes may be unsuitable. However, for LES, it is found that the SGS model can represent the effect of small scales to large scales and dump the numerical errors. Therefore, reasonable results can also be obtained with a low order discretization scheme.     

Parallel FEM LES with one-equation subgrid-scale model for incompressible flows

This article develops a parallel large-eddy simulation (LES) with a one-equation subgrid-scale (SGS) model based on the Galerkin finite element method and three-dimensional (3D) brick elements. The governing filtered Navier–Stokes equations were solved by a second-order accurate fractional-step method, which decomposed the implicit velocity–pressure coupling in incompressible flow and segregated the solution to the advection and diffusion terms. The transport equation for the SGS turbulent kinetic energy was solved to calculate the SGS processes. This FEM LES model was applied to study the turbulence of the benchmark open channel flow at a Reynolds number Re_τ = 180 (based on the friction velocity and channel height) using different model constants and grid resolutions. By comparing the turbulence statistics calculated by the current model with those obtained from direct numerical simulation (DNS) and experiments in literature, an optimum set of model constants for the current FEM LES model was established. The budgets of turbulent kinetic energy and vertical Reynolds stress were then analysed for the open channel flow. Finally, the flow structures were visualised to further reveal some important characteristics. It was demonstrated that the current model with the optimum model constants can predict well the organised structure near the wall and free surface, and can be further applied to other fundamental and engineering applications.     

Wall modeling for implicit large-eddy simulation and immersed-interface methods

We propose and analyze a wall model based on the turbulent boundary layer equations (TBLE) for implicit large-eddy simulation (LES) of high Reynolds number wall-bounded flows in conjunction with a conservative immersed-interface method for mapping complex boundaries onto Cartesian meshes. Both implicit subgrid-scale model and immersed-interface treatment of boundaries offer high computational efficiency for complex flow configurations. The wall model operates directly on the Cartesian computational mesh without the need for a dual boundary-conforming mesh. The combination of wall model and implicit LES is investigated in detail for turbulent channel flow at friction Reynolds numbers from Re _τ  = 395 up to Re _τ =100,000 on very coarse meshes. The TBLE wall model with implicit LES gives results of better quality than current explicit LES based on eddy viscosity subgrid-scale models with similar wall models. A straightforward formulation of the wall model performs well at moderately large Reynolds numbers. A logarithmic-layer mismatch, observed only at very large Reynolds numbers, is removed by introducing a new structure-based damping function. The performance of the overall approach is assessed for two generic configurations with flow separation: the backward-facing step at Re _h = 5,000 and the periodic hill at Re _H = 10,595 and Re _H = 37,000 on very coarse meshes. The results confirm the observations made for the channel flow with respect to the good prediction quality and indicate that the combination of implicit LES, immersed-interface method, and TBLE-based wall modeling is a viable approach for simulating complex aerodynamic flows at high Reynolds numbers. They also reflect the limitations of TBLE-based wall models.     

Large-eddy simulation of turbulent channel flow at transcritical states

We present well-resolved large-eddy simulations (LES) of a channel flow solving the fully compressible Navier–Stokes equations in conservative form. An adaptive look-up table method is used for thermodynamic and transport properties. A physically consistent subgrid-scale turbulence model is incorporated, that is based on the Adaptive Local Deconvolution Method (ALDM) for implicit LES. The wall temperatures are set to enclose the pseudo-boiling temperature at a supercritical pressure, leading to strong property variations within the channel geometry. The hot wall at the top and the cold wall at the bottom produce asymmetric mean velocity and temperature profiles which result in different momentum and thermal boundary layer thicknesses. Different turbulent Prandtl number formulations and their components are discussed in context of strong property variations.     

On the performance of WENO/TENO schemes to resolve turbulence in DNS/LES of high‐speed compressible flows

High‐speed compressible turbulent flows typically contain discontinuities and have been widely modeled using Weighted Essentially Non‐Oscillatory (WENO) schemes due to their high‐order accuracy and sharp shock capturing capability. However, such schemes may damp the small scales of turbulence and result in inaccurate solutions in the context of turbulence‐resolving simulations. In this connection, the recently developed Targeted Essentially Non‐Oscillatory (TENO) schemes, including adaptive variants, may offer significant improvements. The present study aims to quantify the potential of these new schemes for a fully turbulent supersonic flow. Specifically, DNS of a compressible turbulent channel flow with M = 1.5 and Re_τ = 222 is conducted using OpenSBLI, a high‐order finite difference computational fluid dynamics framework. This flow configuration is chosen to decouple the effect of flow discontinuities and turbulence and focus on the capability of the aforementioned high‐order schemes to resolve turbulent structures. The effect of the spatial resolution in different directions and coarse grid implicit LES are also evaluated against the WALE LES model. The TENO schemes are found to exhibit significant performance improvements over the WENO schemes in terms of the accuracy of the statistics and the resolution of the three‐dimensional vortical structures. The sixth‐order adaptive TENO scheme is found to produce comparable results to those obtained with nondissipative fourth‐ and sixth‐order central schemes and reference data obtained with spectral methods. Although the most computationally expensive scheme, it is shown that this adaptive scheme can produce satisfactory results if used as an implicit LES model.     

Validation of large eddy simulation method for study of flatness and skewness of decaying compressible magnetohydrodynamic turbulence

In the present work we study potential applicability of large eddy simulation (LES) method for prediction of flatness and skewness of compressible magnetohydrodynamic (MHD) turbulence. The knowledge of these quantities characterizes non-Gaussian properties of turbulence and can be used for verification of hypothesis on Gaussianity for the turbulent flow under consideration. Prediction accuracy of these quantities by means of LES method directly determines efficiency of reconstruction of probability density function (PDF) that depends on used subgrid-scale (SGS) parameterizations. Applicability of LES approach for studying of PDF properties of turbulent compressible magnetic fluid flow is investigated and potential feasibilities of five SGS parameterizations by means of comparison with direct numerical simulation results are explored. The skewness and the flatness of the velocity and the magnetic field components under various hydrodynamic Reynolds numbers, sonic Mach numbers, and magnetic Reynolds numbers are studied. It is shown that various SGS closures demonstrate the best results depending on change of similarity numbers of turbulent MHD flow. The case without any subgrid modeling yields sufficiently good results as well. This indicates that the energy pile-up at the small scales that is characteristic for the model without any subgrid closure, does not significantly influence on determination of PDF. It is shown that, among the subgrid models, the best results for studying of the flatness and the skewness of velocity and magnetic field components are demonstrated by the Smagorinsky model for MHD turbulence and the model based on cross-helicity for MHD case. It is visible from the numerical results that the influence of a choice subgrid parametrization for the flatness and the skewness of velocity is more essential than for the same characteristics of magnetic field.     

Subgrid-scale contributions to Lagrangian time correlations in isotropic turbulence

The application of large-eddy simulation （LES） to particle-laden turbulence raises such a fundamental question as whether the LES with a subgrid scale （SGS） model can correctly predict Lagrangian time correlations （LTCs）. Most of the currently existing SGS models are constructed based on the energy budget equations. Therefore, they are able to correctly predict energy spectra, but they may not ensure the correct prediction on the LTCs. Previous researches investigated the effect of the SGS modeling on the Eulerian time correlations. This paper is devoted to study the LTCs in LES. A direct numerical simulation （DNS） and the LES with a spectral eddy viscosity model are performed for isotropic turbulence and the LTCs are calculated using the passive vector method. Both a priori and a posteriori tests are carried out. It is observed that the subgrid;scale contributions to the LTCs cannot be simply ignored and the LES overpredicts the LTCs than the DNS. It is concluded from the straining hypothesis that an accurate prediction of enstrophy spectra is most critical to the prediction of the LTCs.     

Direct and large eddy simulation of stratified turbulence

Simulations of geophysical turbulent flows require a robust and accurate subgrid-scale turbulence modeling. To evaluate turbulence models for stably stratified flows, we performed direct numerical simulations (DNSs) of the transition of the three-dimensional Taylor–Green vortex and of homogeneous stratified turbulence with large-scale horizontal forcing. In these simulations we found that energy dissipation is concentrated within thin layers of horizontal tagliatelle-like vortex sheets between large pancake-like structures. We propose a new implicit subgrid-scale model for stratified fluids, based on the Adaptive Local Deconvolution Method (ALDM). Our analysis proves that the implicit turbulence model ALDM correctly predicts the turbulence energy budget and the energy spectra of stratified turbulence, even though dissipative structures are not resolved on the computational grid.     

Assessment of the modulated gradient model in decaying isotropic turbulence

A recently introduced nonlinear model undergoes evaluations based on two isotropic turbulent cases: a University of Wiscosion-Madison case at a moderate Reynolds number and a Johns Hopkins University case at a high Reynolds number. The model uses an estimation of the subgrid-scale (SGS) kinetic energy to model the magnitude of the SGS stress tensor, and uses the normalized velocity gradient tensor to model the structure of the SGS stress tensor. Testing is performed for the first case through a comparison between direct numerical simulation (DNS) results and large eddy simulation (LES) results regarding resolved kinetic energy and energy spectrum. In the second case, we examine the resolved kinetic energy, the energy spectrum, as well as other key statistics including the probability density functions of velocities and velocity gradients, the skewness factors, and the flatness factors. Simulations using the model are numerically stable, and results are satisfactorily compared with DNS results and consistent with statistical theories of turbulence.     

Large Eddy Simulations Using an Unstructured Grid Compressible Navier - Stokes Algorithm

Large Eddy Simulation (LES) of the decay of isotropic turbulence and of channel flow has been performed using an explicit second-order unstructured grid algorithm for tetrahedral cells. The algorithm solves for cell-averaged values using the finite volume form of the unsteady compressible Jittered Navier-Stokes equations. The inviscid fluxes are obtained from Godunov's exact Riemann solver. Reconstruction of the flow variables to the left and right sides of each face is performed using least squares or Frink's method. The viscous fluxes and heat transfer are obtained by application of Gauss' theorem. LES of the decay of nearly incompressible isotropic turbulence has been performed using two models for the SGS stresses: the Monotone Integrated Large Eddy Simulation (MILES) approach, wherein the inherent numerical dissipation models the sub-grid scale (SGS) dissipation, and the Smagorinsky SGS model. The results using the MILES approach with least squares reconstruction show good agreement with incompressible experimental data. The contribution of the Smagorinsky SGS model is negligible. LES of turbulent channel flow was performed at a Reynolds number (based on channel height and bulk velocity) of 5600 and Mach number of 0.5 (at which compressibility effects are minimal) using Smagorinsky's SGS model with van Driest damping. The results show good agreement with experimental data and direct numerical simulations for incompressible channel flow. The SGS eddy viscosity is less than 10% of the molecular viscosity, and therefore the LES is effectively MILES with molecular viscosity.     

Non-Equilibrium Mixing of Turbulence Scales Using a Continuous Hybrid RANS/LES Approach: Application to the Shearless Mixing Layer

A new subgrid-scale (SGS) model based on partially integrated transport method (PITM) is applied to the case of a turbulent spectral non-equilibrium flow created by the mixing of two turbulence fields of differing scales: the shearless mixing layer. The method can be viewed as a continuous hybrid RANS/LES approach. In this model the SGS length scale is no longer given by the size of the discretization step, but is dynamically estimated using an additional transport equation for the dissipation rate. The results are compared to those corresponding to the classical model of Smagorinsky and to the experimental data of Veeravalli and Warhaft. A method for creating an anisotropic analytical pseudo-random field for inflow conditions is also proposed. This approach based on subgrid-scale transport modelling combined with anisotropic inlet conditions gives better results for the prediction of the shearless mixing layer.     

An improved anisotropy-resolving subgrid-scale model for flows in laminar–turbulent transition region

Some types of mixed subgrid-scale (SGS) models combining an isotropic eddy-viscosity model and a scale-similarity model can be used to effectively improve the accuracy of large eddy simulation (LES) in predicting wall turbulence. Abe (2013) has recently proposed a stabilized mixed model that maintains its computational stability through a unique procedure that prevents the energy transfer between the grid-scale (GS) and SGS components induced by the scale-similarity term. At the same time, since this model can successfully predict the anisotropy of the SGS stress, the predictive performance, particularly at coarse grid resolutions, is remarkably improved in comparison with other mixed models. However, since the stabilized anisotropy-resolving SGS model includes a transport equation of the SGS turbulence energy, k_SGS, containing a production term proportional to the square root of k_SGS, its applicability to flows with both laminar and turbulent regions is not so high. This is because such a production term causes k_SGS to self-reproduce. Consequently, the laminar–turbulent transition region predicted by this model depends on the inflow or initial condition of k_SGS. To resolve these issues, in the present study, the mixed-timescale (MTS) SGS model proposed by Inagaki et al. (2005) is introduced into the stabilized mixed model as the isotropic eddy-viscosity part and the production term in the k_SGS transport equation. In the MTS model, the SGS turbulence energy, k_es, estimated by filtering the instantaneous flow field is used. Since the k_es approaches zero by itself in the laminar flow region, the self-reproduction property brought about by using the conventional k_SGS transport equation model is eliminated in this modified model. Therefore, this modification is expected to enhance the applicability of the model to flows with both laminar and turbulent regions. The model performance is tested in plane channel flows with different Reynolds numbers and in a backward-facing step flow. The results demonstrate that the proposed model successfully predicts a parabolic velocity profile under laminar flow conditions and reduces the dependence on the grid resolution to the same degree as the unmodified model by Abe (2013) for turbulent flow conditions. Moreover, it is shown that the present model is effective at transitional Reynolds numbers. Furthermore, the present model successfully provides accurate results for the backward-facing step flow with various grid resolutions. Thus, the proposed model is considered to be a refined anisotropy-resolving SGS model applicable to laminar, transitional, and turbulent flows.     

LES-based filter-matrix lattice Boltzmann model for simulating fully developed turbulent channel flow

In this paper, a three-dimensional filter-matrix lattice Boltzmann (FMLB) model based on large eddy simulation (LES) was verified for simulating wall-bounded turbulent flows. The Vreman subgrid-scale model was employed in the present FMLB–LES framework, which had been proved to be capable of predicting turbulent near-wall region accurately. The fully developed turbulent channel flows were performed at a friction Reynolds number Re_τ of 180. The turbulence statistics computed from the present FMLB–LES simulations, including mean stream velocity profile, Reynolds stress profile and root-mean-square velocity fluctuations greed well with the LES results of multiple-relaxation-time (MRT) LB model, and some discrepancies in comparison with those direct numerical simulation (DNS) data of Kim et al. was also observed due to the relatively low grid resolution. Moreover, to investigate the influence of grid resolution on the present LES simulation, a DNS simulation on a finer gird was also implemented by present FMLB–D3Q19 model. Comparisons of detailed computed various turbulence statistics with available benchmark data of DNS showed quite well agreement.     

基于人工神经网络的湍流大涡模拟方法

大涡模拟方法(LES)是研究复杂湍流问题的重要工具,在航空航天、湍流燃烧、气动声学、大气边界层等众多工程领域中具有广泛的应用前景.大涡模拟方法采用粗网格计算大尺度上的湍流结构,并用亚格子(SGS)模型近似表达滤波尺度以下的流动结构对大尺度流场的作用.传统的亚格子模型由于只利用了单点流场信息和简单的函数关系,在先验验证中相对误差较大, 在后验验证中耗散过强. 近几年来,机器学习方法在湍流建模问题中得到了越来越多的应用.本文介绍了基于人工神经网络(ANN)的湍流亚格子模型的最新进展.详细地讨论了人工神经网络混合模型、空间人工神经网络模型和反卷积人工神经网络模型的构造方法.借助于人工神经网络强大的数据插值能力,新的亚格子模型的先验精度和后验精度均有显著提升. 在先验验证中,新模型所预测的亚格子应力的相关系数超过了0.99,在预测精度上远高于传统的大涡模拟模型. 在后验验证中,新模型对各类湍流统计量和瞬态流动结构的预测都优于隐式大涡模拟方法、动态Smagorinsky模型、动态混合模型等传统模型.因此, 人工神经网络方法在发展复杂湍流的先进大涡模拟模型中具有很大的潜力.      

旋转圆管湍流的大涡模拟数值研究

采用大涡模拟（LES）方法,并结合动力学亚格子尺度应力（SGS）模型,通过数值求解柱坐标系下的滤波Navier-Stokes方程,研究了绕管轴旋转圆管内的湍流流动特性.为验证计算的可靠性,以及动力学SGS模型对于旋转湍流的适用性,将大涡模拟计算所得的结果,与相应的直接模拟（DNS）结果和实验数据进行了对比验证,吻合良好.进一步对旋转圆管湍流的物理机理进行了探讨,研究了湍流特性随旋转速率的变化规律.当旋转速率增加时,湍流流动有层流化的发展趋势.基于湍动能变化的关系,分析了旋转效应对湍流脉动生成的抑制作用.     

Numerical study of an oscillatory turbulent flow over a flat plate

Oscillatory turbulent flow over a flat plate is studied using large eddy simulation (LES) and Reynolds-average Navier-Stokes (RANS) methods. A dynamic subgrid-scale model is employed in LES and Saffman's turbulence model is used in RANS. The flow behaviors are discussed for the accelerating and decelerating phases during the oscillating cycle. The friction force on the wall and its phase shift from laminar to turbulent regime are also investigated for different Reynolds numbers. The project supported by the Youngster Funding of Academia Sinica and by the National Natural Science Foundation of China     

Large eddy simulation of high-Reynolds-number atmospheric boundary layer flow with improved near-wall correction

It is highly attractive to develop an efficient and flexible large eddy simulation(LES) technique for high-Reynolds-number atmospheric boundary layer(ABL) simulation using the low-order numerical scheme on a relatively coarse grid, that could reproduce the logarithmic profile of the mean velocity and some key features of large-scale coherent structures in the outer layer. In this study, an improved near-wall correction scheme for the vertical gradient of the resolved streamwise velocity in the s...     

Swirling-strength based large eddy simulation of turbulent flow around single square cylinder at low Reynolds numbers

In view of the fact that large scale vortices play the substantial role of momentum transport in turbulent flows, large eddy simulation(LES) is considered as a better simulation model. However, the sub-grid scale(SGS) models reported so far have not ascertained under what flow conditions the LES can lapse into the direct numerical simulation. To overcome this discrepancy, this paper develops a swirling strength based the SGS model to properly model the turbulence intermittency, with the primary characteristics that when the local swirling strength is zero, the local sub-grid viscosity will be vanished. In this paper, the model is used to investigate the flow characteristics of zero-incident incompressible turbulent flows around a single square cylinder(SC)at a low Reynolds number range Re ∈ [103, 104]. The flow characteristics investigated include the Reynolds number dependence of lift and drag coefficients, the distributions of time-spanwise averaged variables such as the sub-grid viscosity and the logarithm of Kolmogorov micro-scale to the base of 10 at Re = 2 500 and 104, the contours of spanwise and streamwise vorticity components at t = 170. It is revealed that the peak value of sub-grid viscosity ratio and its root mean square(RMS) values grow with the Reynolds number. The dissipation rate of turbulent kinetic energy is larger near the SC solid walls.The instantaneous factor of swirling strength intermittency(FSI) exhibits some laminated structure involved with vortex shedding.     

Comparative study of implicit and subgrid‐scale model large‐eddy simulation techniques for low‐Reynolds number airfoil applications

A computational study of a high‐fidelity, implicit large‐eddy simulation (ILES) technique with and without the use of the dynamic Smagorinsky subgrid‐scale (SGS) model is conducted to examine the contributions of the SGS model on solutions of transitional flow over the SD7003 airfoil section. ILES without an SGS model has been shown in the past to produce comparable and sometimes favorable results to traditional SGS‐based large‐eddy simulation (LES) when applied to canonical turbulent flows. This paper evaluates the necessity of the SGS model for low‐Reynolds number airfoil applications to affirm the use of ILES without SGS‐modeling for a broader class of problems such as those pertaining to micro air vehicles and low‐pressure turbines. It is determined that the addition of the dynamic Smagorinsky model does not significantly affect the time‐mean flow or statistical quantities measured around the airfoil section for the spatial resolutions and Reynolds numbers examined in this study. Additionally, the robustness and reduced computational cost of ILES without the SGS model demonstrates the attractiveness of ILES as an alternative to traditional LES. Published 2012. This article is a US Government work and is in the public domain in the USA.     

Spectral structure of stratified turbulence: direct numerical simulations and predictions by large eddy simulation

Density stratification has a strong impact on turbulence in geophysical flows. Stratification changes the spatial turbulence spectrum and the energy transport and conversion within the spectrum. We analyze these effects based on a series of direct numerical simulations (DNS) of stratified turbulence. To facilitate simulations of real-world problems, which are usually beyond the reach of DNS, we propose a subgrid-scale turbulence model for large eddy simulations of stratified flows based on the Adaptive Local Deconvolution Method (ALDM). Flow spectra and integral quantities predicted by ALDM are in excellent agreement with direct numerical simulation. ALDM automatically adapts to strongly anisotropic turbulence and is thus a suitable tool for studying turbulent flow phenomena in atmosphere and ocean.