聚醚聚氨酯-聚醚聚酰亚胺合金相结构的研究

通过不同分子量的对－氨基苯甲酸酯封端的聚（四次亚甲基）醚和均苯甲甲酸二酐反应,合成了聚醚聚酰胺酸;然后以不同重量比将聚醚聚氨酯和聚醚聚酰胺酸溶液混合反应亚胺化,制备了一系列不同硬段含量的聚醚聚氨酯－聚醚聚酰亚胺合金。用傅立叶变换红外光谱、动态力学分析、示差扫描量热、广角Ｘ－衍射、应力应变试验等分析测试方法对合金进行了研究,结果表明聚醚聚氨酯－聚醚聚酰亚胺合金具有很好的相分离结构,是一类新型耐高温、有韧性的热塑性弹性体。聚醚分子量相同的聚氨酯和聚酰亚胺形成的合金软段相容,合金具有两相结构;聚醚分子量不同的聚氨酯和聚酰亚胺形成的合金软段存在相分离,合金具有三相结构,表现在材料外观上分别为透明不透明的韧性膜,少量聚酰亚胺的掺入,能大大增加材料的耐热性能,而合金的材料力学性能没有明显变化。     

用DSC研究线形多嵌段聚氨酯与聚氯乙烯、氯化聚氯乙烯共混相容性

用示差扫描量热法（DSC）研究了线形多嵌段聚氨酯（PU）与聚氯乙烯（PVC）、氯化聚氯乙烯（CPVC）共混相容性，说明了PU／VC、PU／CPVC的相容是由于共混物中形成了新的氢键的缘故．聚酯型聚氨酯与PVC、CPVC的相容性要好子聚酸型聚氨酯，CPVC与PU的相容性又要好于PVC．聚氨酯中硬段的引入不利于PU／PVC、PU／CPVC的相容性．     

Dynamic mechanical thermal analysis of polyamide 6/thermoplastic polyurethane blends

Blends obtained from polyamide 6 and polyester or polyether polyurethanes were investigated by means of DMTA. The blends were prepared by compounding in a twin-screw Brabender —Plasticorder. Changes in composition did not influence the glass temperature of the amorphous fraction of the polyamide, but also no distinct transition for separated polyurethane soft segment was visible. Therefore the blends seem to be multiphase systems, where the elastomeric polyurethane phase is dispersed in a continuous polyamide phase. From changes in the β relaxation region of the polyamide better miscibility of polyester polyurethanes comparing to polyether polyurethanes was explained by hydrogen bonding in the common amorphous phase.     

Extraction of aromatic acids and phenols by polyurethane foam

The extraction of several aromatic acids and phenols including salicylic acid, 8-hydroxyquinoline, 1-amino-2-naphthol-4-sulphonic acid and cinnamic acid in the presence of various protonated alkylamines, ammonia and alkali metal cations from aqueous solution by polyurethane foam has been investigated. These compounds are extracted only in the neutral form by a solvent extraction mechanism. The mechanism has been confirmed by the salting-out effect and pH studies. With the exception of 8-hydroxyquinoline, the compounds are more extractable by polyether foam than by polyester foam, suggesting that hydrogen bonding is stronger with the polyether foam.     

Extraction of aromatic organic compounds by polyurethane foam

The mechanism of extraction of organic compounds by open-cell polyurethane foam has been investigated through a detailed study with simple aromatic compounds. Comparison with identical extractions into diethyl ether suggests that the basic extraction mechanism is an ether-like solvent extraction process. The addition of salt increases the extraction and changing the dielectric constant of the aqueous solution also affects the extraction. For organic compounds which have a group capable of hydrogen bonding, some additional factor appears to influence the extraction. This appears to be hydrogen bonding with the polyurethane foam; it is stronger with polyether foam and reduced by the presence of a strong intramolecular hydrogen-bonding group placed ortho to the hydrogen-bonding group. Thermodynamic studies support these conclusions.     

Synthesis and characterization of a flame retardant hyperbranched polyether

<正>A brominated hyperbranched polyether has been synthesized from cyanuric chloride and sodium salt of tetrabromobisphenol-A by an A_2+B_3 approach.The synthesized polyether was characterized by ~1H-NMR,~(13)C-NMR,UV, FTIR spectroscopy and X-ray diffraction studies,measurements of solution viscosity,molecular weight and solubility and elemental and thermogravimetric analyses.The flame retardancy of the synthesized polyether and its blends with commercially available plasticized poly(vinyl chloride)(PVC) and low density polyethylene(LDPE) was investigated by measurements of limiting oxygen index(LOI) value and thermogravimetric analysis.The properties are compared with a non-halogenated similar type of bisphenol-A based aromatic polyether after blending at different dose levels with the same base polymers.The LOI values of these blends indicated that these hyperbranched polyethers acted as flame retardant additives,and antimony trioxide had prominent synergistic effect with the bromo hyperbranched polyether for the above base polymers,and an increment of 4 to 6 units in LOI values was observed.     

Synthesis of a New Polysiloxane Modified Polyurethane

It is well known that the polysiloxane polymers possess important physical and chemical properties, such as very good resistance to temperature and oxidant agents, very low glass-transition temperature, high permeability to gases and biocompatibility. But…     

聚醚硅油表面迁移行为对聚苯乙烯表面极性的影响

利用变角衰减全反射傅立叶变换红外光谱(ATR-FTIR)法和接触角,分析了聚醚硅油在聚苯乙烯共混物薄膜表面的选择性富集行为及对其表面结构和表面极性的影响,认为接触介质的表面性质是影响共混物中各组分产生选择性迁移扩散的重要影响因素.强极性介质的诱导作用可以在共混物表面层中产生剧烈变化的浓度梯度,而弱极性介质所产生的表面浓度梯度比较缓和.     

氨基改性聚醚硅油的合成、结构表征及应用

在Pt催化剂的作用下，利用含氢硅油与烯丙基缩水甘油醚、烯丙基聚氧乙烯聚氧丙烯醚的硅氢化加成反应合成聚醚／环氧硅油中间体，然后分别用吗啉、乙二胺、N,N-二甲基丙二胺、N-氨乙基哌嗪等氨解开环，制得了一系列氨烃基改性聚醚硅油AMPES，对其进行了结构表征和应用。结果表明：增加含氢硅油的数均分子量，提高硅含量，可改善AMPES的柔软性，而对织物的吸湿性影响不大。     

GAS PERMEATION OF SEGMENTED POLYURETHANES AND THEIR BLENDS WITH PVC

Film specimens of four segmented polyurethanes with different soft segments, namely polycaprolactone, polytetramethylene adipate, polytetramethylene oxide and polypropylene oxide, and their blends with PVC of different compositions were obtained by solution cast. The permeability of these films to O_2, N_2 and H_2 and their density were measured by using gas chromatography and technique of density gradient column. The polyether polyurethanes were found to have higher permeability than the polyester ones due to their low glass transition temperature and /or the low density value. The blends of PVC and polyether polyurethanes, especially the PPO-based polyurethane, are incompatible, and their permeability coefficient-composition dependence has the typical S-shaped curves. PVC is well compatible with the soft segments in its blends with polyester polyurethanes. For these blends the composition dependence of permeability is characterized by a negative deviation from the semilogarithmic additivity rule, and it is possible to prepare blends having T_g 20℃lower than that of PVC, but retaining its low permeability almost unchanged, results were discussed in according with the different approaches for the permeation behavior of compatible and incompatible blends.     

聚苯乙烯-g-聚乙二醇的制备及其表面改性作用

通过沉淀聚合方法,利用自由基共聚制备了苯乙烯-顺丁烯二酸酐共聚物(SMA),利用SOCl2的酰氯反应,在SMA大分子链上接枝聚乙二醇侧链,制备了聚苯乙烯-g-聚乙二醇(PEG-g-PS)的大分子表面改性剂。利用大分子表面改性剂在聚苯乙烯基体中具有选择性迁移扩散的特性,实现了对聚苯乙烯薄膜表面极性的改善作用。采用衰减全反射傅立叶变换红外光谱仪和表面静态接触角法检测了聚苯乙烯的表面极性。结果发现,PEG-g-PS上的聚醚链段可以有效的富集在聚合物表面,明显改善PS的表面极性和亲水性,表面极性可提高3倍,达到11.6mN/m。同时,大分子表面改性剂和聚苯乙烯基体间有一定的相容性,有效地克服了小分子表面改性剂容易流失,改性寿命较短的重要缺陷,使表面改性的持久性充分增加,实现对聚合物表面改性效果终生化的目的。而且大分子表面改性剂在极性溶剂的诱导作用下,可以实现进一步的迁移扩散,充分提高了聚苯乙烯的表面极性。     

Absorption profiles of flames used in atomic-absorption spectroscopy

A study has been made of the distributions of metallic atoms in their ground electronic state when an aqueous or an organic solvent containing the metal present in the solution in various combined forms is sprayed into various flames used in atomic-absorption spectroscopy. It has been found that with almost all elements studied, rich flames give greater peak absorbances than lean flames, and the flame stoichiometry determines the number of free atoms in a flame. It has also been observed that the spatial distribution of free atoms in a flame depends not only on the flame stoichiometry but also on the species which the desired metal forms in the solution and the flame, on the other anions, complexing agents, and cations present in the solution, on chemical and physical properties of the solvent, on the type of atomizer-burner and on the flame temperature.     

氨基改性聚醚型聚硅氧烷的制备及其柔软性能研究

用含氢硅油、烯丙基缩水甘油醚、烯基聚醚的硅氢化加成产物-聚醚/环氧硅油与胺反应制得了氨基改性聚醚型聚硅氧烷（APEPS）,对其结构与性能进行了表征和研究。结果表明,含氢硅油分子量、有机胺结构、氨基改性聚醚型聚硅氧烷的硅含量对APEPS性能有影响。提高硅含量、增加氨值,可改善APEPS的柔软性与滑爽感,但对织物的吸湿性影响不大。     

PU/纳米SiO2溶胶杂化材料的前端聚合研究

前端聚合(FP)是通过在单体前端区域引发增长聚合将单体合成为聚合物的一种不同于传统的反应模式．它是一种通过局部反应区域在聚合物单体中的移动而将聚合物单体转变为聚合物的一种反应模式,主要运用在放热反应中,在反应初始阶段进行短时间的加热,然后停止加热,借助放热反应的热自催化完成单体的聚合。根据反应机理的不同,     

毛竹屑与玉米淀粉共液化产物制备聚氨酯泡沫研究

采用单因素试验设计,研究了液化剂组成、液比以及毛竹屑与淀粉的比例对液化产物理化性质、及所制备的聚氨酯泡沫材料的物理力学指标影响.结果显示当以50%乙二醇+50%碳酸亚乙酯混合物作为液化剂、添加相当于液化剂质量3%的浓硫酸为催化剂、在(150±5)℃(油浴)和常压条件下,液化150min,搅拌速度30r/min,取得本试验条件下最好的竹屑液化效果,液化产物中竹屑含量25%,残渣率3.96%,但该液化产物中天然聚合物碎片含量少,所制备的聚氨酯泡沫材料塌陷;竹屑与玉米淀粉共液化有效提高了液化产物中生物质的含量,但占液化剂质量25%竹屑+占液化剂质量125%玉米淀粉共液化产物粘度太高(8.85Pa.s);而20%竹屑+130%玉米淀粉的共液化产物与4,4′-二苯基甲烷二异氰酸酯以及各种助剂按异氰酸酯基/羟基摩尔比为1.1配合时,所制备的聚氨酯泡沫材料表观密度为33.6kg/m3、压缩强度118kPa、弹性模量6.91MPa,在周年生物降解试验中,该生物质基聚氨酯硬质泡沫失重率为12.63%.     

The effect of the type of solvent on the structural and dynamic parameters of polyurethane-styrene-co-acrylonitrile blends

The effect of solvents, such as THF, methyl ethyl ketone, ethyl acetate, and acetone, on the structures and molecular dynamics of polyurethane-styrene-co-acrylonitrile blends has been investigated with the use of spin-probe ESR spectroscopy, DSC, IR spectroscopy. There are slight changes in the values of molecular mobility, crystallinity, and elastic modulus of composites containing more than 50% polyurethane, and only at higher contents of the styrene-acrylonitrile copolymer are sharp changes in the structural and dynamic parameters observed in the presence of any solvent. In different solvents, the blend parameters improve in the following series: THF, methyl ethyl ketone, ethyl acetate, acetone. This outcome is determined by the thermodynamic affinities of the dissolved polymers for the solvent. It has been shown that the content of hydrogen bonds between nitrile and urethane groups (a band at 3344 cm^?1) increases with the content of styrene-co-acrylonitrile in a blend. During reversible deformation, the molecular mobility of the radical increases and further tension is accompanied by reduced mobility in the oriented blends, independently of the solvent type.     

Microencapsulation of ammonium polyphosphate with hydroxyl silicone oil and its flame retardance in thermoplastic polyurethane

Microencapsulated ammonium polyphosphate (MAPP) is prepared using hydroxyl silicone oil by in situ polymerization and characterized by XPS. Microencapsulation gives MAPP better water resistance and flame retardance compared with APP in thermoplastic polyurethane (TPU). Thermal stability and fire resistance behavior have been analyzed and compared. The LOI value of the TPU/MAPP composite is higher than that of the TPU/APP composite. The UL 94 rating of the TPU/MAPP composite is V-0 at the 20 wt% additive level, whereas TPU/APP gives V-2 rating at the same loading level. The water resistant properties of the TPU composites are studied. Results of the cone calorimeter and microscale combustion calorimeter experiment show that MAPP is an effective flame retardant in TPU compared with APP.     

硅橡胶复合材料阻燃研究进展

将功能填料引进到硅橡胶及其复合材料中可以获得特定功能的硅橡胶复合材料,已经成为近些年研究热点。目前阻燃剂种类繁多,但是性能比较单一,这已经不能满足人们的需要。人们在关注硅橡胶复合材料阻燃性能的同时,也考虑与其它性能兼备以及成本等问题。因此,本文综述了铂化合物、磷系阻燃剂、阻燃涂层、阻燃填料和微胶囊化阻燃剂等阻燃体系下硅橡胶复合材料的阻燃研究现状,总结了不同阻燃剂的阻燃机理,并且给出了其今后的改进方法,最后对硅橡胶复合材料阻燃研究的发展做了展望。     

Novel elastomeric polyurethane fibers modified with polypropylene microfibers

Extrusion of immiscible polymer biphasic blends to form in situ microfibers of the minor component in the matrix of the major component is an elegant way to create composites with new properties. The process was used to obtain thermoplastic polyurethane elastomers modified with polypropylene microfibers. The effect of phase interaction on blend morphology and properties was studied by running a series of blends with and without a maleated polypropylene compatibilizer. Six different blends were prepared: three with compatibilizer and three without the compatibilizer. All blends contained polypropylene as a minor component (80/20; 90/10 and 95/5). Extrusion spinning of polyurethane/polypropylene blends with and without compatibilizer resulted in polyurethane fibers modified with highly-oriented polypropylene microfibrils at all component ratios. Increasing polypropylene concentration in the thermoplastic polyurethane matrix increased hardness and modulus, but did not affect tensile strength and lowered elastic recovery.     

Characterization of a mini membrane inlet mass spectrometer for on-site detection of contaminants in both aqueous and liquid organic samples

A mini membrane inlet mass spectrometer (mini-MIMS) of a total weight of 12 kg was constructed using a miniature Multipole mass spectrometer, a small vacuum system and a flexible flat sheet membrane inlet, where the exposed membrane area can be changed by a factor of 80. The variable membrane area together with the possibility of operating the Multipole at pressures up to 1 x 10(-3) Torr made it possible to test the system with three microporous membranes (cellulose, polyether sulfone and polypropylene) normally not compatible with standard electron ionization MIMS systems and a standard non-porous polydimethylsiloxane membrane. We found that the hydrophilic cellulose and polyether sulfone membranes had selectivity characteristics opposite to those of the standard silicone membrane. They demonstrated preferential detection of hydrophilic compounds in hydrophobic organic solvents, whereas the silicone membrane preferentially detects hydrophobic organic compounds in aqueous solution. Using the cellulose membrane, organic contaminants and water could be detected in organic solvents at 10-100 ppm levels by weight, the relative high detection limits primarily caused by interference from a high chemical background from the solvent. When being used with the standard silicone membrane the mini-MIMS behaved just like most standard MIMS systems with detection limits of volatile organic compounds in water at concentrations just below 1 ppm. The hydrophobic microporous polypropylene membrane was not found to be useful with the mini-MIMS.