Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

Selective detection of bismuth(III) and iron(II) ions with certain new reagents

Isoperthiocyanic acid (3-amino-5-thione-1,2,4-dithiazole) (I), tetraethylthiuram monosulphide ("Tetmosol") (II), eosin (III), and mercurochrome (IV) are used as new qualitative reagents for bismuth, III and IV are also used for detection of iron(II). A conc. sulphuric acid solution of I, or an acctone solution of II, when treated with bismuth in presence of potassium iodide, gives a deep red or reddish-orange precipitate, characteristic of bismuth. Bismuth in presence of III or IV gives a heavy and characteristically bright deeppink precipitate on addition of ammonia. With I, 1 mug of bismuth may be detected with a dilution limit of 1:50,000. Sb(III) and As(III) do not interfere in any of these tests. Iodides interfere only when I and II are used as reagents. Pb, Cu(II). and Fe(III) interfere with III and IV. I and II are also proposed as reagents for iodide; nitrites would interfere. III and IV, with iron(II) on addition of ammonia, produce a precipitate with highly intense green fluorescence. No other common cation [including Fe(III)] or anion interferes. The limit of detection is 3 mug ml .     

First example of mu(3)-sulfido bridged mixed-valent triruthenium complex triangle Ru(III)(2)Ru(II)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-S) (1) incorporating simultaneous O,O- and gamma-C-bonded bridging acetylacetonate units. Synthesis,crystal structure,and spectral and redox properties

The reaction of mononuclear ruthenium precursor [Ru(II)(acac)(2)(CH(3)CN)(2)] (acac = acetylacetonate) with the thiouracil ligand (2-thiouracil, H(2)L(1) or 6-methyl -2-thiouracil, H(2)L(2)) in the presence of NEt(3) as base in ethanol solvent afforded a trinuclear triangular complex Ru(3)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-sulfido) (1). In 1, each ruthenium center is linked to one usual O,O-bonded terminal acetylacetonate molecule whereas the other three acetylacetonate units act as bridging functions: each bridges two adjacent ruthenium ions through the terminal O,O-donor centers at one end and via the gamma-carbon center at the other end. Moreover, there is a mu(3)-sulfido bridging in the center of the complex unit, which essentially resulted via the selective cleavage of the carbon-sulfur bond of the thiouracil ligand. In diamagnetic complex 1, the ruthenium ions are in mixed valent Ru(III)Ru(III)Ru(II) state, where the paramagnetic ruthenium(III) ions are antiferromagnetically coupled. The single crystal X-ray structure of 1 showed two crystallographically independent C(3)-symmetric molecules, Ru(3)(O,O-acetylacetonate)(3)(mu-O,O,gamma-C-acetylacetonate)(3)(mu(3)-S) (1), in the asymmetric unit. Bond distances of both crystallographically independent molecules are almost identical, but there are some significant differences in bond angles (up to 6 degrees ) and interplanar angles (up to 8 degrees ). Each ruthenium atom exhibits a distorted octahedral environment formed by four oxygen atoms, two from each of the terminal and bridging acetylacetonate units, one gamma-carbon of an adjacent acetylacetonate ligand, and the sulfur atom in the center of the complex. In agreement with the expected 3-fold symmetry of the complex molecule, the (1)H and (13)C NMR spectra of 1 in CDCl(3) displayed signals corresponding to two types of ligand units. In dichloromethane solvent, 1 exhibited three metal center based successive quasireversible redox processes, Ru(III)Ru(III)Ru(III)-Ru(III)Ru(III)Ru(II) (couple I, 0.43 V vs SCE); Ru(III)Ru(III)Ru(IV)-Ru(III)Ru(III)Ru(III) (couple II, 1.12 V); and Ru(III)Ru(III)Ru(II)-Ru(III)Ru(II)Ru(II) (couple III, -1.21 V). However, in acetonitrile solvent, in addition to the three described couples [(couple I), 0.34 V; (couple II), 1.0 V; (couple III), -1.0], one irreversible oxidative response (Ru(III)Ru(III)Ru(IV) --> Ru(III)Ru(IV)Ru(IV) or oxidation of the coordinated sulfide center) appeared at E(pa), 1.50 V. The large differences in potentials between the successive couples are indicative of strong coupling between the ruthenium ions in the mixed-valent states. Compound 1 exhibited a moderately strong charge-transfer (CT) transition at 654 nm and multiple ligand based intense transitions in the UV region. In the Ru(III)Ru(III)Ru(III) (1(+)) state, the CT band was slightly blue shifted to 644 nm; however, the CT band was further blue shifted to 520 nm on two-electron oxidation to the Ru(III)Ru(III)Ru(IV) (1(2+)) state with a reduction in intensity.     

Development of liquid-liquid extraction and separation method for ruthenium(III) with 2-octylaminopyridine from succinate media: Analysis of catalysts

Ruthenium(III) has been efficiently extracted from 0.05 M sodium succinate at pH 9.5 by 2-octylaminopyridine in xylene and stripped with aqueous 10% (w/v) thiourea solution and determined spectrophotometrically. Various parameters viz., pH, weak acid concentration, reagent concentration, stripping agents, contact time, loading capacity, aq.: org. volume ratio, solvent has been thoroughly investigated for quantitative extraction of ruthenium(III). The utility of method was analyzed by separating the ruthenium(III) from binary mixture along with the base metals like Cu(II), Ag(I), Fe(II), Co(II), Bi(III), Zn(II), Ni(II), Se(IV), Te(IV), Al(III) and Hg(II) as well as platinum group metals (PGMs). Ruthenium(III) was also separated from ternary mixtures like Os(VIII), Pd(II); Pd(II), Pt(IV); Pd(II), Au(III); Pd(II), Cu(II); Fe(II), Cu(II); Ni(II), Cu(II); Co(II), Ni(II); Se(IV), Te(IV); Rh(III), Pd(II); Fe(III), Os(VIII). The stoichiometry 1: 2: 1 (metal: succinate: extractant) of the proposed complex was determined by slope analysis method by plotting graph of logD _[Ru(III)] versus logC _[2-OAP] and logD _[Ru(III)] versus logC _[succinate]. The interference of various cations and anions has been studied in detail and the statistical evaluations of the experimental results are reported. The method was successfully applied for the analysis of ruthenium in various catalysts, synthetic mixtures corresponding to the composition of alloys and minerals.     

Use of tetracyanoplatinate (ii) for the luminescent detection of metalions

The tetracyanoplatinate(II) (TCP) ion forms insoluble fluorescent compounds with many metal ions. This property has not hitherto been exploited for analytical use. The soluble sodium TCP salt has been applied as a reagent for metal ion detection. Fluorescent precipitates useful for detection of the metal ions were obtained with Y(III), Zr(IV), Ag(I), Zn(II), Cd(II), Hg(I), Hg(II), A1(III), Pb(II), La(III) and Th(IV). Limits of detection ranged from 5 to 200 ppm. With ammonium acetate as a masking agent, selective detection of 10 ppm of silver was achieved in the presence of the other metal ions. As little as 20 ppm of zirconium can be detected in the presence of hafnium, which yields a non-fluorescent precipitate.     

Adsorptive stripping voltammetric measurements of trace amounts of platinum(II) and ruthenium(III) in the presence of 1-(2-pyridylazo)-2-naphthol

An extremely sensitive stripping voltammetric procedure for low level measurements of platinum (II, IV) or ruthenium (III, IV) is reported. The method is based on the interfacial accumulation of the platinum (II) or ruthenium (III)-1-(2-pyridylazo)-2-naphthol complex on the surface of a hanging mercury drop electrode, followed by the reduction of the adsorbed complex during the cathodic scan. The peak potential was found to be –0.8 V vs. Ag/AgCl electrode and the reduction current of the adsorbed complex ions of platinum (II) or ruthenium (III) was measured by differential pulse cathodic stripping voltammetry. The optimum experimental conditions were: 1.5×10^–7 mol/l of 1-(2-pyridylazo)-2-naphthol solution of pH 9.3, preconcentration potential of –0.2 V, accumulation time of 3 min and pulse amplitude of 50 mV with 4 mV s^–1 scan rate in the presence of ethanol-water (30% v/v) — sodium sulphate (0.5 mol/l). Linear response up to 6.4 × 10^–8 and 5.1 × 10^–8 mol/l and a relative standard deviation (at 1.2×10^–8 mol/l) of 2.4 and 1.6% (n=5) for platinum (II) and ruthenium (III) respectively were obtained. The detection limits of platinum and ruthenium were 3.2×10^–10 and 4.1×10^–10 mol/l, respectively. The electronic spectra of the Pt(II) — PAN and Ru(III) — PAN complexes were measured at pH 9.3 and the stoichiometric ratios of the complexes formed were obtained by the molar ratio method. The effects of some interfering ions on the proposed procedure were critically investigated. The method was found suitable for the sub-microdetermination of ruthenium (IV) and platinum (IV) after their reduction to ruthenium (III) and platinum (II) with sulphur dioxide in acid media. The applicability of the method for the analysis of binary mixtures of ruthenium (III) and (IV) or platinum (II) and (IV) has also been carried out successfully. The method is simple, rapid, precise, and promising for the determination of the tested metal ions at micro-molar concentration level.     

Spectrophotometric determination of osmium(IV), iridium(IV) and platinum(iv) and separation and determination of palladium(II) and ruthenium(III) in the presence of other platinum metals, with oximidobenzotetronic acid as reagent

Oximidobenzotetronic acid is suggested as a reagent for the spectrophotometric determination of osmium(IV), iridium(III), iridium(IV), platinum(IV) and for separation and determination of palladium(II) and ruthenium(III) in the presence of other platinum metals. Iridium(III) and (IV) can be estimated when present together.     

Pyridine-2-aldoxime and 6-methylpyridine-2-aldoxime as gravimetric reagents for estimation of palladium(II) and uranium(VI)

Pyridine-2-aldoiumc (I) has been found to be a sensitive reagent for the gravimetric determination of palladium(II). From chloride medium, precipitation is complete at pH 3.0-11.0, and in solution containing 1NHNO(3) to pH6.0. The compositions of the precipitates (dried at 130 degrees ) correspond to PdL(2), and PdL(2). HNO(3) (HL representing the reagent) respectively. Pd(II) can be estimated gravimetncally in presence of acetate, oxalate, tartrate, phosphate, fluoride borate, perchlorate, Cu(II), Cd, Co(II), Fe(II), Ni, Zn, Pb, Bi, Sb(III), Pt(IV), Ir(IV), Ru(III), Rh(III); Os(IV) in quantities more than twice that of Pd(II), and Ag(I), Au(III) and Fe(II) even m traces cause serious interference. The yellow uranium(VI) complex with (I) is precipitated quantitatively over the pH range 3.5-10.5 and, after washing and drying corresponds to the composition (c(6)h(5)n(2)o)(2)uo(2), The uranium(VI) complex with 6-methylpyridine-2-aldoxime (II) is precipitated quantitatively over the pH range 3.0-10.5, and after washing and drying at 120-130 degrees corresponds to UO(2),(C(7),H(7),N(2)O)(2). Both (I) and (II) are suitable for the estimation of 1-50 mg of uranium(VI) in the presence of up to 10-fold quantities ofTh(IV), La(III) and Ce(III) even when present together. Ce(IV) in quantities more than three times that of U must be reduced to Ce(III). Tartrate, citrate, phosphate, Ti(IV) and Zr interfere, but acetate, oxalate, and borate do not.     

Study on the Interactions of Ruthenium(III), Rhodium(III) and Palladium(II) Ions with DNA

Fluorescence, absorption and circular dichroism spectra have been used in the interactions of ruthenium(III), rhodium(III) and palladium(II) ions with DNA with berberine as a probe (berberine, Scheme 1). The results are as follows: ruthenium(III) and rhodium(III) ions show different effects from that of the palladium(II) ion on the fluorescence spectra characteristics of berberine-DNA system. Quenching fluorescence is seen with palladium(II) ion addition, whereas increasing fluorescence is observed for ruthenium(III) and rhodium(III) ions. The addition of ruthenium(III), rhodium(III) and palladium(II) ions causes the increasing absorption of the DNA solution. The addition of ruthenium(III), rhodium(III) and palladium(II) ions to the DNA solution also causes the circular dichroism spectra to change. The above results suggest that different metal ions exhibit different affinity when binding to DNA, which could correlate well with the ions’ charge, structure and the ability to coordinate. There is a comparison between Pt(IV) and Pd(II) ions on the fluorescence of the berberine-DNA system.     

Electron transfer. 144. Reductions with germanium(II)

Solutions 0.2-0.4 M in Ge(II) and 6 M in HCl, generated by reaction of Ge(IV) with H3PO2, are stable for more than 3 weeks and can be diluted 200-fold with dilute HCl to give GeCl3- preparations to be used in redox studies. Kinetic profiles for the reduction of Fe(III) by Ge(II), as catalyzed by Cu(II), implicate the odd-electron intermediate, Ge(III), which is formed from Cu(II) and Ge(II) (k = 30 M-1 s-1 in 0.5 M HCl at 24 degrees C) and which is consumed by reaction with Fe(III) (k = 6 x 10(2) M-1 s-1). A slower direct reaction between Ge(II) and Fe(III) (k = 0.66 M-1 s-1) can be detected in 1.0 M HCl. The reaction of Ge(II) with I3- in 0.01-0.50 M iodide is zero order in oxidant and appears to proceed via a rate-determining heterolysis of a Ge(II)-OH2 species (k = 0.045 s-1) which is subject to H(+)-catalysis. Reductions of IrCl6(2-) and PtCl6(2-) by Ge(II) are strongly Cl(-)-catalyzed. The Ir(IV) reaction proceeds through a pair of 1e- changes, of which the initial conversion to Ge(III) is rate-determining, whereas the Pt(IV) oxidant probably utilizes (at least in part) an inner-sphere PtIV-Cl-GeII bridge in which chlorine is transferred (as Cl+) from oxidant to reductant. The 2e- reagent, Ge(II), like its 5s2 counterpart, In(I), can partake in 1e- transactions, but requires more severe constraints: the coreagent must be more powerfully oxidizing and the reaction medium more halide-rich.     

Quantitative separation of gallium from zinc, copper, indium, iron(III) and other elements by cation-exchange chromatography in hydrobromic acid-acetone medium

Gallium can be separated from Zn, Cu(II), In, Cd, Pb(II), Bi(III), Au(III), Pt(IV), Pd(II), Tl(III), Sn(IV) and Fe(III) by elution of these elements with 0.50M hydrobromic acid in 80% acetone medium, from a column of AG50W-X4 cation-exchange resin. Gallium is retained and can be eluted with 3M hydrochloric acid. Separations are sharp and quantitative except for iron(III) which shows extensive tailing. With 0.20M hydrobromic acid in 80% acetone as eluting agent, all the species above except iron(III) and copper(II) can be separated from gallium with very large separation factors. Only a 1-g resin column and small elution volumes are required to separate trace amounts and up to 0.5 mmole of gallium from more than 1 g of zinc or the other elements. Hg(II), Rh(III), Ir(IV), Se(IV), Ge(IV), As(III) and Sb(III) have not been investigated, but should be separated together with zinc according to their known distribution coefficients. Relevant elution curves, results for the analysis of synthetic mixtures and for amounts of some elements remaining in the gallium fraction are presented.     

Hydrothermal single-crystal growth in the systems Ag/Hg/X/O (X = VV, AsV): crystal structures of (Ag3Hg)VO4, (Ag2Hg2)3(VO4)4, and (Ag2Hg2)2(HgO2)(AsO4)2 with the unusual tetrahedral cluster cations (Ag3Hg)3+ and (Ag2Hg2)4+ and crystal structure of AgHgVO4

Single crystals of (Ag3Hg)VO4 (I), (Ag2Hg2)3(VO4)4 (II), AgHgVO4 (III), and (Ag2Hg2)2(HgO2)(AsO4)2 (IV) were grown under hydrothermal conditions (250 degrees C, 5 d) from starting mixtures of elementary mercury, silver nitrate, ammonium vanadate, and disodium hydrogenarsenate, respectively. All crystal structures were determined from X-ray diffraction data, and their chemical compositions were confirmed by electron microprobe analysis. I crystallizes in the tillmannsite structure, whereas II-IV adopt new structure types: (I) I4, Z = 2, a = 7.7095(2) A, c = 4.6714(2) A, 730 structure factors, 24 parameters, R[F2 > 2sigma(F2)] = 0.0365; (II) I42d, Z = 4, a = 12.6295(13) A, c = 12.566(3) A, 1524 structure factors, 55 parameters, R[F2 > 2sigma(F2)] = 0.0508; (III) C2, Z = 4, a = 9.9407(18) A, b = 5.5730(8) A, c = 7.1210(19) A, beta = 94.561(10) degrees , 1129 structure factors, 48 parameters, R[F2 > 2sigma(F2)] = 0.0358; (IV) P31c, Z = 2, a = 6.0261(9) A, c = 21.577(4) A, 1362 structure factors, 52 parameters, R[F2 > 2sigma(F2)] = 0.0477. The most striking structural features of I, II, and IV are the formation of tetrahedral cluster cations (Ag3Hg)3+ and (Ag2Hg2)4+, respectively, built of statistically distributed Ag and Hg atoms with a metal-metal distance of about 2.72 A. The electronic structure of these clusters can formally be considered as two-electron-four-center bonding. The crystal structure of III differs from the protrusive structure types insofar as silver and mercury are located on distinct crystallographic sites without a notable metal-metal interaction >3.55 A. All crystal structures are completed by tetrahedral oxo anions XO4(3-) (X = VV, AsV) and for IV additionally by a mercurate group, HgO2(2-).     

Reductions by titanium(II) as catalyzed by titanium(IV)

The cobalt(III) complexes, [(NH3)5CoBr]2+ and [(NH3)5CoI]2+ are reduced by Ti(II) solutions containing Ti(IV), generating nearly linear (zero-order) profiles that become curved only during the last few percent of reaction. Other Co(III)-Ti(II) systems exhibit the usual exponential traces with rates proportional to [Co(III)]. Observed kinetics of the biphasic catalyzed Ti(II)-Co(III)Br and Ti(II)-Co(III)I reactions support the reaction sequence: [Ti(II)(H20)n]2+ + [Ti(IV)F5]- (k1)<==>(k -1) [Ti(II)(H2O)(n-1)]2+ + [(H2O)Ti(IV)F5]-, [Ti(II)(H2O)(n-1)]2+ + Co(III) (k2)--> Ti(III) + Co(II) with rates determined mainly by the slow Ti(IV)-Ti(II) ligand exchange (k1 = 9 x 10(-3) M(-1) s(-1) at 22 degrees C). Computer simulations of the catalyzed Ti(II)-Co(III) reaction in perchlorate-triflate media yield relative rates for reduction by the proposed active [Ti(II)(H2O)(n-1)]2+ intermediate; k(Br)/k(I) = 8.     

Spectrometric Studies on the Complexation of Pd(II), Fe(III) and Pt(IV) with mandelazo I

Abstract

A spectrometric study of the reaction between Pd(II), Fe(III) and Pt(IV) ions, and Mandelazo I was carried out. The optimum conditions favouring the formation of the complexes are extensively investigated. The stoichiometry of the complexes formed in solution (1:2, 1:1, 1:1), their apparent stability constants (5.45 × 10⁹, 2.39 × 10⁶, 4.12 × 10⁵) and the ranges for obedience to beer's law (0.2 – 6.4, 0.25 – 7.0, 1.5 – 42.0 μg/mL) are reported for Pd(II), Fe(III) and Pt(IV), respectively. The effect of some metal ions including Cu(II), Zn(II), Mn(II), Cd(II), Hg(II), Co(II), Ni(II), Be(II), Al(III), Th(IV) and U(VI), on the maximum absorbance of the formed complexes was also investigated.     

Electron transfer. 157. Reactions of hypervalent manganese species with S(2) metal-ion reductants

Solutions of the complexes of hypervalent manganese, [Mn(III)(C(2)O(4))(3)](3)(-) (in oxalate buffers), [Mn(IV)(bigH)(3)](4+) (in biguanide buffers), and [(bipy)(2)Mn(III)(O)(2)Mn(IV)(bipy)(2)](3+) (in bipyridyl buffers) may be reduced by s(2) center reductants In(I), Sn(II), and Ge(II), yielding Mn(II) quantitatively. In all cases, rates are determined by the initial act of electron transfer, giving an s(1) transient (In(II), Sn(III), or Ge(III)); subsequent steps are rapid and kinetically silent. The In(I)-Mn(III) and Ge(II)-Mn(III) reactions are inhibited by added oxalate, whereas the Sn(II)-(Mn(III)Mn(IV)) reaction is strongly accelerated by Cl(-). The In(I)-Mn(IV) reaction is complicated by formation of a 1:1 addition compound In(I).Mn(IV). We find no evidence for two-unit steps in any of these systems.     

Reaction of (bromodifluoromethyl)phenyldimethylsilane with organometallic reagents

A new fluorine-containing organosilicon compound, (bromodifluoromethyl)-phenyldimethylsilane (II), was synthesized by the N-bromosuccinimide (NBS) bromination of difluoromethyl)phenyldimethylsilane (I), which was prepared from phenyldimethylsilyllithium and chlorodifluoromethane. Compound II reacted with dimethyl sulfoxide to give dimethyl sulfide and phenyldimethylfluorosilane in quantitative yield. The reaction of II with nucleophiles, such as sodium ethoxide, Grignard or lithium reagents, afforded products arising from cleavage of the carbonsilicon bond. In contrast, the reaction of II with Grignard reagents in the presence of appropriate catalysts (Group VIII transition metal salts or complexes) afforded the homo-coupling product of II, 1,2-bis-(phenyldimethylsilyl)-1,1,2,2-tetrafluoroethane (IV), in excellent yield. The silver(I) salt-catalyzed reaction of II with ethylmagnesium bromide gave the cross-coupling product, (1,1-difluoropropyl)phenyldimethylsilane (V) as well as III and IV. When cuprous bromide was employed as catalyst, the reaction of II with ethylmagnesium bromide afforded 1-phenyldimethylsilyl-1-propene (VI) and 3-phenyldimethylsilyl-2-pentene (VII) as main products.     

Determination of mercury(II) ion by electrochemical cold vapor generation atomic absorption spectrometry.

A technique for determination of mercury is described; it is based on electrolytic reduction of Hg(II) ion on a graphite cathode, the trapping of mercury vapor and its volatilization into a quartz tube aligned in the optical path of an atomic absorption spectrometer. The electrochemical cell consisted of a graphite cathode and an anode operating with constant direct current for the production of mercury atoms. A pre-activated graphite rod was used as the cathode material. The optimum conditions for electrochemical generation of mercury cold vapor (the electrolysis time and current, the flow rate, the type of electrode and electrolyte) were investigated. The characteristic electrochemical data with chemical cold vapor using NaBH4-acid were compared. The presence of cadmium(II), arsenic(III), antimony(III), selenium(IV), bismuth(III), silver(I), lead(II), lithium(I), sodium(I) and potassium(I) showed interference effects which were eliminated by suitable separation techniques. The calibration curve is linear over the range of 5-90 ng ml(-1) mercury(II). The detection limit is 2 ng ml(-1) of Hg(II) and the RSD is 2.5% (n = 10) for 40 ng ml(-1). The accuracy and recovery of the method were investigated by analyzing spiked tap water and river water.     

Potentiometric redox determination of gold(III) and its application to alloys

The simple potentiometric method proposed for the indirect determination of 1–10 mg of gold(III) is based on reduction to the metal with excess of cobalt(II) in the presence of 1,10-phenanthroline or 2,2'-bipyridine at pH 3 and 50°C, and titration of the unused cobalt(II) complex with iron(III) chloride solution. Many metal ions can be tolerated; Ag(I) and Pd(II) are eliminated by precipitation with sodium chloride and 1,10-phenanthroline or 2,2'-bipyridine, respectively, but Hg(II), Fe(III) and Pt(IV) interfere. The method is applied to the determination of gold in alloys.     

Ion flotation behaviour of thirty-one metal ions in mixed hydrochloric/nitric acid solutions

The ion flotation of 31 metal ions in hydrochloric/nitric acid solution with the cationic surfactant cetylpyridinium chloride was investigated. A 25-ml portion of 0.27-2.87 x 10(-4)M metal ion and 1.8-6.0 x 10(-4)M cetylpyridinium chloride solution in 0.17-3.4M acid mixture ([HCl]:[HNO(3)] = 2.4:1) was subjected to flotation in a cell, 22.5 cm high and 4.0 cm in diameter, for 5 min, with nitrogen bubbles. Ir(IV), Pt(IV), Ge(IV), Sn(IV), Bi(III), Au(III), Tl(III), Pd(II) and Sn(II) were floated from solution in 95-100% yield; Ru(III), Rh(III), Ir(III), Hg(II), Ag(I) and Tl(I) were partly floated, while Cr(VI), Ti(IV), Zr(IV), Ga(III), In(III), Fe(III), Sb(III), Al(III), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), CD(II) and Pb(II) were floated with less than 20% yield. The flotation behaviour of these metal ions in the mixed acid system was compared with that in hydrochloric acid. The flotation is more efficient in the mixed acid system.     

Sorption behaviour of lanthanum(III), neodymium(III), terbium(III), thorium(IV) and uranium(VI) on Amberlite XAD-4 resin functionalized with bicine ligands

The complexing properties (capacity, pH effect, breakthrough curve) of a chelating resin, containing bicine ligands, were investigated for La(III), Nd(III), Tb(III), Th(IV) and U(VI). Trace amounts of these metal ions were quantitatively retained on the resin and recovered by eluting with 1 M hydrochloric acid. The capacity of the resin for La(III), Nd(III), Tb(III), Th(IV) and U(VI) was found to be 0.35, 0.40, 0.42, 0.25 and 0.38 mmol g(-1), respectively. Separation of U(VI) and Th(IV) from Ni(II), Zn(II), Co(II) and Cu(II) in a synthetic solution was carried out.