Numerical study of a near-zero-index acoustic metamaterial

This Letter studies a two-dimensional, membrane-based acoustic metamaterial with a near-zero refractive index. It yields a frequency-dependent effective density that is near-zero at a narrow frequency band centered around its first resonant frequency. This effective density results in its near-zero refractive index. Numerical simulations are shown which demonstrate that the phase in this metamaterial undergoes small changes, and the metamaterial functions as an angular filter such that only a wave with a near-zero incident angle can transmit. Its ability to tailor acoustic phase pattern is also discussed in this Letter.     

Controlled construction of nanostructures in graphene

We report on the laser-assisted fabrications of nanostructures in graphene membranes supported on polymer films. By using a laser beam to deposit heat locally, irradiated polymer instantaneously melts and vaporizes. During laser drilling of the polymer, the single-layer graphene membrane adheres to the polymer surface and consequently forms tens of nanometer deep wells. Due to the short time scale of laser irradiation, heat diffusion in the polymer is negligible, and the excitation energy is highly confined in the polymer. As a result, graphene nanowells of hundreds of nanometers in diameter can be pat- terned with high fidelity. With the increasing of nanowell density, we observe the spontaneous formation of nanowrinkles connecting pairs of nanowells in the graphene membranes. Importantly, Raman spectra confirm that no defects are intro- duced in graphene membranes by laser irradiation under our experimental conditions. Our results highlight the possibility to construct nanostructures and to design novel devices based on graphene.     

Parabolic Split Ring Resonator (PSRR) based MNZ metamaterial with angular rotation for WiFi/WiMax/Wireless/ISM band applications

The engineering in artificial inclusions of metamaterials has immense potential to explore in the field of electromagnetic wave manipulation that created enormous opportunities in the design of millimetre or sub-millimetres structures. In this research paper, Parabolic Split Ring Resonator (PSRR) based MNZ (Mu-Near-Zero) metamaterial with a wider refractive index is introduced for WiFi/WiMax/Wireless/ISM band applications and printing on Rogers RT-5880 lossy substrate with a copper-based metallic structure at 5.8 GHz within the microwave frequency region. The resonant frequency, negative permittivity, near-zero permeability, and negative refractive index are between 5.5-6.3 GHz. This proposed metamaterial structure is analysed with array structures, different substrate material, different orientations, and split gaps.     

Realisation of a humidity sensor based on perfect metamaterial absorber

In this paper, we have proposed and investigated a humidity sensor based on perfect metamaterial absorber. The sensor is composed of three layers, which are metallic particle array on the top, porous silicon in the middle layer and metallic film at the bottom. According to the effective medium approximation, the effective permittivity of porous silicon is mainly determined by the filling fraction of water condensation. It is shown that the resonant wavelength displays significant red-shift with the increasing effective permittivity of porous silicon. Furthermore, the simulation results indicate that the refractive index sensitivity of absorber is high to 249 nm/RIU, which makes our structure be an ideal candidate for evaluating the humidity of environment.     

Theoretical and experimental investigation of negative index fishnet metamaterial multilayers in the Q-band

We investigate the electromagnetic properties of stacked metamaterial layers composed of modified fishnet structures at around 40?GHz. The designed planar multilayer exhibits theoretically high transmission of ?0.5?dB, low reflection, and a large negative index bandwidth with a record figure of merit higher than 36 at 38.5?GHz. Good agreement between simulation and measurement results is observed. We also verify experimentally the resolution of the negative index metamaterial stack and the focusing ability of the plano-concave lens configuration.     

Dielectric metamaterials based on electric and magnetic resonances of silicon carbide particles

Silicon carbide particles exhibit both electric and magnetic optical resonances, allowing unexplored dielectric metamaterial designs. Experimental extinction spectra and Mie theory calculations of single microscale rod-shaped particles reveal three observable midinfrared resonant modes. Two of the modes are degenerate, with a frequency that can be tuned according to a resonance condition derived within the Letter. The existence of both electric and magnetic resonances may enable a novel negative refractive index metamaterial design.     

Negative refractive index in non-resonance spectrum area

A new concept to realize negative refractive index in non-resonance spectrum using chiral metamaterial is proposed.A low-index metamaterial is added to diminish the effective refractive index of the combined structure.Simulation and material parameter retrieval procedures are carried out to determine material performances.Results show evidence of negative refractive index and strong optical activity in the new chiral metamaterial.     

工字形太赫兹超材料吸波体的传感特性研究

利用超材料吸波体对材料参数的电磁响应, 可将其应用于传感. 本文设计了一种工字形单元结构的超材料吸波体, 基于频域算法对其在太赫兹频段的传感特性进行数值模拟, 研究了待测样品折射率、厚度及电介质隔层厚度对超材料吸波体传感器的频率灵敏度、振幅灵敏度及品质因数的影响. 研究结果表明:当待测样品厚度为40 μm时, 折射率频率灵敏度可达到153.17 GHz/RIU, 折射率振幅灵敏度可达到41.37%/RIU; 待测样品折射率一定时, 厚度频率灵敏度随其厚度的增大而线性减小; 随着待测样品厚度的增加, RFOM呈增大趋势, 但增大幅度在逐渐减小; TFOM随待测样品厚度的增加而减小.     

一种基于开口空心球的声学超材料

提出了一种基于局域共振的开口空心球(spilt hollow spheres,SHS)模型,数值计算和声学透射实验结果表明基于该模型的声学超材料可以实现负的弹性模量.为了说明SHS的局域共振性质,研究了微结构SHS几何尺寸(例如开口孔径d和空心球直径D)变化时材料的透射性质,结果表明SHS的几何尺寸的改变对声学超材料的透射吸收峰频率有显著影响.另外,还研究了SHS不同排列方式对透射行为的影响,发现单层样品中SHS单元数目以及晶格常数的变化不会引起谐振频率的变化,但是随着SHS单元数目或者样品 关键词： 开口空心球(SHS) 声学超材料 吸收峰 等效弹性模量     

Temperature-controlled tunable acoustic metamaterial with active band gap and negative bulk modulus

The local resonant band gap and the negative bulk modulus of the acoustic metamaterial with Helmholtz resonators are strongly affected by the temperature of water. In this paper, the acoustic transmission line method (ATLM) is introduced to investigate the influences of the temperature of water on the local resonant band gap and the negative bulk modulus of the acoustic metamaterial. Results show that the relative variations of the local resonant band gap and the negative effective bulk modulus suffering from the change of the temperature of water are approximately equivalent and are up to about 11%. The reason is that the local resonant frequency is proportional to the sound speed of fluid which is strongly effects by the temperature of water. By achieving the unambiguous relationships between these unusual properties of the acoustic metamaterial and the temperature of water, we find that the temperature-controlled acoustic metamaterial with the active band gap and the active negative bulk modulus can be realized in theory. This idea opens a new avenue for the design of the tunable acoustic metamaterial that can modulate the acoustic wave propagation.     

Effective zero index in locally resonant acoustic material

Here in locally resonant acoustic material, it is shown that effective zero refractive index can be constructed by the resonant unit-cells with coherent degenerate monopole–dipole momenta. Due to strong local resonances, the material layers with effective zero refractive index can function as a resonant cavity of high Q factor, where a subtle deviation from the resonant frequency may result in distinct increase of reflection. Full-wave simulations are performed to demonstrate some unusual wave transport properties such as invisibility cloaking, super-reflection, local field enhancement, and wavefronts rotation.     

基于小型化结构的各向同性负磁导率材料与左手材料

提出了一种双面环各向同性结构单元模型, 理论与实验研究了其微波电磁谐振行为. 结果表明: 在电磁波平行入射和垂直入射条件下, 该结构可在同一频段实现磁谐振, 且在谐振频段磁导率为负; 当电磁波以不同角度斜入射时, 其产生负磁导率频段也保持不变, 即该结构的电磁特性不依赖于入射角度, 双面环结构具有各向同性的特点. 将双面环结构与金属线结构组合, 该组合结构具有负折射率. 另外,双面环结构还具有小型化的优点, 在不增加结构单元几何尺寸的情况下, 通过在结构单元中引入金属化过孔的方法, 增加结构单元的电长度, 可使谐振频率大幅度地向低频方向移动, 使其在低频工作时 仍保持小型化的优点. 在双面环结构中引入金属化过孔技术可使谐振单元的几何尺寸减小50%, 在微波器件、滤波器、天线等领域有广阔的应用前景.     

Material parameters of metamaterials (a Review)

A theory of the homogenization of a certain class of metamaterials is stated. These metamaterials are volume lattices of electric and magnetic dipoles that are resonant with frequencies that are considerably lower than that of the first Bragg resonance of the lattice. It was shown that, for plates of a metamaterial, which are described by bulk material parameters, transition layers play an important role, and the known Drude notion of transition layers is significantly revised. The paper also discusses a more widespread method of determining the material parameters of metamaterials based on the extraction of the refractive index and the characteristic impedance from the scattering matrix of the plate of the metamaterial. The physical meaning of the material parameters obtained in this way is clarified, and the concept of Bloch lattices related to it is discussed. It is shown that the bulk material parameters and the parameters of transition layers can also be extracted from components of the scattering matrix of plates.     

Large lateral shift in a multi-layer waveguide with indefinite media

We explore the basic properties of lateral shift in a multi-layer waveguide including isotropic metamaterial and indefinite media. Effective index method is used to calculate the refractive index of indefinite media and stationary-phase approach is applied to analysis the lateral shift of reflected light. The influences of thicknesses of isotropic metamaterial and indefinite media, off-diagonal parameters of indefinite media, the loss of metamaterial and the permeability of lateral shift on the lateral shift are discussed based on simulation results, which give us a guidance in designing multi-functional devices by use of the lateral shift in the proposed structure.     

Dual-band double-negative-index fishnet metamaterial at millimeter-waves

An effective negative refractive index (NRI) is demonstrated and experimentally verified for the first two propagation bands of a fishnet-like metamaterial at millimeter-wave frequencies. The dual-band NRI behavior is achieved by engineering the diffraction order (±1, ±1) associated with the internal mode supported between holey layers to correspond with the second propagation band. In addition to the experimental interferometric technique that accounts for the handedness of the propagation, numerical results are given to predict the dual-band effective NRI and to confirm dual-band negative refraction for a prism composed of the proposed metamaterial.     

色散负折射特异介质的1维光子晶体缺陷态

在1维光子晶体中引入色散负折射特异介质,分析了其介电常数和磁导率在微波区（1～10 GHz）与频率的关系。分别对以色散负折射介质为缺陷的正折射率介质光子晶体及以正折射率介质为缺陷的正负折射率介质光子晶体进行了数值仿真,得出了均匀平面电磁波在正入射和斜入射时的透射谱。结果表明:在介电常数和磁导率均为负值的不同禁带中,分别出现了单、双缺陷模。利用透射谱的这一特点,可实现单、双通道滤波。     

An improved fishnet three-dimensional metamaterial with multiband left-handed characteristics at terahertz frequencies

We present the design of a multiband left-handed three-dimensional (3D) metamaterial based on improved fishnet structure at terahertz frequencies. The design realizes a three-dimensional material by mechanical stacking of multiple layers. The electromagnetic properties of the metamaterial have been investigated by numerical simulation. The results show that simultaneously negative values of permittivity, permeability and refractive index are found around the frequencies of 0.73, 0.85 and 1.12 THz for the electromagnetic wave normal incidence. The proposed metamaterial with independent polarization and compact effect offers a way to develop THz 3D materials and devices suitable for multifrequencies.     

A novel structure for a broadband left-handed metamaterial

A low absorptivity broadband negative refractive index metamaterial with a multi-gap split-ring and metallic cross (MSMC) structure is proposed and investigated numerically and experimentally in the microwave frequency range. The effective media parameters were retrieved from the numerical and experimental results, which clearly show that there exists a very wide frequency band where the permittivity and permeability are negative. The influence of the structure parameters on the magnetic response and the cut-off frequency of the negative permittivity are studied in detail. This metamaterial would have potential application in designing broadband microwave devices.     

Generation of radiation in tunnel-coupled waveguides with positive and negative refractive indices

The possibility of generating microwave radiation in tunnel-coupled planar waveguides, one of which is made of a metamaterial and is characterized by a negative refractive index in the corresponding frequency range, while the other waveguide is active and exhibits positive refractive index, is demonstrated. The model of a tunable distributed feedback laser, in which the dependence of the refractive index of the metamaterial on the external magnetic field allows controlling the oscillation frequency, is proposed.     

A novel structure for broadband left-handed metamaterial

A low absorptivity broadband negative refractive index metamaterial with multi-gap split-ring and metallic cross (MSMC) structure is proposed and investigated numerically and experimentally in the microwave frequency range. From the numerical and experimental results, the effective media parameters were retrieved, which clearly show that there exists a very wide frequency band where the permittivity and permeability are negative. The influence of the structure parameters on the magnetic response and the cut-off frequency of the negative permittivity are studied in detail. This metamaterial would have potential application in designing broadband microwave devices.