Spectrophotometric determination of germanium with Catechol Violet and cetyltrimethylammonium bromide

A ternary complex between germanium, Catechol Violet (CV) and cetyltrimethylanunoniuni bromide is proposed for the determination of germanium. The stoichiometric ratio Ge:CV is 1:2. Beer's law is obeyed from 0.1 to 1.0 ppm of Ge. The method is highly selective. Interference from Sn(IV), Fe(III), Bi(III), Cr(VI), Mo(VI), V(V) and Sb(III) in mg amounts is eliminated by extracting the germanium into carbon tetrachloride from 9M HC1 and then stripping into water before the photometric determination.     

Characterization and analytical application of the ion-association complex crystal violet-cadmium bromopyrogallol red

In the presence of polyvinylalcohol (PVA-124) and polyethylene glycol monooctylphenyl ether (emulsifier OP), cadmium ions(II) can form a colour ion-association complex with both Bromopyrogallol Red (BPR) and Crystal Violet (CV). In the NH(3)NH(4)Cl medium, the ion-association complex has a composition of Cd:BPR:CV = 1:1:2, and its corresponding molecular formula is [CV](2)[Cd(BPR)]. The maximum absorption of the colour complex is located at 654 nm with an apparent molar absorptivity of 1.79 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for cadmium over the range 0-10 mug/25 ml. A highly sensitive spectrophotometric method for trace cadmium in water and zinc was developed with good precision and accuracy. The mechanism of the reaction is also discussed.     

Extraction-spectrophotometric determination of iron(II) by ternary complex formation with pyrocatechol violet and cetyltrimethylammonium bromide

A method for iron(II) determination based on reaction with Pyrocatechol Violet to form a 1:2 binary complex at pH 5-7 is described and has been extended to an extraction-spectrophotometric procedure for the determination of iron(II) by formation of the 1:2:2 iron(II)-Pyrocatechol Violet-cetyltrimethylammonium bromide ternary complex. The molar absorptivities of the binary and ternary complexes at 595 and 605 nm are 6.55 x 10(4) and 1.35 x 10(5)1.mole(-1).cm(-1), respectively. The method has been successfully applied to the determination of iron in felspar, Portland cement and sodium hydroxide.     

Solvent extraction and spectrophotometric determination of palladium(II) with 7-iodo-8-hydroxyquinoline-5-sulphonic acid

An extractive spectrophotometric procedure has been developed for the determination of palladium (II) at microgram levels. The palladium(II) chelate of 7-iodo-8-hydroxyquinoline-5-sulphonic acid is extracted into n-butanol. Extraction is maximal (95%) from 0.2M perchloric acid. Beer's law is valid at 430 nm over a wide range of palladium concentration from 2.5 ppm. The molar absorptivity is 958 1.mole(-1).mm(-1). The system can tolerate a large excess of Co(II), Ni(II), Rh(III), Pt(IV), Cr(III), W(VI), chloride, phosphate, citrate and tartrate. Small quantities of Ru(III), IR(III) and EDTA do not interfere, but serious interference is caused by Fe(III), V(V), Mo(VI) and Os(VIII).     

Extractive-spectrophotometric determination of molybdenum with 4-unsubstituted-5-pyrazolones

A fairly sensitive and selective method for rapid determination of tracer amounts of molybdenum(V) as mixed-ligand complexes with thiocyanate and 4-unsubstituted-5-pyrazolones is described. The red complexes are extractable into chloroform from 1-5M hydrochloric or perchloric acid or 1-3M sulphuric arid media. The molar absorptivities are in the range 1.72-2.15 x 10(4)l.mole(-1).cm(-1) at 455 nm (lambda(max)). The method has been applied to the estimation of molybdenum in various synthetic and alloy-steel samples. In presence of excess of the reagent, Cu(II), Co(II), Mn(II), Fe(II), Fe(III), Al(III), Cr(III), Cr(VI), Ti(III), Ti(IV), Zr(IV), Hf(IV), V(III), V(IV), V(V), Nb(V), Ta(V), W(VI) and U(VI) do not interfere.     

Spectrophotometric determination of chromium in waste water and soil

The reaction of Cr(VI) with o-nitrophenylfluorone (NPF) in presence of cetyltrimethyl-ammonium bromide (CTMAB) to form a purplish red complex at pH 4.7-6.6 by heating at 50 degrees for 10 min has been investigated. The composition of the complex is 1:2:2 [Cr(VI):NPF:CTMAB], the wavelength of maximum absorbance is 582 nm. The molar absorptivity is 1.11 x 10(5)1.mole(-1).cm(-1). Beer's law is obeyed up to 0.2 microg ml Cr(VI) concentration. The interference of several ions, including Cu(2+), Fe(3+) and Al(3+), is eliminated by addition of a masking mixture containing KF, DCTA and tartrate. A new sensitive method for determination of chromium in waste water and soil is presented.     

High-performance liquid chromatography of micelle-solubilized complexes-IV Reversed-phase ion-pair chromatography of metal-3,5-diBr-PADAP-Triton X-100 complexes

The micellar solubilization complex systems of V(V), Cu(II), Zr(IV), Pd(II), Fe(III), Ni(II) and Co(II) with 3,5-diBr-PADAP and Triton X-100 have been investigated by HPLC on an ODS (5 x 250 mm) column with a ternary eluent of methanol-acetone-acetone-water containing TBA(+) and acetate buffer (pH 3.0) at 600 or 572 nm wavelength for the detection of the complexes. An HPLC-spectrophotometric method for determination of seven metal ions has been developed. The peak height calibration curves are linear up to 50-100 mu/1, metal ion concentration. The relative standard deviations for the determination of 30.0 mu/1 metal ion were 0.9-1.6% and the detection limits (S/N = 3) were 1.1-3.6 mug/1.     

A new sensitive method for the spectrophotometric determination of molybdenum using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one

A spectrophotometric method has been developed for the determination of Molybdenum (VI) using 3-hydroxy-2-(2'-thienyl)-4H-chromen-4-one as a complexing agent. The complex formed was dissolved in water in the presence of Triton X-100 and exhibits an absorption maximum at 410 nm. A large number of metal ions like Co(II), Ni(II), Mn(II), Cr(III), Zn(II), Cu(II), Hg(II), Bi(III), Fe(II), Fe(III), Zr(IV), V(V) can be tolerated at an appreciable concentrations. Molar absorptivity and Sandell's sensitivity of the method is 2.80 x 10(5) l mol-1cm-1 and 3.42 x 10(-4) micrograms cm-2, respectively. Beer's law is obeyed in the concentration range of 0.01-0.4 ppm Mo(VI). Aliquots containing 0.2 ppm of Mo(VI) give a mean absorbance of 0.56 with a relative standard deviation of 1.3%.     

Synergic extraction and spectrophotometric determination of titanium(IV)

A method has been developed for the synergic extraction and spectrophotometric determination of Ti(IV) with N-hydroxy-NN'-diphenylbenzamidine and thiocyanate. The yellow ternary complex, extracted into chloroform from dilute sulphuric acid medium (pH = 1.5+/-0.1), has maximum absorbance at 390 nm (molar absorptivity 1.3 x 1O(4) 1.mole(-1). cm(-1)). The method is free from interference from a large number of foreign ions and is recommended for the determination of titanium in steel.     

Micelle mediated extraction of titanium and its ultra-trace determination in silicate rocks

A highly sensitive method for extractive spectrophotometric determination of titanium in silicate rocks is described. Titanium in the range 0-10 microg as TiO2 is extracted into benzene or toluene by the formation of a ternary complex of the metal with thiocyanate (SCN-) and cetyltrimethylammonium bromide (CTA) in the ratio 1:2:2. A deep yellowish-orange ternary complex thus formed is suitable for the determination of titanium at wavelength 421 nm. The optimum colour intensity of this ternary complex was attained when the complex was extracted from an aqueous solution having concentrations of thiocyanate and HCl, in the range, 1.5-2.5 and 1-5 mol L(-1), respectively. The molar absorptivity and Sandell's sensitivity of the extracted species were found to be 1.1-1.0x10(5) L mol(-1) cm(-1) and 0.47 ng cm(-2) (referred to titanium), respectively, at lambda(max) of 421 nm. Except Fe3+, Nb5+ and V5+, no interference was encountered in the estimation of titanium. While up to 10 mg L(-1) Nb and V did not interfere in the determination of titanium, the interference of Fe(3+) was eliminated by reducing it to Fe2+ using SnCl2 solution. The method is highly sensitive and selective. The results obtained for titanium estimation in a host of silicate rock samples have been found to be highly reproducible, accurate and favourably comparable with certified values of reference materials and those obtained from standard methods.     

Tropoloae as a specific reagent for the determination of vanadium(V)

The blue colour developed on interaction of vanadium(V) with tropolone m 5.5-7.0N acid can be extracted into chloroform. The complex has an absorption maximum at 590 nm. Colour development is instantaneous and the extracted species is stable for 72 hr. Beer's law is followed in the range 1.02-14.25 ppm of vanadium. The molar absorptivity is 4.63 x 10(3)l.mole(-1).cm(-1). Most anions do not interfere. Of the 37 cations examined, only Ti(III), Ru(III), Pt(IV), Ir(IV), Mn(II), Ta(V) and Ce(III) were found to interfere. The interference due to these cations has been removed by masking them with EDTA.     

Spectrophotometric determination of molybdenum with 7,8-dihydroxy-4-methylcoumarin and cetyltrimethylammonium bromide

The 1:2 complexes formed between molybdenum and 7,8-dihydroxy-4-methylcoumarin in the presence and absence of cetyltrimethylammonium bromide (CTAB) have been studied. The binary complex formed at pH 5.6-6.0 in the absence of CTAB exhibits an absortion maximum at 360 nm with a molar absorptivity of 5.1 x 10(4) 1.mole(-1).cm(-1). The complex formed at pH 4.8-6.0 in the presence of CTAB has a molar absorptivity of 1.32 x 10(5) 1.mole(-1).cm (-1) at 400 nm, the wavelength of maximum absorption. Optimum conditions for complex formation were investigated and a rapid, sensitive and relatively selective method for the determination of up to approximately 70% of Mo in diverse alloys and steels is described. Small amounts of zirconium and tungsten interfere.     

Fluorimetric determination of aluminium in serum

A convenient fluorimetric method for the routine determination of aluminium in serum has been developed using lumogallion [4-chloro-3-(2,4-dihydroxyphenylazo)-2-hydroxybenzene-1-sulphonic acid]. Losses of aluminium during deproteinisation of the serum were prevented by treatment with a combination of 20 or 30% m/V trichloroacetic acid (TCA) and 5% m/VTCA. Iron(III) was removed by extraction into chloroform with capriquat (methyltrioctylammonium chloride) as an Fe3+-lumogallion-capriquat ternary complex. The interference from Cu2+ was eliminated by using thiosulphate as a masking agent. The detection limit was 3.6 ng ml-1 and the calibration graph was linear up to 1.4 micrograms ml-1 of aluminium. Using the proposed method, the average concentration of aluminium in the serum of healthy subjects was found to be 6.8 ng ml-1, in agreement with values reported in the literature.     

Investigation of the spectral properties of a squarylium near-infrared dye and its complexation with Fe(III) and Co(II) ions.

The spectral features of the squarylium dye NN525 in different solutions and its complexation with several metal ions were investigated. The absorbance maximum of the dye is at 669 nm in tetrahydrofuran. This value matches the output of a commercially available laser diode (650 nm), thus making use of such a source practical for excitation. The emission maximum of the dye in tetrahydrofuran is at 676 nm. The addition of either Fe(III) ion or Co(II) ion resulted in fluorescence quenching of the dye. The detection limit is 6.24 x 10(-8) M for Fe(III) ion and 1.55 x 10(-8) M for Co(II) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant Ks of the metal-dye complex was calculated to be 3.14 x 10(6) M(-1) for the Fe-dye complex and 2.64 x 10(5) M(-1) for the Co-dye complex.     

Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

Kinetochromic spectrophotometry-III Determination of fluoride by catalysis of the zirconimn-Methylthymol blue reaction

The determination of 0.5-4.75 mug of fluoride ion by its catalytic action upon the slow reaction between Methylthymol Blue and zirconium(IV) in aqueous solution is described. Calibration curves obtained after 60 min under optimal conditions are smooth, and yield an effective molar absorptivity of 3.23 x 10(4) 1.mole(-1)mm(-1) at 586 nm. There is considerably less cationic interference than in the alizarin complexan-cerium(III) or lanthanum procedure, but more serious anionic interference is encountered when phosphate, arsenate and, to a lesser extent, sulphate ions are present in the sample solution.     

Spectrophotometric study of the formation of ternary complexes of iron(III) with some triphenylmethane dyes and cationic surfactants

The optimum conditions have been found for the formation of the ternary complexes of iron(III) with Chrome Azurol S (CAS), Eriochrome Cyanine R, and Pyrocatechol Violet in the presence of cetyltrimethylammonium (CTA), cetylpyridinium, or tetradecyldimethyl-benzylammonium ions. The pH range of the complex formation is limited mainly by the pertinent hydrolysis constants of the metal ions. The maximum absorbances were obtained for excess R and cationic surfactants, ensuring the formation of complexes with the highest R:Fe molar ratio. The method based on the Fe-CAS-CTA system (ε = 1.32 × 10⁵ liter mol⁻¹ cm⁻¹ at 628 nm) is most sensitive and is recommended for the spectrophotometric determination of iron.     

Extraction-spectrophotometric determination of aluminium in river water with pyrocatechol violet and a quaternary ammonium salt

The simple removal of excess of co-extracted reagent in the solvent extraction of anionic metal complexes with a quaternary ammonium salt greatly improves the determination of aluminium with Pyrocatechol Violet (PV) and zephiramine (tetradecyldimethylbenzylammonium chloride). The exchange equilibrium constants for PV reagent and aluminium complex with four univalent anions (halides and nitrate) were determined when chloroform and 1,2-dichloroethane were used as extracting solvents. The constants were compared with those obtained with Pyrogallol Red. The method with PV and chloroform is suitable for the determination of micro-amounts of aluminium in river water. The apparent molar absorptivity of the aluminium complex in chloroform is 8.9 x 10(4) 1 mol(-1) cm(-1) at 587 nm. The limit of detection and precision achieved with the method are 3 mug l(-1) and within 4% respectively. A large excess of reagent can be used, and the ternary complex can be completely extracted over the pH range 5.5-10. Masking agents allow most interferences to be suppressed.     

Speciation of V, Cr and Fe by capillary electrophoresis-bandpass reaction cell inductively coupled plasma mass spectrometry

Capillary electrophoresis-dynamic reaction cell inductively coupled plasma mass spectrometry (CE-DRC-ICP-MS) for the speciation of iron(III/II), vanadium(V/IV) and chromium(VI/III) is described. Two different CE migration modes were employed for separating the six metal ions using pre-capillary complexation. One is counter-electroosmotic mode in which iron(III/II) and vanadium(V/IV) ions were well separated using a 60 cm x 75 microm i.d. fused silica capillary. The voltage was set at +22 kV and a 15 mmol l(-1) tris(hydroxymethyl)aminomethane (Tris) buffer (pH 8.75) containing 0.5 mmol l(-1) ethylenediaminetetraacetic acid (EDTA) and 0.5 mmol l(-1) ortho-phenanthroline (phen) was used as the electrophoretic buffer. The other is co-electroosmotic mode in which chromium(VI/III) ions were well separated while the applied voltage was set at -22 kV and a 10 mmol l(-1) ammonium citrate buffer (pH 7.7) containing 0.5 mmol l(-1) diethylenetriaminepentaacetic acid (DTPA) and 0.01% polybrene was used as the electrophoretic buffer. The mass spectra were measured at m/z 51, 52 and 56 for V. Cr and Fe, respectively. The interfering polyatomic ions of 35Cl16O+, 40Ar12C+ and 40Ar16O+ on 51V+, 52Cr+ and 56Fe+ determination were reduced in intensity significantly by using NH3 as the reaction cell gas in the DRC. The detection limits were in the range of 0.1-0.5, 0.4-1.3 and 1.2-1.7 ng ml(-1) for V, Cr and Fe, respectively. Applications of the method for the speciation of V, Cr and Fe in wastewater were demonstrated. The recoveries were in the range of 92-120% for various species.     

Spectrophotometric investigation of the reaction of eriochrome cyanin RC and magnesium and aluminium

The reaction of magnesium or aluminium ions with Eriochrome Cyanin RC in alkaline medium leads to formation of a complex of type ML. The molar absorptivities of the complexes are 1.90 +/- 0.14 x 10(3)1. mole(-1).cm(-1) at 570 nm for the magnesium complex and 3.87 +/- 0.04 x 10(4) at 555 nm for the aluminium complex. The conditional stability constants of the complexes were determined at various pH values, and hence the overall formation constants, which were found to be log beta(111) = 8.65 +/- 0.06 for MgOHL, log beta(121) = 22.29 +/- 0.05 for AlH(2)L, log beta(111) = 18.25 +/- 0.14 for AlHL, and log beta(101) = 13.66 +/- 0.01 for AlL.