Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

Ruthenium-catalyzed transfer hydrogenation of aromatic ketones with aminophosphine or bis(phosphino)amine ligands derived from isopropyl substituted anilines

A series of new highly active Ru(II) complexes with two new (N-diphenylphosphino)isopropylanilines, having an isopropyl substituent at carbon 2- (1) or 2,6- (2) and two new bis(diphenylphosphino)isopropylanilines, having an isopropyl substituent at carbon atom 2- (3) or 4- (4), were prepared starting from the dimeric complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂. All the compounds have been fully characterized by microanalysis, IR, ³¹P{1H} NMR, ¹H NMR and ¹³C NMR spectroscopies. Following activation by NaOH, complexes 5–8 were tested in the transfer hydrogenation of acetophenone derivatives with iso-PrOH as the hydrogen source. Catalytic studies showed that the complexes are excellent catalytic precursors for the transfer hydrogenation of acetophenone derivatives.     

Ruthenium complexes of aminophosphine ligands and their use as pre-catalysts in the transfer hydrogenation of aromatic ketones: X-ray crystal structure of thiophene-2-(N-diphenylthiophosphino)methylamine

Reaction of thiophene-2-methylamine with one or two equivalents of PPh₂Cl in the presence of NEt₃, proceeds in thf to give thiophene-2-(N-diphenylphosphino)methylamine, 1a and thiophene-2-(N,N-bis(diphenylphosphino))methylamine, 2a respectively, under anaerobic conditions. Oxidations of 1a and 2a with aqueous hydrogen peroxide, elemental sulfur or gray selenium in thf gives the corresponding oxides, sulfides and selenides [Ph₂P(E)NHCH₂-C₄H₃S] (E: O 1b, S 1c, Se 1d) and [(Ph₂P(E))₂NCH₂-C₄H₃S], (E: O 2b, S 2c, Se 2d) respectively, in high yield. Furthermore, two novel Ru(II) complexes with the P-N ligands 1a and 2a were synthesized starting with the complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂. The complexes were fully characterized by analytical and spectroscopic methods. ³¹P-{¹H} NMR, DEPT, ¹H-¹³C HETCOR or ¹H-¹H COSY correlation experiments were used to confirm the spectral assignments. The molecular structure of thiophene-2-(N-diphenylthiophosphino)methylamine was also elucidated by single-crystal X-ray crystallography. Following activation by NaOH, compounds 3 and 4 catalyze the transfer hydrogenation of acetophenone derivatives to 1-phenylethanol derivatives in the presence of iso-PrOH as the hydrogen source. [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-p-cymene)Cl₂], 3 and [Ru((PPh₂)₂NCH₂-C₄H₃S)(η⁶-p-cymene)Cl]Cl, 4 complexes are suitable catalyst precursors for the transfer hydrogenation of acetophenone derivatives in 0.1 M iso-PrOH solution. Notably 4 acts as an excellent catalyst giving the corresponding alcohols in excellent conversions up to 99% (TOF ? 744 h⁻¹). This transfer hydrogenation is characterized by low reversibility under the experimental conditions.     

Half‐sandwich Ru (II) complexes containing (N,O) Schiff base ligands: Catalysts for base‐free transfer hydrogenation of ketones

Two new half‐sandwich Ru (II)(p‐cymene) complexes ( 1 and 2 ) containing dopamine‐based (N, O) Schiff base ligands ( L ¹ H and L ² H ) were synthesized and characterized by FT‐IR, UV–Visible and ¹H & ¹³C NMR spectral techniques, and elemental analyses. The spectroscopic and analytical data revealed monobasic bidentate coordination of the ligands with Ru ion. The molecular structures of L ¹ H , L ² H and 2 were further confirmed by single crystal X‐ray diffraction study. Complexes 1 and 2  have been employed as catalysts in the transfer hydrogenation of ketones using 2‐propanol as a hydrogen source at 85 °C under base‐free condition. Good to the excellent yield of secondary alcohols, gram scale synthesis, and high TON and TOF made this catalytic system interesting.     

Axial [6,6′-(2,4-pentadioxy)]-1,1′-biphenyl-2,2′-diamine (PD-BIPHAM): practical synthesis and applications in asymmetric hydrogenation

A rapid, reliable, and atom-economical procedure for the novel axially biphenyl diamine, (R,R,S_ax)-PD-BIPHAM 1, has been developed successfully by using highly efficient central-to-axial transformation strategy. The attractive feature of this methodology is that no tedious resolution was needed. The effectiveness of this new chiral skeleton was initially demonstrated by highly enantioselective hydrogenation of α-dehydroamino acid esters.     

Chromium, iron, ruthenium and gold complexes of 3,3-(biphenyl-2,2′-diyl)-1-diphenylphosphino-1-phenylallene: A versatile ligand

Successive treatment of 9-(phenylethynyl)fluoren-9-ol (1a), with HBr, butyllithium and chlorodiphenylphosphine furnishes 3,3-(biphenyl-2,2′-diyl)-1-diphenylphosphino-1-phenylallene (5). Moreover, reaction of 1a directly with chlorodiphenylphosphine yields the corresponding allenylphosphine oxide (6). The allenylphosphine (5), and Fe₂(CO)₉ initially form the phosphine-Fe(CO)₄ complex, 11, which is very thermally sensitive and readily loses a carbonyl ligand. In the resulting phosphine-Fe(CO)₃ system, 12, the additional site at iron is coordinated by the allene double bond adjacent to phosphorus; the Fe(CO)₃ tripod in 12 exhibits restricted rotation on the NMR time-scale even at room temperature. The corresponding chromium complex, (5)-Cr(CO)₅ (9), has also been prepared. The gold complexes (5)-AuCl (13), and [(5)-Au(THT)]⁺ X⁻, where (THT) is tetrahydrothiophene, and X = PF₆ (14a), or ClO₄ (14b), are analogous to the known triphenylphosphine-gold complexes. In contrast, in the (arene)(allenylphosphine)RuCl₂ system the allene double bond adjacent to phosphorus displaces a chloride, and the resulting cationic species undergoes nucleophilic attack by water yielding ultimately a five-membered Ru-P-CC-O ruthenacycle (17). Thus, the allenylphosphine (5), reacts initially as a conventional mono-phosphine but, when the metal centre has a readily displaceable ligand such as a carbonyl or halide, the allene double bond adjacent to the phosphorus can also function as a donor. X-ray crystal structures are reported for 5, 6, 11, 12, 13, 14a, 14b and 17.     

Transfer hydrogenation of ketones catalysed by half‐sandwich (η6‐p‐cymene) ruthenium(II) complexes incorporating benzoylhydrazone ligands

Neutral half‐sandwich η⁶‐p ‐cymene ruthenium(II) complexes of general formula [Ru(η⁶‐p ‐cymene)Cl(L)] (HL = monobasic O, N bidendate benzoylhydrazone ligand) have been synthesized from the reaction of [Ru(η⁶‐p ‐cymene)(μ‐Cl)Cl]₂ with acetophenone benzoylhydrazone ligands. All the complexes have been characterized using analytical and spectroscopic (Fourier transform infrared, UV–visible, ¹H NMR, ¹³C NMR) techniques. The molecular structures of three of the complexes have been determined using single‐crystal X‐ray diffraction, indicating a pseudo‐octahedral geometry around the ruthenium(II) ion. All the ruthenium(II) arene complexes were explored as catalysts for transfer hydrogenation of a wide range of aromatic, cyclic and aliphatic ketones with 2‐propanol using 0.1 mol% catalyst loading, and conversions of up to 100% were obtained. Further, the influence of other variables on the transfer hydrogenation reaction, such as base, temperature, catalyst loading and substrate scope, was also investigated.     

Determination of sophoridine and related lupin alkaloids using tris(2,2′-bipyridine)ruthenium electrogenerated chemiluminescence

Electrogenerated chemiluminescences (ECLs) based on tris(2,2′-bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) and lupin alkaloids, for instance, sophoridine (SRI), matrine (MT), sophoranol (SR) and sophocarpine (SC) in an aqueous alkaline buffer solution (pH 9.0) are studied. The light emission is mainly caused by an electro-oxidation reaction between tertiary amino group on the alkaloid compounds and Ru(bpy)₃²⁺ in a thin layer flow cell equipped with a glassy carbon disc electrode (22.1 mm²) at the potential of +1.50 V (versus Ag/AgCl). The luminescence wavelength of 610 nm confirmed that ECL is caused by Ru(bpy)₃^2+∗ to its ground state. ECL intensities of these lupin alkaloids are affected by the substituent character, three-dimensional conformation of hydrogen on β-carbon atom. Ionization potentials taken from calculation data further confirm the experimental results. In addition, the factors affecting the determination and HPLC separation of the four alkaloids are also investigated.     

Cationic and neutral ruthenium(II) complexes containing both arene or Cp* and functionalized aminophosphines. Application to hydrogenation of aromatic ketones

Hydrogen transfer reduction processes are attracting increasing interest from synthetic chemists in view of their operational simplicity. For this aim, a series of novel Ru(II) complexes with the P-N-P ligands were synthesized starting from the complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ or [RuCp*Cl(COD)]. The complexes were fully characterized by analytical and spectroscopic methods. ³¹P-{¹H} NMR, DEPT, ¹H-¹³C HETCOR or ¹H-¹H COSY correlation experiments were used to confirm the spectral assignments. Complexes 5, 6 and 7 catalyze the transfer hydrogenation of acetophenone derivatives to 1-phenylethanol derivatives in the presence of iso-PrOH as the hydrogen source. Catalytic studies showed that all complexes are excellent catalytic precursors for the transfer hydrogenation of acetophenone derivatives in 0.1 M iso-PrOH solution. Notably 5 acts as an excellent catalyst giving the corresponding alcohols in excellent conversions up to 99% (TOF ≤ 492 h⁻¹).     

Organometallic ruthenium, rhodium and iridium complexes containing a P-bound thiophene-2-(N-diphenylphosphino)methylamine ligand: Synthesis, molecular structure and catalytic activity

Reaction of Ph₂PNHCH₂-C₄H₃S with [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂, [Ru(η⁶-benzene)(μ-Cl)Cl]₂, [Rh(μ-Cl)(cod)]₂ and [Ir(η⁵-C₅Me₅)(μ-Cl)Cl]₂ yields complexes [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-p-cymene)Cl₂], 1, [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-benzene)Cl₂], 2, [Rh(Ph₂PNHCH₂-C₄H₃S)(cod)Cl], 3 and [Ir(Ph₂PNHCH₂-C₄H₃S)(η⁵-C₅Me₅)Cl₂], 4, respectively. All complexes were isolated from the reaction solution and fully characterized by analytical and spectroscopic methods. The structure of [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-benzene)Cl₂], 2 was also determined by single crystal X-ray diffraction. 1-4 are suitable precursors forming highly active catalyst in the transfer hydrogenation of a variety of simple ketones. Notably, the catalysts obtained by using the ruthenium complexes [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-p-cymene)Cl₂], 1 and [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-benzene)Cl₂], 2 are much more active in the transfer hydrogenation converting the carbonyls to the corresponding alcohols in 98-99% yields (TOF ≤ 200 h⁻¹) in comparison to analogous rhodium and iridium complexes.     

Further ‘tethered’ Ru(II) catalysts for asymmetric transfer hydrogenation (ATH) of ketones; the use of a benzylic linker and a cyclohexyldiamine ligand

The synthesis and characterisation of two new Ru(II) catalysts for the asymmetric transfer hydrogenation (ATH) of ketones is described. In the case of 4, the novelty lies in the use of a benzyl tethering group between the asymmetric ligand part (TsDPEN) and the η⁶-arene ring, which increases the complex rigidity. For 5, the use of a cyclohexyldiamine as a chiral ligand is described for the first time. In the ATH of ketones in formic acid/triethylamine, alcohols with ees of up to 97% were formed.     

Two pseudo-N3 ligands and the catalytic activity of their ruthenium(II) complexes in transfer hydrogenation and hydrogenation of ketones

Complex RuCl₂(PPh₃)(iBu-BTP) (5) was synthesized by the reaction of 2,6-bis(5,6-bis(iso-butyl)-1,2,4-triazin-3-yl)pyridine (iBu-BTP) and RuCl₂(PPh₃)₃ in refluxing toluene, and its molecular structure was confirmed by X-ray crystallographic determination. Complex 5 was applied as a catalyst for transfer hydrogenation of ketones and exhibited catalytic activity comparable to RuCl₂(PPh₃)(Me₄BPPy) (1) (Me₄BPPy = bis(3,5-dimethylpyrazol-1-yl)pyridine) in some cases. The difference between the catalytic activity of 5 and 1 is attributed to the significantly different arrangement and positions of the PPh₃ and chlorides and also to the different electron density on the N-heterocycles. Complex 1 exhibited good to excellent catalytic activity in hydrogenation of ketones under mild conditions. These results have suggested new applications of iBu-BTP and Me₄BPPy as promising planar tridentate pseudo-N₃ ligands to construct highly active transition-metal catalysts.     

Biphasic asymmetric hydroformylation and hydrogenation by water-soluble rhodium and ruthenium complexes of sulfonated (R)-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl in ionic liquids

A biphasic catalytic system with water-soluble rhodium complexes of sulfonated (R)-2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (labeled as (R)-BINAPS) in ionic liquid BMI·BF₄ has been developed for the asymmetric hydroformylation of vinyl acetate under mild conditions. The corresponding ruthenium complexes have been investigated for the biphasic asymmetric hydrogenation of dimethyl itaconate. The biphasic asymmetric hydroformylation of vinyl acetate provided 28.2% conversion and 55.2% enantiomeric excess when BMI·BF₄–toluene was used as the reaction medium at 333 K and 1.0 MPa for 24 h. The biphasic asymmetric hydrogenation of dimethyl itaconate in BMI·BF₄–ⁱPrOH at 333 K and 2.0 MPa afforded 65% enantiomeric excess with an activity similar to the homogenous analogs. Both biphasic catalytic systems with (R)-BINAPS ligand could be reused several times without significantly decrease in the activity, enantio- and regio-selectivities. The effects of properties of ionic liquid, molar ratio of ligand to rhodium, temperature, pressure and reaction time have been discussed.     

Catalytic transfer hydrogenation of ketones catalyzed by orthometalated ruthenium(III) 2-(arylazo)phenolate complexes containing triphenylarsine

Air-stable, mononuclear orthometalated ruthenium(III) 2-(arylazo)phenolate complexes of the general composition [RuX(AsPh₃)₂(L)] (X = Cl or Br; L = CNO donor of the 2-(arylazo)phenolate ligands) have been synthesized and characterized by IR, UV-vis, and EPR as well as by elemental analysis. One of the complexes [RuBr(AsPh₃)₂(azo-OMe)] was structurally characterized by X-ray analysis and was found to be an efficient catalyst for the transfer hydrogenation of ketones with excellent conversion in the presence of isopropanol at 80 °C in 1 h.     

Synthesis,structure and reactivity of novel palladiumdichloride-2,2′-bipyridine with 4,4′-bis(fluorous-ponytail)

With the readily available fluorous alkanols R_fCH₂OH, a series of novel fluorous-ponytailed bpy ligands, 4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy (1a–e), were prepared and treated with [PdCl₂(CH₃CN)₂] to result in the corresponding novel Pd complexes [PdCl₂(4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy)] (2a–e) where R_f = n-C₃F₇ (a), HCF₂(CF₂)₃ (b), HCF₂(CF₂)₇ (c), n-C₈F₁₇ (d), n-C₁₀F₂₁ (e). The new ligands and Pd complexes were spectroscopically characterized by multi-nuclei NMR (¹H, ¹⁹F and ¹³C), FTIR and high resolution mass (FAB). The structure for the Pd complex 2b, the first with fluorinated ponytails on bpy and not on phosphine, was also established by a single crystal X-ray diffraction study. The TGA data of both ligands and Pd complexes indicated that the Pd-complexes were resistant to higher temperatures than the corresponding ligands. The Pd catalysts derived from 2a–c showed an almost quantitative conversion and could be reused for eight runs with Heck reactions, in that the products and unspent reactants were directly removed by distillation. With the highest fluorine content in the series, Pd complex 2e was successfully applied in the Heck reaction using the fluorous biphasic catalysis strategy.     

Mono and dinuclear rhodium, iridium and ruthenium complexes containing chelating 2,2′-bipyrimidine ligands: Synthesis, molecular structure, electrochemistry and catalytic properties

The mononuclear cations [(η⁵-C₅Me₅)RhCl(bpym)]⁺ (1), [(η⁵-C₅Me₅)IrCl(bpym)]⁺ (2), [(η⁶-p-PrⁱC₆H₄Me)RuCl(bpym)]⁺ (3) and [(η⁶-C₆Me₆)RuCl(bpym)]⁺ (4) as well as the dinuclear dications [{(η⁵-C₅Me₅)RhCl}₂(bpym)]²⁺ (5), [{(η⁵-C₅Me₅)IrCl}₂(bpym)]²⁺ (6), [{(η⁶-p-PrⁱC₆H₄Me)RuCl}₂(bpym)]²⁺ (7) and [{(η⁶-C₆Me₆)RuCl}₂(bpym)]²⁺ (8) have been synthesised from 2,2′-bipyrimidine (bpym) and the corresponding chloro complexes [(η⁵-C₅Me₅)RhCl₂]₂, [(η⁵-C₅Me₅)IrCl₂]₂, [(η⁶-PrⁱC₆H₄Me)RuCl₂]₂ and [(η⁶-C₆Me₆)RuCl₂]₂, respectively. The X-ray crystal structure analyses of [3][PF₆], [5][PF₆]₂, [6][CF₃SO₃]₂ and [7][PF₆]₂ reveal a typical piano-stool geometry around the metal centres; in the dinuclear complexes the chloro ligands attached to the two metal centres are found to be, with respect to each other, cis oriented for 5 and 6 but trans for 7. The electrochemical behaviour of 1-8 has been studied by voltammetric methods. In addition, the catalytic potential of 1-8 for transfer hydrogenation reactions in aqueous solution has been evaluated: All complexes catalyse the reaction of acetophenone with formic acid to give phenylethanol and carbon dioxide. For both the mononuclear and dinuclear series the best results were obtained (50 °C, pH 4) with rhodium complexes, giving turnover frequencies of 10.5 h⁻¹ for 1 and 19 h⁻¹ for 5.     

Synthesis of aryl/alkyl(2,2′-bis-3-methylindolyl)methanes and aryl(3,3′-bis indolyl)methanes promoted by secondary amine based ionic liquids and microwave irradiation

Aryl/alkyl(2,2′-bis-3-methylindolyl)methanes and aryl(bis-3,3′-indolyl)methanes are synthesized in high yield using ionic liquids mediated by microwave. Reaction conditions and product recovery are simple and ionic liquids could be recycled.     

Transfer hydrogenation of ketones catalyzed by 2,6‐bis(triazinyl)pyridine ruthenium complexes: The influence of alkyl arms

The transfer hydrogenation of ketones catalyzed by transition metal complexes has attracted much attention. A series of ruthenium(II) complexes bearing 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine ligands (R-BTPs) were synthesized and characterized by NMR analysis and X-ray diffraction. These ruthenium(II) complexes were applied in the transfer hydrogenation of ketones. Their different catalytic activity were attributed to the alkyl arms on the 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine. As the length of the alkyl arms rising, the catalytic activities of the complex catalysts decreased. By means of 0.4 mol % catalyst RuCl₂(PPh₃)(3-methylbutyl-BTP) in refluxing 2-propanol, a variety of ketones were reduced to their corresponding alcohols with >95% conversion over a period of 3 h. © 2019 Elsevier Science. All rights reserved.     

Chemiluminescence reactions with cationic, neutral, and anionic ruthenium(II) complexes containing 2,2′-bipyridine and bathophenanthroline disulfonate ligands

Ruthenium complexes containing 4,7-diphenyl-1,10-phenanthroline disulfonate (bathophenanthroline disulfonate; BPS) ligands, Ru(BPS)₃⁴⁻, Ru(BPS)₂(bipy)²⁻ and Ru(BPS)(bipy)₂, were compared to tris(2,2′-bipyridine)ruthenium(II) (Ru(bipy)₃²⁺), including examination of the wavelengths of maximum absorption and corrected emission intensity, photoluminescence quantum yield, stability of their oxidised ruthenium(III) form, and relative chemiluminescence intensities and signal-to-blank ratios with cerium(IV) sulfate and six analytes (codeine, morphine cocaine, potassium oxalate, furosemide and hydrochlorothiazide) in acidic aqueous solution. The presence of BPS ligands in the complex increased the photoluminescence quantum yield, but decreased the stability of the oxidised form of the reagent. In contrast to previous evidence showing much greater electrochemiluminescence intensities using Ru(BPS)₂(bipy)²⁻ and Ru(BPS)(bipy)₂, these complexes did not provide superior chemiluminescence signals than their homoleptic analogues.