Absorptiometric determination of palladium with 2,3-quinoxalinedithiol

A method is described for the absorptiometric determination of palladium, in the range 0.1-2.5 ppm, with 2,3-quinoxalinedithiol (H(2)qdt) in aqueous ethanol. The reagent, S-2-(3-mercaptoquinoxalinyl) thiuronium chloride (mgt), is hydrotysed rapidly to (qdt)(2-) at pH 10. In the presence of zinc, (qdt)(2-) is stabilized by complex formation and reagent blanks are reduced almost to zero. An anionic 1:2 complex of palladium(II) and (qdt)(-2) is formed at pH 10, having maximum absorbance at 454 nm and Sandell sensitivity index of 0.0032 mug cm (2). The reaction is moderately selective; equivalent concentrations of platinum(IV), iridiuin(IV) and rhodium(III) can be tolerated but gold(III), copper(II) and a few other metals interfere. Suggestions are made for masking interferences. The method is characterized by good precision, with a relative standard deviation of 0.25% at the 1-ppm level.     

Determination of xanthates as Cu(II) complexes by high-performance liquid chromatography – Inductively coupled plasma tandem mass spectrometry

The present study provides a novel, selective analysis method for the determination of low xanthate concentrations. The rising concern over the environmental effects of xanthates demands the development of analysis methods which this study answers. Complex formation in aqueous solution between xanthates and an excess of Co(II), Ni(II), Pb(II), Cd(II), Cu(II), and Zn(II) ions was utilized to selectively determine xanthates by high-performance liquid chromatography–inductively coupled plasma tandem mass spectrometry for the first time. The complexes that were formed were extracted to ethyl acetate using liquid–liquid extraction and separated by high-performance liquid chromatography technique before the quantitative determination of metal ions and sulfur in the xanthate complexes. Good separation and high measurement sensitivity were achieved using Cu(II) as the complex metal ion. The analysis method was optimized for the determination of sodium isopropyl xanthate and sodium isobutyl xanthate with detection limits of 24.7 and 13.3 μg/L, respectively. With a linear calibration range of 0.1–15 mg/L and a total analysis time of 4–5 min, the present method is a fast and sensitive option for selective xanthate determination.     

Extraction titrimetric determination of copper

Lead xanthate undergoes a quantitative, stoichiometric and fast exchange reaction with copper(II), even near the equivalence point, making it a suitable reagent for an extraction titration of copper. Many other metal ions do not participate in exchange reactions with lead xanthate. making this method selective for copper.     

Spectrophotometric study of the copper(II)-2,2′-dipyridyl-2-pyridylhydrazone complex formation

The reaction of copper(II) ions with 2,2′-dipyridyl-2-pyridylhydrazone (DPPH) has been studied. Two copper complexes were found to be formed. One at pH 6.5 to 8.5 and the other at pH 11.9 to 12.6 with molecular extinction coefficients of 1.9 × 10⁴M^?1 · cm^?1 at the absorption maximum of 478 nm and 3.8 × 10⁴M^?1 · cm^?1 at 448 nm, respectively. A sensitive spectrophotometric procedure for the determination of copper at less than a 1-ppm level is proposed.     

Determination of gold,palladium and copper by flame atomic absorption spectrometry after preconcentration on silica gel modified with 3-(2-aminoethylamino)propyl group

A preconcentration method of gold, palladium and copper based on the sorption of Au (III), Pd (II) and Cu (II) ions on a column packed with 3-(2-aminoethylamino)propyl bonded silica gel is described. The modified silica gel was synthesized and characterized by FT-IR and C, H, N elemental analysis. At column preconcentration, the effects of parameters such as pH, volume, flow rate, matrix constituents of solutions and type of eluent on preconcentration of gold, palladium and copper were studied. The recoveries of Au (III), Pd (II) and Cu (II) were 98.93±0.51, 98.81±0.36 and 99.21±0.42 % at 95 % confidence level, respectively. The detection limits (δ) of the elements were 0.032, 0.016 and 0.012 μg ml⁻¹, respectively. The preconcentration method was applied for determination of gold and palladium in certified reference material SARM 7B and copper in river and synthetic seawater by FAAS. Gold, palladium and copper were determined with relative error lower than 10 %.     

The use of 1-[pyridyl-(2)-azo]-naphthol-(2) in the presence of TX-100 and N,N'-diphenylbenzamidine for the spectrophotometric determination of copper in real samples

A simple and sensitive field detection and spectrophotometric method for determination of copper described herewith is based on the formation of a red coloured species of copper(II) with 1-[pyridyl-(2)-azo]-naphthol-(2) (PAN), TX-100 and N,N'-diphenylbenzamidine (DPBA) at pH range 7.8-9.4. The red coloured Cu(II)-PAN-(TX-100)-DPBA complex in chloroform shows maximum absorbance at 520 nm with molar absorptivity value of 1.14x10(5) l mol(-1) cm(-1). The detection limit of the method is 2 ng ml(-1) organic phase. The system obeys Beer's law up to 0.6 mug Cu(II) ml(-1) in organic solution. Most of the common metal ions generally found associated with copper do not interfere. The repeatability of the method was checked by finding relative standard deviation (RSD) (n=10) value for solutions each containing 0.2 mug ml(-1) of Cu(II) and the RSD value of the method was found to be 1.5%. The validity of the method has been satisfactorily examined for the determination of copper in soil and airborne dust particulate samples.     

Atomic absorption spectrophotometric determination of trace copper in waters, aluminium foil and tea samples after preconcentration with 1-nitroso-2-naphthol-3,6-disulfonic acid on Ambersorb 572

An atomic absorption spectrophotometric method for the determination of trace copper after adsorption of its 1-nitroso-2-naphthol-3,6-disulfonic acid chelate on Ambersorb 572 has been developed. This chelate is adsorbed on the adsorbent in the pH range 1–8. The copper chelate is eluted with 5 ml of 0.1 mol l⁻¹ potassium cyanide and determined by flame atomic absorption spectrometry (FAAS). The selectivity of the proposed procedure was also evaluated. Results show that iron(III), zinc(II), manganese(II) and cobalt(II) at the 50 μg l⁻¹ level and sodium(I), potassium(I), magnesium(II), calcium(II) and aluminium(III) at the 1000 μg l⁻¹ level did not interfere. A high enrichment factor, 200, was obtained. The detection limit (3σ) of copper was 0.34 μg l⁻¹. The precision of the method, evaluated by seven replicate analyses of solutions containing 5 μg of copper was satisfactory and the relative standard deviation was 1.7%. The adsorption of copper onto Ambersorb 572 can formally be described by a Langmuir equation with a maximum adsorption capacity of 14.3 mg g⁻¹ and a binding constant of 0.00444 l mg⁻¹. The accuracy of the method is confirmed by analysing tomatoes leaves (NIST 1573a) and lead base alloy (NBS 53e). The results demonstrated good agreement with the certified values. This procedure was applied to the determination of copper in waters (tap, river and thermal waters), aluminium foil and tea samples.     

Spectrophotometric Methods for the Simultaneous Determination of Metals in University Laboratories

Spectrophotometry is an analytical technique that is studied at the university level because of its ease of operation and low expense. Three different experimental methods of gradual difficulty are proposed for the application of this technique to the simultaneous determination of two metals. The techniques are applicable to the practice of all subdisciplines of experimental chemistry. These techniques are (1) absorption spectrophotometry, the determination of cobalt (II) and copper (II); (2) first-derivative spectrophotometry, the determination of chromium (III) and copper (II); and (3) first-derivative spectrophotometry using the zero-crossing method, the determination of copper (II) and mercury (II).     

Photometric determination of copper with N-(dithiocarboxy)sarcosine after preconcentration with amberlite xad-2 resin

The copper(II) chelate of N-(dithiocarboxy)sarcosine (DTCS) is sorbed on a column of Amberlite XAD-2 resin from a pH-7 phosphate solution (0.1M) and stripped with a pH-9.0 ammonia solution (0.2M) in 60% methanol. The absorbance of the eluted chelate is measured at 432 nm against water. Sodium nitrilotriacetate, sodium tripolyphosphate, and EDTA can be used to mask interfering metal ions other than mercury(II), the resulting complexes not being sorbed on the resin. The mercury(II) chelate of DTCS is also sorbed on and stripped from the column along with the copper chelate, but does not interfere in the photometric determination of copper, because it is colourless. The recovery of copper(II) is quantitative from test solutions (50–500 ml) of any salinity up to that of sea-water. Concentration factors of up to about 20 are obtained. The method is highly selective for copper and can be applied to its determination in sea-water.     

Complexometric determination of copper and iron in silicon with a cupric ion-selective electrode

A method is described for the complexometric determination of copper(II) and iron(III) in silicon with the cupric ion-selective electrode as endpoint detector. The sample is dissolved with hydrogen fluoride, hydrogen peroxide, and gold(III) as catalyst. The silicon matrix is then removed distilling off the azeotropic mixture containing hydrofluorosilicic acid. The residue is dissolved with 0.5 M sulfuric acid and the resulting solution divided into two parts. Copper is determined over the first by TETREN at pH 5.0–6.0. The copper-iron sum is determined over the second part, by EDTA at pH 1.0–1.5. The effect of Al(III), Mn(II), and Zn(II) ions is investigated. Applications of the method of the determination of copper and iron in silicon samples from different manufacturers, is illustrated. Copper at level of 10 ppm was analyzed with a relative standard deviation of 6%. Iron at level of 5000 ppm was analyzed with a relative standard deviation of about 2.5%.     

A simple spectrophotometric method for the determination of copper in industrial, environmental, biological and soil samples using 2,5-dimercapto-1,3,4-thiadiazole.

A simple spectrophotometric method is presented for the rapid determination of copper at a trace level using 2,5-dimercapto-1,3,4-thiadiazole (DMTD) as a new spectrophotometric reagent. The method is based on the reaction of non-absorbent DMTD in a slightly acidic (0.002-0.014 mol dm(-3) sulfuric acid) aqueous solution with copper(II) to produce a highly absorbent greenish-yellow chelate product that has an absorption maximum at 390 nm. The reaction is instantaneous and the absorbance remains stable for 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 5.65 x 10(4) dm3 mol(-1) cm(-1) and 10 ng cm(-2) of CuII, respectively. Linear calibration graphs were obtained for 0.1-20 microg cm(-3) of CuII; the stoichiometric composition of the chelate is 1:2 (Cu:DMTD). A large excess of over 50 cations, anions and complexing agents (e.g. tartrate, oxalate, citrate, phosphate, thiourea, SCN-) do not interfere in the determination. The method was successfully used for the determination of copper in several Standard Reference Materials as well as in some environmental water samples, biological samples, soil samples and solutions containing both copper(I) and copper(II) and complex synthetic mixtures. The method has high precision and accuracy (s = +/-0.01 for 0.5 microg cm(-1)).     

Complexation of aminoglycoside antibiotics with metal cations as a derivatization reaction: Determination of gentamicin by equilibrium electrochemical and spectrophotometric methods

The complexation of aminoglycoside antibiotics with metal cations was proposed as a derivatization method for the further determination of the complex obtained by potentiometry with ion-selective electrodes (ISE), voltammetry at the interface between two immiscible electrolyte solutions (ITIES), and spectrophotometry. It was shown by the spectrophotometric method that gentamicin formed a 1: 1 complex with copper(II). For the potentiometric determination of gentamicin, we obtained ionophores that were ion associates formed by the gentamicin complex of copper(II) and tetraphenylborate derivatives as counterions. The transfer of the gentamicin complex of copper(II) was studied voltammetrically at the ITIES. The results obtained indicate that l antibiotic gentamicin can be directly determined as a complex with copper(II) by potentiometric, voltammetric, and spectrophotometric methods.     

Determination of copper(II) based on its catalytic effect on thiosemicarbazide-H(2)O(2)-CTMAB chemiluminescence reaction

A novel chemiluminescence (CL) reaction, thiosemicarbazide (TSC)–H₂O₂, for the determination of copper at nanogram per milliliter level in batch type is described. The method is based on the catalytic effect of copper(II) on the oxidation of TSC with hydrogen peroxide to produce light emission. The emitted light was observed by using a conventional fluorescence detector. In the optimum conditions, calibration graph was linear in the range of 0.1–1.3 ppm. The limit of detection was 10 ppb. The relative standard deviation for five determinations of 0.5 ppm copper(II) was 1.93%. The proposed method permitted the selective and sensitive determination of Cu(II) in human hair and wheat flour with sufficient precision. The possible mechanism for the new chemiluminescence reaction was also discussed.     

Spectrophotometric determination of a nanomolar amount of ascorbic acid using its catalytic effect on copper(II) porphyrin formation

A simple, fast and sensitive flow-injection method is proposed for the determination of nanomolar amounts of ascorbic acid in tea, urine and blood. The procedure is based on the accelerating effect of a nanomolar level of ascorbic acid on the reaction of cooper(II) with 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin, H(2)tmpyp(4+). Ascorbic acid reduces Cu(II) to Cu(I) which catalyzes the incorporation of Cu(II) into H(2)tmpyp(4+) to form Cu(II)(tmpyp)(4+). In this method two solutions, one containing ascorbic acid and H(2)tmpyp(4+) and the other containing copper(II) and acetate buffer (pH 5.0), were injected into two flowing streams of water through two sample injectors of 120 mu1 sample volume. The mixture was allowed to react in a 2 m reaction coil and the colored solution of Cu(II)(tmpyp)(4+) was monitored at 550 nm (epsilon = 2.01 x 10(4)M(-1)cm(-1)). The present method was applied to the determination of ascorbic acid in tea, urea and blood. Reducing agents such as sugars and vitamins B(1), B(2), B(6) and B(12) did not give serious errors at a concentration of 10(-6) M for the determination of 1.0 x 10(-8)M ascrobic acid. The relative standard deviation of the present method was 2.8% for the determination of 1.0 x 10(-8)M ascorbic acid. The reaction mechanism was clarified from the kinetic results of the formation of Cu(II)(tmpyp)(4+) in the presence of various concentrations of ascorbic acid, copper(II) and hydrogen ion.     

Use of silica gel chemically modified with zirconium phosphate for preconcentration and determination of lead and copper by flame atomic absorption spectrometry

An analytical method using silica gel chemically modified with zirconium (IV) phosphate for preconcentration of lead and copper, in a column system, and their sequential determination by flame atomic absorption spectrometry (FAAS), was developed. Sample solutions are passed through a glass column packed with 100 mg of the sorbent material, at pH 4.5, and lead and copper are eluted with 1.0 mol l⁻¹ HNO₃ at a flow rate of 2.0 ml min⁻¹. The extraction of copper is affected by Fe(II), Mn(II), Zn(II), Ni(II) and Co(II) while only Fe(II) interferes in the lead determination. These interferences may be overcome with an appropriate addition of a KI or NaF solution. An enrichment factor of 30 was obtained for both metals. While the limits of detection (3σ) were 6.1 and 1.1 μg l⁻¹, for Pb and Cu, respectively, the limits of determination were 16.7 and 3.3 μg l⁻¹. The precision expressed as relative standard deviation (R.S.D.) obtained for 3.3 μg l⁻¹ of Cu and 16.7 μg l⁻¹ of Pb were 4.3 and 4.7%, respectively, calculated from ten measurements. The proposed method was evaluated with reference material and was applied for the determination of lead and copper in industrial and river waters.     

Spectrophotometric determination of copper(II) at low mug l(-1) levels using cation-exchange microcolumn in flow-injection

A simple spectrophotometric flow-injection method is reported for the highly sensitive and fast determination of copper(II). The method is based on the formation of coloured Cu(II)-(4-methylpiperidinedithiocarbamate)(2) complex when the copper solutions are introduced into a tertiary reagent stream containing 4-methylpiperidinedithiocarbamate. The coloured complex is then selectively monitored at 435 nm. To increase interactions between copper(II) and colour forming reagent and preconcentrate of copper(II), a microcolumn containing strong cation exchange resins was placed between injection manifold and spectrophotometer. The system required no mixing chamber and allowed a sample throughput >60 sample h(-1). The calibration graph was linear in the range 5-100 mug l(-1). The detection limit was <0.5 mug l(-1) for 20 mul injection volume of copper(II) ion solution. The developed method was applied to environmental, copper processing water, and ore samples.     

Spectrophotometric determination of cobalt, nickel, palladium, copper, ruthenium and molybdenum after extraction of their isoamyl xanthate complexes into molten naphthalene

A method has been developed for the spectrophotometric determination of microamounts of Co(II), Ni(II), Cu(II), Pd(II), Ru(III) and Mo(VI) after extraction of their isoamyl xanthate complexes into molten naphthalene. The method has been applied to the determination of these metal ions in various alloys and in environmental samples (fly ash).     

Determination of sulphur functions with N-iodosuccinimide

Titrimetric determination of thioureas, thiols, xanthates and dithiocarbamates with N-iodosuccinimide (NIS) is described. The method for xanthate can be applied to carbon disulphide (converted into xanthate with potassium ethoxide). Acidic and non-aqueous solutions of the oxidizing agent are stable. The procedures are rapid and accurate to 0.1% with a precision of 0.2%. Hydrogen sulphide and thiocarbonyl compounds interfere. The behaviour of N-bromosuccinimide and NIS with thiols in aqueous medium is compared. It is shown that iodine is the oxidizing species in both cases. The limitations of iodine as a reagent for thiol determination are discussed. Cysteine, which cannot be determined with iodine, can be determined with NIS. The role of methanol in non-aqueous determination of thiols is discussed. Methanol accelerates the oxidation, which is otherwise slow in acetonitrile medium.     

Field method for the estimation of uranium in natural waters

Summary A method, applicable in the field, for the quantitative determination of uranium at the 1-ppm level in natural water has been developed. Equipment and reagents have been assembled and listed for convenience. While 1-ppm solutions have been analyzed lower concentrations can probably be evaluated in the same way.

---

Zusammenfassung Eine Feldmethode zur Bestimmung von etwa 1 ppm Uran in natürlichen Wässern wurde entwickelt. Die dazu nötigen Geräte und Reagenzien wurden angegeben. Wahrscheinlich können auch noch geringere Konzentrationen in gleicher Weise bestimmt werden.

     

Rapid and sensitive determination of urinary 2,5-hexanedione by reversed-phase high-performance liquid chromatography.

A rapid and sensitive method for the determination of 2,5-hexanedione (HD) (the principal metabolite of n-hexane) in urine samples by reversed-phase high-performance liquid chromatography (HPLC) is described. The sample preparation procedure was based on solid-liquid extraction after acid hydrolysis; it was optimized to enable accurate HD determination in less than 30 min. Analysis of spiked real samples showed a recovery of more than 85% at the 0.1-ppm level, with a relative standard deviation of 5% and a detection limit as low as 0.01 ppm. Intra-assay and inter-assay coefficients of variation at the 0.5-ppm level were 4 and 5%, respectively. The chromatographic peak assigned to HD was identified by collecting the HPLC eluate at the retention time of HD and analysing it using Fourier transform infrared spectrometry coupled with high-resolution gas chromatography. Urine samples of unexposed and exposed subjects were analysed following the proposed analytical procedure. HPLC and high-resolution gas chromatographic analyses were also compared on these samples. A correlation factor of 0.992 was obtained, which showed a good agreement between the two sets of data.