Differential catalytic determination of iridium(IV) and rhodium(III) based on the oxidation of N-methyldiphenylamine-4-sulfonic acid

The kinetics of the oxidation of N-methyldiphenylamine-4-sulfonic acid with periodate ions was studied in weakly acidic solutions in the presence of iridium(IV), rhodium(III), and their mixtures. Oxidation rate constants were determined in the presence of individual catalysts and their mixtures. The synergetic effect of iridium(IV) and rhodium(III) on the rate of the indicator reaction was estimated; the range of catalyst ratios for the simultaneous determination of analytes was determined. The effect of some factors (oxidant nature and concentration, temperature, the ionic strength of solution, and interfering ions) on the rate of the indicator reaction in the presence of iridium(IV) and rhodium(III) mixtures was assessed. A procedure for the differential catalytic determination of iridium(IV) and rhodium(III) was proposed and tested in the analysis of artificial mixtures and a platinum concentrate of complex composition (KP-5).     

Spectrofluorimetric determination of iridium(IV) traces using 4-pyridone derivatives

A new spectrofluorimetric determination of iridium(IV) with 3-hydroxy-2-methyl-1-phenyl-4-pyridone (HX) or 3-hydroxy-2-methyl-1-(4-tolyl)-4-pyridone (HY) is reported. Iridium(IV) react with HX or HY and chelates were extracted into chloroform or dichloromethane. The organic phase showed fluorescence. The fluorescence measurements to quantify iridium were carried out in its fluorescent band centred at λ_ex=373 nm and λ_em=480 nm. Under optimal conditions, the calibration graphs were linear over the concentration range of 0.1-7.6 μg ml⁻¹ of iridium for Ir(IV)-HX and 0.1-5.8 μg ml⁻¹ for Ir(IV)-HY with a correlation coefficients of 0.999 and 0.992 and relative standard deviation of ±1.1%.The method is free from interference by Rh(III) and Pt(IV), which normally interfere with other methods. Iridium can be determined in the presence of 300-fold excess of rhodium(III) and 10-fold excess of platinum(IV).The method was applied successfully to the determination of iridium in some synthetic mixtures and mineral sample gave satisfactory results.     

Reactivities of osmium(VIII), iridium(IV) and platinum(IV) towards glycolaldehyde

Oxidations of glycolaldehyde (GA) to glyoxal by osmium(VIII), iridium(IV) and platinum(IV) have been investigated in aqueous solution, and the orders with respect to each [reactant] determined. The reaction involving iridium(IV) takes place through intermediate formation of free radicals in a MeCO₂Na-MeCO₂H buffer medium, whereas a one-step two-electron transfer process occurs in the oxidations by Os^VIII and Pt^IV in an alkaline medium. Mechanisms consistent with the experimental findings are proposed. This revised version was published online in June 2006 with corrections to the Cover Date.     

A highly sensitive spectrophotometric determination of platinum(IV) using leuco xylene cyanol FF

A new, simple, highly sensitive and rapid spectrophotometric method has been described for the determination of platinum(IV). The method is based on the oxidation of leuco xylene cyanol FF (LXCFF) to its blue form of xylene cyanol FF by platinum(IV) in sulfuric acid medium (pH 1.0-2.5), the formed dye shows an absorption maximum at 620 nm in acetate buffer medium (pH 3.0-4.5). The method obeys Beer's law over a concentration range of 0.3 to 2.6 micro g mL(-1) platinum, having molar absorptivity and Sandell's sensitivity of 5.1x10(4) L mol(-)(1) cm(-1) and 0.0038 micro g cm(-2), respectively. The optimum reaction conditions and other analytical parameters have been evaluated. The developed method has been successfully applied to the determination of platinum in pharmaceutical preparations, soil, natural water, plant material, platinum-containing catalyst, and synthetic alloy samples.     

Ternary complexes in the spectrophotometric determination of trace amounts of platinum(IV)

A simple, rapid, reproducible, sensitive and selective method is proposed for the spectrophotometric determination of submicrogram amounts of platinum(IV) in aqueous media. The proposed method involves the formation of a ternary complex between the hexa-ammine-platinum(IV) cationic complex, and the counter-ion 2,4,5,7-tetrabromofluorescein ethyl ester. The reaction is instantaneous and the red ternary complex remains stable for ca. 1 hr. Beer's law is obeyed over the range 39-1170 ppM with molar absorptivity of ca. 8.0 x 10(4) at 555 nm and pH 10. A relative standard deviation of 1.1% was found for the reproducibility of the method. Even without the use of masking agents, no interference is encountered from other noble metals except rhodium(III). Of 13 other cations and 8 anions tested, only iron(III) interferes.     

Extraction of platinum with Astrafloxin FF from aqueous-organic solutions: Separative extraction-spectrophotometric determination of platinum(II) and platinum(IV) species

The optimum conditions of the extraction of the ion associates of platinum with the thiocyanate ions and the polymethine basic dye Astrafloxin FF by aromatic hydrocarbons and acetic acid esters from aqueous and aqueous-organic solutions were studied. The introduction of water-soluble donor-active solvents (hexamethylphosphoric triamide, N,N-diethylacetamide, N,N-dimethylformamide, and N,N-diethylformamide) leads to a considerable increase in the extraction of the ion associates of platinum and the simultaneous suppression of the extraction of the simple dye salt. The molar absorption coefficients of the extracts of ion associates are as high as (8.1?C13.3) × 10⁴. 84?C96% platinum is extracted in the form of ion associates by a single extraction. The conversion of platinum into ion associates makes it possible to separate platinum from many elements, including Cu, Cd, Ni, Co, Cr, Pb, In, Ag, Pd, Ir, Rh, and Ru, by extraction. In this case, platinum(II) is extracted in the form of ion associates under standard conditions, whereas platinum(IV) is extracted only after the preliminary thermal treatment of the test sample. A new procedure was developed for the extraction-spectrophotometric determination of the trace amounts of platinum(II) and platinum(IV), in particular, in their mixtures.     

Extraction and separation studies of platinum(IV) with N-n-octylaniline

N-n-octylaniline in xylene is used for the extractive separation of platinum(IV) from acidic media. Platinum(IV) was extracted quantitatively with 10 ml of 3% reagent in xylene from 0.5 to 10 and 2.5 to 10 M hydrochloric and sulphuric acid, respectively. It was stripped from organic phase with water and estimated photometrically with stannous chloride. The effect of metal ion, acids, reagent concentration and of various foreign ions has been investigated. The method affords binary separation of platinum(IV) from iron(III), cobalt(II), nickel(II) and copper(II), and is applicable to the analysis of synthetic mixtures and alloys. The method is fast, accurate and precise.     

EPR spectroscopy of transformations of iridium(III) and iridium(IV) hydroxo complexes in alkaline media

Processes that occur in strong alkaline solutions of iridium(III) and iridium(IV) hydroxo complexes have been studied by EPR and electronic absorption spectroscopy. It has been demonstrated that dissolution of iridium compounds in alkaline solutions should be accompanied by a series of complicated transformations involving oxygen, which lead to the formation of several binuclear iridium(III, III), (III, IV), and (IV, IV) dioxygen complexes.     

Extraction and spectrophotometric determination of platinum(IV) using tetramethylthiuram disulfide

The extraction and photometric determination of platinum(IV) with tetramethylthiuram disulphide has been studied. Addition of an excess of stannous chloride and maintaining acidity to 2–6 M with HCl is necessary for quantitative extraction. With 10 ml of TMTD in toluene and equilibration for 30 sec, platinum is extracted as a pale yellow complex in the organic phase. It has λ_max at 348 nm and obeys Beer's law in the concentration range of 0.2 to 9.0 μg of Pt per ml. The complex is stable for 3 hr. The ratio of Pt:TMTD in the extracted species is found to be 1:1. Most of the anions and cations are tolerated in large ratio. The method can be satisfactorily applied for the determination of platinum in the presence of four- and eightfold excesses of ruthenium and osmium, respectively.     

Studies on the extraction of platinum metals with tri-iso-octylamine from hydrochloric and hydrobromic acid: separation and determination of gold, palladium and platinum

The extraction of Pd(II), Rh(III), Ir(III), Au(III) and Pt(IV) from hydrochloric and hydrobromic acid with 5% tri-iso-octylamine solution in carbon tetrachloride has been studied. The gold extract from hydrochloric acid is yellow and absorbs at 325 nm, the palladium compound is red and absorbs at 290 nm and 467 nm, and the platinum compound is blood-red and shows absorption at 268 nm. The gold, palladium and platinum extracts from hydrobromic acid are crimson. reddish brown and blood-red, with maximum absorption at 260, 345 and 300 nm respectively. Methods have been devised for the separation of gold from platinum and for its determination and also for the simultaneous determination of palladium and platinum.     

Spectrophotometric determination of ruthenium(III) and iridium(TV) with 8-hydroxyquinoIine N-oxide

The spectrophotometric characteristics and the stability constants of the yellow to brown 1:1 and 1:2 complexes of platinum metals with oxine N-oxide (existing as chloro mixed-ligand complexes) have been investigated. Oxine N-oxide can be used as a spectrophotometric reagent for ruthenium(III) and iridium(IV).     

Study on the interaction of platinum(IV), gold(III) and silver(I) ions with DNA

Fluorescence, absorption spectra have been produced by the interaction of platinum(IV), silver(I) and gold(III) ions with the berberine–DNA system (berberine, Scheme 1). Platinum(IV) and gold(III) ions show different effects from that of silver(I) ion on the spectral characteristics of the berberine–DNA system. Quenching fluorescence is seen with platinum(IV) and gold(III) ions addition, whereas increasing fluorescence is observed for silver(I) ions. The addition of gold(III) and silver(I) ions cause an increase in absorption of the berberine–DNA system. The above results suggest that different metal ions exhibit different affinities when binding to DNA correlates well with the ions’ charge, structure and the coordination ability.     

Volumetric determination of Pt(IV) in the presence of Ir,Pd, and Rh with ferrous ammonium sulfate in alkaline mannitol medium

A potentiometric reductimetric method for the determination of platinum (Pt(IV)Pt(II)) with a standard Fe(II) solution in an alkaline medium of mannitol is described. The method, the error of which does not exceed 2%, can be used in the presence of palladium, iridium, and rhodium.     

Separation and concentration of some platinum metal ions with a new chelating resin containing thiosemicarbazide as functional group

A new chelating ion-exchange resin containing thiosemicarbazide as functional group and based on macroreticular polystyrene-divinylbenzene (8%) has been prepared. Its sorption characteristics for palladium(II), platinum(IV), rhodium(III), ruthenium(III) and iridium(III) have been studied. These platinum metal ions can be quantitatively separated by sorption on this chelating resin and selective elution. The resin is highly stable in acid and alkaline solution.     

Rapid and selective determination of osmium(IV) by UV-visible spectrophotometry using o-methylphenyl thiourea as a chromogenic chelating ligand: sequential separation of osmium(IV), rhodium(III) and platinum(IV)

The objective of this research work was to develop a simple, highly sensitive and precise method for spectrophotometric determination of osmium(IV). O-Methylphenyl thiourea (OMPT) coordinates with osmium(IV) as a 1:1 (osmium(IV)–OMPT) complex in hydrochloric acid media (0.8 mol l^?1). The novelty of the investigated method is instant complex formation at room temperature with no need of heating or standing. The complex is stable for more than 8 days. The method is applicable over a wide linearity range (up to 110 µg ml^?1). A low reagent concentration is required (2 ml, 0.009 mol l^?1 in ethanol). The complex exhibits maximum absorption in the range of wavelength 510–522 nm and 514 nm was selected for further study. The molar absorptivity was 1.864 × 10³ l mol^?1 cm^?1, Sandell’s sensitivity was 0.102 µg of osmium(IV) cm^?2. Proposed method was successfully applied for separation and determination of osmium(IV) from binary and ternary synthetic mixtures containing associated metal ions. A scheme for mutual separation of osmium(IV), rhodium(III) and platinum(IV) is developed.     

Coulometric determination of uranium with a platinum working electrode

Experimental conditions have been established which enable uranium to be determined coulometrically by the reduction of uranium(VI) to uranium(IV) at a platinum working electrode, by controlled-potential or controlled-potential-limit techniques. The procedure has been used successfully as a subsidiary method in the routine determination of uranium in pure uranyl nitrate solutions. The platinum electrode has several important practical advantages over the well established mercury-pool electrode for the coulometric determination of uranium. The consecutive determination of iron(III) and uranium(VI), or plutonium(IV) and uranium(VI) can be carried out with the same working electrode in the same solution and the coulometric oxidation of uranium(IV) to uranium(VT) is practicable. The rate of stirring of the cell liquor is much less critical in the case of the platinum electrode. Two main problems had to be overcome before a practical procedure could be achieved; hydrogen evolution during the uranium(VI)-(IV) reduction had to be eliminated so that 100% current efficiency could be obtained for the desired reaction and electrode-surface poisoning phenomena had to be controlled so that reaction times could be kept reasonably short. It was found that selection of a hydrochloric acid base solution containing a small amount of bismuth(III) enabled hydrogen evolution to be avoided: also electrode-surface poisoning with this base solution was not particularly serious and could be maintained at a satisfactorily low level by occasionally anodizing the electrode in dilute sulphuric acid. Bismuth(III) forms a complex with chloride ions and its presence increases the hydrogen overvoltage at the working electrode: no visible deposit of bismuth metal forms on the electrode during the uranium reduction. Samples containing nitrate can be analysed provided sulphamic acid is added to this hydrochoric acid base solution.     

Determination of platinum(IV) by UV spectrophotometry

A simple, rapid and sensitive spectrophotometric procedure for the determination of platinum has been elaborated. Pt traces were determined in the form of the PtCl(6)(2-) complex in hydrochloric acid solution whose concentration varies from 0.01 to 2 mol L(-1) by measuring the absorbance at 260 nm. The detection limit is 4.7 x 10(-7) mol L(-1), the linearity range from 2 x 10(-6) mol L(-1) to 7 x 10(-6) mol L(-1), and the correlation coefficient is r=0.9990. No significant interferences were observed from a majority of the investigated ions, such as Zn(II), Pb(II), Mn(II), Cd(II), Co(II) and Ni(II) with the exception of Cu(II), Sb(III), Fe(III), Pd(II), Sn(II) and I(-) ions. The method was successfully applied for the determination of Pt traces in different solid samples and the recovery from inorganic materials was studied.     

Sorption of palladium(II), rhodium(III), and platinum(IV) on Fe(3)O(4) nanoparticles

The adsorption of palladium(II), rhodium(III), and platinum(IV) from diluted hydrochloric acid solutions onto Fe(3)O(4) nanoparticles has been investigated. The parameters studied include the contact time and the concentrations of metals and other solutes such as H(+) and chloride. The equilibrium time was reached in less than 20 min for all metals. The maximum loading capacity of Fe(3)O(4) nanoparticles for Pd(II), Rh(III), and Pt(IV) was determined to be 0.103, 0.149, and 0.068 mmol g(-1), respectively. A sorption mechanism for Pd(II), Rh(III), and Pt(IV) has been proposed and their conditional adsorption equilibrium constants have been determined to be logK=1.72, 1.69, and 1.84, respectively. Different compositions of eluting solution were tested for the recovery of Pt(IV), Pd(II), and Rh(III) from Fe(3)O(4) nanoparticles. It was found that 0.5 mol L(-1) HNO(3) can elute all of the metal ions simultaneously, while 1 mol L(-1) NaHSO(3) was an effective eluting solution for Rh(III), and 0.5 mol L(-1) NaClO(4) for Pt(IV). In competitive adsorption, the nanoparticles showed stronger affinity for Rh(III) than for Pd(II) and Pt(IV).     

Coulometric determination of uranium and iron or plutonium in a single aliquot using platinum working electrode

A controlled potential coulometric method developed earlier for the determination of uranium in the presence of iron or plutonium using platinum working electrode was extended for individual determination of uranium and iron or plutonium in single aliquot. After uranium determination, Fe(III) or Pu(IV) in the aliquot is reduced electrolytically to Fe(II) or Pu(III) and subsequently determined by electrolytic oxidation to Fe(III) or Pu(IV), respectively. Analysis of synthetic solutions indicated that the values for uranium, iron and plutonium obtained by this method are reproducible within±0.2% and are in good agreement with values obtained using conventional redox methods 1, 2.     

Coulometric determination of lead(II) and lead(IV) in high-T c superconductors containing copper and bismuth

The behavior of Pb(II) and Pb(IV) was studied by voltammetry in supporting electrolytes containing 0.1 M NaOH or 0.1 M NaOH + 0.1 M Na₃Cit at a graphite and a mercury thin-film electrodes. The best conditions were found for the coulometric determination of Pb by the oxidation of Pb(0) to Pb(II) in the presence of 5- to 20-fold amounts of Bi(III) and Cu(II) within the range 0.2–2 mg Pb(II) with an error and a relative standard deviation of less than 0.5%. Along with the procedure proposed previously for the determination of Pb(II) and Pb(IV) present simultaneously using a platinum gauze electrode, this procedure was applied to the determination of Pb(II) and Pb(IV) in samples of high-T_c. Cu-Bi superconductors. For samples of high-T_c. Bi-Pb-A-Cu-0 superconductors (A = Ba or Sr-Ca) containing from 2 to 12% Pb(II), the relative standard deviation was less than 0.5%; for 0.6–7% Pb(IV), it was 1-0.2%.