Hybrid materials of SBA-16 functionalized by rare earth (Eu, Tb) complexes of modified β-diketone (TTA and DBM): Covalently bonding assembly and photophysical properties

Novel mesoporous SBA-16 type of hybrids TTA-S16 and DBM-S16 were synthesized by co-condensation of modified β-diketone (TTA-Si and DBM-Si, DBM=1,3-diphenyl-1,3- propanepione, TTA=2-thenoyltrifluoroacetone) and tetraethoxysilane (TEOS) in the presence of Pluronic F127 as template, which were confirmed by FTIR, XRD, ²⁹Si CP-MAS NMR, and N₂ adsorption measurements. Novel organic-inorganic mesoporous luminescent hybrid containing RE³⁺ (Eu³⁺, Tb³⁺) complexes covalently attached to the functionalized ordered mesoporous SBA-16 (TTA-S16 and DBM-S16), which were designated as bpy-RE-TTA-S16 and bpy-RE-DBM-S16, were obtained by sol-gel process. The luminescence properties of these resulting materials were characterized in detail, and the results reveal that mesoporous hybrid material bpy-Eu-TTA-S16 present stronger luminescent intensities, longer lifetimes, and higher luminescent quantum efficiencies than the corresponding DBM-containing materials bpy-Eu-DBM-S16, while bpy-Tb-DBM-S16 exhibit the stronger characteristic emission of Tb³⁺ and longer lifetime than the corresponding TTA-containing materials bpy-Tb-TTA-S16.     

Development of a ratiometric time-resolved luminescence sensor for pH based on lanthanide complexes

Time-resolved luminescence bioassay technique using lanthanide complexes as luminescent probes/sensors has shown great utilities in clinical diagnostics and biotechnology discoveries. In this work, a novel terpyridine polyacid derivative that can form highly stable complexes with lanthanide ions in aqueous media, (4′-hydroxy-2,2′:6′,2′′-terpyridine-6,6′′-diyl) bis(methylenenitrilo) tetrakis(acetic acid) (HTTA), was designed and synthesized for developing time-resolved luminescence pH sensors based on its Eu³⁺ and Tb³⁺ complexes. The luminescence characterization results reveal that the luminescence intensity of HTTA–Eu³⁺ is strongly dependent on the pH values in weakly acidic to neutral media (pK_a = 5.8, pH 4.8–7.5), while that of HTTA–Tb³⁺ is pH-independent. This unique luminescence response allows the mixture of HTTA–Eu³⁺ and HTTA–Tb³⁺ (the HTTA–Eu³⁺/Tb³⁺ mixture) to be used as a ratiometric luminescence sensor for the time-resolved luminescence detection of pH with the intensity ratio of its Tb³⁺ emission at 540 nm to its Eu³⁺ emission at 610 nm, I_540 nm/I_610 nm, as a signal. Moreover, the UV absorption spectrum changes of the HTTA–Eu³⁺/Tb³⁺ mixture at different pHs (pH 4.0–7.0) also display a ratiometric response to the pH changes with the ratio of absorbance at 290 nm to that at 325 nm, A_290 nm/A_325 nm, as a signal. This feature enables the HTTA–Eu³⁺/Tb³⁺ mixture to have an additional function for the pH detection with the absorption spectrometry technique. For loading the complexes into the living cells, the acetoxymethyl ester of HTTA was synthesized and used for loading HTTA–Eu³⁺ and HTTA–Tb³⁺ into the cultured HeLa cells. The luminescence imaging results demonstrated the practical utility of the new sensor for the time-resolved luminescence cell imaging application.     

Energy transfer and heat-treatment effect of photoluminescence in Eu-doped TbPO4 nanowires

We have successfully synthesized Eu³⁺-doped TbPO₄ nanowires, which are orderly organized to form bundle-like structure. A thermal treatment up to 600 °C does not modify the size, shape and structure of as-synthesized sample. Due to the energy overlap between Tb³⁺ and Eu³⁺, an efficient energy transfer occurs from Tb³⁺ to Eu³⁺. The effects of Eu³⁺ concentration and thermal treatment on the luminescent properties of Eu³⁺ are investigated. The increase of Eu³⁺ concentration leads to the increase of the energy transfer efficiency from Tb³⁺ to Eu³⁺, but also enhances the probability of the interaction between neighboring Eu³⁺, which results in the concentration quenching. With the heat-treatment, the luminescence of Eu³⁺ presents an obvious increase, but almost no change for the luminescence of Tb³⁺. This difference is explained based on the TGA, DTA, and fluorescent decay dynamics analyses.     

Synthesis, vacuum ultraviolet and near ultraviolet-excited luminescent properties of GdCaAl3O7: RE (RE=Eu, Tb)

Vacuum ultraviolet (VUV) excitation and photoluminescent (PL) properties of Eu³⁺ and Tb³⁺ ion-doped aluminate phosphors, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ have been investigated. X-ray diffraction (XRD) patterns indicate that the phosphor GdCaAl₃O₇ forms without impurity phase at 900 °C. Field emission scanning electron microscopy (FE-SEM) images show that the particle size of the phosphor is less than 3 μm. Upon excitation with VUV irradiation, the phosphors show a strong emission at around 619 nm corresponding to the forced electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺, and at around 545 nm corresponding to the ⁵D₄→⁷F₅ transition of Tb³⁺. The results reveal that both GdCaAl₃O₇:RE³⁺ (RE=Eu, Tb) are potential candidates as red and green phosphors, respectively, for use in plasma display panel (PDP).     

Spectroscopic studies on the interaction of cilostazole with iodine and 2,3-dichloro-5,6-dicyanobenzoquinone

Lanthanide sensitized luminescence and chemiluminescence (CL) are of great importance because of the unique spectral properties, such as long lifetime, large Stokes shifts, and narrow emission bands characteristic to lanthanide ions (Ln³⁺). With the fluoroquinolone (FQ) compounds including enoxacin (ENX), norfloxacin (NFLX), lomefloxacin (LMFX), fleroxacin (FLRX), ofloxacin (OFLX), rufloxacin (RFX), gatifloxacin (GFLX) and sparfloxacin (SPFX), the luminescence and CL properties of Tb³⁺–FQ and Eu³⁺–FQ complexes have been investigated in this contribution. Ce⁴⁺–SO₃²⁻ in acidic conditions was taken as the CL system and sensitized CL intensities of Tb³⁺–FQ and Eu³⁺–FQ complexes were determined by flow-injection analysis. The luminescence and CL spectra of Tb³⁺–FQ complexes show characteristic peaks of Tb³⁺ at 490 nm, 545 nm, 585 nm and 620 nm. Complexes of Tb³⁺–ENX, Tb³⁺–NFLX, Tb³⁺–LMFX and Tb³⁺–FLRX display relatively strong emission intensity compared with Tb³⁺–OFLX, Tb³⁺–RFX, Tb³⁺–GFLX and Tb³⁺–SPFX. Quite weak peaks with unique characters of Eu³⁺ at 590 nm and 617 nm appear in the luminescence and CL spectra of Eu³⁺–ENX, but no notable sensitized luminescence and CL of Eu³⁺ could be observed when Eu³⁺ is added into other FQ. The distinct differences on emission intensity of Tb³⁺–FQ and Eu³⁺–FQ might originate from the different energy gap between the triplet levels of FQ and the excited levels of the Ln³⁺. The different sensitized luminescence and CL signals among Tb³⁺–FQ complexes could be attributed to different optical properties and substituents of these FQ compounds. The detailed mechanism involved in the luminescence and CL properties of Tb³⁺–FQ and Eu³⁺–FQ complexes has been investigated by analyzing the luminescence and CL spectra, quantum yields, and theoretical calculation results.     

Designing a family of luminescent hybrid materials by 3-(triethoxysilyl)-propyl isocyanate grafted 2-hydroxynicotinic acid bridge molecules

The study concentrates on the syntheses of modified 2-hydroxynicotinic acid by 3-(triethoxysilyl)-propyl isocyanate (TESPIC) and the preparation of their corresponding organic-inorganic molecular-based hybrid material with the two components equipped with covalent bonds. The bridging unit is a derivative of 2-hydroxynicotinic acid which is utilized to coordinate to Tb³⁺, Eu³⁺ or Zn²⁺ and further occurred hydrolysis and polycondensation processes by functional triethoxysilyl groups. Ultraviolet absorption, phosphorescence spectra, and luminescence spectra were applied to characterize the photophysical properties of the obtained hybrid material and the above spectroscopic data present that the triplet energy of modified 2-hydroxynicotinic acid efficiently initiates the antenna effect and matches with the emissive energy level of metal ions. As a result, the intramolecular energy transfer process completed within these molecular-based hybrids and strong green or red emissions of Ln³⁺ have been obtained.     

Preparation and luminescent properties of coordination polymers of terbium and europium with 1,4-bis-(4-methoxycarbonyl-3-hydroxyphenoxycarbonyl)butane

Physicochemical properties of new isostructural homo- and heteronuclear coordination polymers of terbium and europium with 1,4-bis-(4-methoxycarbonyl-3-hydroxyphenoxycarbonyl)butane (H₂L) differing in the composition have been studied. The Tb₂L₃·H₂O compound has exhibited efficient sensibilized green luminescence, whereas the corresponding europium-containing polymer EuL₃·H₂O has shown practically no luminescence due to mismatch of energies of the ligand triplet level and the Eu³⁺ ion emitting level. Heteronuclear terbium-europium polymers (Tb_1.5Eu_0.5L₃·H₂O, TbEuL₃·H₂O, and Tb_0.5Eu_1.5L₃·H₂O) show luminescence via the intramolecular transfer of the exiting energy from Tb³⁺ emitting level to Eu³⁺.     

Synthesis and VUV-UV spectroscopic properties of rare earth borosilicate oxyapatite: RE5Si2BO13:Ln (RE=La, Gd, Y; Ln=Eu, Tb)

Three rare earth borosilicate oxyapatites, RE₅Si₂BO₁₃ (RE=La, Gd, Y), were synthesized via wet chemical method, of which RE₅Si₂BO₁₃ (RE=Gd, Y) were first reported in this work. In the three oxyapatites, [BO₄] and [SiO₄] share the [TO₄] tetrahedral oxyanion site, and RE³⁺ ions occupy all metal sites. The differential scanning calorimetry-thermo gravimetry measurements and high temperature powder X-ray diffraction pattern revealed a vitrification process within 300-1200 °C, which was due to the glass-forming nature of borosilicates. From the VUV excitation spectra of Eu³⁺ and Tb³⁺ in RE₅Si₂BO₁₃, the optical band gaps were found to be 6.31, 6.54 and 6.72 eV for RE₅Si₂BO₁₃ (RE=La, Gd, Y), respectively. The emission and excitation bands of Eu³⁺ and Tb³⁺ are discussed relating with their coordination environments. Among the three hosts, Y₅Si₂BO₁₃ would be the best for Eu³⁺ and Tb³⁺-doped phosphors.     

Electrospinning preparation and drug delivery properties of Eu/Tb doped mesoporous bioactive glass nanofibers

Luminescent Eu³⁺/Tb³⁺ doped mesoporous bioactive glass nanofibers (MBGNFs) with average diameter of 100-120 nm were fabricated by electrospinning method. Pluronic P123 and N-cetyltrimethylammonium bromide (CTAB) were used as co-surfactants to generate porous structure of the nanofibers. N₂ adsorption-desorption measurement reveals that the MBGNF:Eu³⁺ have a surface area of 188 m² g⁻¹, a pore volume of 0.246 cm³ g⁻¹ and average pore size of 4.17 nm, and the MBGNF:Tb³⁺ have a surface area of 171 m² g⁻¹, a pore volume of 0.186 cm³ g⁻¹ and average pore size of 3.65 nm. Photoluminescence measurements reveal that the MBGNF:Eu³⁺ show strong red emission dominated by the ⁵D₀ → ⁷F₂ transition of Eu³⁺ at 614 nm with a lifetime of 1.356 ms, and MBGNF:Tb³⁺ show strong green emission dominated by the ⁵D₄ → ⁷F₅ transition of Tb³⁺ at 544 nm with a lifetime of 1.982 ms. The biocompatibility tests on L929 fibroblast cells using MTT assay reveal low cytotoxicity of MBGNF. These luminescent nanofibers show sustained release properties for ibuprofen (IBU) in vitro. The emission intensities of Eu³⁺ in the drug delivery system vary with the released amount of IBU, thus making the drug release be easily tracked and monitored by the change of the luminescence intensity.     

Rare earth (Eu, Tb) mesoporous hybrids with calix[4]arene derivative covalently linking MCM-41: Physical characterization and photoluminescence property

MCM-41 mesoporous silica has been functionalized with two kinds of macrocylic calixarene derivatives Calix[4] and Calix[4]Br (Calix[4]=P-tert-butylcalix[4]arene, Calix[4]Br=5.11,17.23-tetra-tert-butyl-25.27-bihydroxy-26.28-bibromopropoxycalix[4]arene) through condensation approach of tetraethoxysilane (TEOS) in the presence of the cetyltrimethylammonium bromide (CTAB) surfactant as a template. Novel organic-inorganic mesoporous luminescent hybrid containing RE³⁺ (Eu³⁺, Tb³⁺) complexes covalently attached to the functionalized ordered mesoporous MCM-41, which are designated as RE-Calix[4]-MCM-41 and RE-Calix[4]Br-MCM-41, respectively, are obtained by sol-gel process. It is found that they all have high surface area, uniform in the mesostructure and good crystallinity. Measurement of the photoluminescence properties show the mesoporous material covalently bonded Tb³⁺ complexes (Tb-Calix[4]-MCM-41 and Tb-Calix[4]Br-MCM-41) exhibit the stronger characteristic emission of Tb³⁺ and longer lifetime than the corresponding Eu-containing materials Eu-Calix[4]-MCM-41 and Eu-Calix[4]Br-MCM-41 due to the triplet state energy of modified organic ligands Calix[4]-Si and Calix[4]Br-Si match with the emissive energy level of Tb³⁺ very well.     

A new promising phosphor, Na3La2(BO3)3:Ln (Ln=Eu, Tb)

We present an efficient way to search a host for ultraviolet (UV) phosphor from UV nonlinear optical (NLO) materials. With the guidance, Na₃La₂(BO₃)₃ (NLBO), as a promising NLO material with a broad transparency range and high damage threshold, was adopted as a host material for the first time. The lanthanide ions (Tb³⁺ and Eu³⁺)-doped NLBO phosphors have been synthesized by solid-state reaction. Luminescent properties of the Ln-doped (Ln=Tb³⁺, Eu³⁺) sodium lanthanum borate were investigated under UV ray excitation. The emission spectrum was employed to probe the local environments of Eu³⁺ ions in NLBO crystal. For red phosphor, NLBO:Eu, the measured dominating emission peak was at 613 nm, which is attributed to ⁵D₀-⁷F₂ transition of Eu³⁺. The luminescence indicates that the local symmetry of Eu³⁺ in NLBO crystal lattice has no inversion center. Optimum Eu³⁺ concentration of NLBO:Eu³⁺ under UV excitation with 395 nm wavelength is about 30 mol%. The green phosphor, NLBO:Tb, showed bright green emission at 543 with 252 nm excited light. The measured concentration quenching curve demonstrated that the maximum concentration of Tb³⁺ in NLBO was about 20%. The luminescence mechanism of Ln-doped NLBO (Tb³⁺ and Eu³⁺) was analyzed. The relative high quenching concentration was also discussed.     

Adducts of lanthanide β-diketonates with 2,4,6-tri(2-pyridyl)-1,3,5-triazine: Synthesis,structural characterization,and photoluminescence studies

Adducts of lanthanide β-diketonates of the general formula LnL₃(TPTZ) were synthesized and structurally characterized by single crystal X-ray diffraction [Ln = Eu³⁺, Tb³⁺, Er³⁺; L is the conjugate base of dibenzoylmethane (DBM), 1-benzoylacetone (BA), thenoyltrifluoroacetone (TTA), or 4,4,4-trifluoro-1-phenyl-1,3-butanedione (BTFA); TPTZ = 2,4,6-tri(2-pyridyl)-1,3,5-triazine, a rigid Lewis base with a large π system]. The lanthanide ion in each of these complexes is nonacoordinate with six β-diketonate oxygen atoms and three TPTZ nitrogen atoms, forming a coordination polyhedron best describable as a monocapped square antiprism. Characteristic red, green, and near infrared luminescence was observed for the Eu³⁺, Tb³⁺, and Er³⁺ complexes, respectively. All complexes showed significantly enhanced luminescence quantum yields when compared with the corresponding aqua analogues, with one of the Eu³⁺ complexes displaying a quantum yield of 69.7% in chloroform.     

Photophysical Properties of Sol–gel derived Luminescent Silicone Hybrids Synthesized via Facile Amino‐Ene Reaction

Novel luminescent silicone hybrids (LSHs) containing lanthanide ions were prepared via different sol–gel processes. The precursor, dimethyl ester‐functionalized silane, was synthesized via a facile amino‐ene reaction. The coordinated assembly of the ester ligands and lanthanide ions (Eu³⁺, Tb³⁺ and Dy³⁺) occurred. The ester ligands were immobilized onto the Si‐O network backbone during the preparation of the silicone hybrid materials. The particle size can be controlled to ca 50 nm by adjusting the solvent ratio. The obtained materials were characterized by Fourier transform infrared, ¹H nuclear magnetic resonance spectroscopy (NMR), ¹³C NMR, ²⁸Si NMR, X‐ray diffraction, X‐ray photoelectron spectroscopy, thermogravimetric analysis, high‐resolution scanning electronic microscopy and luminescent (excitation and emission) spectroscopy. The coordination state and photophysical performance of the compounds were studied in detail. The terbium‐ and europium‐containing materials show sharp green and red emissions, respectively, which indicate that efficient intramolecular energy transfer took place in these LSHs.     

Homogeneous one-dimensional structured Tb(OH)3:Eu nanorods: Hydrothermal synthesis, energy transfer, and tunable luminescence properties

Nearly monodisperse, homogeneous and well-defined one-dimensional Tb_(1−x)(OH)₃:xEu³⁺ (x=0-3 mol%) nanorods have been prepared through hydrothermal method. The size of the Tb(OH)₃:Eu³⁺ rods could be modulated from nano- to micro-scale by using different amount of ammonia solution. They present highly crystallinity in spite of the moderate reaction temperature. Under ultraviolet excitation into the f→f transition of Tb³⁺ at 382 nm, Tb(OH)₃ samples show the characteristic emission of Tb³⁺ corresponding to ⁵D₄→⁷F_{6, 5, 4, 3} transitions; whereas Tb(OH)₃:Eu³⁺ samples mainly exhibit the characteristic emission of Eu³⁺ corresponding to ⁵D₀→⁷F_{1, 2, 4} transitions due to an efficient energy transfer occurs from Tb³⁺ to Eu³⁺. The increase of Eu³⁺ concentration leads to the increase of the energy transfer efficiency from Tb³⁺ to Eu³⁺. The PL colors of Tb(OH)₃:xEu³⁺ phosphors can be easily tuned from green, yellow, orange, to red by changing the doping concentration (x) of Eu³⁺.     

Crystal, electronic structures and photoluminescence properties of rare-earth doped LiSi2N3

The crystal and electronic structures, and luminescence properties of Eu²⁺, Ce³⁺ and Tb³⁺ activated LiSi₂N₃ are reported. LiSi₂N₃ is an insulator with an indirect band gap of about 5.0 eV (experimental value ∼6.4 eV) and the Li 2s, 2p states are positioned on the top of the valence band close to the Fermi level and the bottom of the conduction band. The solubility of Eu²⁺ is significantly higher than Ce³⁺ and Tb³⁺ in LiSi₂N₃ which may be strongly related to the valence difference between Li⁺ and rare-earth ions. LiSi₂N₃:Eu²⁺ shows yellow emission at about 580 nm due to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. Double substitution is found to be the effective ways to improve the luminescence efficiency of LiSi₂N₃:Eu²⁺, especially for the partial replacement of (LiSi)⁵⁺ with (CaAl)⁵⁺, which gives red emission at 620 nm, showing highly promising applications in white LEDs. LiSi₂N₃:Ce³⁺ emits blue light at about 450 nm arising from the 5d¹→4f¹5d⁰ transition of Ce³⁺ upon excitation at 320 nm. LiSi₂N₃:Tb³⁺ gives strong green line emission with a maximum peak at about 542 nm attributed to the ⁵D₄→⁷F_J (J=3-6) transition of Tb³⁺, which is caused by highly efficient energy transfer from the LiSi₂N₃ host to the Tb³⁺ ions.     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

Mechanistic Insight into Energy-Transfer Dynamics and Color Tunability of Na4CaSi3O9:Tb3+,Eu3+ for Warm White LEDs

In this work, a latent energy-transfer process in traditional Eu³⁺,Tb³⁺-doped phosphors is proposed and a new class of Eu³⁺,Tb³⁺-doped Na₄CaSi₃O₉ (NCSO) phosphors is presented which is enabled by luminescence decay dynamics that optimize the electron-transfer energy process. Relative to other Eu³⁺,Tb³⁺-doped phosphors, the as-synthesized Eu³⁺,Tb³⁺-doped NCSO phosphors show improved large-scale tunable emission color from green to red upon UV excitation, controlled by the Tb³⁺/Eu³⁺ doping ratio. Detailed spectroscopic measurements in the vacuum ultraviolet (VUV)/UV/Vis region were used to determine the Eu³⁺–O²⁻ charge-transfer energy, 4f–5d transition energies, and the energies of 4f excited multiplets of Eu³⁺ and Tb³⁺ with different 4f^N electronic configurations. The Tb³⁺→Eu³⁺ energy-transfer pathway in the co-doped sample was systematically investigated, by employing luminescence decay dynamics analysis to elucidate the relevant energy-transfer mechanism in combination with the appropriate model simulation. To demonstrate their application potential, a prototype white-light-emitting diode (WLED) device was successfully fabricated by using the yellow luminescence NCSO:0.03Tb³⁺, 0.05Eu³⁺ phosphor with high thermal stability and a BaMgAl₁₀O₁₇:Eu²⁺ phosphor in combination with a near-UV chip. These findings open up a new avenue to realize and develop multifunctional high-performance phosphors by manipulating the energy-transfer process for practical applications.     

Facile and Controllable Synthesis of Monodisperse CaF2 and CaF2:Ce3+/Tb3+ Hollow Spheres as Efficient Luminescent Materials and Smart Drug Carriers

Highly uniform and well‐dispersed CaF₂ hollow spheres with tunable particle size (300–930 nm) have been synthesized by a facile hydrothermal process. Their shells are composed of numerous nanocrystals (about 40 nm in diameter). The morphology and size of the CaF₂ products are strongly dependent on experimental parameters such as reaction time, pH value, and organic additives. The size of the CaF₂ hollow spheres can be controlled from 300 to 930 nm by adjusting the pH value. Nitrogen adsorption–desorption measurements suggest that mesopores (av 24.6 nm) exist in these hollow spheres. In addition, Ce³⁺/Tb³⁺‐codoped CaF₂ hollow spheres can be prepared similarly, and show efficient energy transfer from Ce³⁺ to Tb³⁺ and strong green photoluminescence of Tb³⁺ (541 nm, ⁵D₄→⁷F₅ transition of Tb³⁺, the highest quantum efficiency reaches 77 %). The monodisperse CaF₂:Ce³⁺/Tb³⁺ hollow spheres also have desirable properties as drug carriers. Ibuprofen‐loaded CaF₂:Ce³⁺/Tb³⁺ samples still show green luminescence of Tb³⁺ under UV irradiation, and the emission intensity of Tb³⁺ in the drug‐carrier system varies with the released amount of ibuprofen, so that drug release can be easily tracked and monitored by means of the change in luminescence intensity. The formation mechanism and luminescent and drug‐release properties were studied in detail.     

Mono- and Mixed Metal Complexes of Eu3+, Gd3+, and Tb3+ with a Diketone,Bearing Pyrazole Moiety and CHF2-Group: Structure,Color Tuning,and Kinetics of Energy Transfer between Lanthanide Ions

Three novel lanthanide complexes with the ligand 4,4-difluoro-1-(1,5-dimethyl-1H-pyrazol-4-yl)butane-1,3-dione (HL), namely [LnL₃(H₂O)₂], Ln = Eu, Gd and Tb, were synthesized, and, according to single-crystal X-ray diffraction, are isostructural. The photoluminescent properties of these compounds, as well as of three series of mixed metal complexes [Eu_xTb_1-xL₃(H₂O)₂] (Eu_xTb_1-xL₃), [EuxGd_1-xL₃(H₂O)₂] (Eu_xGd_1-xL₃), and [Gd_xTb_1-xL₃(H₂O)₂] (Gd_xTb_1-xL₃), were studied. The Eu_xTb_1-xL₃ complexes exhibit the simultaneous emission of both Eu³⁺ and Tb³⁺ ions, and the luminescence color rapidly changes from green to red upon introducing even a small fraction of Eu³⁺. A detailed analysis of the luminescence decay made it possible to determine the observed radiative lifetimes of Tb³⁺ and Eu³⁺ and estimate the rate of excitation energy transfer between these ions. For this task, a simple approximation function was proposed. The values of the energy transfer rates determined independently from the luminescence decays of terbium(III) and europium(III) ions show a good correlation.     

A Lanthanide‐Complex‐Based Ratiometric Luminescent Probe Specific for Peroxynitrite

A lanthanide‐complex‐based ratiometric luminescence probe specific for peroxynitrite (ONOO^?), 4′‐(2,4‐dimethoxyphenyl)‐2,2′:6′,2′′‐terpyridine‐6,6′′‐diyl]bis(methylenenitrilo)tetrakis(acetate)‐Eu³⁺/Tb³⁺ ([Eu³⁺/Tb³⁺(DTTA)]), has been designed and synthesized. Both [Eu³⁺(DTTA)] and [Tb³⁺(DTTA)] are highly water soluble with large stability constants at ≈10²⁰, and strongly luminescent with luminescence quantum yields of 10.0 and 9.9 %, respectively, and long luminescence lifetimes of 1.38 and 0.26 ms, respectively. It was found that the luminescence of [Tb³⁺(DTTA)] could be quenched by ONOO^? rapidly and specifically in aqueous buffers, while that of [Eu³⁺(DTTA)] did not respond to the addition of ONOO^?. Thus, by simply mixing [Eu³⁺(DTTA)] and [Tb³⁺(DTTA)] in an aqueous buffer, a ratiometric luminescence probe specific for time‐gated luminescence detection of ONOO^? was obtained. The performance of [Tb³⁺(DTTA)] and [Eu³⁺/Tb³⁺(DTTA)] as the probes for luminescence imaging detection of ONOO^? in living cells was investigated. The results demonstrated the efficacy and advantages of the new ratiometric luminescence probe for highly sensitive luminescence bioimaging application.